M82-PWS440Computer

User Manual PWS-440 Computer PWS-440 User Manualii About This Manual This manual explains how to install, operate and maintain the PWS-440 Computer. No part of this publication may be reproduced or used in any form, or by any electri- cal or mechanical means, without permission in writing from the manufacturer. This includes electronic or mechanical means, such as photocopying, recording, or infor- mation storage and retrieval systems. The material in this manual is subject to change without notice. Advantech has many years experience in designing computers to meet severe envi- ronmental applications. These applications include those found by military as well as industrial users. The PWS-440 has been designed to comply with the relevant requirements of MIL-STD-810G, MIL-STD-461E and IP67. These include EMC, EMI, temperature, Shock, vibration, humidity, dust and water. In addition the PWS-440 has been developed to be reliable under all operational conditions that may be encoun- tered by military services throughout the world. © Copyright 2013 Advantech Co., Ltd. All rights reserved. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Regulatory Compliance Statements FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION! Exposure to Radio Frequency Radiation. The radiated output power of this device is far below the FCC radio frequency exposure limits. Nevertheless, the device shall be used in such a manner that the potential for human contact during normal operation is minimized. When connecting an external antenna to the device, the antenna shall be placed in such a manner to minimize the potential for human contact during normal operation. Part No. XXXXXXXXXXEdition 1 Printed in TaiwanApril 2013 iiiPWS-440 User Manual Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B dig- ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try and correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the distance between the equipment and the receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The maximum SAR value reported is 0.082 => the SAR value to be define after SAR test Canada-Industry Canada (IC) The wireless radio of this device complies with RSS 210 Industry Can- ada. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B conforme á la norme NMB003du Canada. Europe-European Union Notice Radio products with the CE alert marking comply with the R&TTE Directive (1999/5/ EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards). EN 60950-1 (IEC60950-1) - Product Safety EN 300 328 Technical requirement for radio equipment ETS 301 489 General EMC requirements for radio equipment. Products that contain the radio transmitter are labeled with CE alert marking and may also carry the CE logo. PWS-440 User Manualiv Safety Use the following safety guidelines to help protect yourself and the PWS-440. Do not attempt to service the PWS-440 yourself. Always follow installation instructions closely. Be sure that nothing rests on the AC adapter's power cable and that the cable is not located where it can be tripped over or stepped on. Do not cover the AC adapter with papers or other items that will reduce cooling; also, do not use the AC adapter while it is inside a carrying case. Use only the AC adapter, power cord, and batteries that are approved for use with this PWS-440. Use of another type of battery or AC adapter may cause risk of fire or explosion. If you use an extension cable with the AC adapter, ensure that the total ampere rating of the products plugged in to the extension cable does not exceed the ampere rating of the extension cable. When you move the PWS-440 between environments with very different tem- perature and/or humidity ranges, condensation may form on or within the PWS- 440. To avoid damaging the PWS-440, allow sufficient time for the moisture to evaporate before using the PWS-440. When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. As you pull out the connector, keep it evenly aligned to avoid bending any connector pins. Also, before you connect a cable make sure both connectors are correctly oriented and aligned. Battery Safety There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Do not dispose of batteries in a fire. They may explode. Check with local author- ities for disposal instructions. Notices This unit is equipped with a battery pack and backup battery. It is possible that the PDA may not power-on due to battery discharge as a result of storage. In the above situation, insert the PDA into the cradle and connect the AC adapter. Recharge t…

Text truncated - open the document above for the full version.

PWS-440 User Manual28 Chapter4 4Getting Connected PWS-440 User Manual30 4.1 Installing Microsoft ActiveSync In order to exchange data between your computer and the PWS-440 and install extra applications or utilities to the PWS-440, Microsoft ActiveSync must be installed on your computer. Connect the PWS-440 to a PC using a USB type B cable. Download the latest version of Microsoft ActiveSync from the Microsoft website. 4.1.1 Connecting to Your Computer 1.After ActiveSync has been installed, connect the USB B cable to the USB port on your PWS-440. 2.Plug the other end of the USB cable into a USB port on your computer. 3.Turn the device on. 4.ActiveSync starts automatically and configure the USB port to work with the PWS-440. The New Partnership setup wizard will automatically start. Note!If you have a previous version of the Microsoft ActiveSync installed in your computer, uninstall it first before installing the latest version of Microsoft ActiveSync. Note!If ActiveSync doesn’t start automatically, click Start -> Programs -> Microsoft 31PWS-440 User Manual Chapter 4 Getting Connected ActiveSync. If a message appears indicating that it is unable to detect a connection, click the Cancel button and manually configure the communication settings. 1.Follow the onscreen instructions. 2.When the configuration process is complete, the ActiveSync window appears. 3.Synchronization will be initialized and will take place if you’ve chosen to syn- chronize periodically or upon connection. 4.ActiveSync detects the PWS-440 and establishes a connection. 5.Click No, and then click Next. PWS-440 User Manual32 4.2 Connecting with Bluetooth Your device is equipped with Bluetooth wireless technology that you can use to syn- chronize information with a computer equipped with a Bluetooth adapter or access point. Bluetooth wireless technology allows you to communicate with the computer whenever it is within range. Follow these instructions to set up a Bluetooth connec- tion. 1.Tap Start ->Settings -> Control Panel and double-tap Bluetooth Device Properties. The Bluetooth Manager opens. 2.Tap Scan Device. Bluetooth Manager scans for local Bluetooth devices and dis- plays a list of all Bluetooth enabled devices within range. 3.Double tap a device in the list to display a context menu. 4.Tap Trusted to add the device to the trusted Bluetooth devices list. You are prompted to authenticate the device. If you want to authenticate the device now, go to step 5. Otherwise, go to step 7. 33PWS-440 User Manual Chapter 4 Getting Connected 5.Tap Yes to authenticate the device. You are prompted for the device’s pin code. Enabling trusted devices to the Bluetooth manager’s list. You can mark the device as trusted without authenticating the device by tapping No when prompted to authenticate the device. 6.Enter the pin code and tap OK to authenticate the device. Tap No to cancel authentication. Trusted: Tap to add or remove the device from the trusted device list. When checked, the red X on the key next to the device is removed. Active: Tap to make the device active or inactive. Authenticate: Tap to authenticate the device and add the device to the trusted devices list. Encrypt: Tap to enable or disable encryption of data transferred between the PWS- 440 and a Bluetooth device. Delete: Deletes the device from the Bluetooth Manager list Note!If you enter the wrong pin code, an authentication fail message appears. The red X disappears on the entry’s key icon, and the context menu’s additional options become available. The additional options are described as follows: PWS-440 User Manual34 4.3 Connecting to a WLAN (WiFi) Through a WiFi (wireless) connection you can add a new network, connect to an existing network, change the advanced wireless settings and view wireless network- ing log information. To establish a WiFi connection, follow the steps below: 1.From START -> PROGRAM -> Utility -> “PwrCtrl”, and choose WLAN “ON” . Then, click on the WIFI icon. 2.Select the Wireless Information tab to display the available options. 35PWS-440 User Manual Chapter 4 Getting Connected 4.3.1 Add a New Network 1.To add a new network, double-click Add New. PWS-440 User Manual36 2.When the following screen displays, input the required parameters as explained in the following table: 3.Click OK to connect. 4.3.2 Connect to an Existing Network 1.Select a network from the list and press Connect or right-click for more options. 2.Click OK to connect. 37PWS-440 User Manual Chapter 4 Getting Connected 4.4 Connecting GPS To run GPS Demo program, it need to download VisualGPS from internet. Copy this program onto Deskonchip1 to save, and double tag to install VisualGPS as follow instruction. Copy “visualGPSceinstall.CAB” to PWS-440 ®C Desktop, and execute “visualGPS- ceinstall.CAB” on desktop. Follow these instructions to set up a GPS connection. 1.From START -> PROGRAM -> Utility -> “PwrCtrl”, and choose GPS “ON”. PWS-440 User Manual38 2.Tap Start -> Program -> VisualGPS. 3.Click COM2. and Baudrate 9600. Then, OPEN GPS to start the “GPS”. 4.When GPS is active, click GPS status to display the satellite status. 5.Allow approximately 60 seconds (very first time) for GPS longitude and latitude display. Note: GPS display approximately time depend on the environment. 41PWS-440 User Manual Chapter 4 Getting Connected 4.5 COM Port list Below is reference for COM Port list. COM No. Indicate 0 Cradle 1 RS232 2 RS232 / 422(Optional) /485 (Optional) 3 Virtual COM port 4 Virtual COM port 5 GPS (baud:9600) 6 BT (baud:921600) 7 ActiveSync 8 Visual COM port 9 Visual COM port PWS-440 User Manual42 Chapter5 5Advance Settings PWS-440 User Manual44 5.1 Checking the Battery Status This section describes how to view the power level for both the main and backup bat- tery and how to set power saving options. To check the main and backup battery sta- tus: 1.Open Power Properties. Tap Start -> Settings -> Control Panel. Then double- tap Power. The Power screen appears. 2.The batte…

Text truncated - open the document above for the full version.

先進數位科技股份有限公司 AQF-PR-03-A 2.4G Antenna MODEL: WBA-240 P/N:WBA-240-081-100-IPEX(III) SPECIFICATION-ELECTRIC 1. WORKING FREQUENCE 2.400-2.500GHz 2. ELECTRIC WAVE 1/2 λ ：DIPOLE 3. IMPEDANCE 50 Ohm , Nominal 4. V.S.W.R 1.8 MAX 5. GAIN 2.0 dBi 6. RADIATION 0 mni 7. POLARIZATION VERTICAL 8. POWER HANDLING 1 W MAX 9. OPERATING TEMPERATURE -20°C -- +50°C 先進數位科技股份有限公司 AQF-PR-03-A 先進數位科技股份有限公司 AQF-PR-03-A SGS REPORT Rev.2I-PEX Co.,Ltd.Sheet 1 of 1 SUBJECT: Survey for Environmental-Related Substances I-PEX Co.,Ltd.Japan This ia applied for the following products: I-PEX Product NameI-PEX Part Number MHF PLUG Connector 20278-111R-08 20278-111R-13 20278-111R-32 20278-111R-18 20351-111R-37 Attachment: Survey Form on Environmental Impact Substances Contained in Parts and Materials SGS TEST REPORT for MHF PLUG connector Please refer to the attached SGS REPORT. Component nameSGS Report No. HOUSING (White)CE_2007_46123 HOUSING (Black)CE_2007_46124 CONTACTCE_2007_46148 GROUND CONTACTCE_2007_46149 Remark:* The SGS Test Report can be applied to a component. The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report Sample Description : Style/Item No. : Sample Receiving Date : Testing Period : ============================================================================================ Test Result(s) : 2007/04/25 2007/04/25 TO 2007/05/02 I-PEX JP CO., LTD. 6-27-19 HARAMACHIDA MACHIDA-CITY TOKYO 194-0013 JAPAN *CE/2007/46149* No.: CE/2007/46149 Date: 2007/05/02 Page: 1 of 4 The following sample(s) was/were submitted and identified by/on behalf of the client as : Please refer to next page(s). MHF PLUG GROUND CONTACT 1927-231 The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report Test Result(s) PART NAME NO.1 : Result No.1 Cadmium (Cd)mg/kgWith reference to IEC 62321, Ed.1 111/54/CDV. Determination of Cadmium by ICP-AES. 2n.d. Lead (Pb)mg/kgWith reference to IEC 62321, Ed.1 111/54/CDV. Determination of Lead by ICP-AES. 211 Mercury (Hg)mg/kgWith reference to IEC 62321, Ed.1 111/54/CDV. Determination of Mercury by ICP-AES. 2n.d. Hexavalent Chromium Cr(VI) by alkaline extraction mg/kgWith reference to IEC 62321, Ed.1 111/54/CDV. Determination of Hexavalent Chromium by UV/Vis Spectrometry. 2n.d. Copper (Cu)%With reference to US EPA Method 3050B for Copper Content. Analysis was performed by ICP- AES. 0.000291.845 Gold (Au)mg/kgWith reference to US EPA Method 3050B for Gold Content. Analysis was performed by ICP-AES. 22305 Nickel (Ni)%With reference to US EPA Method 3050B for Nickel Content. Analysis was performed by ICP- AES. 0.00023.005 I-PEX JP CO., LTD. No.: CE/2007/46149 6-27-19 HARAMACHIDA MACHIDA-CITY TOKYO 194-0013 JAPAN Date: 2007/05/02 Page: 2 of 4 *CE/2007/46149* Test Item (s):UnitMethodMDL Note：1. mg/kg = ppm 2. n.d. = Not Detected 3. MDL = Method Detection Limit GOLDEN COLORED METAL The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. The content of this PDF file is in accordance with the original issued reports for reference only. This Test Report cannot be reproduced, except in full, without prior written permission of the Company SGS TAIWAN LIMITED NO. 136-1, Wu Kung Road, WuKu Industrial Zone, Taipei county, Taiwan. t(886-2) 22993939 f(886-2) 2299-3237 www.sgs.com.tw . Any unauthorized alteration, forgery or falsification of the content or appearance of this report is unlawful and offenders may be prosecuted to the fullest extent of the law. Test Report 6-27-19 HARAMACHIDA MACHIDA-CITY TOKYO 194-0013 JAPAN I-PEX JP CO., LTD. No.: CE/2007/46149 Date: 2007/05/02 Page: 3 of 4 *CE/2007/46149* 1…

Text truncated - open the document above for the full version.

2.4G Antenna MODEL: PA-240A P/N:PA-240A-0.81-100-IPEX III SPECIFICATION-ELECTRIC 1. WORKING FREQUENCE 2.400-2.500GHz 2. ELECTRIC WAVE DIPOLE 3. IMPEDANCE 50 Ohm , Nominal 4. V.S.W.R 2.0 5. GAIN 0~2.0 dBi 6. RADIATION Omni 7. POLARIZATION VERTICAL 8. POWER HANDLING 1 W MAX 9. OPERATING TEMPERATURE -20°C -- +50°C 10. Size 4.5x32x0.8mm (+/-1)

RF_160, Issue 03 Declaration of Authorization We Name: Advantech Co Ltd Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, City: Taipei 114 Country: Taiwan, R.O.C. Declare that: Name Representative of agent: Rubeca.Yu Agent Company name: Compliance Certification Services Inc. Address: NO. 989-1 Wen Shan Rd., Shang Shan Village, Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C City: Hsinchu County Country : Taiwan, R.O.C is authorized to apply for Certification of the following product(s): Product description: Computer Type designation: PWS-440; PWS-440XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Trademark: ADVANTECH on our behalf. Date: 2013-07-31 Signature: Name/Title: Lily Huang / Supervisor Company Name: Advantech Co., Ltd. Notes: (1): Required for FCC application (2): For FCC it must be the Grantee Code “owner” or the authorized agent.

DECLARATION OF CONFORMITY (DoC) Equipment:Computer Trademark(s) and Model(s):ADVANTECH / PWS-440; PWS- 440XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Manufacturer:Advantech Co Ltd FCC ID in case other parts of this equipment are subject to certification: M82-PWS440 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number:Issue date: T130312L06-PR1 2013-5-15 T130312L06-PR1-1 2013-5-15 Company name: Advantech Co., Ltd. Name/Title (legal representative): Lily Huang / Supervisor Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Phone: 886-2-2792-7818#1412 Fax: 886-2-2794-7334 E-mail: [email protected] Date: 2013-07-31 Signature:

Report No.T130312L06 Page 1 of 7 External Photo Report No.T130312L06 Page 2 of 7 Report No.T130312L06 Page 3 of 7 Power Adapter (Model : AD4212B) Report No.T130312L06 Page 4 of 7 Report No.T130312L06 Page 5 of 7 (Model : Au-799lm) Report No.T130312L06 Page 6 of 7 Report No.T130312L06 Page 7 of 7 Battery (Model : 46-12216-041)

Label Location

Report No.T130312L06 Page 1 of 19 Internal Photo Report No.T130312L06 Page 2 of 19 Report No.T130312L06 Page 3 of 19 Report No.T130312L06 Page 4 of 19 Report No.T130312L06 Page 5 of 19 Report No.T130312L06 Page 6 of 19 Report No.T130312L06 Page 7 of 19 Report No.T130312L06 Page 8 of 19 Report No.T130312L06 Page 9 of 19 Report No.T130312L06 Page 10 of 19 Report No.T130312L06 Page 11 of 19 Report No.T130312L06 Page 12 of 19 Report No.T130312L06 Page 13 of 19 Report No.T130312L06 Page 14 of 19 Report No.T130312L06 Page 15 of 19 Report No.T130312L06 Page 16 of 19 Report No.T130312L06 Page 17 of 19 Report No.T130312L06 Page 18 of 19 Report No.T130312L06 Page 19 of 19 Antenna

Compliance Certification Services Inc. FCC ID: M82-PWS440 Report No: T130312L06-SF Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 31 Rev. 00 ANSI/IEEE Std. C95.1-1992 in accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C FCC TEST REPORT For Computer Trade Name: ADVANTECH Model: PWS-440; PWS-440XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Issued to Advantech Co. Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wugong 6th Rd., Wugu Dist., New Taipei City 24891, Taiwan. (R.O.C.) http://www.ccsrf.com [email protected]. Issued Date: 2013/05/06 Compliance Certification Services Inc. Report No: T130312L06-SF Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 2013/05/06 Initial Issue ALL Anson Lu Compliance Certification Services Inc. Report No: T130312L06-SF Page 3 Rev. 00 Table of contents 1 Certificate of Compliance (SAR Evaluation) ............................................................... 4 2 EUT Description ...................................................................................................... 5 3 Requirements for Compliance Testing Defined .......................................................... 6 3.1 Requirements for Compliance Testing Defined by the FCC ........................................................................ 6 4 Dosimetric Assessment System ................................................................................ 6 4.1 Measurement System Diagram ....................................................................................................................... 7 4.2 System Components .......................................................................................................................................... 8 5 Evaluation Procedures ........................................................................................... 11 6 Measurement Uncertainty ..................................................................................... 15 7 Exposure Limit ...................................................................................................... 16 8 Tissue Dielectric Properties .................................................................................... 17 8.1 Test Liquid Confirmation ................................................................................................................................. 17 8.2 Typical Composition of Ingredients for Liquid Tissue Phantoms .............................................................. 18 8.3 Simulating Liquids Parameter Check Results ............................................................................................... 19 9 System Performance Check .................................................................................... 20 9.1 System Performance Check Results .............................................................................................................. 21 10 Device Under Test ................................................................................................. 22 10.1 Simultaneous Transmission ............................................................................................................... 22 11 Summary of Test Configurations ............................................................................ 23 11.1 Body Test Exclusion Thresholds ......................................................................................................... 23 11.2 Body Exposure Conditions for WiFi ................................................................................................... 23 12 RF Output Power Measurement ............................................................................. 24 12.1 WiFi (2.4 GHz Band) ........................................................................................................................... 24 12.2 Bluetooth ........................................................................................................................................... 25 13 SAR Measurements Results ................................................................................... 26 13.1 Summary of Highest SAR Values .................................................................................................................... 27 14 Antenna Locations & Separation Distances ............................................................. 28 15 Equipment List & Calibration Status ....................................................................... 29 16 Facilities ............................................................................................................... 30 17 Reference ............................................................................................................. 30 18 Attachments ......................................................................................................... 31 Compliance Certification Services Inc. Report No: T130312L06-SF Page 4 Rev. 00 1 Certificate of Compliance (SAR Evaluation) Applicant Advantech Co. Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Equipment Under Test: Computer Trade Name: ADVANTECH Model Number: PWS-440; PWS-440XXXXXXXXXXXXXXXX(where "X" may be any alphanumeric character , “-” or blank) Date of Test: May 06, 2013 Device Category: PORTABLE DEVICES Exposure Category: GENERAL POPULATION/UNCONTROLLED EXPOSURE Applicable Standards FCC  FCC OET 65 Supplement C  IEEE 1528 2003  KDB 447498 D01 General RF Exposure Guidance v05r01  KDB 648474 D04 SAR Handsets v01r01 …

Text truncated - open the document above for the full version.

FCC ID : M82-PWS440 Report No.T130312L06-RP1 Page 1 / 58 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. FCC 47 CFR PART 15 SUBPART C AND ANSI C63.4:2009 TEST REPORT For Computer Model : PWS-440 Data Applies To : PWS-440XXXXXXXXXXXXXXXX (where “X” may be any alphanumeric character, “-” or blank) Trade Name : ADVANTECH Issued for Advantech Co Ltd No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Hsinchu Lab. NO. 989-1 Wen Shan Rd., Shang Shan Village, Qionglin Shiang Hsinchu County 30741, Taiwan, R.O.C TEL: +886-3-5921698 FAX: +886-3-5921108 http://www.ccsrf.com E-Mail : [email protected] Issued Date: May 15, 2013 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. FCC ID : M82-PWS440 Report No.T130312L06-RP1 Page 2 / 58 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 05/15/2013 Initial Issue ALL Victoria Liu FCC ID : M82-PWS440 Report No.T130312L06-RP1 Page 3 / 58 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION ................................................................................ 4 2. EUT DESCRIPTION ..................................................................................................... 5 3. DESCRIPTION OF TEST MODES ............................................................................... 6 4. TEST METHODOLOGY ............................................................................................... 7 5. FACILITIES AND ACCREDITATION ........................................................................... 7 5.1 FACILITIES ............................................................................................................ 7 5.2 ACCREDITATIONS................................................................................................ 7 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 8 6. SETUP OF EQUIPMENT UNDER TEST..........…

Text truncated - open the document above for the full version.