M82-WISE2834Intelligent RFID Gateway

User Manual WISE-2834 Intelligent RFID Gateway WISE-2834 User Manualii Copyright The documentation and the software included with this product are copyrighted 2020 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe- ments of the rights of third parties, which may result from its use. Acknowledgements IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Cor- poration. Intel®, Core™ and Atom™ are the trademarks of Intel Corporation Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Support For more information on this and other Advantech products, please visit our websites at: http://www.advantech.com For technical support and service, please visit our support website at: http://support.advantech.com/ Part No. 2003283400Edition 1 Printed in TaiwanMarch 2020 iiiWISE-2834 User Manual Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details. If you think you have a defective product, follow these steps: 1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs. 2.Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3.If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly. 4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service. 5.Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. Declaration of Conformity CE This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information. FCC Class A Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Opera- tion of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WISE-2834 User Manualiv FCC Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B dig- ital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pro- vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interfer- ence to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence to radio or television reception, which can be determined by turning the equip- ment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FOR MOBILE DEVICE USAGE (>20cm/low power eg. AP routers) Rad…

Text truncated - open the document above for the full version.

Reference No.: 190516C11-1 Page No. 1 / 8 CONSTRUCTION PHOTOS OF EUT Reference No.: 190516C11-1 Page No. 2 / 8 Reference No.: 190516C11-1 Page No. 3 / 8 Reference No.: 190516C11-1 Page No. 4 / 8 Adapter (Support unit) Reference No.: 190516C11-1 Page No. 5 / 8 Reference No.: 190516C11-1 Page No. 6 / 8 Reference No.: 190516C11-1 Page No. 7 / 8 Reference No.: 190516C11-1 Page No. 8 / 8

CARTONG Report of prepress CAR TONG CO.,LTD Customer : P/N Size Category Material Color Remarks Date Participant Tolerance + - Label Manual Box + - 0.2mm + - 2mm + - 5mm + - 2mm AB/F + - 4mm A/F + - 3mm B/F + - 2mm E/F + - 2mm F/F Folding Carton Reference SW-1405 70.00 x 50.00 mm Kdie maggie 2019/12/9 16:24:10 SWSW label CARTONG Report of prepress Drawing: CAR TONG CO.,LTD 1.5r 70 50

Reference No.: 190516C11-2 Page No. 1 / 11 CONSTRUCTION PHOTOS OF EUT Reference No.: 190516C11-2 Page No. 2 / 11 Reference No.: 190516C11-2 Page No. 3 / 11 Reference No.: 190516C11-2 Page No. 4 / 11 Reference No.: 190516C11-2 Page No. 5 / 11 Reference No.: 190516C11-2 Page No. 6 / 11 Reference No.: 190516C11-2 Page No. 7 / 11 Reference No.: 190516C11-2 Page No. 8 / 11 Reference No.: 190516C11-2 Page No. 9 / 11 Reference No.: 190516C11-2 Page No. 10 / 11 Reference No.: 190516C11-2 Page No. 11 / 11

Report No.: SA190516C11 Page No. 1 / 5 Report Format Version: 6.1.1 RF Exposure Report Report No.: SA190516C11 FCC ID: M82-WISE2834 Test Model: WISE-2834 Series Model: WISE-2834-EA, WISE-2834-CA (refer to item 3.1 for more details) Received Date: May 16, 2019 Test Date: May 25 ~ Jul. 13, 2019 Issued Date: Jul. 18, 2019 Applicant: ADVANTECH CO., LTD Address: No.1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA190516C11 Page No. 2 / 5 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 RF Exposure .......................................................................................................................................... 5 2.1 Limits for Maximum Permissible Exposure (MPE) .............................................................................. 5 2.2 MPE Calculation Formula ................................................................................................................... 5 2.3 Classification ....................................................................................................................................... 5 3 Calculation Result Of Maximum Conducted Power .......................................................................... 5 Report No.: SA190516C11 Page No. 3 / 5 Report Format Version: 6.1.1 Release Control Record Issue No. Description Date Issued SA190516C11 Original release. Jul. 18, 2019 Report No.: SA190516C11 Page No. 4 / 5 Report Format Version: 6.1.1 1 Certificate of Conformity Product: Intelligent RFID Gateway Brand: Advantech Test Model: WISE-2834 Series Model: WISE-2834-EA, WISE-2834-CA Sample Status: Engineering sample Applicant: ADVANTECH CO., LTD Test Date: May 25 ~ Jul. 13, 2019 Standards: FCC Part 2 (Section 2.1091) KDB 447498 D01 General RF Exposure Guidance v06 IEEE C95.3 -2002 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s RF characteristics under the conditions specified in this report. Prepared by : , Date:Jul. 18, 2019 Polly Chien / Specialist Approved by : , Date:Jul. 18, 2019 Bruce Chen / Senior Project Engineer Report No.: SA190516C11 Page No. 5 / 5 Report Format Version: 6.1.1 2 RF Exposure 2.1 Limits for Maximum Permissible Exposure (MPE) Frequency Range (MHz) Electric Field Strength (V/m) Magnetic Field Strength (A/m) Power Density (mW/cm 2 ) Average Time (minutes) Limits For General Population / Uncontrolled Exposure 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE Calculation Formula Pd = (Pout*G) / (4*pi*r 2 ) where Pd = power density in mW/cm 2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 Classification The antenna of this product, under normal use condition, is at least 23cm away from the body of the user. So, this device is classified as Mobile Device. 3 Calculation Result Of Maximum Conducted Power Frequency Band (MHz) Max Power (dBm) Antenna Gain (dBi) Distance (cm) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) Test Mode A (75kbps) 920.75~ 927.25 27.92 8 23 0.588 0.614 Test Mode B (400kbps) 920.75~ 927.25 27.67 8 23 0.555 0.614 Note: Determining compliance based on the results of the compliance measurement, not taking into account measurement instrumentation uncertainty. ---END---

Report No.: RF190516C11 Page No. 1 / 63 Report Format Version: 6.1.1 FCC Test Report Report No.: RF190516C11 FCC ID: M82-WISE2834 Test Model: WISE-2834 Series Model: WISE-2834-EA, WISE-2834-CA (refer to item 3.1 for more details) Received Date: May 16, 2019 Test Date: May 25 ~ Jul. 13, 2019 Issued Date: Jul. 18, 2019 Applicant: ADVANTECH CO., LTD Address: No.1, Alley 20, Lane 26, Rueiguang Rd, Neihu District, Taipei, Taiwan 114 Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lin Kou Laboratories Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan Test Location: No. 19, Hwa Ya 2nd Rd., Wen Hwa Vil., Kwei Shan Dist., Taoyuan City 33383, TAIWAN FCC Registration / Designation Number: 788550 / TW0003 This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF190516C11 Page No. 2 / 63 Report Format Version: 6.1.1 Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Description of Support Units ............................................................................................................. 10 3.3.1 Configuration of System under Test .................................................................................................. 10 3.4 General Description of Applied Standards and References .............................................................. 11 4 Test Types and Results ...................................................................................................................... 12 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 12 4.1.2 Test Instruments ................................................................................................................................ 13 4.1.3 Test Procedures ................................................................................................................................. 14 4.1.4 Deviation from Test Standard ............................................................................................................ 14 4.1.5 Test Setup .......................................................................................................................................... 15 4.1.6 EUT Operating Conditions ................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 Conducted Emission Measurement .................................................................................................. 41 4.2.1 Limits of Conducted Emission Measurement .................................................................................... 41 4.2.2 Test Instruments ................................................................................................................................ 41 4.2.3 Test Procedures ................................................................................................................................. 42 4.2.4 Deviation from Test Standard ..............................................................…

Text truncated - open the document above for the full version.

Reference No.: 190516C11 Page No. 1 / 5 PHOTOGRAPHS OF THE TEST CONFIGURATION Conducted Emission Test Mode B Reference No.: 190516C11 Page No. 2 / 5 Conducted Emission Test Mode C Reference No.: 190516C11 Page No. 3 / 5 Radiated Emission Test (Above 1GHz) Mode A, B Reference No.: 190516C11 Page No. 4 / 5 Radiated Emission Test (Below 1GHz) Mode B Reference No.: 190516C11 Page No. 5 / 5 Radiated Emission Test (Below 1GHz) Mode C