M82-WISE6610V2Gateway

Date: 2024-06-17 FCC ID: M82-WISE6610V2 To the attention of Federal Communications Commission Authorization and Evaluation Division Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization) in order to ensure sensitive business information remains confidential until the actual marketing of the device: External photos Test Setup photos User’s manual Internal Photos Sincerely yours,

PROFESSIONAL INSTALLATION ATTESTATION Date: 2024-06-12 FCC ID: M82-WISE6610V2 We, Advantech Co Ltd hereby declare that requirements of KDB 353028 D01 Antennas Part 15 Transmitters v01 have been met and shown on the following questions. Further we declare that the info listed below are correct and represent the product in consideration under this filing. 1. Professional installation must be justified. Description: Device is outdoor Access Point and must need special trained professional in configuring and installing the product, more details please refer to user manual exhibit. 2. Professional installation does not permit use of any antenna with the transmitter; the permitted types of antenna specified as below. Description: Below listed of Antennas has been compliance FCC Rule Part 15 requirement, more details please refer to test reports. Manufacturer Model Antenna Type Max Gain (dBi) Impedance (Ω) Advantech WISE-6610 Dipole 2.9 50 3. The applicant should address the following items when justifying professional installation. (1) To qualify for professional installation, please explain why the hardware is not readily available to average consumer. Description: Due to this product and will not be sold directly to the general public through retail store, therefore the hardware is not readily available to average consumer. (2) Marketing — Applicant must ensure device cannot be sold via retail to the general public or by mail order. Description: This product and will not be sold directly to the general public through retail store. It will be sold to authorized dealers or installers only.

CARTONG Report of prepress CAR TONG CO.,LTD Customer : P/N Size Category Material Color Remarks Date Participant Tolerance + - Label Manual Box + - 0.2mm + - 2mm + - 5mm + - 2mm AB/F + - 4mm A/F + - 3mm B/F + - 2mm E/F + - 2mm F/F Folding Carton Reference SW-2367 78.50 x 44.00 mm 430432 die maggie 2024/5/8 11:08:36 SWSW label 1:1 CARTONG Report of prepress Drawing: CAR TONG CO.,LTD 5r 78.5 44

FCC ID: M82-WISE6610V2 IC: 9404A-WISE6610V2 The label will be permanently affixed and readily visible. Label location Bottom of EUT

Report No.: MFBEAD-WTW-P21123340A Page No. 1 / 5 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 RF Exposure Report Report No.: MFBEAD-WTW-P21123340A FCC ID: M82-WISE6610V2 Test Model: WISE-6610-NB Series Model: WISE-6610-EL-NB, WISE-6610-XXXXX, WISE6610XXXXX Received Date: 2024/2/2 Date of Evaluation: 2024/4/9 Issued Date: 2024/5/17 Applicant: ADVANTECH CO., LTD Address: No.1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: MFBEAD-WTW-P21123340A Page No. 2 / 5 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 2.4 Calculation Result of Maximum Conducted Power ............................................................................. 5 Report No.: MFBEAD-WTW-P21123340A Page No. 3 / 5 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 Release Control Record Issue No. Description Date Issued MFBEAD-WTW-P21123340A Original Release 2024/5/17 Report No.: MFBEAD-WTW-P21123340A Page No. 4 / 5 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 1 Certificate of Conformity Product: Gateway Brand: ADVANTECH Test Model: WISE-6610-NB Series Model: WISE-6610-EL-NB, WISE-6610-XXXXX, WISE6610XXXXX Sample Status: Engineering Sample Applicant: ADVANTECH CO., LTD Date of Evaluation: 2024/4/9 FCC Rule Part: FCC Part 2 (Section 2.1091) Standards: KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date: 2024/5/17 Vera Huang / Specialist Approved by : , Date: 2024/5/17 Jeremy Lin / Project Engineer Report No.: MFBEAD-WTW-P21123340A Page No. 5 / 5 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f 2 )* 30 30-300 27.5 0.073 0.2 30 300-1500 ... ... f/1500 30 1500-100,000 ... ... 1.0 30 f = Frequency in MHz ; *Plane-wave equivalent power density 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 2.4 Calculation Result of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 923.3 ~ 927.5 25.17 2.9 20 0.128 0.61 Note: 1. Determining compliance based on the result…

Text truncated - open the document above for the full version.

Report No.: RFBEAD-WTW-P21123340A Page No. 1 / 41 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 FCC Test Report Report No.: RFBEAD-WTW-P21123340A FCC ID: M82-WISE6610V2 Test Model: WISE-6610-NB Series Model: WISE-6610-EL-NB, WISE-6610-XXXXX, WISE6610XXXXX (Refer to item 3.1 for the more details) Received Date: 2024/2/2 Test Date: 2024/3/18 ~ 2024/4/9 Issued Date: 2024/5/17 Applicant: ADVANTECH CO., LTD Address: No.1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No.19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is governed by, and incorporates by reference, the Conditions of Testing as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/ and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. Statements of conformity are based on simple acceptance criteria without taking measurement uncertainty into account, unless otherwise requested in writing. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Report No.: RFBEAD-WTW-P21123340A Page No. 2 / 41 Report Format Version: 6.1.1 Reference No.: BEAD-WTW-P24010588 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units ............................................................................................................. 10 3.4.1 Configuration of System under Test .................................................................................................. 10 3.5 General Description of Applied Standards and references ................................................................ 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 29 4.2.1 Limits of Conducted Emission Measurement ................…

Text truncated - open the document above for the full version.

Data Sheet CUSTOMER: Advantech MODEL NAME: WB-AV001_Dipole Ant_HF(163mm) AWAN P/N: AEEEE-000008 B2-F, No. 207-1, Sec. 3, Bei-Hsin Rd., Xindian Dist., New Taipei City, Taiwan (R.O.C.) 1. Des cri pti on--------------------------------------------------------------------------------------- ------------ ------------ --------- 1 1.1 Speci fi cati ons------------------------------------------------------------------------------------------------- ---------- 1 1.2 Antenna Pi cture------------------------------------------------------------------------------ ------------ ------------ -- 1 2 1.3 Antenna Setup Pi cture--------------------------------------------------------------------------- ------------ -------- 2. El ectri cal Speci fi cation----------------------------------------------------------------------------------------------- ---------- 3 2.1 Tes t Equi pment---------------------------------------------------- ------------ ----------- ------------ ------------ ---- - 3 2.2 Tes t Setup----------------------------------------------------- ------------ ------------ ------------ ------------ ---------- 2.2.1 Frequency Range------------------------------------------------------------- ----------- ------------ ----------- 2.2.2 VSWR------------------------------------------------------- ------------ ------------ ------------ ----------- -------- 2.2.3 Radi ati on Pattern & Gai n-------------------------------------------------------------------------- ------------ 3 3 3 4 3. Performance Data------------------------------------------------------------------ ------------ ------------ ------------ --------- 5 3.1 VSWR-------------------------------------------------------- ------------ ------------ ------------ ------------ ----------------- 5 3.2 Radi ati on pattern & Gai n (Di pol e Antenna )------------------------------------------------------------- 6 3.3 Gai n ------------------------------------------------------------------- ------------ ------------ ------------ ------------ ---- 10 4.Mechani cal Speci fi cati on------------------------------------------------------------------------------------------------------- 11 4.1 As s embl y Drawi ng(Di pol e Antenna)----------------------------------------------------- ------- 11 Sep.21.2023. V.0 Page 1 of 11 1 1 1 . . . D D D e e e s s s c c c r r r i i i p p p t t t i i i o o o n n n 1.1 Specifications 1.2 Antenna Picture Antennas Type Dipole Antenna for LoRa application Connector Type RP-SMA Impedance 50Ω Polarization Linear Radiation pattern Omni-directional Frequency 863～928 MHz VSWR ≦3 Peak gain(dBi) 863～928 MHz Upright : 2.9 dBi Bend : 2.23 dBi Cable Loss 863～928 MHz N/A Antenna Dimension L163 xψ15(mm) Dipole Antenna Sep.21.2023. V.0 Page 2 of 11 1.3 Antenna Setup Picture Dipole Antenna(upright) Dipole Antenna(bend) Sep.21.2023. V.0 Page 3 of 11 2 2 2 . . . E E E l l l e e e c c c t t t r r r i i i c c c a a a l l l S S S p p p e e e c c c i i i f f f i i i c c c a a a t t t i i i o o o n n n 2.1 Test Equipment A. VSWR and input impedance: Agilent 8720/8753 Network Analyzer B. Antenna gain and efficiency: ETS three-dimensional anechoic chamber 2.2 Test Setup 2.2.1 Frequency Range A. 600~960 MHz B. 1400～6000 MHz 2.2.2 VSWR Step 1: The antenna is arranged on the customer provided test fixture(see figure. 1). Step 2: The VSWR of the antenna is measured via Agilent 8720/8753 Network Analyzer (see figure. 1). 2.2.3 Radiation pattern and Gain A. The 3D chamber provides less than -40dB reflectivity from 500MHz to 7.125GHz and a 40cm diameter spherical quiet zone. The measurement results are calibrated using both dipoles and standard gain horns (see figure. 2). B. The antenna under tested is arranged in the turned table and a decoupling sleeve is used to reduce feed line radiation (see figure. 3). C. The measured results of the radiation patterns and antenna gain are obtained from the control system and showed on the monitor (see figure. 4 and 5). Figure.1 Sep.21.2023. V.0 Page 4 of 11 Figure. 2 Figure. 3 Figure. 4 Figure. 5 Sep.21.2023. V.0 Page 5 of 11 3 3 3 . . . P P P e e e r r r f f f o o o r r r m m m a a a n n n c c c e e e D D D a a a t t t a a a 3.1 VSWR Dipole Antenna(Upright) Dipole Antenna(Bend) Sep.21.2023. V.0 Page 6 of 11 3.2 Radiation pattern & Gain(Dipole Antenna Upright) Dipole antenna: 863 MHz Dipole antenna: 868 MHz Dipole antenna: 870 MHz Sep.21.2023. V.0 Page 7 of 11 Dipole antenna: 915 MHz Dipole antenna: 928 MHz Sep.21.2023. V.0 Page 8 of 11 Radiation pattern & Gain(Dipole Antenna Bend) Dipole antenna: 863 MHz Dipole antenna: 868MHz Dipole antenna: 870 MHz Sep.21.2023. V.0 Page 9 of 11 Dipole antenna: 915 MHz Dipole antenna: 928 MHz Sep.21.2023. V.0 Page 10 of 11 3.3 Gain Antenna Gain Table: Dipole Antenna Gain(Upright) Frequency XY Plan XZ Plan YZ Plan Max Value (dBi) Average (dBi) Max Value (dBi) Average (dBi) Max Value (dBi) Average (dBi) 863(MHz) 1 -0.51 -0.41 -2.39 0.65 -2.67 868(MHz) 1.81 0.33 0.68 -1.48 1.45 -1.81 870(MHz) 1.43 0.01 0.5 -1.76 1.22 -2.11 915(MHz) -0.17 -1.06 -0.88 -2.31 0.67 -2.65 928(MHz) 1.8 -0.13 1.42 -1.19 2.9 -1.56 Dipole Antenna Gain(Bend) Frequency XY Plan XZ Plan YZ Plan Max Value (dBi) Average (dBi) Max Value (dBi) Average (dBi) Max Value (dBi) Average (dBi) 863(MHz) 1.2 -1.85 1.25 -1.86 1.24 -0.39 868(MHz) 2.08 -0.95 2.22 -1.02 2.23 0.5 870(MHz) 1.82 -1.21 2 -1.28 1.99 0.26 915(MHz) -0.86 -2.51 -0.56 -2.74 -0.44 -1.44 928(MHz) 1.29 -1.29 1.33 -1.65 1.69 -0.4 Sep.21.2023. V.0 Page 11 of 11 4 4 4 . . . M M M e e e c c c h h h a a a n n n i i i c c c a a a l l l S S S p p p e e e c c c i i i f f f i i i c c c a a a t t t i i i o o o n n n 4.1 Dimension Drawing (Dipole Antenna) R R R e e e v v v i i i s s s i i i o o o n n n Revision Date Change Notification Notes Rev.0 2023-09-21 ---