M82-AIM78S610.1 inch Tablet PC

Mobile Computer AIM-78H Series Startup Manual AIM-78H Appearance Left: Front View Right: Rear View For more information on this and other Advantech products, please visit our website at: http://www.advantech.com For technical support and service, please visit our support website at: http://support.advantech.com This manual is for AIM-78H Series First Edition October 2021 Description of Parts A: Front Camera B: Power LED C: Light Sensor D: Speaker E: micro-SIM & micro-SD Card Door F: Programmable Key (Default Barcode scanner) G: Docking Connector (USB3.0 ) H: USB 2.0 Type A I: USB 3.0 Type C J: Power Button K: Volume Key (Up/Down) L: Audio Jack (Headset Combo) M: Extension Module N: NFC O: Rear Camera with LED Flash P: Battery Cover Q: DC-IN Easy Setup Power On Computer 1. Model: AIM-78H Rating 19 Vdc / 3.43A 2. This product is intended to be supplied by a UL Listed Power Adapter (FSP / FSP065-DBCM1) or DC power source, rated 19 Vdc, 3.43A min. for model AIM-78H, and Tma 40 degree C. Please contact Advantech for further information and assistance. 3. The product is equipped with shipping mode for battery protected and power saving, please charge the embedded battery of the computer: Connect the Power adaptor on the AIM-78H computer. (“Q” on the description of parts.) Please charge for at least one hour when you use this computer for the first time. 4. Push the Power button (“J” on description of parts.) for 2~3 seconds to start the computer. 5. The product is equipped with a 10.1” Capacitive Touch Panel. Use finger to touch the following Active Area to operate the computer. 6. The product is equipped with one LED indicator for battery status. The following shows LED status for different power states: a) The orange LED blinks when internal battery capacity is below 10% to warn the user to charge. b) The Blue LED lights up when internal battery is being charged. c) The Green LED lights up when internal battery is full. 7. While the computer is running, push the power button for 1 second will disable LCD backlight for power saving. Push the power button again will enable the backlight again; press the power button for 10 seconds while computer is running, the system will shut down. 8. Environment:  Operating Temperature : 0°C ~ +40 °C  Operating Humidity : 10% ~ 90%@40°C non- condensed  Storage/Transportation Temperature : -20°C ~ +60°C  Storage/Transportation Humidity : 10% ~ 95%@40°C non-condensed  Humidity consider to 25°C, 48 hrs  Atmospheric pressure： 540-1013 hPa (for operating); 540-1060 hPa (for Storage/Transportation)  IP level : IP65 9. There will be “ADVANTECH” logo upside down while first boot up. This scenario will be disappear after 2 nd boot up and won’t influence functions and usage. Intended Use The AIM-78H is intended for integration with hospital system. It is designed for general purpose for hospital environment. For data collection and display for reference. It should not be used for life-supporting system. Intended User Group The Primary Users of the AIM-78H are professional healthcare personnel and general patient group, It is appropriate for users age is 18 to 65, users weight and health are not relevant. Maintenance If encounter any of system failure or serious incident in relation to device, please report to the manufacturer or local agent. Battery Caution CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer, discard used batteries according to the manufacturer's instructions. Attention : Danger d'explosion si la batterie est inexactement remplacée. Remplacez seulement avec la même chose ou le type recommandé par le fabricant, jettent les batteries utilisées instructions de s selon fabricant des'. Mistreat the battery used in this device may present a risk of fire or chemical burn. Do not attempt to disassemble the computer or its accessories. Only qualified personal is allowed to replace the battery. Do not dispose batteries in a fire and check with local authorities for disposal instructions. AIM-78H can only be equipped with standard battery pack with Getac, AIM-BAT-10, 2300mAH Lithium Ion Battery. Use of another battery may present a risk of fire or explosion. Battery Charge Notice It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is more efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. Storage and Safety Notice Although charge Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to the buildup of internal resistance. If this happens they will require recharging prior to use. Lithium Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store AIM-78H within normal room temperature ranges. Warnings, Cautions and Notes A WARNING statement provides important information about a potentially hazardous situation which, if not avoided, could result in death or serious injury. Une déclaration d'AVERTISSEMENT fournit des informations importantes sur une situation potentiellement dangereuse qui, si elle n'est pas évitée, pourrait entraîner la mort ou des blessures graves. A CAUTION statement provides important information about a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or in damage to the equipment or other property. Une déclaration de MISE EN GARDE fournit des informations importantes sur une situation potentiellement dangereuse qui, si elle n'est pas évitée, peut entraîner des blessures mineures ou modérées pour l'utilisateur ou le patient ou endommager l'équipement ou d'autres biens. A NOTE…

Text truncated - open the document above for the full version.

Mobile Computer AIM-78S Series Startup Manual AIM-78S Appearance Left: Front View Right: Rear View For more information on this and other Advantech products, please visit our website at: http://www.advantech.com For technical support and service, please visit our support website at: http://support.advantech.com This manual is for AIM-78S Series First Edition July 2021 Description of Parts A: Front Camera B: Power LED C: Light Sensor D: Speaker E: micro-SIM & micro-SD Card Door F: Programmable Key (Default Barcode scanner) G: Docking Connector (USB3.0 ) H: USB 2.0 Type A I: USB 3.0 Type C J: Power Button K: Volume Key (Up/Down) L: Audio Jack (Headset Combo) M: Extension Module N: NFC O: Rear Camera with LED Flash P: Battery Cover Q: DC-IN Easy Setup Power On Computer 1. Model: AIM-78S Rating 19 Vdc / 3.43A 2. This product is intended to be supplied by a UL Listed Power Adapter (Tamura / XAIM-XEW1934N- 5158) or DC power source, rated 19 Vdc, 3.43A min. for model AIM-78S, and Tma 40 degree C. Please contact Advantech for further information and assistance. 3. The product is equipped with shipping mode for battery protected and power saving, please charge the embedded battery of the computer: Connect the Power adaptor on the AIM-78S computer. (“Q” on the description of parts.) Please charge for at least one hour when you use this computer for the first time. 4. Push the Power button (“J” on description of parts.) for 2~3 seconds to start the computer. 5. The product is equipped with a 10.1” Capacitive Touch Panel. Use finger to touch the following Active Area to operate the computer. 6. The product is equipped with one LED indicator for battery status. The following shows LED status for different power states: a) The orange LED blinks when internal battery capacity is below 10% to warn the user to charge. b) The Blue LED lights up when internal battery is being charged. c) The Green LED lights up when internal battery is full. 7. While the computer is running, push the power button for 1 second will disable LCD backlight for power saving. Push the power button again will enable the backlight again; press the power button for 10 seconds while computer is running, the system will shut down. 8. Environment:  Operating Temperature : -10°C ~ +50 °C  Operating Humidity : 10% ~ 90%@40°C non- condensed  Storage/Transportation Temperature : -20°C ~ +60°C  Storage/Transportation Humidity : 10% ~ 95%@40°C non-condensed  Humidity consider to 25°C, 48 hrs  Number and type of Means of Protection : MOPP Altitude 3000m  Atmospheric pressure： 700-1013 hPa (for operating); 500-1060 hPa (for Storage/Transportation)  IP level : IPX0 9. There will be “ADVANTECH” logo upside down while first boot up. This scenario will be disappear after 2 nd boot up and won’t influence functions and usage. Maintenance If encounter any of system failure or serious incident in relation to device, please report to the manufacturer or local agent. Battery Caution CAUTION! Danger of explosion if battery is incorrectly replaced. Replace only with the same type recommended by the manufacturer, discard used batteries according to the manufacturer's instructions. Attention : Danger d'explosion si la batterie est inexactement remplacée. Remplacez seulement avec la même chose ou le type recommandé par le fabricant, jettent les batteries utilisées instructions de s selon fabricant des'. Mistreat the battery used in this device may present a risk of fire or chemical burn. Do not attempt to disassemble the computer or its accessories. Only qualified personal is allowed to replace the battery. Do not dispose batteries in a fire and check with local authorities for disposal instructions. AIM-78S can only be equipped with standard battery pack with Getac, AIM-BAT-10, 2300mAH Lithium Ion Battery. Use of another battery may present a risk of fire or explosion. Battery Charge Notice It is important to consider the environment temperature whenever you are charging the Lithium-Ion battery pack. The process is more efficient at normal room temperature or slightly cooler. It is essential that you charge batteries within the stated range of 0°C to 40°C. Charging batteries outside of the specified range could damage the batteries and shorten their charging life cycle. Storage and Safety Notice Although charge Lithium-Ion batteries may be left unused for several months, their capacity may be depleted due to the buildup of internal resistance. If this happens they will require recharging prior to use. Lithium Ion batteries may be stored at temperatures between -20°C to 60°C, however they may be depleted more rapidly at the high end of this range. It is recommended to store AIM-78S within normal room temperature ranges. Warnings, Cautions and Notes A WARNING statement provides important information about a potentially hazardous situation which, if not avoided, could result in death or serious injury. Une déclaration d'AVERTISSEMENT fournit des informations importantes sur une situation potentiellement dangereuse qui, si elle n'est pas évitée, pourrait entraîner la mort ou des blessures graves. A CAUTION statement provides important information about a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient or in damage to the equipment or other property. Une déclaration de MISE EN GARDE fournit des informations importantes sur une situation potentiellement dangereuse qui, si elle n'est pas évitée, peut entraîner des blessures mineures ou modérées pour l'utilisateur ou le patient ou endommager l'équipement ou d'autres biens. A NOTE provides additional information intended to avoid inconveniences. Details fo preparatory treatment or disposal Installation is only to be carried out by manufacturer authorized and trained personnel. Calibration the device - We suggest to send back to supplier for annually check. Safety Instructions 1. Strictly follow these instructions for use; please read these…

Text truncated - open the document above for the full version.

Reference No.: BEAD-WTW-P21060534-1 Page 1/28 Brand: ADVANTECH, Model: AIM-78S-6, AIM-78H-6 Reference No.: BEAD-WTW-P21060534-1 Page 2/28 Reference No.: BEAD-WTW-P21060534-1 Page 3/28 Reference No.: BEAD-WTW-P21060534-1 Page 4/28 Reference No.: BEAD-WTW-P21060534-1 Page 5/28 Adapter 1 (Brand: Tamura, Model: XEW1934N) Reference No.: BEAD-WTW-P21060534-1 Page 6/28 Reference No.: BEAD-WTW-P21060534-1 Page 7/28 Adapter 2 (Brand: FSP, Model: FSP065-DBCM1) (option) Reference No.: BEAD-WTW-P21060534-1 Page 8/28 Reference No.: BEAD-WTW-P21060534-1 Page 9/28 Docking Stations (Brand: ADVANTECH, Model: AIM-DOC-0001) (option) Reference No.: BEAD-WTW-P21060534-1 Page 10/28 Reference No.: BEAD-WTW-P21060534-1 Page 11/28 Reference No.: BEAD-WTW-P21060534-1 Page 12/28 Reference No.: BEAD-WTW-P21060534-1 Page 13/28 Docking Stations (Brand: ADVANTECH, Model: AIM-VED0) (option) Reference No.: BEAD-WTW-P21060534-1 Page 14/28 Reference No.: BEAD-WTW-P21060534-1 Page 15/28 Reference No.: BEAD-WTW-P21060534-1 Page 16/28 Reference No.: BEAD-WTW-P21060534-1 Page 17/28 Reference No.: BEAD-WTW-P21060534-1 Page 18/28 Docking Stations (Brand: ADVANTECH, Model: AIM-OFD-0000) (option) Reference No.: BEAD-WTW-P21060534-1 Page 19/28 Reference No.: BEAD-WTW-P21060534-1 Page 20/28 Reference No.: BEAD-WTW-P21060534-1 Page 21/28 Reference No.: BEAD-WTW-P21060534-1 Page 22/28 Reference No.: BEAD-WTW-P21060534-1 Page 23/28 Extension Modules- Barcode scanner (20∘) (Brand: ADVANTECH, Model: AIM-EXT0-0040 (20 degree)) (option) Reference No.: BEAD-WTW-P21060534-1 Page 24/28 Reference No.: BEAD-WTW-P21060534-1 Page 25/28 Reference No.: BEAD-WTW-P21060534-1 Page 26/28 Reference No.: BEAD-WTW-P21060534-1 Page 27/28 Reference No.: BEAD-WTW-P21060534-1 Page 28/28 Extension Modules- Barcode scanner (70∘) (Brand: ADVANTECH, Model: AIM-EXT0-0041 (70 degree)) (option)

Label Location Test Model: AIM-78S-6 Series Model: AIM-78H-6 FCC ID：M82-AIM78S6 IC：9404A-AIM78S6 The label will be permanently affixed at a conspicuous location on the device. Back of EUT Label Location

Reference No.: BEAD-WTW-P21060534-2 Page 1/52 Brand: ADVANTECH, Model: AIM-78S-6, AIM-78H-6 Reference No.: BEAD-WTW-P21060534-2 Page 2/52 WiFi_Main LTE_Aux. GPS LTE_Main WiFi_Aux. Reference No.: BEAD-WTW-P21060534-2 Page 3/52 Reference No.: BEAD-WTW-P21060534-2 Page 4/52 Reference No.: BEAD-WTW-P21060534-2 Page 5/52 Reference No.: BEAD-WTW-P21060534-2 Page 6/52 Reference No.: BEAD-WTW-P21060534-2 Page 7/52 Reference No.: BEAD-WTW-P21060534-2 Page 8/52 Reference No.: BEAD-WTW-P21060534-2 Page 9/52

Reference No.: BEAD-WTW-P21060534-2 Page 10/52 WWAN+WLAN module (Brand: USI, Model: MS-01 Pro) Reference No.: BEAD-WTW-P21060534-2 Page 11/52 Reference No.: BEAD-WTW-P21060534-2 Page 12/52 Reference No.: BEAD-WTW-P21060534-2 Page 13/52 Reference No.: BEAD-WTW-P21060534-2 Page 14/52 Reference No.: BEAD-WTW-P21060534-2 Page 15/52 Reference No.: BEAD-WTW-P21060534-2 Page 16/52 Reference No.: BEAD-WTW-P21060534-2 Page 17/52

Reference No.: BEAD-WTW-P21060534-2 Page 18/52 Reference No.: BEAD-WTW-P21060534-2 Page 19/52 Reference No.: BEAD-WTW-P21060534-2 Page 20/52 Reference No.: BEAD-WTW-P21060534-2 Page 21/52 Reference No.: BEAD-WTW-P21060534-2 Page 22/52 Reference No.: BEAD-WTW-P21060534-2 Page 23/52 Reference No.: BEAD-WTW-P21060534-2 Page 24/52 Battery (Brand: ADVANTECH, Model: AIM-BAT-10) Reference No.: BEAD-WTW-P21060534-2 Page 25/52 Docking Stations (Brand: ADVANTECH, Model: AIM-DOC-0001) (option) Reference No.: BEAD-WTW-P21060534-2 Page 26/52

Reference No.: BEAD-WTW-P21060534-2 Page 27/52 Reference No.: BEAD-WTW-P21060534-2 Page 28/52 Reference No.: BEAD-WTW-P21060534-2 Page 29/52 Reference No.: BEAD-WTW-P21060534-2 Page 30/52 Docking Stations (Brand: ADVANTECH, Model: AIM-VED0) (option) Reference No.: BEAD-WTW-P21060534-2 Page 31/52 Reference No.: BEAD-WTW-P21060534-2 Page 32/52 Reference No.: BEAD-WTW-P21060534-2 Page 33/52 Reference No.: BEAD-WTW-P21060534-2 Page 34/52

Reference No.: BEAD-WTW-P21060534-2 Page 35/52 Reference No.: BEAD-WTW-P21060534-2 Page 36/52 Reference No.: BEAD-WTW-P21060534-2 Page 37/52 Reference No.: BEAD-WTW-P21060534-2 Page 38/52 Reference No.: BEAD-WTW-P21060534-2 Page 39/52 Reference No.: BEAD-WTW-P21060534-2 Page 40/52 Docking Stations (Brand: ADVANTECH, Model: AIM-OFD-0000) (option) Reference No.: BEAD-WTW-P21060534-2 Page 41/52 Reference No.: BEAD-WTW-P21060534-2 Page 42/52

Reference No.: BEAD-WTW-P21060534-2 Page 43/52 Reference No.: BEAD-WTW-P21060534-2 Page 44/52 Reference No.: BEAD-WTW-P21060534-2 Page 45/52 Extension Modules- Barcode scanner (20∘) (Brand: ADVANTECH, Model: AIM-EXT0-0040 (20 degree)) (option) Reference No.: BEAD-WTW-P21060534-2 Page 46/52 Reference No.: BEAD-WTW-P21060534-2 Page 47/52 Reference No.: BEAD-WTW-P21060534-2 Page 48/52 Extension Modules- Barcode scanner (70∘) (Brand: ADVANTECH, Model: AIM-EXT0-0041 (70 degree)) (option) Reference No.: BEAD-WTW-P21060534-2 Page 49/52 Reference No.: BEAD-WTW-P21060534-2 Page 50/52

Reference No.: BEAD-WTW-P21060534-2 Page 51/52 Reference No.: BEAD-WTW-P21060534-2 Page 52/52

SAR Test Report Report Format Version 5.0.0 Page No. : 1 of 34 Report No. : SFBEAD-WTW-P21060534 Issued Date : Jan. 11, 2022 SAR Test Report Report No. : SFBEAD-WTW-P21060534 Applicant : ADVANTECH CO., LTD Address : No.1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Product : 10.1" Tablet PC FCC ID : M82-AIM78S6 Brand : ADVANTECH Model No. : AIM-78S-6 Series No. : AIM-78H-6, AIM-78H-6XXXXXXXXXXXXXXXX, AIM-78S-6XXXXXXXXXXXXXXXX (X: maybe 1-9, A-Z, or blank) (refer to section 2 for more details) Standards : FCC 47 CFR Part 2 (2.1093), IEEE C95.1:1992, IEEE Std 1528:2013 KDB 865664 D01 v01r04, KDB 865664 D02 v01r02, KDB 248227 D01 v02r02, KDB 447498 D01 v06, KDB 616217 D04 v01r02, KDB 941225 D01 v03r01, KDB 941225 D05 v02r05, KDB 941225 D05A v01r02 Sample Received Date : Jun. 16, 2021 Date of Testing : Aug. 17, 2021 ~ Sep. 11, 2021 Lab Address : No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location : No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City, Taiwan CERTIFICATION: The above equipment have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch–Lin Kou Laboratories, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s SAR characteristics under the conditions specified in this report. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product certification, approval, or endorsement by TAF or any government agencies. Prepared By : Vera Huang / Specialist Approved By : Gordon Lin / Manager FCC Accredited No.: TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. SAR Test Report Report Format Version 5.0.0 Page No. : 2 of 34 Report No. : SFBEAD-WTW-P21060534 Issued Date : Jan. 11, 2022 Table of Contents Release Control Record ............................................................................................................................................................... 3 1. Summary of Maximum SAR Value ....................................................................................................................................... 4 2. Description of Equipment Under Test ................................................................................................................................. 5 3. SAR Measurement System ................................................................................................................................................... 7 3.1 Definition of Specific Absorption Rate (SAR) ............................................................................................................... 7 3.2 SPEAG DASY6 System ............................................................................................................................................... 7 3.2.1 Robot ............................................................................................................................................................... 8 3.2.2 Probes ............................................................................................................................................................. 9 3.2.3 Data Acquisition Electronics (DAE) .................................................................................................................. 9 3.2.4 Phantoms ......................................................................................................................................................... 9 3.2.5 Device Holder ................................................................................................................................................ 10 3.2.6 System Validation Dipoles ............................................................................................................................. 11 3.2.7 Power Source ................................................................................................................................................ 11 3.2.8 Tissue Simulating Liquids .............................................................................................................................. 12 3.3 SAR System Verification ............................................................................................................................................ 14 3.4 SAR Measurement Procedure ................................................................................................................................... 15 3.4.1 Area Scan and Zoom Scan Procedure ............................................…

Text truncated - open the document above for the full version.

Annex A. SAR Plots of System Verification The plots for system verifi cation are shown as follows. Report No. : SFBEAD-WTW-P21060534 Date: 2021/09/11 Test Laboratory: Bur eau Veritas ADT SAR/HAC Testing Lab S01 System Check_H835_210911 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d 092 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H07T10N1_0911 Medium parameters used: f = 835 MHz; σ = 0.919 S/m; ε r = 42.448; ρ = 1000 kg/m 3 Ambient Temperature：23.8 °C ; Liquid Temperature：23.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN3971; ConvF(10.17, 10.17, 10.17) @ 835 MHz; Calibrated: 2021/01/27 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1431; Calibrated: 2021/03/24 - Phantom: ELI Phantom_1245; Type: QDOVA002AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.594 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 26.98 V/m; Power Drift = -0.11 dB Peak SAR (extrapolated) = 0.707 W/kg SAR(1 g) = 0.457 W/kg; SAR(10 g) = 0.301 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 0.619 W/kg Report No. : SFBEAD-WTW-P21060534 Test Laboratory: Bureau Veritas ADT SAR/HAC Testing Lab Date: 2021/09/11 S02 System Check_H1900_210911 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H16T20N1_0911 Medium parameters used: f = 1900 MHz; σ = 1.459 S/m; ε r = 38.622; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C ; Liquid Temperature：23.4 °C DASY5 Configuration: -Probe: EX3DV4 - SN3820; ConvF(7.35, 7.35, 7.35) @ 1900 MHz; Calibrated: 2021/07/28 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE4 Sn1305; Calibrated: 2021/04/09 - Phantom: ELI Phantom_2105; Type: QD OVA 004 Ax; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 3.23 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 48.77 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 3.87 W/kg SAR(1 g) = 2.01 W/kg; SAR(10 g) = 1.06 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 3.25 W/kg Report No. : SFBEAD-WTW-P21060534 Date: 2021/08/18 Test Laboratory: Bureau Verita s ADT SAR/HAC Testing Lab S03 System Check_H1900_210818 DUT: Dipole 1900 MHz; Type: D1900V2; SN: 5d036 Communication System: UID 0, CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium: H16T20N1_0818 Medium parameters used: f = 1900 MHz; σ = 1.456 S/m; ε r = 39.288; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C ; Liquid Temperature：23.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.43, 8.43, 8.43) @ 1900 MHz; Calibrated: 2021/06/03 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2021/06/02 - Phantom: ELI Phantom_1206; Type: QDOVA002AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 4.44 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 56.79 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 5.39 W/kg SAR(1 g) = 2.15 W/kg; SAR(10 g) = 1.04 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 4.47 W/kg Report No. : SFBEAD-WTW-P21060534 Date: 2021/08/18 Test Laboratory: Bureau Verita s ADT SAR/HAC Testing Lab S04 System Check_H1750_210818 DUT: Dipole 1750 MHz; Type: D1750V2; SN: 1111 Communication System: UID 0, CW; Frequency: 1750 MHz;Duty Cycle: 1:1 Medium: H16T20N1_0818 Medium parameters used: f = 1750 MHz; σ = 1.326 S/m; ε r = 39.842; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C ; Liquid Temperature：23.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(8.77, 8.77, 8.77) @ 1750 MHz; Calibrated: 2021/06/03 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2021/06/02 - Phantom: ELI Phantom_1206; Type: QDOVA002AA - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 2.57 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 42.35 V/m; Power Drift = 0.06 dB Peak SAR (extrapolated) = 3.20 W/kg SAR(1 g) = 1.74 W/kg; SAR(10 g) = 0.919 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 2.66 W/kg Report No. : SFBEAD-WTW-P21060534 Date: 2021/08/17 Test Laboratory: Bureau Verita s ADT SAR/HAC Testing Lab S05 System Check_H835_210817 DUT: Dipole 835 MHz; Type: D835V2; SN: 4d092 Communication System: UID 0, CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium: H07T10N1_0817 Medium parameters used: f = 835 MHz; σ = 0.945 S/m; ε r = 43.081; ρ = 1000 kg/m 3 Ambient Temperature：23.7 °C ; Liquid Temperature：23.4 °C DASY5 Configuration: - Probe: EX3DV4 - SN7472; ConvF(10.05, 10.05, 10.05) @ 835 MHz; Calibrated: 2021/06/03 - Sensor-Surface: 1.4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2021/06/02 - Phantom: ELI Phantom_1206; Type: QDOVA002AA; - Measurement SW: DASY52, Version 52.10 (4); SEMCAD X Version 14.6.14 (7483) Pin=50mW/Area Scan (61x61x1): Interpolated grid: dx=1.500 mm, dy=1.500 mm Maximum value of SAR (interpolated) = 0.679 W/kg Pin=50mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=8mm, dy=8mm, dz=5mm Reference Value = 28.11 V/m; Power Drift = -0.03 dB Peak SAR (extrapolated) = 0.777 W/kg SAR(1 g) = 0.496 W/kg; SAR(10 g) = 0.325 W/kg (SAR corrected for target medium) Maximum value of SAR (measured) = 0.683 W/kg Report No. : SFBEAD-WTW-P21060534 Date: 2021/08/18 Test Laboratory: Bureau Verita s ADT SAR/HAC Testin…

Text truncated - open the document above for the full version.

Annex Z. Calibration Certificate for Probe and Dipole The SPEAG calibration certificates are shown as follows. Report No. : SFBEAD-WTW-P21060534 Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Accredited by the Swiss Accreditation Service (SAS) The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates S Schweizerischer Kalibrierdienst C s Service suisse d'etalonnage Servizio svizzero di taratura Swiss Calibration Service Accreditation No.: SCS 0108 Client Auden Certificate No: D750V3-1078_Jun21 CALIBRATION CERTIFICATE Object 0750V3 - SN:1078 Calibration procedure(s) QA CAL-05.v11 Calibration Procedure for SAR Validation Sources between 0.7-3 GHz Calibration date: June 21, 2021 This calibration certificate documents the traceability to national standards, which realize the physical units of mea…

Text truncated - open the document above for the full version.