
Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.
IEEE 802.11b/g WLAN USB 2.0 Dongle Date of Issue: Nov. 15th,2005 Technical Support The firmware version of the IEEE 802.11g Wireless LAN USB Adapter is displayed on the utility About window. Users could download the most recent software version from the supplier’s web site or refer to the selling contact for the latest software information. If you have difficulty solving the problem while installing or using the IEEE 802.11g Wireless LAN USB Adapter, please contact the supplier for support. About This Manual IEEE 802.11g Wireless LAN USB Adapter User Manual is first published on July 2004. The manual includes procedures for the setup of the IEEE 802.11g Wireless LAN USB Adapter under Windows XP, Windows 2000, Windows 98SE or Windows ME. Take a moment to read through this manual and familiarize yourself with wireless technology. FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. For product available in the USA market, only channel 1~11 can be operated. Selection of other channels is not possible. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The IEEE 802.11g Wireless LAN USB Adapter has been tested to the FCC exposure requirements (Specific Absorbtion Rate). IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C. Table of Contents FCC Information............................................................................................................2 Chapter1 About 802.11g Wireless LAN USB Adapter...............................................................1 1-1 Features and Benefits ................................................................................... 1 1-2 Applications.................................................................................................. 2 1-3 Product Kit ................................................................................................... 3 1-4 About IEEE 802.11g Wireless LAN USB Adapter LED Indicators ............. 3 Chapter 2 Getting Started.............................................................................................................4 2-1 Before Installation ........................................................................................ 4 2-2 Insert the IEEE 802.11g Wireless LAN USB Adapter ................................. 4 Chapter 3 Install Driver for Windows .........................................................................................5 3-1 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows XP.... 5 3-2 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 2000 ...... 11 3-3 Set up IEEE 802.11g Wireless LAN USB Adapter for Windows 98SE/ ME15 Chapter 4 Configure the IEEE 802.11g Wireless LAN USB Adapter ....................................19 4-1 Install the WLAN Utility ............................................................................. 19 4-2 Use the WLAN Utility ................................................................................. 24 Specification.......................................................................................................................42 Limited Warranty........................................................................................................44 -1- Chapter1 About 802.11g Wireless LAN USB Adapter The IEEE 802.11g Wireless LAN USB Adapter is a standard USB adapter that fits into any standard USB 2.0 and 1.1 slots in a notebook computer. Its 54Mbps data rate gives equivalent Ethernet speed to access corporate network or the Internet in a wireless environment. When installed, IEEE 802.11g Wireless LAN USB Adapter is able to communicate with any 802.11/b and 802.11g compliant products. 1-1 Features and Benefits 1. Fully IEEE 802.11g compatible. 2. Direct Sequence Spread Spectrum (DSSS) technology provides robust, interference-resistant and secure wireless connection. 3. Supports 1, 2, 5.5 and 11 Mbps and up to 54Mbps data rate. 4. Working range up to 800 ft. in an open environment. 5. Seamless connectivity to wired Ethernet and PC network LAN’s augments existing networks quickly and easily. 6. Greater flexibility to locate or move networked PCs. …
Text truncated - open the document above for the full version.
Z-Com, Inc. 7F-2, No. 9. Prosperity RD.I Science-Based Industrial, Park Hsinchu, 300 Taiwan Tel: 886-3-577 7364 Fax: 03-577 3359 Date: 2007/5/3 Subject: Ad Hoc Mode Function Declaration FCC ID: M4Y-XG762NV2 To Whom it may concern, This device is acting as slave and operating on 2.4GHz band. Ad Hoc function is available and not able to work on non-US frequencies. Please contact the one signed below or the authorized agent for this filing. Thank you. Regards, ______________________ Ann Su EMC Engineer Tel: 886-3-577 7364 # 167 Fax: 03-577 3359 Ann Su 2 007.05.03 11:50:16 +08'00'
Page No. : 6 Confidential Letter Date: 2007/4/13 Federal Communications Commission Authorization and Evaluation Division FCC IDΚM4Y-XG762NV2 Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the Applicant Hereby requests confidential treatment of information accomparting this Application As outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely, Applicant’s company name : Z-Com, Inc. Applicant’s company address : 7F-2, No. 9. Prosperity RD.I Science-Based Industrial, Park Hsinchu, 300 Taiwan Signature : _________________________________ Job Title and Dept. : Ann Su / EMC Engineer Ann Su 2007.04.16 10:01:49 +08'00'
SPORTON International Inc. PAGE NUMBER : A1 OF A5 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT SPORTON International Inc. PAGE NUMBER : A2 OF A5 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A3 OF A5 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A4 OF A5 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A5 OF A5 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255
SPORTON International Inc. PAGE NUMBER : A1 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 APPENDIX A. Photographs of EUT SPORTON International Inc. PAGE NUMBER : A2 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255 SPORTON International Inc. PAGE NUMBER : A3 OF A3 TEL : 886-2-2696-2468 ISSUED DATE : May 02, 2007 FAX : 886-2-2696-2255
©2007 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev. 04 FCC SAR Test Report Test Report No FA741306-1-2-01 Specific Absorption Rate (SAR) Test Report for Z-Com, Inc. on the Wireless USB Adapter Report No. : FA741306-1-2-01 Trade Name : ZCOM Model Name : XG-762N FCC ID : M4Y-XG762NV2 Date of Testing : May 07, and 10, 2007 Date of Report : May 17, 2007 Date of Review : May 17, 2007 ‚ The test results refer exclusively to the presented test model / sample only. ‚ Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. ‚ Report Version: Rev. 04 SPORTON International Inc. 6F, No.106, Sec. 1, Hsin Tai Wu Rd., Hsi Chih, Taipei Hsien, Taiwan, R.O.C. ©2007 SPORTON International Inc. SAR Testing Lab This report shall not be reproduced except in full, without the written approval of Sporton. Rev. 04 Tel: 886-2-2696-2468 Fax: 886-2-2696-2255 FCC SAR Test Report Test Report No FA741306-1-2-01 Table of Contents 1. Statement of Compliance ............................................................................................................................................................ 1 2. Administration Data..................................................................................................................................................................... 2 2.1 Testing Laboratory ........................................................................................................................................................... 2 2.2 Detail of Applicant............................................................................................................................................................ 2 2.3 Detail of Manufacturer ..................................................................................................................................................... 2 2.4 Application Detail............................................................................................................................................................. 2 3. Scope ............................................................................................................................................................................................ 3 3.1 Description of Device Under Test (DUT).......................................................................................................................... 3 3.2 Product Photo.................................................................................................................................................................. 4 3.3 Applied Standards: .......................................................................................................................................................... 5 3.4 Device Category and SAR Limits .................................................................................................................................... 6 3.5 Test Conditions ................................................................................................................................................................ 6 3.5.1 Ambient Condition:............................................................................................................................................ 6 3.5.2 Test Configuration: ............................................................................................................................................ 6 4. Specific Absorption Rate (SAR) ................................................................................................................................................. 7 4.1 Introduction...................................................................................................................................................................... 7 4.2 SAR Definition ................................................................................................................................................................. 7 5. SAR Measurement Setup ............................................................................................................................................................ 8 5.1 DASY4 E-Field Probe System ..................................................................................................... .................................... 9 5.1.1 ET3DV6 E-Field Probe Specification............................................................................................................... 10 5.1.2 ET3DV6 E-Field Probe Calibration.................................................................................................................. 10 5.2 DATA Acquisition Electronics (DAE) ...............................................................................................................................11 5.3 Robot............................................................................................................................................................................. 12 5.4 Measurement Server ..................................................................................................................................................... 12 5.5 SAM Twin Phantom ....................................................................................................................................................... 12 5.6 Data Storage and Evaluation ......................................................................................................................................... 14 5.6.1 Data Storage ................................................................................................................................................... 14 5.6.2 Data Evaluation ....................................................................................................................................…
Text truncated - open the document above for the full version.
SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company Z-Com, Inc. Applicant Address 7F-2, No. 9. Prosperity RD.I Science-Based Industrial Park, Hsinchu, 300 Taiwan FCC ID M4Y-XG762NV2 Manufacturer’s company Z-Com, Inc. Manufacturer Address 7F-2, No. 9. Prosperity RD.I Science-Based Industrial Park, Hsinchu, 300 Taiwan Product Name Wireless USB Adapter Brand Name ZCOM Model Name XG-762N Test Rule 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 2400 ~ 2483.5MHz Received Date Apr. 13, 2007 Final Test Date May 02, 2007 Submission Type Original Equipment Statement Test result included is only for the 802.11b/g part of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.4-2003 and 47 CFR FCC Part 15 Subpart C. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR741306 Report Format Version: 01 Page No. : i of ii FCC ID: M4Y-XG762NV2 Issued Date : May 02, 2007 Table of Contents 1. CERTIFICATE OF COMPLIANCE ......................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT .......................................................................................................................... 2 3. GENERAL INFORMATION .................................................................................................................................. 3 3.1. Product Details....................................................................................................................................................................................3 3.2. Accessories .........................................................................................................................................................................................3 3.3. Table for Filed Antenna.......................................................................................................................................................................3 3.4. Table for Carrier Frequencies .............................................................................................................................................................3 3.5. Table for Test Modes ...........................................................................................................................................................................4 3.6. Table for Testing Locations..................................................................................................................................................................4 3.7. Table for Supporting Units ...................................................................................................................................................................4 3.8. Table for Parameters of Test Software Setting .....................................................................................................................................5 3.9. Test Configurations .............................................................................................................................................................................6 4. TEST RESULT ..................................................................................................................................................... 8 4.1. AC Power Line Conducted Emissions Measurement...........................................................................................................................8 4.2. Maximum Peak Output Power Measurement ...................................................................................................................................12 4.3. Power Spectral Density Measurement ..............................................................................................................................................14 4.4. 6dB Spectrum Bandwidth Measurement ..........................................................................................................................................19 4.5. Radiated Emissions Measurement ....................................................................................................................................................24 4.6. Band Edge Emissions Measurement .................................................................................................................................................42 4.7. Antenna Requirements .....................................................................................................................................................................49 5. LIST OF MEASURING EQUIPMENTS ................................................................................................................... 50 6. TEST LOCATION.............................................................................................................................................. 52 7. TAF CERTIFICATE OF ACCREDITATION ............................................................................................................. 53 APPENDIX A. PHOTOGRAPHS OF EUT.......................................................................................................... A1 ~ A8 APPENDIX B. TEST PHOTOS.......................................................................................................................... B1 ~ B6 Report No.: FR741306 Report Format Version: 01 Page No. : ii of ii FCC ID: M4Y-XG762NV2 Issued Date : May 02, 2007 …
Text truncated - open the document above for the full version.
Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 1 of 6 Appendix B. Test Photos Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 2 of 6 1. Photographs of Conducted Emissions Test Configuration FRONT VIEW REAR VIEW Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 3 of 6 2. Photographs of Radiated Emissions Test Configuration 9kHz ~30MHz FRONT VIEW REAR VIEW Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 4 of 6 30MHz~1GHz FRONT VIEW REAR VIEW Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 5 of 6 Above 1GHz FRONT VIEW REAR VIEW Report No.: FR741306 FCC ID: M4Y-XG762NV2 Page No. : 6 of 6 SIDE VIEW
No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park · Tao Yuan · Taiwan
| # | Rule Parts | Frequency Range | Power Output |
|---|---|---|---|
| 1 | 15C | 2.41 GHz - 2.46 GHz | 172.20 mW |

802.11ax Access Point
Equipment Class
DTS - Digital Transmission System
802.11ac Wireless LAN USB Module
Equipment Class
NII - Unlicensed National Information Infrastructure TX
802.11 ac Wave 2 Access Point
Equipment Class
NII - Unlicensed National Information Infrastructure TX
802.11ac Access Point
Equipment Class
NII - Unlicensed National Information Infrastructure TX
5GHz 11ac Wireless Bridge
Equipment Class
NII - Unlicensed National Information Infrastructure TX