M3N5WY7777AAutomobile Security Transmitter

Re: Certification for Siemens Transmitter Model/PN(s): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, and 15780253 FCC ID: M3N5WY7777A IC: 267F-5WY7777A USER'S MANUAL INFORMATION (PRELIMI)ARY) The User's Manual is in preparation. The following material will be contained in the manual: FCC ID:M3N5WY7777A IC: 267F-5WY7777A
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

RF Radio Signal LF Radio Signal ATIC37 FULLTDK5xxxF Buttons Input RDATA RFON XCLK_PULL XCLK Battery Crystal RF Antenna on the PCB RF_POWER Power Amplifier Output IN1IN2 IN3 LF Inductive antennas 315 MHz 125 kHz 9.844 MHz

Re: Certification for Siemens Transmitter FCC ID: M3N5WY7777A IC: 267F-5WY7777A REQUEST FOR CONFIDENTIALITY Pursuant to 47 CRF 0.457(d) and 0.459, Siemens requests that a part of the subject application be held confidential. Type
of
Confidentiality
Requested
Exhibit
Short Term Permanent (1) ID Label & Location Short Term Permanent (3) External Photos Short Term Permanent (4) Block Diagram Short Term Permanent (5) Schematics Short Term Permanent (7) Test Setup Photos Short Term Permanent (8) User’s Manual Short Term Permanent (9) Internal Photos Short Term Permanent (10) Parts List & Placement Short Term Permanent (11) RF Exposure Short Term Permanent (12) Description of Operation Siemens has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent
Confidentiality:
Siemens requests the exhibits listed above as permanently confidential be permanently withheld from public review. ShortTerm
Confidentiality:
Siemens requests the exhibits selected above as short term confidential be withheld from public view for a period of 45 days from the date of the Grant of Equipment Authorization and prior to marketing. If there are any questions regarding this request, please contact me at the above address or call 734-483-4211, fax 734-647-2106 or e-mail [email protected]. Sincerely, Valdis V. Liepa, Research Scientist University of Michigan April 23, 2007 Re: Certification for Siemens Transmitter Model/PN(s): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, and 15780253 FCC ID: M3N5WY7777A IC: 267F-5WY7777A STATEMENT OF MODIFICATIONS There were no modifications made to the DUT by this test laboratory. (Also see Section 3.1 of the attached Test Report). _____________________ Valdis V. Liepa Research Scientist Re: Certification for Siemens Transmitter Model/PN(s): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, and 15780253 FCC ID: M3N5WY7777A IC: 267F-5WY7777A GENERAL PRODUCT INFORMATION The device, for which certification is pursued, has been designed by: Siemens VDO Automotive 4685 Investment Drive Troy, MI 48098 Contact: Charlie Muma [email protected] Tel: (248) 763-6783 Fax: (248) 764-7183 It will be manufactured by: Siemens VDO Automotive 4685 Investment Drive Troy, MI 48098 Contact: Charlie Muma [email protected] Tel: (248) 763-6783 Fax: (248) 764-7183 Canadian Contact: Siemens Automotive Ltd. 2775 St. Etienne Boulevard Windsor ,ON N8W 5B1 Contact: Kurt Van Drus [email protected] Tel: (519)974-5400 Fax:(519)974-5401 Re: Certification for Siemens Transmitter Model/PN(s): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, and 15780253 FCC ID: M3N5WY7777A IC: 267F-5WY7777A POWER OF ATTORNEY A letter granting Valdis V. Liepa the Power of Attorney is on file and can be provided when so requested.

RSS-102 Annex A – RF Technical Brief Cover Sheet Application and Agreement Form for Industry Canada Certification Services APPLICANT & ADDRESS: Siemens VDO Automotive 4685 Investment Drive Troy, MI 48098 LEGAL STATUS: Corporation, LLC CONTACT NAME: Charlie Muma EMAIL ADDRESS: [email protected] TELEPHONE NO.: (248) 763-6783 FACSIMILE NO.: (248) 764-7183 MANUFACTURER & ADDRESS: Siemens VDO Automotive 4685 Investment Drive Troy, MI 48098 CONTACT NAME: Charlie Muma EMAIL ADDRESS: [email protected] TELEPHONE NO.: (248) 763-6783 FACSIMILE NO.: (248) 764-7183 CANADIAN REPRESENTATIVE & ADDRESS: Siemens Automotive Ltd. 2775 St. Etienne Boulevard Windsor ,ON N8W 5B1 CONTACT NAME: Kurt Van Drus EMAIL ADDRESS: [email protected] TELEPHONE NO.: (519)974-5400 FACSIMILE NO.: (519)974-5401 CERTIFICATION NUMBER consisting of COMPANY NUMBER AND UPN NUMBER: 267F-5WY7777A MODEL / PART NUMBER(S): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, 15780253 SPECIFICATION STANDARD: RSP-100 / 102 / 210 / GEN and Issue No.: 6, September 2005 TYPE OF SERVICE: NEW FAMILY AGREEMENT: THE APPLICANT AGREES TO: (i) Accept responsibility for all ATCB charges arising from this application; (ii) Meet all requirements in accordance with Radio Standards Procedure 100 and other applicable procedures; (iii) Warrant that the test results submitted are a true representation of the characteristics of the radio equipment type for which certification is requested; (iv) Inform ATCB of any changes to the information submitted NAME AND TITLE OF APPLICANT (PLEASE PRINT OR TYPE): Dr. Valdis V. Liepa, Research Scientist SIGNATURE OF APPLICANT: DATE: 4/23/2007 Note: This form must be completed and provided with the submission COMPANY NUMBER OF APPLICANT: 267F MODEL / PART NUMBER(S): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, 15780253 TYPE OF EQUIPMENT (Refer to List on Following Pages): Low Power Transmitter MANUFACTURER: Siemens VDO Automotive TESTED TO RADIO STANDARD SPECIFICATIONS (RSS) NO.: 210, GEN, 102 OPEN AREA TEST SITE INDUSTRY CANADA NUMBER: 2057 NAME OF TESTING LAB: ADDRESS OF TESTING LAB: University of Michigan / EECS 3228 EECS Building 1301 Beal Avenue Ann Arbor, Michigan 48109- 2122 USA TEST REPORT NUMBER(S) AND DATE: 415031-354 LIST OF ACCESSORIES WITH WHICH THE DEVICE WAS TESTED: None LIST OF OPERATIONAL FEATURES: Transmitter FREQUENCY RANGE (fixed frequency or from - to -): 315 MHz R.F. POWER IN WATTS (conducted/ERP/EIRP): Type: Min: Max: Stepped (Y/N): Step Value: FIELD STRENGTH (at what distance): 74.6 dBuV/m @ 3m, 315 MHz GAIN OF ANTENNAS CERTIFIED WITH THIS DEVICE: Integral OCCUPIED BANDWIDTH (99% BW): 148 kHz TYPE(S) OF MODULATION: AM, FSK EMISSION DESIGNATOR (See TRC-43 for detail): 148kL1D TRANSMITTER SPURIOUS (worst case): 39.5 dBuV/m @ 3m, 630 MHz RECEIVER SPURIOUS (worst case): ATTESTATION: I declare that the testing was performed or supervised by me; that the test measurements were made in accordance with the above- mentioned Industry Canada standard(s); and that the equipment identified in this application has been subjected to all the applicable test conditions specified in the Industry Canada standards and all of the requirements of the standard have been met. Signature: Date: 4/23/2007 NAME AND TITLE (Please print or type): Dr. Valdis V. Liepa, Research Scientist Note 1: This form must be completed and provided with the submission Note 2: This form must accompanied by an attestation letter from the applicant. Note 3: If agent is used, this form must also be accompanied by an agent authorization from the applicant.



ATTESTATION: I attest: a) that when SAR or RF Exposure Evaluation testing is required and has been performed, that the information provided in Annex A is correct; b) that a Technical Brief was prepared and the information it contains is correct; that the device evaluation was performed or supervised by me; that applicable measurement methods and evaluation methodologies have been followed and that the device meets the SAR and/or RF exposure limits of RSS-102. Signature: Date: 4/23/2007 NAME (Please print or type): Dr. Valdis V. Liepa TITLE (Please print or type): Research Scientist COMPANY (Please print or type): University of Michigan / EECS Note 1: To obtain approval under this Standard, each application for certification shall be accompanied by the duly completed RF technical brief cover sheet (see Annex A) and a properly signed declaration of compliance (see Annex B). However, if the device in question meets the exemption from routine evaluation limits of Sections 2.5.1 or 2.5.2, only a properly signed declaration of compliance (Annex B) shall be submitted. Note 2: Although submission of the RF exposure technical brief is not required for certification, it shall be made available upon request, for as long as the device model is marketed in Canada. Note 3: In cases of exemption according to RSS-102, the information contained in the RF exposure technical brief may be limited to information that demonstrates how the e.i.r.p. or output power was derived. American Telecommunications Certification Body Inc. 6731 Whittier Ave, McLean, VA 22101 SECTION I - ALL ITEMS IN THIS SECTION MUST BE COMPLETED 1. Applicant’s complete, legal business name Siemens VDO Automotive FRN Number 0006725386 Engineer: 2. Applicant’s mailing address (Line 1) 4685 Investment Drive Troy, MI 48098 Examiner: 3. FCC ID: (b) Equipment Product Code (a) Grantee Code (14 characters maximum) M
3
)
5WY7777A
4. Name, Title and Mail Stop, if any, of person at the applicant’s address to receive grant, or for contact: (See instructions) Charlie Muma 5. (a) Telephone No. (Area/Country/City Code, No. and Ext.) (b) FAX No. (Area/Country/City Code and No.) (248) 763-6783 (248) 764-7183 (c) Internet e-mail address: [email protected] SECTION II – CONTACT INFORMATION 1.(a) Instead of Applicant, original Grant shall be mailed to: Firm Name, Number, street, City,…

Text truncated - open the document above for the full version.

GM/S: 15294306 FCC ID: M3N5WY7777A IC: 267F-5WY7777A Trade Name

General Description The Corporate Fob system consists of a RF transmitter integrated into the key and a RF receiver mounted within the control unit. The transmitter is used to transmit information to the receiver for locking, unlocking, opening the trunk, starting the vehicle, and Panic function. RF messages can be transmitted by one of two means. The keypad on the key can be used for locking, unlocking, unlocking the trunk, panic, and remote start (5 button version). Lifting the door handle or pushing the start button in the vehicle will generate a LF field, which the key will respond to with a RF transmission to unlock or start the vehicle. Power Supply The transmitter is power by a single 3V CR2032 lithium battery. Buttons There are up to five buttons on the key, which are used for RKE lock, unlock, trunk, panic, and remote start. Variants There are six variants of the 215/245/295 keys. These variants are described under the device ID section. All variants are electronically identical. The differences are in the packaging. There is a four button housing, and a five button housing as well as two types of emblems. There are also two types of labels (laser etch) which help the customer differentiate between key #1 and key #2.

University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031354
Page
1
of
19


The
University
of
Michigan
Radiation
Laboratory
3228
EECS
Building
Ann
Arbor,
MI
48109(2122
Tel:
(734)
764(0500


Measured
Radio
Frequency
Emissions
From

SiemensTransmitter Model(s):15294306,15294307,15294310, 15294311,15803427,15803428, 15780256,and15780253 
Report
No.
415031(354
April
23,
2007

Copyright
©
2007

For:
Siemens
VDO
Automotive
4685
Investment
Drive
Troy,
MI
48098

Contact:
Charles
Muma
Tel:
(248)
763(6783
Fax:
(248)
764(7183
PO:
Verbal





Tests
supervised
by:
Measurements
made
by:
Valdis
V.
Liepa
Report
approved
by:

_____________________



Valdis
V.
Liepa
Test
Report
Prepared
by:
Joseph
D.
Brunett

Research
Scientist

Summary

Tests
for
compliance
with
FCC
Regulations
Part
15,
Subpart
C,
and
Industry
Canada
RSS(210/GEN,
were
performed
on
Siemens
model(s)
15294306,
15294307,
15294310,
15294311,
15803427,
15803428,
15780256,
15780253.

This
device
is
subject
to
the
Rules
and
Regulations
as
a
Transmitter.


In
testing
completed
on
January
29,
2007,
the
device
tested
in
the
worst
case
met
the
allowed
FCC
specifications
for
radiated
emissions
by
1.1
dB
(see
p.
6).
Besides
harmonics,
there
were
no
other
significant
spurious
emissions
found.
The
conducted
emission
tests
do
not
apply,
since
the
device
is
powered
by
a
3
VDC
battery.
University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031354
Page
2
of
19
1.Introduction
 Siemens
models
15294306,
15294307,
15294310,
15294311,
15803427,
15803428,
15780256,
15780253
were
tested
for
compliance
with
FCC
Regulations,
Part
15,
adopted
under
Docket
87(389,
April
18,
1989
as
subsequently
amended,
and
with
Industry
Canada
RSS(210/Gen,
Issue
6,
September
2005.

The
tests
were
performed
at
the
University
of
Michigan
Radiation
Laboratory
Willow
Run
Test
Range
following
the
procedures
described
in
ANSI
C63.4(2003
"Methods
of
Measurement
of
Radio(Noise
Emissions
from
Low(Voltage
Electrical
and
Electronic
Equipment
in
the
Range
of
9
kHz
to
40
GHz".

The
Site
description
and
attenuation
characteristics
of
the
Open
Area
Tes
Site
are
on
file
with
FCC
Laboratory,
Columbia,
Maryland
(FCC
Reg.
No:
91050)
and
with
Industry
Canada,
Ottawa,
ON
(File
Ref.
No:
IC
2057).
 2.TestProcedureandEquipmentUsed
The
pertinent
test
equipment
commonly
used
in
our
facility
for
measurements
is
listed
in
Table
2.1
below.

The
middle
column
identifies
the
specific
equipment
used
in
these
tests.

Table2.1TestEquipment. TestInstrumentEqpt.UsedManufacturer/Model Spectrum
Analyzer
(0.1(1500
MHz)


Hewlett(Packard,
182T/8558B
Spectrum
Analyzer
(9kHz(22GHz)

X
Hewlett(Packard
8593A
SN:
3107A01358
Spectrum
Analyzer
(9kHz(26GHz)

X
Hewlett(Packard
8593E,
SN:
3412A01131
Spectrum
Analyzer
(9kHz(26GHz)

Hewlett(Packard
8563E,
SN:
3310A01174
Spectrum
Analyzer
(9kHz(40GHz)

Hewlett(Packard
8564E,
SN:
3745A01031
Power
Meter

Hewlett(Packard,
432A
Power
Meter

Anritsu,
ML4803A/MP
Harmonic
Mixer
(26(40
GHz)

Hewlett(Packard
11970A,
SN:
3003A08327
Harmonic
Mixer
(40(60
GHz)

Hewlett(Packard
11970U,
SN:
2332A00500
Harmonic
Mixer
(75(110
GHz)

Hewlett(Packard
11970W,
SN:
2521A00179
Harmonic
Mixer
(140(220
GHz)

Pacific
Millimeter
Prod.,
GMA,
SN:
26
S(Band
Std.
Gain
Horn


S/A,
Model
SGH(2.6
C(Band
Std.
Gain
Horn


University
of
Michigan,
NRL
design
XN(Band
Std.
Gain
Horn


University
of
Michigan,
NRL
design
X(Band
Std.
Gain
Horn


S/A,
Model
12(8.2
X(band
horn
(8.2(
12.4
GHz)

Narda
640
X(band
horn
(8.2(
12.4
GHz)

Scientific

Atlanta
,
12(8.2,
SN:
730
K(band
horn
(18(26.5
GHz)

FXR,
Inc.,
K638KF
Ka(band
horn
(26.5(40
GHz)

FXR,
Inc.,
U638A
U(band
horn
(40(60
GHz)

Custom
Microwave,
HO19
W(band
horn(75(110
GHz)

Custom
Microwave,
HO10
G(band
horn
(140(220
GHz)

Custom
Microwave,
HO5R
Bicone
Antenna
(30(250
MHz)
X
University
of
Michigan,
RLBC(1

Bicone
Antenna
(200(1000
MHz)
X
University
of
Michigan,
RLBC(2
Dipole
Antenna
Set
(30(1000
MHz)

X
University
of
Michigan,
RLDP(1,(2,(3
Dipole
Antenna
Set
(30(1000
MHz)


EMCO
2131C,
SN:
992
Active
Rod
Antenna
(30
Hz(50
MHz)

EMCO
3301B,
SN:
3223
Active
Loop
Antenna
(30
Hz(50
MHz)

EMCO
6502,
SN:2855
Ridge(horn
Antenna
(300(5000
MHz)
X
University
of
Michigan

Amplifier
(5(1000
MHz)
X
Avantak,
A11(1,
A25(1S
Amplifier
(5(4500
MHz)
X
Avantak
Amplifier
(4.5(13
GHz)

Avantek,
AFT(12665
Amplifier
(6(16
GHz)

Trek
Amplifier
(16(26
GHz)

Avantek
LISN
Box

University
of
Michigan
Signal
Generator

Hewlett(Packard
8657B
University of Michigan Radiation Laboratory FCC Part 15, IC RSS210/Gen  Test Report %o. 415031354 Page 3 of 19 3.DeviceUnderTest 3.1Identification The DUT is a 315 MHz transmitter, 1.5 x 0.25 x 1 inches in size. The DUT transmits ASK and FSK data and its carrier is PLL generated, sourced from a 9.844 MHz reference crystal. The antenna is a trace on the PCB. The DUT was designed and manufactured by Siemens VDO Automotive, 4685 Investment Drive, Troy, MI 48098. It is identified as: Siemens Transmitter Model(s): 15294306, 15294307, 15294310, 15294311, 15803427, 15803428, 15780256, 15780253 FCC ID: M3N5WY7777A IC: 267F-5WY7777A 3.2ModesofOperation The device is capable of transmitting 3 different modulations at two different peak power levels. The highest peak power (HP) setting utilizes a greater duty cycle. The normal peak power (NP) setting contains a transmission with greater on time. Remote Start (RS) and Remote Keyless Entry (RKE) modes are software programmed to transmit either a 2.84 kb/s ASK or 9.6 kb/s ASK when actuated by button press (depending on DUT model). Some models of the device can be remotely actuated via encoded LF (125 kHz) interrogation, transmitting 9.6 kb/s ASK modulation or a 9.6 kb/s FSK modulation. Note: The DUT is manually activated (both for button press and LF, as the user must lift the door…

Text truncated - open the document above for the full version.