M5LROX111ROX 11.1 EVO

IMPORTANT PRODUCT INFORMATION ROX 2.0 FCC ID: M5LROX20 IC ID: 7580A-ROX20 ROX 4.0 FCC ID: M5LROX40 IC ID: 7580A-ROX40 ROX 11.1 FCC ID: M5LROX111 IC ID: 7580A-ROX111 SIGMA-ELEKTRO GmbH Dr.-Julius-Leber-Straße 15 D-67433 Neustadt/Weinstraße Service-Tel. +49-(0)6321-9120-118 E-Mail: [email protected] CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test record, data evaluation and Equipment Under Test (EUT) configurations represented herein are true and accurate under the standards herein specified. CE statement (Übersetzung in alle Sprachen notwendig) We, SIGMA-ELEKTRO GmbH, declare that the equipment has been tested in our facility and found compliance with the requirement limits of applicable stan- dards, in accordance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and additional according to Directive (EU) 2015/883 to ament Annex II of the above mention directive with 4 additional substances. The test…

Text truncated - open the document above for the full version.

VIDEOS & COMPLETE MANUAL AT SIGMA- ELEKTRO GmbH Dr. - Julius - Leber - Straße 15D-67433 Neustadt/WeinstraßeTel. + 49 (0) 63 21-9120-0 Fax. + 49 (0) 63 21-9120-34 E-mail: [email protected] 000000/1 www.sigmasport.com SHORT MANUAL EN Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: DE Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: FR Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: IT Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: ES Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: NL Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: PL Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: CZ Bei dieser Anleitung handelt es sich um eine Kurzanleitung. Die ausführliche Anleitung erreichen Sie, indem Sie diesem Link Folgen: sigmasport.com/rox11evo REMARKSCONTENTS ROX 11.1 EVO HR SET SENSOR SET Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx Art.-Nr. xxxxx CLICK! HEART RATE SENSOR HEART RATE SENSOR BATTERY CHANGE Available in set or sold separately! or or INSTALLATION o p e n - c l o s e o p e n - c l o s e o p e n - c l o s e 1 2 3 4 10 C ENT Ø 25,4 mm 0,6 Nm Ø 31,8 mm ! TIP : Watch the video tutorial for more information, follow this link: SPEED SENSOR SPEED / CADENCE SENSOR FIRST START CADENCE SENSOR INSTALLATION 13 4 5 2 DE Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. EN Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. DE 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. IT Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. IT 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. NL Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. NL 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. CZ Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. CZ 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. FR Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. FR 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. ES Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. ES 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. PL Der SPEED-Sensor kann an der Fahrradnabe beider Laufräder montiert werden. PL 2. Remove sticker. 5. Blue light flashes. TIP: Watch the video tutorial for more information. Remove sticker. EN ! QR Code zum Video ! Blue light flashes. CAD – Gerät einschalten/ausschalten (3s drücken)– Menü öffnen oder schließen – Eine Seite Zurück– In Listen rauf– Wert verringern – Training starten/fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training– Training stoppen– Training nach beenden speichern– Eine Menüebene rauf– Eine Seite Weiter– In Listen runter– Wert erhöhen MENU Button START/ENTER Button STOP/BACK Button ButtonButton MENÜ - Taste START/ENTER - Taste STOP/BACK - Taste Taste Taste – Gerät einschalten/ ausschalten (3s drücken)– Menü öffnen oder schließen – Training starten / fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training – Training stoppen– Training nach beenden speichern– Eine Menüebene rauf – Eine Seite Weiter– In Listen runter– Wert erhöhen – Eine Seite Zurück– In Listen rauf– Wert verringern MENU - Taste START/ENTER - Taste STOP/BACK - Taste Taste Taste – Gerät einschalten/ ausschalten (3s drücken)– Menü öffnen oder schließen – Training starten / fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training – Training stoppen– Training nach beenden speichern– Eine Menüebene rauf – Eine Seite Weiter– In Listen runter– Wert erhöhen – Eine Seite Zurück– In Listen rauf– Wert verringern MENU - Taste START/ENTER - Taste STOP/BACK - Taste Taste Taste – Gerät einschalten/ ausschalten (3s drücken)– Menü öffnen oder schließen – Training starten / fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training – Training stoppen– Training nach beenden speichern– Eine Menüebene rauf – Eine Seite Weiter– In Listen runter– Wert erhöhen – Eine Seite Zurück– In Listen rauf– Wert verringern BUTTON FUNCTIONS ENDE FR IT MENU - Taste START/ENTER - Taste STOP/BACK - Taste Taste Taste – Gerät einschalten/ ausschalten (3s drücken)– Menü öffnen oder schließen – Training starten / fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training – Training stoppen– Training nach beenden speichern– Eine Menüebene rauf – Eine Seite Weiter– In Listen runter– Wert erhöhen – Eine Seite Zurück– In Listen rauf– Wert verringern MENU - Taste START/ENTER - Taste STOP/BACK - Taste Taste Taste – Gerät einschalten/ ausschalten (3s drücken)– Menü öffnen oder schließen – Training starten / fortsetzen– Eingabe bestätigen– Eine Menüebene runter– Manuelle Runde nehmen im Training – Training stoppen– Training nach beenden speichern– Eine Menüebene rauf – Eine Seite Weiter– In Listen runter– Wert erhöhen – Eine Seite Zurück– In Listen rauf– Wert verringern MEN…

Text truncated - open the document above for the full version.

EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group EXTERNAL PHOTOGRAPHS OF EUT Front View of EUT Back View of EUT EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Side View of EUT -1 Side View of EUT -2 EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Side View of EUT -3 Side View of EUT -4

E‐Label information: Model: ROX 11.1 EVO 1. Images of the e‐label screen are provided below: 2. The information that will be displayed on the e‐label and information that will remain in the user manual is shown below: Information On E‐labelIn Manual (Regulatory Notifications Guide) FCC ID/IC number Yes No DoC logo Yes No Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device No Yes Class A / B Digital Device user manual statements No Yes 3. Users are able to access the information in no more than three steps in a device’s menu. Step1 main menu Step2 info 4. The information is stored on the device, no special accessories or supplemental plug‐ins (e.g., a SIM/USIM card) are required to access the information. No. 5. Users are provided specific instructions on how to access the information. Yes. 6. The above information must be programmed by the responsible party and the information must be secured in such a manner that third‐parties cannot modify it. The user cannot modify the e‐label formation.

EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group INTERNAL PHOTOGRAPHS OF EUT Open View of EUT-1 Open View of EUT-2 EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Internal View of EUT-1 Internal View of EUT-2 EUT Photo No.: E2/2020/A0018~19-P Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This docu- ment cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offend- ers may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.sgs.com.tw Member of SGS Group Battery Antenna

Report No: E2/2020/A0020 Page: 1 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group RF EXPOSURE REPORT OF FCC Applicant: ZEITBIKE LLC 298 Dalton Street, Ventura, California, United States, 93003 1539 IC Applicant: SIGMA ELEKTRO GmbH Dr. Julius-Leber-Str.15, 67433 Neustadt, Germany Product Name: ROX 11.1 EVO Brand Name: SIGMA Model No.: ROX 11.1 EVO Model Difference: N/A Report Number: E2/2020/A0020 FCC ID M5LROX111 IC: 7580A-ROX111 FCC Rule Part Part 2.1093 ISED Rule: RSS-102 issue 5 Mar. 19, 2015 Issue Date: February 19, 2021 Date of Test: This report is only calculated based on the test results, there will be no date of test. Date of EUT Received: November 10, 2020 We hereby certify that: The data evaluation in this report is in compliance with FCC Rules Part 2 & RSS-102. The results of this report relate only to the sample identified in this report. Approved By: John Yeh / Asst. Manager Report No: E2/2020/A0020 Page: 2 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Revision History Report Number Revision Description Issue Date Remark E2/2020/A0020 Rev.00 Original. February 19, 2021 Revised By: Karen Huang Note: 1. Disclaimer Antenna information is provided by the applicant, the test results of this report are applicable to the sample EUT received. Report No: E2/2020/A0020 Page: 3 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Table of Contents 1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ........................................................ 4 1.1 General Information ................................................................................................................. 4 1.2 Antenna Informati…

Text truncated - open the document above for the full version.

Report No.: E2/2020/A0018 Page: 1 of 66 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com.tw/Terms-and-Conditions and for electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com.tw/Terms-and-Conditions. Attention is drawn to the limitation of liability, indem- nification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of…

Text truncated - open the document above for the full version.