M82-TREK-753CDMAComputer

User Manual TREK-753 Computer Copyright The documentation and the software included with this product are copyrighted 2010 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe- ments of the rights of third parties, which may result from its use. Acknowledgements Intel and Atom are trademarks of Intel Corporation. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details. If you think you have a defective product, follow these steps: 1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs. 2.Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3.If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly. 4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service. 5.Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. Part No. Edition 1 Printed in Taiwan August 2011 TREK-753 User Manualii Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclo- sure products. FCC Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: „Reorient or relocate the receiving antenna. „Increase the separation between the equipment and receiver. „Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. „Consult the dealer or an experienced radio/TV technician for help. Technical Support and Assistance 1.Visit the Advantech web site at http://support.advantech.com where you can find the latest information about the product. 2.Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –Product name and serial number –Description of your peripheral attachments –Description of your software (operating system, version, application software, etc.) –A complete description of the problem –The exact wording of any error messages You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. According to FCC 15.407(e), the device is intended to operate in the frequency band of 5.15GHz to 5.25GHz under all conditions of normal operation. Normal operation of this device is restricted to indoor used only to reduce any potential for harmful interference to co-channel MSS operations. iiiTREK-753 User Manual Warnings, Cautions and Notes Warning!Warnings indicate conditions, which if not observed, can cause personal injury! Caution!Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer's instructions. Note!Notes provide optional…

Text truncated - open the document above for the full version.

Company Address : No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Date :2012/6/26 DTS‐UNII Device Declaration Letter To whom it may concern : We have declared below featured for FCC equipment authorization, Device FCC ID : M82‐TREK‐753CDMA (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability , N/A (2) Active / Passive Scanning , adhoc mode access point capability(以每個Band來填) Frequency Band (MHz) Active Scanning (the device can transmit a probe (beacon)) passive scanning (where the device is can listen only with no probes) Ad Hoc Mode or WIFI Direct capability Access point capability 2412~2462 Yes , No Yes , No Yes , No Yes , No 2422~2452 Yes , No Yes , No Yes , No Yes , No 5180~5240 Yes , No Yes , No Yes , No Yes , No 5500~5700 Yes , No Yes , No Yes , No Yes , No 5620~5320 Yes , No Yes , No Yes , No Yes , No 5725~5850 Yes , No Yes , No Yes , No Yes , No 5190~5230 Yes , No Yes , No Yes , No Yes , No 5270~5310 Yes , No Yes , No Yes , No Yes , No 5510~5670 Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network. (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes can not be modified by end user or an installer. Apply , No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled)

Advantech Co., Ltd. 2012/9/18 Dear Sir, I would like to clarify the operating frequency range and intended operating purpose for below equipment: Model Name: TREK-753; TREK-753XXXXXXXXXXXXXXXX; X= (where "X" may be any alphanumeric character , “-” or blank); TREK-753R-HWDXPAOE FCC ID: M82-TREK-753CDMA Product Name: Computer The operating frequency range of this equipment is only possible within the range of 5180~5240 & 5500~5700 & 5620~5320 & 5725~5850 MHz; however, in order to comply with the relevant FCC requirement (Part 15.407), when the 5150~5250 MHz is used for this equipment, this equipment should only installed in the outdoor, and this information will be described on the user manual. Name/Title: Lily Huang / Supervisor Company Name: Advantech Co., Ltd. Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. TEL: 886-2-2792-7818#1412 FAX: 886-2-2794-7334 Email: [email protected]

2012/6/7 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Compliance Certification Services Inc. Address: No. 11, Wugong 6 th Rd., Wugu Towership, Taipei County 24891, Taiwan Mr. Jason Lin Job Title: Section Manager Email: [email protected] I am therefore responsible for the contents of the application. Brand Name and Model Name of the specified radio equipment: Advantech / TREK-753R-HWDXPAOE ; TREK-753XXXXXXXXXXXXXXXX; X= (where "X" may be any alphanumeric character , - or blank) FCC ID: M82-TREK-753CDMA Product Name: Computer

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 2.0 2206 Ringwood Avenue San Jose, CA 95131 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Revision History Reason for Amendment (current / obsolete) From To Approved Date Initial Release (current) 1.0 1.0 Nov-14-2006 Revised wording (current) 1.0 2.0 Sept–25-2007 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 2.0 (Client’s Company Letterhead/log) (Current Date) To: SIEMIC, INC. 2206 Ringwood Avenue, San Jose, CA 95131 USA Dear Sir/Madam, Re: Project and Product Certification Representative Authorization Letter We, ___ U__ ___U___hereby authorize SIEMIC, INC. to act as a Certification Body for certifying for the following project(s): (Product description, model name) We affirm that between SIEMIC and _ U__ ___U_, any difference in understanding, including test plan, measurement methods, applicable standards and relevant procedures and processes have been resolved prior to commencement of testing activities. Sincerely,

Advantech Co., Ltd. 2012/6/7 Federal Communications Commission Authorization and Evaluation Division FCC ID：M82-TREK-753CDMA Confidentiality Request Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, the applicant hereby requests confidential treatment of information applied this application as outlined below: 1. Block Diagram 2. Circuit Diagram 3. Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457, disclosure of this Application and all accompanying documentation will not be made before the date of the Grant for this application Sincerely,

Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 1 Total Page: 15 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 2 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 3 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 4 WLAN Antenna

Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 5 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 6 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 7 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 8 WLAN Module Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 9 WLAN Module Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 10 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 11 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 12 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 13 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 14 Compliance Certification Services Inc. Report No.: T110928101 Date of Issue: February 2, 2012 A1 - 15

Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 244 Rev. 00 APPENDIX I RADIO FREQUENCY EXPOSURE LIMIT According to §15.407(f), U-NII devices are subject to the radio frequency radiation exposure requirements specified in §§ 1.1307(b), 2.1091 and 2.1093 of this chapter, as appropriate. All equipment shall be considered to operate in a "general population/uncontrolled" environment. Applications for equipment authorization of devices operating under this section must contain a statement confirming compliance with these requirements for both fundamental emissions and unwanted emissions. Technical information showing the basis for this statement must be submitted to the Commission upon request. EUT Specification EUT Computer Frequency band (Operating) WLAN: 2412 MHz ~ 2462 MHz WLAN: 5150 MHz ~ 5350 MHz WLAN: 5500 MHz ~ 5700 MHz WLAN: 5725 MHz ~ 5850 MHz Device category Portable (<20cm separation) Mobile (>20cm separation) Others: ___________________ Exposure classification General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Max. output power Mode Frequency Range (MHz) Output Power (dBm) Output Power (mW) IEEE 802.11a 5180 – 5240 8.62 7.2778 IEEE 802.11n HT 20 MHz 5180 – 5240 9.86 9.6828 UNII Band I IEEE 802.11n HT 40 MHz 5190 ~ 5230 11.74 14.9279 IEEE 802.11a 5260 - 5320 13.11 20.4644 IEEE 802.11n HT 20 MHz 5260 - 5320 16.21 41.7830 UNII Band II IEEE 802.11n HT 40 MHz 5270 - 5310 14.94 31.1889 IEEE 802.11a 5500 - 5700 12.31 17.0216 IEEE 802.11n HT 20 MHz 5500 – 5700 16.49 44.5656 UNII Band III IEEE 802.11n HT 40 MHz 5510 - 5670 19.27 84.5279 Antenna gain (Max) Antenna Gain: IEEE 802.11a: 1.98 dBi (Numeric gain: 1.57) MIMO: 10*log(((10^(1.98 dBi/20)+10^(1.98 dBi/20))^2)/2)=4.99 dBi (Numeric gain: 3.15) Evaluation applied MPE Evaluation* SAR Evaluation N/A Remark: 1. The maximum output power is 19.27dBm (84.5279mW) at 5670MHz (with 3.15 numeric antenna gain.) 2. For mobile or fixed location transmitters, no SAR consideration applied. The maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger. TEST RESULTS No non-compliance noted. Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 245 Rev. 00 Calculation Given d GP E ×× = 30 & 3770 2 E S = Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in milliwatts / square centimeter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 3770 30 d GP S ×× = Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields () () 2 2 0796.0 100/3770 1000/30 d GP d GP S × ×= × ×× = Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm2 Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: Yields GPS××=000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 246 Rev. 00 UNII Band I IEEE 802.11a mode: EUT output power = 7.2778 mW Numeric Antenna gain = 1.57 Æ Power density = 0. 022738mW / cm2 IEEE 802.11n HT 20 MHz mode: EUT output power = 9.6828 mW Numeric Antenna gain = 3.15 Æ Power density = 0. 006070mW / cm2 IEEE 802.11n HT 40 MHz mode: EUT output power = 14.9279mW Numeric Antenna gain = 3.15 Æ Power density = 0. 009358mW / cm2 UNII Band II IEEE 802.11a mode: EUT output power = 20.4644 mW Numeric Antenna gain = 1.57 Æ Power density = 0. 063937mW / cm2 IEEE 802.11n HT 20 MHz mode: EUT output power = 41.783 mW Numeric Antenna gain = 3.15 Æ Power density = 0. 026192mW / cm2 IEEE 802.11n HT 40 MHz mode: EUT output power = 31.1889 mW Numeric Antenna gain = 3.15 Æ Power density = 0. 019551mW / cm2 Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 247 Rev. 00 UNII Band III IEEE 802.11a mode: EUT output power = 17.0216 mW Numeric Antenna gain = 1.57 Æ Power density = 0. 053181mW / cm2 IEEE 802.11n HT 20 MHz mode: EUT output power = 44.5656 mW Numeric Antenna gain = 3.15 Æ Power density = 0.027936 mW / cm2 IEEE 802.11n HT 40 MHz mode: EUT output power = 84.5279 mW Numeric Antenna gain = 3.15 Æ Power density = 0.052986mW / cm2 (For mobile or fixed location transmitters, the maximum power density is 1.0 mW/cm 2 even if the calculation indicates that the power density would be larger.)

Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 227 Rev. 00 FCC 47 CFR PART 15 SUBPART E TEST REPORT For Computer Model: TREK-753, TREK-753R-HWDXPAOE, TREK-753XXXXXXXXXXXXXXXX; X= (where "X" may be any alphanumeric character , “-” or blank) Trade Name: Advantech Issued to Advantech Co., Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wu-Gong 6th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: February 2, 2012 Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 February 2, 2012 Initial Issue ALL Eunice Shen Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 3 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION............................................................................................. 4 2. EUT DESCRIPTION .................................................................................................................... 5 3. TEST METHODOLOGY ............................................................................................................. 7 3.1 EUT CONFIGURATION.............................................................................................................. 7 3.2 EUT EXERCISE......................................................................................................................... 7 3.3 GENERAL TEST PROCEDURES.................................................................................................. 7 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS .............................................. 8 3.5 DESCRIPTION OF TEST MODES................................................................................................. 9 4. INSTRUMENT CALIBRATION............................................................................................... 10 4.1 MEASURING INSTRUMENT CALIBRATION......................................................................... 10 4.2 MEASUREMENT EQUIPMENT USED ............................................................................ 10 4.3 MEASUREMENT UNCERTAINTY .................................................................................. 11 5. FACILITIES AND ACCREDITATIONS ................................................................................. 12 5.1 FACILITIES............................................................................................................................ 12 5.2 EQUIPMENT........................................................................................................................... 12 5.3 TABLE OF ACCREDITATIONS AND LISTINGS.......................................................................... 13 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................ 14 6.1 SETUP CONFIGURATION OF EUT............................................................................................ 14 6.2 SUPPORT EQUIPMENT............................................................................................................ 14 7. FCC PART 15 REQUIREMENTS............................................................................................. 15 7.1 D UTY CYCLE......................................................................................................................... 15 7.2 26 DB EMISSION BANDWIDTH............................................................................................... 17 7.3 MAXIMUM CONDUCTED OUTPUT POWER.............................................................................. 42 7.4 BAND EDGES MEASUREMENT...................................................................................... 71 7.5 PEAK POWER SPECTRAL DENSITY......................................................................................... 85 7.6 PEAK EXCURSION................................................................................................................ 110 7.7 RADIATED UNDESIRABLE EMISSION.................................................................................... 135 7.8 POWERLINE CONDUCTED EMISSIONS.................................................................................. 165 7.9 FREQUENCY STABILITY....................................................................................................... 166 7.10 DYNAMIC FREQUENCY SELECTION.......................................................................... 185 APPENDIX I RADIO FREQUENCY EXPOSURE ..................................................................... 220 APPENDIX 2 PHOTOGRAPHS OF TEST SETUP..................................................................... 224 APPENDIX 1 - PHOTOGRAPHS OF EUT Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 4 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: Advantech Co., Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Equipment Under Test: Computer Tr a d e N a m e : Advantech Model: TREK-753, TREK-753R-HWDXPAOE, TREK-753XXXXXXXXXXXXXXXX; X= (where "X" may be any alphanumeric character , “-” or blank) Date of Test: December 30, 2011 ~ January 10, 2012 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart E No non-compliance noted We hereby certify that: Compliance Certification Services Inc. tested the above equipment. The test data, data evaluation, test procedures, and e…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 224 Rev. 00 APPENDIX 2 PHOTOGRAPHS OF TEST SETUP Conducted Emission Set Up Photo Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 225 Rev. 00 Below 1GHz RADIATED EMISSION SETUP PHOTOS Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 226 Rev. 00 Above 1GHz RADIATED EMISSION SETUP PHOTOS Compliance Certification Services Inc. FCC ID: M82-TREK-753CDMA Report No.: T110928101-RP2 Page 227 Rev. 00 Dynamic Frequency Selection Set Up Photo