M82-WISE2410WISE-2410B LoRa board

User Manual WISE-2410 LoRaWAN Smart Condition Monitoring Sensor WISE-2410 User Manualii Copyright The documentation and the software included with this product are copyrighted 2020 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. also reserves the right to improve the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. The information provided in this manual is intended to be accurate and reliable. However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringements of the rights of third parties that may result from its use. Acknowledgements Intel and Pentium are trademarks of Intel Corporation. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Product Warranty (2 years) Advantech warrants the original purchaser that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products that have been repaired or altered by persons other than repair personnel authorized by Advantech, or products that have been subject to misuse, abuse, accident, or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced free of charge during the warranty period. For out-of- warranty repairs, customers are billed according to the cost of replacement materials, service time, and freight. Please consult your dealer for more details. If you believe your product is defective, follow the steps outlined below. 1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages displayed when the prob- lem occurs. 2.Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3.If your product is diagnosed as defective, obtain a return merchandize authori- zation (RMA) number from your dealer. This allows us to process your return more quickly. 4.Carefully pack the defective product, a completed Repair and Replacement Order Card, and proof of the purchase date (such as a photocopy of your sales receipt) into a shippable container. Products returned without a proof of pur- chase date are not eligible for warranty service. 5.Write the RMA number clearly on the outside of the package and ship the pack- age prepaid to your dealer. Part No. 2003240000Edition 1 Printed in TaiwanFebruary 2020 WISE-2410 User Manualiv Warnings, Cautions, and Notes Document Feedback To assist us with improving this manual, we welcome all comments and constructive criticism. Please send all feedback in writing to [email protected]. Packing List Before setting up the system, check that the items listed below are included and in good condition. If any item does not accord with the table, please contact your dealer immediately. WISE-2410 1 x WISE-2410 module 1 x Mounting stud (1/4-28 UNF x 9.4Lmm) 1 x Quick start manual * 2 pcs AA 3.6VDC batteries should be ordered respectively. * Built-in Antenna. Warning!Warnings indicate conditions that if not observed may cause personal injury! Caution!Cautions are included to help prevent hardware damage or data losses. For example, “Batteries are at risk of exploding if incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type as recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.” Note!Notes provide additional optional information. vWISE-2410 User Manual Safety Instructions 1.Read these safety instructions carefully. 2.Retain this user manual for future reference. 3.For pluggable equipment, the power outlet socket must be located near the equipment and easily accessible. 4.Place the equipment on a reliable surface during installation. Dropping or letting the equipment fall may cause damage. 5.Ensure that the voltage of the power source is correct before connecting the equipment to a power outlet. 6.All cautions and warnings on the equipment should be noted. 7.If the equipment is not used for a long time, disconnect it from the power source to avoid damage from transient overvoltage. 8.Never pour liquid into an opening. This may cause fire or electrical shock. 9.Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. 10.If one of the following occurs, have the equipment checked by qualified service personnel: The USB port is damaged. Liquid has penetrated the equipment. The equipment has been exposed to moisture. The equipment is malfunctioning, or does not operate according to the user manual. The equipment has been dropped and damaged. The equipment shows obvious signs of breakage. 11.Do not leave the equipment in an environment with a storage temperature of below -20 °C (-4 °F) or above 85 °C (185 °F) USB powered/50 °C (122 °F) 12.Battery powered as this may cause damage. The equipment should be kept in a controlled environment. 13.CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only with the same or equivalent type as recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions. 14.According to IEC 704-1:1982 standards, the sound pressure level at the opera- tor's position does not exceed 70 dB (A). DISCLAIMER: These instructions are provided in accordance with IEC 704…

Text truncated - open the document above for the full version.

Manual WISE-2410B LoRaWAN Module Operating temperature Storage temperature Operating humidity Storage humidity 980 1.2 Configuration Interface: USB virtual COM port Connector: Micro-B USB USB chipset: Silicon Labs CP210x Driver: CP210x USB to UART Bridge VCP Drivers (https://www.silabs.com/products/development-tools/software/usb-to-uart-bridge- vcp-drivers)

Reference No.: 190520C05 Page No. 1 / 8 CONSTRUCTION PHOTOS OF EUT Brand: Advantech, Model: WISE-2410B Reference No.: 190520C05 Page No. 2 / 8 Ant Reference No.: 190520C05 Page No. 3 / 8 Reference No.: 190520C05 Page No. 4 / 8 End-product (Brand: Advantech, Model: WISE-2410) Reference No.: 190520C05 Page No. 5 / 8 Reference No.: 190520C05 Page No. 6 / 8 Reference No.: 190520C05 Page No. 7 / 8 Reference No.: 190520C05 Page No. 8 / 8

CARTONG Report of prepress CAR TONG CO.,LTD Customer : P/N Size Category Material Color Remarks Date Participant Tolerance + - Label Manual Box + - 0.2mm + - 2mm + - 5mm + - 2mm AB/F + - 4mm A/F + - 3mm B/F + - 2mm E/F + - 2mm F/F Folding Carton Reference SW-1449 15.00 x 8.00 mm Kdie maggie 2020/2/14 16:44:50 SWSW label CARTONG Report of prepress Drawing: CAR TONG CO.,LTD 0.5r 8 15 1515 FCC label will be pasted in the back side of module as below location in red.

CARTONG Report of prepress CAR TONG CO.,LTD Customer : P/N Size Category Material Color Remarks Date Participant Tolerance + - Label Manual Box + - 0.2mm + - 2mm + - 5mm + - 2mm AB/F + - 4mm A/F + - 3mm B/F + - 2mm E/F + - 2mm F/F Folding Carton Reference SW-1425 36.19 x 18.47 mm 430C 158C 432C die maggie 2019/12/13 11:24:40 SWSW label CARTONG Report of prepress Drawing: CAR TONG CO.,LTD

Reference No.: 190520C05-2 Page No. 1 / 1 CONSTRUCTION PHOTOS OF EUT

Report No.: SA190520C05 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA190520C05 FCC ID: M82-WISE2410 Test Model: WISE-2410B Series Model: WISE-2410Bxxxxxxxxxxxx (where “X” may be any alphanumeric character or blank or “-“) Received Date: Jul. 31, 2019 Test Date: Dec. 29, 2019 ~ Feb. 05, 2020 Issued Date: Feb. 05, 2020 Applicant: ADVANTECH CO., LTD Address: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth ourfindings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190520C05 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result of Maximum Conducted Power ........................................................................... 5 Report No.: SA190520C05 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA190520C05 Original release Feb. 05, 2020 Report No.: SA190520C05 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: WISE-2410B LoRa board Brand: Advantech Test Model: WISE-2410B Series Model: WISE-2410Bxxxxxxxxxxxx (where “X” may be any alphanumeric character or blank or “-“) Sample Status: Engineering sample Applicant: ADVANTECH CO., LTD Test Date: Dec. 29, 2019 ~ Feb. 05, 2020 Standards: FCC Part 2 (Section 2.1091) References Test Guidance: IEEE C95.3 -2002 KDB 447498 D01 General RF Exposure Guidance v06 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Feb. 05, 2020 Celine Chou / Senior Specialist Approved by : , Date:Feb. 05, 2020 Bruce Chen / Senior Project Engineer Report No.: SA190520C05 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale pi = 3.1416 r = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result of Maximum Conducted Power Max Tune-up Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 20.00 1.00 20 0.025 0.601 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. ---END---

Report No.: RF190520C05 Page No. 1 / 46 Report Format Version: 6.1.1 FCC Test Report Report No.: RF190520C05 FCC ID: M82-WISE2410 Test Model: WISE-2410B Series Model: WISE-2410Bxxxxxxxxxxxx (where “X” may be any alphanumeric character or blank or “-“) Received Date: Jul. 31, 2019 Test Date: Dec. 29, 2019 ~ Feb. 05, 2020 Issued Date: Feb. 05, 2020 Applicant: ADVANTECH CO., LTD Address: No. 1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, Taiwan FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190520C05 Page No. 2 / 46 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty Cycle of Test Signal .................................................................................................................. 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards and references ................................................................ 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 32 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 32 4.2.2 Test Instruments ................................................................................................................................ 32 4.2.3 Test Procedures ............................................…

Text truncated - open the document above for the full version.

Reference No.: 190520C05 Page No. 1 / 4 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Reference No.: 190520C05 Page No. 2 / 4 Radiated Emission Test (Above 1GHz) Reference No.: 190520C05 Page No. 3 / 4 Radiated Emission Test (Below 1GHz) Reference No.: 190520C05 Page No. 4 / 4