M82-WISE4000IoT Wireless I/O Module

User Manual WISE-4000 Series IoT Ethernet I/O Module WISE-4000 User Manualii Copyright The documentation and the software included with this product are copyrighted 2015 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd. assumes no responsibility for its use, nor for any infringe- ments of the rights of third parties, which may result from its use. Acknowledgements Intel and Pentium are trademarks of Intel Corporation. Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp. All other product names or trademarks are properties of their respective owners. Product Warranty Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of pur- chase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation. Advantech assumes no liability under the terms of this warranty as a consequence of such events. Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight. Please consult your dealer for more details. If you think you have a defective product, follow these steps: 1.Collect all the information about the problem encountered. (For example, CPU speed, Advantech products used, other hardware and software used, etc.) Note anything abnormal and list any onscreen messages you get when the problem occurs. 2.Call your dealer and describe the problem. Please have your manual, product, and any helpful information readily available. 3.If your product is diagnosed as defective, obtain an RMA (return merchandize authorization) number from your dealer. This allows us to process your return more quickly. 4.Carefully pack the defective product, a fully-completed Repair and Replacement Order Card and a photocopy proof of purchase date (such as your sales receipt) in a shippable container. A product returned without proof of the purchase date is not eligible for warranty service. 5.Write the RMA number visibly on the outside of the package and ship it prepaid to your dealer. Part No. 2003D40001Edition 2 Printed in TaiwanJuly 2015 iiiWISE-4000 User Manual Declaration of Conformity CE This product has passed the CE test for environmental specifications. We recom- mend the use of shielded cables. . Technical Support and Assistance 1.Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. 2.Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. Please have the following information ready before you call: –Product name and serial number –Description of your peripheral attachments –Description of your software (operating system, version, application software, etc.) –A complete description of the problem –The exact wording of any error messages Safety Instructions 1.Read these safety instructions carefully. 2.Keep this User Manual for later reference. WISE-4000 User Manualiv 3.Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4.For plug-in equipment, the power outlet socket must be located near the equip- ment and must be easily accessible. 5.Keep this equipment away from humidity. 6.Put this equipment on a reliable surface during installation. Dropping it or letting it fall may cause damage. 7.The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS. 8.Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. 9.Position the power cord so that people cannot step on it. Do not place anything over the power cord. 10.All cautions and warnings on the equipment should be noted. 11.If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient overvoltage. 12.Never pour any liquid into an opening. This may cause fire or electrical shock. 13.Never open the equipment. For safety reasons, the equipment should be opened only by qualified service personnel. 14.If one of the following situations arises, get the equipment checked by service personnel: –The power cord or plug is damaged. –Liquid has penetrated into the equipment. –The equipment has been exposed to moisture. –The equipment does not work well, or you cannot get it to work according to the user's manual. –The equipment has been dropped and damaged. –The equipment has obvious signs of breakage. 15.DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT WHERE THE STORAGE TEMPERATURE MAY GO BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. 16.CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER, DISCARD USED BATTERIES ACCORDING TO THE MANUFACTURER'S INSTRUCTIONS. 17.The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70 dB (A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech …

Text truncated - open the document above for the full version.

43WISE-4000 User Manual Chapter 4 System Configuration Wireless Module Information For WISE-4000 Wireless Series, user can check WLAN RSSI Level to know the sig- nal quality in Wireless Status part. And it also shows the MAC ID of the client device. If the module is working in AP Mode, WLAN RSSI Level and Refresh button will not been shown WLAN Mode will be shown in Network Information WISE-4000 User Manual44 Module Information 1.In the information page, you can see the dashboard: module detail, network setting, and module information, including the firm- ware version. 2.Click "Go to Configuration” to perform the configuration. 45WISE-4000 User Manual Chapter 4 System Configuration Module Configuration You can click different tab to switch the item you are going to configure [Information] Customized Name / UUID Means model name and UUID of the mod- ule. You also can rename it for recognition if required. Description You can add comments on this module for recognition. Location Information You can note the location information for the module WISE-4000 User Manual46 Wireless (WISE-4000 Wireless module only) [AP Mode] When using the module in AP mode, users can configure the SSID and also decide how the WISE module works as an AP, including the security. The AP-Network is fixed and does not allow user to make their own changes. 47WISE-4000 User Manual Chapter 4 System Configuration [Infrastructure Mode] When using the module in Infrastructure mode, users need to enter the SSID of the AP that WISE going to access, and config- ure the security from here. After configuring the AP the WISE module going to access, the network configuration also needs to be defined in the Infrastruc- ture-Network. [Network] For WISE-4000/LAN wired module, you can select the Connection mode as DHCP or Static IP and configure the IP address, Subnet address, and Default gateway. WISE-4000 User Manual48 [Network App] You configure the web server port, Host Idle (timeout), and decide whether to enable communication WDT here [Time & Date] You can see the current time here, decide which time zone for your local time, and also do the time calibration by read the time from host devices [SNTP] You can enable the SNTP function, so the module can act as a SNTP client to do time synchronization from assigned SNTP server. 49WISE-4000 User Manual Chapter 4 System Configuration [Modbus] In order to provide user with more flexible and scalable in deploying module, this module remove the limitation of Modbus address setting and make it configurable as user's actual need. Basically, there're two kinds of Modbus address section (0X and 4X) for you to configure each function item. [Control] Enable Locate It can help user search module with light sign. (Status LED will be constantly on for 30 sec when it enabled.) Restore to Default The system configuration of module will be clear and restored to factory default when it enabled. Reset Password You can reset the password here System Restart The system of this module will reboot when it enabled. WISE-4000 User Manual50 [General] After Communication WDT been enabled in "Network App" tab, you can enable the IO FSV triggered by communication WDT The Scan Interval here decides the I/O polling interval in the next part of the “I/O Status”. This value will not be saved into the module, so it is valid until the power is switched off. [Firmware] User can upgrade the firmware file here. Or Upload/Download the configuration file from WISE-4000 wireless module. The following items will be saved in the configuration file: [Account] You can change the passwords of each account here. Configuration Information, Wireless, Network App, Time & Data, SNTP, Modbus, General Cloud, Account I/O StatusI/O Configuration Advanced Access Control, Data Logger (Data log and Cloud upload) 51WISE-4000 User Manual Chapter 4 System Configuration I/O Status [Status] The I/O statuses are shown here, for the output status, you can also change the I/O status here. WISE-4000 User Manual52 [Configuration] Setting User can do detail I/O setting in the tab, include the Tag Name, range type, filter, and also the working mode. Calibration For the analog module, after login root account, user can click calibration button to restore the factory calibration value. Overview In the end, there is an overview table for the configuration summary of each chan- nel 53WISE-4000 User Manual Chapter 4 System Configuration [Trend] The status trend of I/O will be shown here. Advanced Function - Access Control To avoid unauthorized access, you can manage which host PC or device can remotely control the WISE-4000 module by IP or MAC Address. WISE-4000 User Manual54 Enable one of the rows and enter the IP address or MAC address which allows to access the WISE-4000 device. For WISE-4000 wireless modules, users can only configure access control by the IP address, not the MAC address Advance Function - Data Log The WISE-4000 series supports data log functions, the I/O status can be logged in the module and also be queried from the module . Local Log Configuration [Enable Log] Start Log Users can enable the data logger here 55WISE-4000 User Manual Chapter 4 System Configuration [Log Conditions]. By Period Check the box to enable periodically log- ging, and the log period can be decided in following box. Pleased been noted that the period is increased by 0.1 sec, it means if user configure "600" here, the status of the I/O will be logged each minute. By Communication WDT If the communication WDT has been enabled, once the condition of the WDT has been met, the status of the I/O will be logged [General] Clear Log when Power Up Decided whether to keep last value when the logger had been restarted. Circular Log when Memory Full Once the box been check, the data will been circular log when memory was full. Otherwise, the logger will stop. [Channel Setting] Users can configure which channel of the module will be logged and decide whether to log the data wh…

Text truncated - open the document above for the full version.

RF_160, Issue 03 Declaration of Authorization We Name:dvantech Co. Ltd. Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, City: Taipei Country: Taiwan, R.O.C. Declare that: Name Representative of agent: Gloria Chang.... (1) Agent Company name: Compliance Certification Services Inc. . Address: No. 989-1 Wenshan Rd., Shang Shan Village, Qionglin Shiang, Hsinchu County 30741, Taiwan City: Hsinchu County 30741 .............. Country : Taiwan R.O.C is authorized to apply for Certification of the following product(s): Product description: IoT Wireless I/O Module Type designation:WISE-4050; WISE-4060; WISE-4012E; WISE-40XXXXXXXXXXXXXXXX(where "X" may be any alphanumeric character , - or blank) Trademark: ADVANTECH on our behalf. Date: 2015-09-04 Signature ________________________ Name/Title: Lily Huang / Assistant Manager Corporate Quality Applicant: Advantech Co., Ltd. Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. TEL: 886-2-2792-7818 FAX: 886-2- 2794-7334 Email: [email protected]

DECLARATION OF CONFORMITY (DoC) Equipment:IoT Wireless I/O Module Trademark(s) and Model(s):ADVANTECH / WISE-4050; WISE-4060; WISE-4012E; WISE-40XXXXXXXXXXXXXXXX(where "X" may be any alphanumeric character , - or blank) Manufacturer:Advantech Co., Ltd. FCC ID in case other parts of this: equipment are subject to certification: M82-WISE4000 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The following test reports are subject to this declaration: Test report number:Issue date: T150120L05-D 2015-07-17 T150121L07-D 2015-05-07 T150121L07-D 2015-03-24 The following manufacturer/importer/entity (located in the USA) is responsible for this declaration: Company name: Advantech Co., Ltd. Name/Title (legal representative): Lily Huang / Assistant Manager Corporate Quality Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Phone: 886-2-2792-7818 Fax: 886-2-2794-7334 E-mail: [email protected] Date: 04.September.2015 Signature: ________________________________

Advantech Co., Ltd. 北路2620弄1 No.1, Alley 20, Lane 26, Rueiguang Road Neihu District, Taipei 114, Taiwan, R.O.C. Tel:886-2-2792-7818 Fax:886-2-2794-7334 WWW.advantech.com 2015/11/16 Dear Sir, I would like to clarify the operating frequency range and intended operating purpose for below equipment: Model Name: WISE-4050; WISE-4060; WISE4012E FCC ID: M82-WISE4000 Product Name: IoT Wireless I/O Module WISE-4050, WISE-4060&WISE-4012E can not transmission data without connected to computer. Because the EUT transmit data to computer must using wireless access point. The micro USB interface of WISE-4012E only used for 5V DC power supplying, just as the description in WISE series user manual. This device can be only connected to fixed applications for wireless transmission. It can be only operated with the authentication protocol for devices’s operation. ______________________________ Name/Title: Lily Huang / Supervisor Company Name: Advantech Co., Ltd. Address: No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. TEL: 886-2-2792-7818#1412 FAX: 886-2-2794-7334 Email: [email protected]

Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 75 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. EXTERNAL PHOTO WISE-4050 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 76 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. WISE-4060 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 77 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. WISE-4012E Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 78 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 79 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Micro USB Cable Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 80 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. USB Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 81 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Tool Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 82 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Fixture

Labbel Locaation

Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 83 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. INTERNAL PHOTO WISE-4050 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 84 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 85 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 86 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 87 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 88 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Antenna Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 89 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. WISE-4060 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 90 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 91 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 92 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 93 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 94 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 95 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Antenna Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 96 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. WISE-4012E Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 97 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 98 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 99 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 100 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc.

Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 1 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. IEEE C95.1 KDB 447498 D03 47 C.F.R. Part 1, Subpart I, Section 1.1310 47 C.F.R. Part 2, Subpart J, Section 2.1091 RF EXPOSURE REPORT For IoT Wireless I/O Module Model: WISE-4050 ; WISE-4060 ; WISE-4012E ; WISE-40XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Trade Name: ADVANTECH Issued for Advantech Co. Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Hsinchu Lab. NO. 989-1, Wenshan Rd., Shangshan Village, Qionglin Township, Hsinchu County 30741, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: August 27, 2015 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 2 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 08/27/2015 Initial Issue All Page Vera Hsu Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 3 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. TABLE OF CONTENTS 1. LIMIT .............................................................................................................................. 4 2. EUT SPECIFICATION .................................................................................................... 4 3. TEST RESULTS ............................................................................................................ 5 4. MAXIMUM PERMISSIBLE EXPOSURE ........................................................................ 6 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 4 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 1. Limit According to §15.247(i), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess of the Commission's guidelines. See § 1.1307(b)(1) of this chapter. 2. EUT Specification Product Name IoT Wireless I/O Module Model Number WISE-4050 ; WISE-4060 ; WISE-4012E ; WISE-40XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Identify Number T150120L05 Received Date January 20, 2015 Frequency band (Operating) 802.11b/g/n HT20: 2.412GHz ~ 2.462GHz Others Device category Portable (<20cm separation) Mobile (>20cm separation) Others Exposure classification Occupational/Controlled exposure (S = 5mW/cm 2 ) General Population/Uncontrolled exposure (S=1mW/cm 2 ) Antenna Specification Antenna Gain :3.26 dBi (Numeric gain: 2.12) Maximum Average output power IEEE 802.11b Mode: 15.00 dBm (31.623 mW) IEEE 802.11g Mode: 16.45 dBm (44.157 mW) IEEE 802.11n HT 20 Mode: 16.39 dBm (43.551 mW) Evaluation applied MPE Evaluation* SAR Evaluation N/A Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 5 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 3. Test Results No non-compliance noted. Calculation Given d GP E   30 & 377 2 E S Where E = Field strength in Volts / meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power density in watts / meter Combining equations and re-arranging the terms to express the distance as a function of the remaining variables yields: 2 377 30 d GP S   Changing to units of mW and cm, using: P (mW) = P (W) / 1000 and d (cm) = d(m) / 100 Yields   22 0796.0 100/377 1000/30 d GP d GP S      Equation 1 Where d = Distance in cm P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1-1 Page 6 Rev.00 This report shall not be reproduced except in full, without the written approval of Compliance Certification Services. 4. Maximum Permissible Exposure Substituting the MPE safe distance using d = 20 cm into Equation 1: GPS000199.0 Where P = Power in mW G = Numeric antenna gain S = Power density in mW / cm 2 IEEE 802.11b mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power densit y in mW / cm 2 Limit (mW/cm2) 243731.6232.12200.01331 IEEE 802.11g mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power densit y in mW / cm 2 Limit (mW/cm2) 243744.1572.12200.01861 IEEE 802.11n HT20 mode: Frq.(MHz) P (mW) Gain (num.) D (cm) Power densit y in mW / cm 2 Limit (mW/cm2) 243743.5512.12200.01841

Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 1 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. FCC 47 CFR PART 15 SUBPART C AND ANSI C63.10:2009 TEST REPORT For IoT Wireless I/O Module Model: WISE-4050 ; WISE-4060 ; WISE-4012E ; WISE-40XXXXXXXXXXXXXXXX (where "X" may be any alphanumeric character , “-” or blank) Trade Name: ADVANTECH Issued for Advantech Co. Ltd. No.1, Alley 20, Lane 26, Rueiguang Road, Neihu District, Taipei 114, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. Hsinchu Lab. No.989-1, Wenshan Rd., Shangshan Village, Qionglin Township, Hsinchu County 30741, Taiwan (R.O.C.) TEL: +886-3-5921698 FAX: +886-3-5921108 http://www.ccsrf.com E-Mail: [email protected] Issued Date: August 27, 2015 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF or any government agencies. The test results of this report relate only to the tested sample identified in this report. Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 2 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. Revision History Rev. Issue Date Revisions Effect Page Revised By 00 07/21/2015 Initial Issue All Page 93 Dola Hsieh 01 08/27/2015 Revised report per client’s requirement. P. 1, P.4-5, P. 45-54, P.70-71, P.77-82, P.96-100. Vera Hsu Compliance Certification Services Inc. FCC ID: M82-WISE4000 Report No.：T150120L05-RP1 Page 3 / 100 This report shall not be reproduced, except in full, without the written approval of Compliance Certification Services Inc. TABLE OF CONTENTS TITLE PAGE NO. 1. TEST REPORT CERTIFICATION ................................................................................ 4 2. EUT DESCRIPTION ..................................................................................................... 5 3. DESCRIPTION OF TEST MODES ............................................................................... 7 4. TEST METHODOLOGY ............................................................................................... 8 5. FACILITIES AND ACCREDITATION ........................................................................... 8 5.1 FACILITIES ............................................................................................................ 8 5.2 ACCREDITATIONS................................................................................................ 8 5.3 MEASUREMENT UNCERTAINTY ......................................................................... 9 6. SETUP OF EQUIPMENT UNDER TEST...................................................................... 10 7. FCC PART 15.247 REQUIREMENTS.......................................................................... 11 7.1 6dB BANDWIDTH.................................................................................................. 11 7.2 MAXIMUM PEAK OUTPUT POWER ..................................................................... 19 7.3 AVERAGE POWER ............................................................................................... 21 7.4 POWER SPECTRAL DENSITY ............................................................................. 23 7.5 CONDUCTED SPURIOUS EMISSION ......................................................…

Text truncated - open the document above for the full version.