M82-UTX-3115COMPUTER

User Manual UTX-3115 UTX-3115 User Manualii Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe- ments of the rights of third parties, which may result from its use. Acknowledgements Intel and Pentium are trademarks of Intel Corporation. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Declaration of Conformity FCC Class B Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful inter- ference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Part No. XXXXXXXXXXEdition 1 Printed in TaiwanSeptember 2014 Warning!Any changes or modifications made to the equipment which are not expressly approved by the relevant standards authority could void your authority to operate the equipment. Caution!Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dis- pose of used batteries according to the manufacturer’s instructions. iiiUTX-3115 User Manual Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B dig- ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. FOR MOBILE DEVICE USAGE (>20cm/low power) Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncon- trolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. FOR COUNTRY CODE SELECTION USAGE (WLAN DEVICES) Note: The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. UTX-3115 User Manualiv Technical Support and Assistance 1.Visit the Advantech website at http://support.advantech.com where you can find the latest information about the product. 2.Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –Product name and serial number –Description of your peripheral attachments –Description of your software (operating system, version, application software, etc.) –A complete description of the problem –The exact wording of any error messages Safety Instructions 1.Read these safety instructions carefully. 2.Keep this User Manual for later reference. 3.Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4.For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible. 5.Keep this equipment away from humidity. 6.Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage. 7.The openings on the enclosure are for a…

Text truncated - open the document above for the full version.

Intel Mobile Communications SAS 505 route des Lucioles 06905 Sophia Antipolis France June 11, 2014 Advantech No.1, Alley 20, Lane 26, Rueiguang Rd. Neihu District Taipei 114, Taiwan RE: Model UTX-3115, Authorization to Utilize Intel 7260HMW Test Reports To: Lily Huang, [email protected] With this letter Intel Mobile Communications authorizes Advantech to utilize the antenna port conducted test report data concerning Model 7260HMW Radio Module embedded in the Advantech system bearing the unique model UTX-3115, and only in this model. The 802.11a/b/g/n/ac WLAN HMC form factor radio is 100% identical to the already FCC and Industry Canada approved Intel Mobile Communications model number 7260HMW FCC ID: PD97260H and IC: 1000M-7260H, originally issued on 4/04/2013. Any alteration to the Intel Mobile Communications model 7260HMW will void this authorization and the ability of Advantech to use the antenna port conducted report data from the original FCC and Industry Canada Radio Approvals obtained by Intel Mobile Communications. Reference antenna used during Intel’s original approval : Antenna Type Model Part Number Antenna Location (Main/Aux) 2.4GHz Peak Gain in dBi* 5.2GHz Peak Gain in dBi* 5.5GHz Peak Gain in dBi* 5.7GHz Peak Gain in dBi* PIFAMain PIFAAux PIFAMIMO *All Antenna gains include cable loss Universe Technology Antenna (Intel Reference Antenna) 3.243.734.774.97 Intel Mobile Communications provides this authorization as a service to Advantech. Advantech agrees that ultimately it is their responsibility to conduct all testing and obtain all appropriate regulatory approvals for their system. Sincerely, June 11, 2014 _____________________________ ____________________ Steven C. Hackett Date Product Regulations Engineer WPRD Regulatory Engineering [email protected]

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2 Page 3 Page 4

              !" #$ !" 
   
 $ 
  

  !"#$%
&' ()&'

 *+
,- ./01234516378

 !"9:;<=>?8

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

Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15

Report No.: SA140707C54A 1 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 RF EXPOSURE REPORT REPORT NO.: SA140707C54A MODEL NO.: UTX-3115XXXXXXXXXXXXXXXX, UTX3115XXXXXXXXXXXXXXXX (“X” can be 0-9 or A-Z or blank or any alphanumeric character) FCC ID: M82-UTX-3115 RECEIVED: Jun. 18, 2014 ISSUED: Jul. 29, 2014 APPLICANT: ADVANTECH CO., LTD ADDRESS: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-com pliance to the specification. Report No.: SA140707C54A 2 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 TABLE OF CONTENTS RELEASE CONTROL RECORD ................................................................................................ 3 1. CERTIFICATION ............................................................................................................. 4 2. RF EXPOSURE ............................................................................................................... 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ......................................... 5 2.2 MPE CALCULATION FORMULA .................................................................................... 5 2.3 CLASSIFICATION ........................................................................................................... 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER .................................. 6 Report No.: SA140707C54A 3 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA140707C54A Original release. Jul. 29, 2014 Report No.: SA140707C54A 4 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 1. CERTIFICATION PRODUCT: COMPUTER MODEL: UTX-3115XXXXXXXXXXXXXXXX, UTX3115XXXXXXXXXXXXXXXX (“X” can be 0-9 or A-Z or blank or any alphanumeric character) BRAND: Advantech APPLICANT: ADVANTECH CO., LTD TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 2 (Section 2.1091) KDB 447498 D03 IEEE C95.1 The above equipment (Model: UTX-3115) has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Jul. 29, 2014 Celine Chou / Specialist APPROVED BY : , DATE : Jul. 29, 2014 Ken Liu / Senior Manager Report No.: SA140707C54A 5 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA140707C54A 6 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER FREQUENCY BAND (MHz) MODULATION MODE MAX POWER (dBm) CHAIN ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 2412-2462 802.11b 19.17 0 2.98 20 0.033 1 17.84 1 2.98 20 0.024 1 802.11g 25.66 0 2.98 20 0.145 1 24.59 1 2.98 20 0.114 1 802.11n (20MHz) 26.01 0 2.98 20 0.158 1 24.83 1 2.98 20 0.120 1 25.98 0 + 1 5.99 20 0.313 1 802.11n (40MHz) 26.78 0 2.98 20 0.188 1 23.95 1 2.98 20 0.098 1 26.19 0 + 1 5.99 20 0.329 1 5180-5240 802.11a 14.91 0 1.40 20 0.009 1 15.07 1 1.40 20 0.009 1 802.11n (20MHz) 15.10 0 1.40 20 0.009 1 15.06 1 1.40 20 0.009 1 15.17 0 + 1 4.41 20 0.018 1 802.11n (40MHz) 15.65 0 1.40 20 0.010 1 15.01 1 1.40 20 0.009 1 14.94 0 + 1 4.41 20 0.017 1 802.11ac (80MHz) 6.89 0 1.40 20 0.001 1 7.79 1 1.40 20 0.002 1 8.56 0 + 1 4.41 20 0.004 1 Report No.: SA140707C54A 7 of 9 Report Format Version 5.0.1 Reference No.: 140729C04 FREQUENCY BAND (MHz) MODULATION MODE MAX POWER (dBm) CHAIN ANTENNA GAIN (dBi) DISTANCE (cm) POWER DENSITY (mW/cm 2 ) LIMIT (mW/cm 2 ) 5260-5320 802.11a 1…

Text truncated - open the document above for the full version.

Report No.: RF140707C54A-1 1 of 24 Report Format Version 5.1.0 Reference No.: 140707C54, 140729C04 DFS TEST REPORT REPORT NO.: RF140707C54A-1 MODEL NO.: UTX-3115XXXXXXXXXXXXXXXX, UTX3115XXXXXXXXXXXXXXXX (“X” can be 0-9 or A-Z or blank or any alphanumeric character) FCC ID: M82-UTX-3115 RECEIVED: Jun. 18, 2014 TESTED: Jul. 28 ~ Jul. 29, 2014 ISSUED: Jul. 31, 2014 APPLICANT: ADVANTECH CO., LTD ADDRESS: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch TEST LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C. ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140707C54A-1 2 of 24 Report Format Version 5.1.0 Reference No.: 140707C54, 140729C04 Table of Contents RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION .......................................................................................................... 4 2. EUT INFORMATION ..................................................................................................... 5 2.1 OPERATING FREQUENCY BANDS AND MODE OF EUT ......................................... 5 2.2 EUT SOFTWARE AND FIRMWARE VERSION ........................................................... 5 2.3 DESCRIPTION OF AVAILABLE ANTENNAS TO THE EUT ......................................... 5 2.4 EUT MAXIMUM CONDUCTED POWER ...................................................................... 6 2.5 EUT MAXIMUM E.I.R.P. POWER ................................................................................. 7 2.6 TRANSMIT POWER CONTROL (TPC) ........................................................................ 8 2.7 STATEMENT OF MAUNFACTURER ........................................................................... 8 3. U-NII DFS RULE REQUIREMENTS ............................................................................ 9 3.1 WORKING MODES AND REQUIRED TEST ITEMS ................................................... 9 3.2 TEST LIMITS AND RADAR SIGNAL PARAMETERS ................................................ 10 4. TEST & SUPPORT EQUIPMENT LIST ...................................................................... 12 4.1 TEST INSTRUMENTS ............................................................................................... 12 4.2 DESCRIPTION OF SUPPORT UNITS ....................................................................... 12 5. TEST PROCEDURE .................................................................................................. 13 5.1 ADT DFS MEASUREMENT SYSTEM ........................................................................ 13 5.2 CALIBRATION OF DFS DETECTION THRESHOLD LEVEL ..................................... 14 5.3 DEVIATION FROM TEST STANDARD ...................................................................... 15 5.4 RADIATED TEST SETUP CONFIGURATION ............................................................ 15 5.4.1 CLIENT WITHOUT RADAR DETECTION MODE ...................................................... 15 6. TEST RESULTS ......................................................................................................... 16 6.1 SUMMARY OF TEST RESULT .................................................................................. 16 6.2 TEST RESULTS ......................................................................................................... 17 6.2.1 TEST MODE: DEVICE OPERATING IN CLIENT WITHOUT RADAR DETECTION MODE........ ........................................................................................................................... 17 6.2.2 CHANNEL CLOSING TRANSMISSION AND CHANNEL MOVE TIME...................... 18 6.2.3 NON-OCCUPANCY PERIOD ..................................................................................... 21 6.2.4 NON-ASSOCIATED TEST ......................................................................................... 23 6.2.5 NON- CO-CHANNEL TEST ........................................................................................ 23 7. TESTING LABORATORIES INFORMATION ............................................................. 24 Report No.: RF140707C54A-1 3 of 24 Report Format Version 5.1.0 Reference No.: 140707C54, 140729C04 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140707C54A-1 Original release Jul. 31, 2014 Report No.: RF140707C54A-1 4 of 24 Report Form…

Text truncated - open the document above for the full version.

Report No.: RF140707C54-4 1 of 30 Report Format Version 5.0.0 PARTIAL FCC TEST REPORT (15.247_BLUETOOTH) REPORT NO.: RF140707C54-4 MODEL NO.: UTX-3115XXXXXXXXXXXXXXXX, UTX3115XXXXXXXXXXXXXXXX (“X” can be 0-9 or A-Z or blank or any alphanumeric character) FCC ID: M82-UTX-3115 RECEIVED: Jun. 18, 2014 TESTED: Jul. 16 ~ Jul. 25, 2014 ISSUED: Jul. 29, 2014 APPLICANT: ADVANTECH CO., LTD ADDRESS: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the com pliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF140707C54-4 2 of 30 Report Format Version 5.0.0 Table of Contents RELEASE CONTROL RECORD .............................................................................................. 3 1. CERTIFICATION ........................................................................................................... 4 2. SUMMARY OF TEST RESULTS .................................................................................. 5 2.1 MEASUREMENT UNCERTAINTY ................................................................................ 5 3. GENERAL INFORMATION ........................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT ............................................................................. 6 3.2 DESCRIPTION OF TEST MODES ............................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................... 8 3.3 DESCRIPTION OF SUPPORT UNITS ....................................................................... 10 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 10 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................ 11 4. TEST TYPES AND RESULTS .................................................................................... 12 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ..................................... 12 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................. 12 4.1.2 TEST INSTRUMENTS ................................................................................................ 13 4.1.3 TEST PROCEDURES ................................................................................................ 14 4.1.4 DEVIATION FROM TEST STANDARD ...................................................................... 14 4.1.5 TEST SETUP .............................................................................................................. 15 4.1.6 EUT OPERATING CONDITIONS ............................................................................... 15 4.1.7 TEST RESULTS ......................................................................................................... 16 4.2 CONDUCTED EMISSION MEASUREMENT ............................................................. 23 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ........................................... 23 4.2.2 TEST INSTRUMENTS ................................................................................................ 23 4.2.3 TEST PROCEDURES ................................................................................................ 24 4.2.4 DEVIATION FROM TEST STANDARD ...................................................................... 24 4.2.5 TEST SETUP .............................................................................................................. 25 4.2.6 EUT OPERATING CONDITIONS ............................................................................... 25 4.2.7 TEST RESULTS ......................................................................................................... 26 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ................................................. 28 6. INFORMATION ON THE TESTING LABORATORIES ............................................... 29 7. APPENDIX A – MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ......................................................................................... 30 Report No.: RF140707C54-4 3 of 30 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF140707C54-4 Original release. Jul. 29, 2014 Report No.: RF140707C54-4 4 of 30 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT:COMPUTER …

Text truncated - open the document above for the full version.

Report No.: RF140707C54-5 1 of 25 Report Format Version 5.1.0 PARTIAL FCC TEST REPORT (15.247_BLUETOOTH LE) REPORT NO.: RF140707C54-5 MODEL NO.: UTX-3115XXXXXXXXXXXXXXXX, UTX3115XXXXXXXXXXXXXXXX (“X” can be 0-9 or A-Z or blank or any alphanumeric character) FCC ID: M82-UTX-3115 RECEIVED: Jun. 18, 2014 TESTED: Jul. 16 ~ Jul. 25, 2014 ISSUED: Jul. 29, 2014 APPLICANT: ADVANTECH CO., LTD ADDRESS: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the …

Text truncated - open the document above for the full version.