M82-PCMUR02PCM-UR02

Specification 1 / 8 PCM-UR02 Android Mainboard SPEC (V_1.0) Specification 2 / 8 Chapter 1 Product Overview---------------3 1.1 Overview --------------------------3 1.2 Description -------------------3 1.3 Sketch map of appearance and interface ----4 Chapter 2 Hardware Spec----------5 Chapter 3 Dimension drawing -------------7 Chapter 4 Note---------------------------8 Specification 3 / 8 Chapter 1 Product Overview 1.1 Overview PCM-UR02 board is one Android mainboard based on RK3288 chip， with small size,high performance,low power consumption,cost-effective and so on.It supports Ethernet,HDMI,WIFI,Bluetooth,Camera, supports most video and image format, ， supports HDMI/VGA video output，LVDS display driver with dual 8 bits. It also could lighten different sizes of TFT LCD，simplify the system design of the machine, with SD card and SIM card connector ， more strong stability ， suitable for POS cash register、video advertising machine、self-service terminals、smart home and used for various industry applications. 1.2 Description  Full function：with USB/LVDS/MIPI/Ethernet/HDMI/WIFI/Bluetooths on board，simplifing the system design，with SD card connector.  network support ：built in PCI-E connector ；support all kinds of with PCI-E connector，transferring and updating on line，better suited for remote maintenance of POS POS cash register 、 advertising machine,saving labor cost.  Full extended connectors：eight USB2.0(6 sockets,2 standard USB 2.0),3 UART, GPIO/ADC，satisfy all kinds of peripheral needs.  High definition：Maximum support for 4K decoding and different kind Specification 4 / 8 of LCDs with LVDS singnal. 1.3Sketch map of appearance and interface TOP： Bottom： Specification 5 / 8 Chapter 2 Hardware Spec Hardware Spec sheet CPURK3288 Cortex A17 Quad-core @1.6GHz Memory2G FLASHeMMC FLASH 16G WIFI、BluetoothBuilt in Wifi/Bluetooth EthernetX1，10M/100M/1000M USB socket2 USB HOST + 6 USB socket 串口2 RS232 （ttyS1, ttyS3）+1 DB9-ttyS4 Extended memorySupport TF card HDMI outputSupport ，4K LVDS outputSupport Dual LVDS output EDP outputSupport ，1080P Audio outputSupport left/right channel output，Built Speaker、earphone socket、 Mic socket RTCSupport IRSupport Time switchSupport OSAndroid8.1 above OS updatingSupport USB/TF/Network on line updating Working temperature0~60°C Weight(g)147.5 Specification 6 / 8 多媒体支持列表 VideoSupport avi、flv、wmv、rm、rmvb、mpeg 、ts、mp4 etc. ImageSupport JPEG、PNG、GIF、BMP etc. Specification 7 / 8 Chapter 3 Dimension drawing 3.1 PCBDimension PCB：6 Layer Size：146mm*102mm（±0.5mm）, thickness1.6mm（±0.5mm） Screw hole specification：Diameter3mm（±0.5mm） x 4 Specification 8 / 8 Chapter 4 Note During assembly and use, please pay attention to the following problems: 1. Short circuit between bare board and peripherals. 2. Pay attention to anti-static measures during assembly to avoid damaging the motherboard. 3.When installing LVDS panel, pay attention to whether the voltage and current of the panel meet the requirements. Pay attention to the pin pin sequence of the screen socket. 4. When installing LVDS screen, pay attention to whether the screen backlight voltage and current meet the requirements. If the power of the screen backlight is more than 20W, whether to use other power supply boards for power supply. 5. When installing peripherals (USB, IO. Etc), pay attention to the IO level and current output of peripherals. FCC Statement This device complies with part 15 of th e FCC rules. Operation is subject to the following two conditions: (1) thi s device may not cause harmful interference, and (2) this device must accept any interference received, incl uding interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’ s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursua nt to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inte rference in a residential installation. This equipment generates uses and can radiate radio frequency energy a nd, if not installed and used in accordance with the instructions, may cause harmful interference to radio com munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turn ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help important announcement Important Note: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/Canada. This device is intended only for OEM integrators under the following conditions: 1.The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2.The transmitter module may not be co-located with any other transmitter or antenna, 3.For all products market in US, OEM has to limit the operation channels in CH1 to CH11 for 2.4G band by supplied firmware programming tool. OEM shall not supply any tool or info to the end-user regarding to Regulatory Domain change. (if modular only test Channel 1-11) As long as the three conditions above are met, further transmitter testing will not be required. Howe…

Text truncated - open the document above for the full version.

承 認 書 APPROVAL SHEET Customer: 研華 Customer Model No.: 1750009409-01 Part No.: Product Description: Issue Date: REV.: AJDP1J-C0036 Antenna Internal WIFI 1.13/460mm(Gray)IPEX_I 20200707 A 客戶承認用印 安潔承認用印 核准 審核 承辦 Anders Taiwan Anjie Electronics Co., Ltd 台灣安潔電子股份有限公司 ADD: 1F,No.236,Sec.3,Huanbei Rd.,Jubei City,Hsinchu County,30265,Taiwan 地址:新竹線竹北市環北路三段236號1樓 TEL: 886-3-5543399 FAX:886-3-5543062 電話:886-3-5543399 傳真:886-3-5543062 Table of Contents Item 1. Drawing 2. Test Report -Electrical test -Antenna Gain and Efficiency 3. Material Certifications -Antenna -Connector SPECIFICATION Frequency Range 2400~5850MHz Impedance 50Ω V.S.W.R ≦ 2.5 Radiation Omni Gain 2.4G<1.26dBi 5G<0.74 dBi Type PIFA Polarization Vertical Mechanical Properties Connector I-PEX_I Electrical test Antenna Gain and Efficiency Frequency(MHz) 2400 2410 2420 2430 2440 2450 2460 2470 2480 2490 2500 Gain (dBi) 1.26 1.23 0.97 0.86 0.75 0.58 0.17 0.2 0 -0.32 -0.46 Directivity (dBi) 6.13 6.14 5.99 5.92 5.77 5.64 5.27 5.28 5.09 4.87 4.66 Efficiency (dB) -4.86 -4.92 -5.02 -5.06 -5.02 -5.06 -5.1 -5.07 -5.09 -5.19 -5.12 Efficiency (%) 32.63 32.25 31.48 31.16 31.5 31.2 30.91 31.09 30.95 30.3 30.78 Frequency(MHz) 5150 5250 5350 5450 5550 5650 5750 5850 Gain (dBi) -0.63 -0.93 -0.39 0.13 0.74 -0.53 0.68 -0.17 Directivity (dBi) 4.48 3.93 4.35 5.12 5.52 4.48 5.14 4.74 Efficiency (dB) -5.11 -4.86 -4.73 -4.99 -4.78 -5 -4.46 -4.91 Efficiency (%) 30.83 32.64 33.64 31.72 33.26 31.59 35.83 32.27 Antenna 3D Pattern

FCC ID: M82-PCMUR02 TB-RF-074-1.0 Appendix II EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT BT/WIFI ANT. reserved card slot

FCC ID: M82-PCMUR02 TB-RF-074-1.0 Appendix IFCC ID Label Size for the label: 5mm X 5mm FCC ID: M82-PCMUR02 Model: PCM-UR02 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

FCC ID: M82-PCMUR02 TB-RF-074-1.0 Appendix III EUT Internal Photographs Photo 3 Appearance of PCB Photo 4 Appearance of PCB FCC ID: M82-PCMUR02 TB-RF-074-1.0 Photo 5 Appearance of PCB Photo 6 Appearance of PCB FCC ID: M82-PCMUR02 TB-RF-074-1.0 Photo 7 Appearance of PCB

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202208-0126-14 Page: 1 of 6 TB-RF-075-1.0 Maximum Permissible Exposure Evaluation FCC ID: M82-PCMUR02 1. Client Information Applicant : Advantech Co., LTD. Address : No. 1, Alley 20, Lane 26, Rueiguang Road,Neihu District,Taipei 114 Taiwan Manufacturer : RYD Electronic Technology Co., Ltd Address : 16/F, building 18, No.68, Taidong Road, Siming District, Xiamen City, Fujian Province.China. 2. General Description of EUT EUT Name : PCM-UR02 Model(s) No. : PCM-UR02, PCM-UR03 Model Difference : All these models are identical in the same PCB, layout and electrical circuit, the only difference is model name. Product Description : Operation Frequency: Bluetooth V5.0: 2402MHz~2480MHz 802.11b/g/n(HT20): 2412MHz~2462MHz 802.11n(HT40): 2422MHz~2452MHz U-NII-1: 5180MHz~5240MHz U-NII-2A: 5260MHz~5320MHz U-NII-2C: 5500MHz~5700MHz U-NII-3: 5745MHz~5825MHz RF Output Power: BT: 6.75dBm (Max) BLE: 5.16dBm (Max) 2.4G WiFi: 17.79dBm (Max) 5G WiFi: 17.89dBm (Max) Antenna Gain: 1.26dBi PIFA Antenna For 2.4GWIFI&BT 0.74dBi PIFA Antenna For 5GWIFI Power Supply : For adapter: Input: AC 100V-240V, 1A 50/60Hz Output: DC 12V, 3A Software Version : usc_130_160_R1_20210707 Hardware Version : PCM-UR02 01-2 Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202208-0126-14 Page: 2 of 6 TB-RF-075-1.0 MPE Calculations for WIFI 1. Antenna Gain: 2.4GWIFI&BT PIFA Antenna:1.26dBi. 5GWIFI PIFA Antenna:1.26dBi 2. EUT Operation Condition: Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. 3. Exposure Evaluation: Equation from page 18 of OET Bulletin 65, Edition 97-01 S=(PG)/4πR 2 Where S: power density P: power input to the antenna G: power gain of the antenna in the direction of interest relative to an isotropic radiator. R: distance to the center of radiation of the antenna 4. Test Result: Worst Maximum MPE Result Bluetooth Mode N TX Freq. (MHz) Conducted Power(max) (dBm) Turn-up Power (dB) Max tune up power (dBm) [P] ANT Gain (dBi) [G] Distance (cm) [R] Power Density (mW/ cm 2 ) [S] GFSK 1 2402 5.79 6±1 7 1.26 20 0.0013 2441 6.31 6±1 7 1.26 20 0.0013 2480 6.75 7±1 8 1.26 20 0.0017 π/4-DQPSK 1 2402 4.75 5±1 6 1.26 20 0.0011 2441 5.11 5±1 6 1.26 20 0.0011 2480 5.42 5±1 6 1.26 20 0.0011 8-DPSK 1 2402 5.27 5±1 6 1.26 20 0.0011 2441 5.4 5±1 6 1.26 20 0.0011 2480 5.58 6±1 7 1.26 20 0.0013 Report No.: TBR-C-202208-0126-14 Page: 3 of 6 TB-RF-075-1.0 BLE 1Mbps 1 2402 4.71 5±1 6 1.26 20 0.0011 1 2440 5.01 5±1 6 1.26 20 0.0011 1 2480 5.14 5±1 6 1.26 20 0.0011 2Mbps 1 2402 4.8 5±1 6 1.26 20 0.0011 1 2440 5.01 5±1 6 1.26 20 0.0011 1 2480 5.16 5±1 6 1.26 20 0.0011 2.4G WiFi 802.11b 1 2412 17.60 18±1 19 1.26 20 0.0211 1 2437 17.81 18±1 19 1.26 20 0.0211 1 2462 17.96 18±1 19 1.26 20 0.0211 802.11g 1 2412 17.04 17±1 18 1.26 20 0.0168 1 2437 17.40 17±1 18 1.26 20 0.0168 1 2462 17.54 18±1 19 1.26 20 0.0211 802.11n20 1 2412 17.92 18±1 19 1.26 20 0.0211 1 2437 17.00 17±1 18 1.26 20 0.0168 1 2462 17.15 17±1 18 1.26 20 0.0168 802.11n40 1 2422 17.21 17±1 18 1.26 20 0.0168 1 2437 17.26 17±1 18 1.26 20 0.0168 1 2452 17.41 17±1 18 1.26 20 0.0168 5G WiFi 11A 1 5180 17.08 17±1 18 0.74 20 0.0149 1 5200 17.15 17±1 18 0.74 20 0.0149 1 5240 17.06 17±1 18 0.74 20 0.0149 1 5260 17.11 17±1 18 0.74 20 0.0149 1 5280 16.73 17±1 18 0.74 20 0.0149 1 5320 16.24 16±1 17 0.74 20 0.0118 1 5500 16.15 16±1 17 0.74 20 0.0118 1 5580 16.31 16±1 17 0.74 20 0.0118 1 5700 16.59 17±1 18 0.74 20 0.0149 Report No.: TBR-C-202208-0126-14 Page: 4 of 6 TB-RF-075-1.0 1 5745 17.01 17±1 18 0.74 20 0.0149 1 5785 17.34 17±1 18 0.74 20 0.0149 1 5825 17.56 18±1 19 0.74 20 0.0187 11N20 1 5180 17.16 17±1 18 0.74 20 0.0149 1 5200 17.30 17±1 18 0.74 20 0.0149 1 5240 17.17 17±1 18 0.74 20 0.0149 1 5260 17.16 17±1 18 0.74 20 0.0149 1 5280 16.88 17±1 18 0.74 20 0.0149 1 5320 16.47 16±1 17 0.74 20 0.0118 1 5500 17.48 17±1 18 0.74 20 0.0149 1 5580 17.63 18±1 19 0.74 20 0.0187 1 5700 16.48 16±1 17 0.74 20 0.0118 1 5745 16.99 17±1 18 0.74 20 0.0149 1 5785 17.13 17±1 18 0.74 20 0.0149 1 5825 17.38 17±1 18 0.74 20 0.0149 11N40 1 5190 17.84 18±1 19 0.74 20 0.0187 1 5230 17.82 18±1 19 0.74 20 0.0187 1 5270 17.67 18±1 19 0.74 20 0.0187 1 5310 17.22 17±1 18 0.74 20 0.0149 1 5510 16.79 17±1 18 0.74 20 0.0149 1 5550 17.69 18±1 19 0.74 20 0.0187 1 5670 16.44 16±1 17 0.74 20 0.0133 1 5755 16.99 17±1 18 0.74 20 0.0168 1 5795 17.22 17±1 18 0.74 20 0.0118 11AC20 1 5180 16.26 16±1 17 0.74 20 0.0118 1 5200 16.42 16±1 17 0.74 20 0.0118 1 5240 16.50 17±1 18 0.74 20 0.0149 1 5260 16.43 16±1 17 0.74 20 0.01118 1 5280 17.89 18±1 19 0.74 20 0.0187 Report No.: TBR-C-202208-0126-14 Page: 5 of 6 TB-RF-075-1.0 1 5320 17.32 17±1 18 0.74 20 0.0149 1 5500 17.07 17±1 18 0.74 20 0.0149 1 5580 17.18 17±1 18 0.74 20 0.0149 1 5700 17.85 18±1 19 0.74 20 0.0187 1 5745 16.59 17±1 18 0.74 20 0.0149 1 5785 17.42 17±1 18 0.74 20 0.0149 1 5825 17.52 18±1 19 0.74 20 0.0187 11AC40 1 5190 17.69 18±1 19 0.74 20 0.0187 1 5230 17.73 18±1 19 0.74 20 0.0187 1 5270 17.47 17±1 18 0.74 20 0.0149 1 5310 17.06 17±1 18 0.74 20 0.0149 1 5510 17.54 18±1 19 0.74 20 0.0187 1 5550 17.58 18±1 19 0.74 20 0.0187 1 5670 17.00 17±1 18 0.74 20 0.0149 1 5755 17.44 17±1 18 0.74 20 0.0149 1 5795 17.76 18±1 19 0.74 20 0.0187 11AC80 1 5210 17.86 18±1 19 0.74 20 0.0187 1 5290 17.51 18±1 19 0.74 20 0.0187 1 5530 17.38 17±1 18 0.74 20 0.0149 1 5610 16.70 17±1 18 0.74 20 0.0149 1 5775 16.95 17±1 18 0.74 20 0.01498 Note: (1) N TX = Number of Transmit Antennas (2) RF Output power specifies that Maximum Conducted Peak Output Power. Report No.: TBR-C-202208-0126-14 Page: 6 of 6 TB-RF-075-1.0 5. Conclusion: As specified in Table 1B of 47 CFR 1.1310- Limits for Maximum Permissible Exposure (MPE), Limits for General Population/ Uncontrolled Exposure Frequency Range (MHz) Powe…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202208-0126-1 Page: 1 of 49 FCC ID: M82-PCMUR02 TB-RF-074-1.0 RF Test Data for Bluetooth (BDR+EDR) (Conducted Measurements) General Description of EUT Product Name: PCM-UR02 Test Model: PCM-UR02 Sample ID: 202208-0126-1-02 Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 12V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202208-0126-1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202208-0126-1 Page: 2 of 49 FCC ID: M82-PCMUR02 TB-RF-074-1.0 Contents 1. 20dB Emission Bandwidth ..................................................................................................... 3 1.1.Test Result ................................................................................................................ 3 1.2.Test Graphs .............................................................................................................. 4 2. Occupied Channel Bandwidth ............................................................................................... 7 2.1.Test Result ................................................................................................................ 7 2.2.Test Graphs .............................................................................................................. 8 3. Maximum conducted output power ................................................................................... 11 3.1.Test Result .............................................................................................................. 11 3.2.Test Graphs ............................................................................................................ 12 4. Carrier frequency separation .............................................................................................. 15 4.1.Test Result .............................................................................................................. 15 4.2.Test Graphs ............................................................................................................ 16 5. Time of occupancy .............................................................................................................. 17 5.1.Test Result .............................................................................................................. 17 5.2.Test Graphs ............................................................................................................ 18 6. Number of hopping channels .............................................................................................. 21 6.1.Test Result .............................................................................................................. 21 6.2.Test Graphs ............................................................................................................ 22 7.Band edge measurements ................................................................................................... 23 7.1.Test Result .............................................................................................................. 23 7.2.Test Graphs ............................................................................................................ 24 8. Conducted Spurious Emission ............................................................................................. 28 8.1.Test Result .............................................................................................................. 28 8.2.Test Graphs ............................................................................................................ 29 9. Duty Cycle ............................................................................................................................ 38 9.1.Test Result .............................................................................................................. 38 9.2.Test Graphs ............................................................................................................ 39 10. Emissions in Restricted Bands ........................................................................................... 42 10.1.Test Result ............................................................................................................ 42 10.2.Test Graphs .......................................................................................................... 44 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202208-0126-1 Page: 3 of 49 FCC ID: M82-PCMUR02 TB-RF-074-1.0 1. 20dB Emission Bandwidth 1.1.Test Result TestMode Antenna Channel 20db EBW[MHz] Limit[MHz] Verdict DH5 Ant1 2402 1.06 --- --- 2441 1.01 --- --- 2480 1.01 --- --- 2DH5 Ant1 2402 1.37 --- --- 2441 1.36 --- --- 2480 1.36 --- --- 3DH5 Ant1 2402 1.34 --- --- 2441 1.31 --- --- 2480 1.31 --- --- Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202208-0126-1 Page: 4 of 49 FCC ID: M82-PCMUR02 TB-RF-074-1.0 1.2.Test Graphs DH5_Ant1_2402 DH5_Ant1_2441 DH5_Ant1_2480 2DH5_Ant1_2402 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202208-0126-1 Page: 5 of 49 FCC ID: M82-PCMUR02 TB-RF-074-1.0 2DH5_Ant1_2441 2DH5_Ant1_2480 3DH5_Ant1_2402 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Buil…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202208-0126-1 Page: 1 of 54 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: M82-PCMUR02 Original Grant Report No. : TBR-C-202208-0126-1 Applicant : Advantech Co., LTD. Equipment Under Test (EUT) EUT Name : PCM-UR02 Model No. : PCM-UR02 Series Model No. : PCM-UR03 Brand Name : ---- Sample ID : 202208-0126-1-01& 202208-0126-1-02 Receipt Date : 2022-09-01 Test Date : 2022-09-01 to 2022-09-15 Issue Date : 2022-09-15 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Camille Li Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202208-0126-1 Page: 2 of 54 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 7 1.4 Description of Support Units .............................................................................................. 7 1.6 Description of Test Software Setting ................................................................................ 9 1.7 Measurement Uncertainty .................................................................................................. 9 1.8 Test Facility ......................................................................................................................... 10 2. TEST SUMMARY ..................................................................................................................... 11 3. TEST SOFTWARE ................................................................................................................... 11 4. TEST EQUIPMENT .................................................................................................................. 12 5. CONDUCTED EMISSION ....................................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 15 6.3 Test Procedure ................................................................................................................... 17 6.4 Deviation From Test Standard ......................................................................................... 18 6.5 EUT Operating Mode ........................................................................................................ 18 6.6 Test Data ............................................................................................................................. 18 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 19 7.1 Test Standard and Limit .................................................................................................... 19 7.2 Test Setup ........................................................................................................................... 19 7.3 Test Procedure ................................................................................................................... 20 7.4 Deviation From Test Standard ......................................................................................... 21 7.5 EUT Operating Mode ........................................................................................................ 21 7.6 Test Data ............................................................................................................................. 21 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 22 8.1 Test Standard and Limit .................................................................................................... 22 8.2 Test Setup ........................................................................................................................... 22 8.…

Text truncated - open the document above for the full version.

FCC ID: M82-PCMUR02 TB-RF-074-1.0 Appendix V EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Below 1 GHz) FCC ID: M82-PCMUR02 TB-RF-074-1.0 Photo of Setup for Conducted Emission -----END OF REPORT-----