M9H-MA520MA520, OMA520

MorphoAccess TM Installation Guide MA500 Series Produced by Sagem Sécurité Copyright ©2007 Sagem Sécurité www.sagem-securite.com MorphoAccess TM Installation guide OMA520/521 and MA500/520/521 July 2007 SK 0000053018-03 2 SAGEM Sécurité document. Reproduction and disclosure forbidden. SK-53018-03 CONTENTS INTRODUCTION 5 SAFETY INSTRUCTIONS 6 EUROPE INFORMATION : 6 USA INFORMATION 7 CANADIAN INFORMATION 7 GENERAL DESCRIPTION 8 MA5XX VERSIONS INSTALLATION PROCEDURE 10 STAGE 1: DRILLING THE MOUNTING HOLES 10 STAGE 2: MOUNTING THE METAL CHASSIS ASSEMBLY 11 STAGE 3: CONNECTING THE CHASSIS ASSEMBLY TO THE COVER ASSEMBLY 12 STAGE 4: CLOSING MORPHOACCESS™ 13 OMA5XX VERSIONS INSTALLATION PROCEDURE 14 STAGE 1: DRILLING THE MOUNTING HOLES 14 STAGE 2 : OMA5XX FIXING 15 STAGE 3 : OMA5XX CABLING 15 STAGE 4 : CLOSING OMA5XX 15 ELECTRICAL INTERFACE 16 MA5XX TERMINAL BLOCK BOARD WIRING 16 OMA5XX REAR VIEW AND CABLES 17 POWER SUPPLY SOURCE 18 WIEGAND OUTPUT WIRING 19 DATA CLOCK OUTPUT WIRING 19 WIEGAND INPUT WIRING 20 DATA CLOCK INPUT WIRING 20 COM RS422 SERIAL PORT 21 COM RS485 SERIAL PORT 21 ETHERNET WIRING 22 OUTPUT RELAY AND SECURITY SWITCHES 23 USER INTERFACE 25 SK-53018-03 SAGEM Sécurité document. Reproduction and disclosure forbidden. 3 MORPHOACCESS TM MA5XX SERIES TECHNICAL CHARACTERISTICS 26 MAN MACHINE INTERFACE 26 BIOMETRY 26 PERIPHERALS INTERFACES 26 POWER SUPPLY 27 SIZE AND WEIGHT 27 ENVIRONNEMENTAL CONDITIONS 28 RECOMMENDATIONS 29 AREAS CONTAINING COMBUSTIBLES 29 GENERAL PRECAUTIONS 29 SPECIFIC PRECAUTIONS FOR RADIO TERMINALS 29 ETHERNET CONNECTION 30 DATE / TIME SYNCHRONIZATION 30 CLEANING PRECAUTIONS 30 WARNING 30 BIOMETRICS TERMINALS HOT LINE 30 APPENDIX 1 - FINGERPRINT PLACEMENT RULES 31 APPENDIX 2 – RELATED DOCUMENTS 32 APPENDIX 3 - DRILLING TEMPLATE 34 MA5XX VERSIONS 34 OMA5XX VERSIONS 35 SUPPORT 36 CUSTOMER SERVICE 36 HOTLINE 36 4 SAGEM Sécurité document. Reproduction and disclosure forbidden. SK-53018-03 I I N N T T R R O O D D U U C C T T I I O O N N Congratulations for choosing the SAGEM MorphoAccess™ 1 Automatic Fingerprint Recognition Terminal. MorphoAccess™ provides an innovative and effective solution for access control applications using Fingerprint Verification or/ and Identification. Among a range of alternative biometric techniques, the use of finger imaging has significant advantages: each finger constitutes an unalterable physical signature which develops before birth and is preserved until death. Unlike DNA, a finger image is unique to each individual - even identical twins. The MorphoAccess™ terminal integrates SAGEM image processing and feature matching algorithms (MorphoSoft™ and MorphoImaging™). This technology is based on lessons learned during more than 20 years of experience in the field of biometric identification and the creation of literally millions of individual fingerprint identification records. We believe you will find the SAGEM MorphoAccess™ fast, accurate, easy to use and suitable for physical access control. The SAGEM MorphoAccess™ offers the following advantages: • High quality optical sensor ( IQS certified ) • Supports multiple input/output interfaces used in the physical access control industry. • Local area network interface for easy interaction with other host systems. • Compact size for easy installation and integration into your available office space. • Intuitive man machine interface with keyboard and display, that is easy to use in both setup and operational modes. • Open architecture, with dedicated applications implemented via MA5xx/1xx Software Development Kit. To ensure the most effective use of your SAGEM MorphoAccess™, we recommend that you read this Installation Guide thoroughly. 1 The SAGEM logo and trademark are the property of SAGEM Sécurité. All other trademarks or product names are trademarks or product names of the respective title holders. SK-53018-03 SAGEM Sécurité document. Reproduction and disclosure forbidden. 5 S S A A F F E E T T Y Y I I N N S S T T R R U U C C T T I I O O N N S S The installation of this product should be made by a qualified service technician and should conform to all local codes. It is strongly recommended that a class II power supply at 12 V ±5% and 0.75 A. min be used in accordance with Safety Electrical Low Voltage (SELV) parameters. The 12 V power supply cable length should not exceed 5 meters. This product may be installed with a power supply conforming to EN60950, in accordance with the NEC Class 2 requirements; or supplied by a listed EN60950 external Power Unit marked Class 2, Limited Power source, or LPS and rated 12 V DC, 0.75 A minimum. In case of “Power Over Ethernet” use, the POE hub or switch features has to be conformed with IEEE 802.3-af standard. An insulation greater than 2000V is provided between MA5xx terminal and Ethernet network. In case of building to building connection it is recommended to connect 0V to ground. This ground (ground security reference) cable must be connected with the terminal block board fixation screw marked with the universal ground symbol ( see p16 ). E E u u r r o o p p e e i i n n f f o o r r m m a a t t i i o o n n : : SAGEM hereby declares that the SAGEM MorphoAccess™ has been tested and found compliant with the following listed standards as required by the EMC Directive 89/336/EEC: EN55022 (1994) / EN55024 (1998), EN300-330 (1999) and by the low voltage Directive 73/23/EEC amended by 93/68/EEC: EN60950 (2000). Caution: The MA500 terminal is a Class A device. In a residential environment, this device may cause interference. In this case, the user is encouraged to try to correct the interference with appropriated measures such as : • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. 6 SAGEM Sécurité document. Reproduction and di…

Text truncated - open the document above for the full version.

Produced by SAGEM Sécurité Copyright ©2007 SAGEM Sécurité www.sagem-securite.com MorphoAccess TM 500 Series User Guide July 2007 SK-60806 MorphoAccess TM 500 Series User Guide 2 SAGEM Sécurité document. Reproduction and disclosure forbidden SAGEM Sécurité document. Reproduction and disclosure forbidden. 3 Table of content INTRODUCTION 552 CAUTION 662 MORPHOACCESS TM PRESENTATION 882 INTERFACES PRESENTATION 992 SYSTEM SYNOPTIC 11112 TERMINAL PRESENTATION 13132 ACCESS CONTROL PRESENTATION 15152 SENDING THE ID TO THE CENTRAL SECURITY CONTROLLER 19192 TERMINAL CONFIGURATION 21212 EASY SETUP ASSISTANT 22222 ADMINISTRATION MENU 26262 UNDERSTANDING MORPHOACCESS TM CONFIGURATION 29292 MODIFYING A PARAMETER USING THE CONFIGURATION APPLICATION 31312 CONFIGURING A NETWORKED MORPHOACCESS TM 34342 UPGRADING THE FIRMWARE 36362 DOWNLOADING A LICENCE 37372 STAND ALONE MODES (NETWORKED OR NOT CONNECTED) 41412 PRELIMINARY: ADDING A BIOMETRIC TEMPLATE IN LOCAL DATABASE 42422 MACCESS APPLICATION: ACCESS CONTROL OR TIME & ATTENDANCE 43432 ACCESS CONTROL BY IDENTIFICATION 45452 ACCESS CONTROL BY IDENTIFICATION (MA-XTENDED LICENCE LOADED) 47472 INTRODUCTION TO CONTACTLESS AUTHENTICATION 50502 AUTHENTICATION WITH BIOMETRIC TEMPLATES ON CARD 52522 PIN VERIFICATION – PIN STORED ON CARD 53532 BIOPIN VERIFICATION - BIOPIN STORED ON CARD 54542 AUTHENTICATION WITH BIOMETRIC TEMPLATES IN LOCAL DATABASE 55552 AUTHENTICATION BASED ON CARD MODE 57572 MULTI-FACTOR MODE 59592 AUTHENTICATION WITH LOCAL DATABASE: ID ENTERED FROM KEYBOARD 60602 AUTHENTICATION WITH LOCAL DATABASE: ID INPUT FROM WIEGAND OR DATACLOCK 62622 BYPASSING THE BIOMETRIC CONTROL IN AUTHENTICATION 65652 RECOGNITION MODE SYNTHESIS 67672 SETTING UP RECOGNITION STRATEGY 68682 SETTING UP MATCHING PARAMETERS 69692 4 SAGEM Sécurité document. Reproduction and disclosure forbidden PROXY MODE 72722 PROXY MODE (OR SLAVE) PRESENTATION 73732 PROXY MODE ACTIVATION 74742 APPLICATION CUSTOMIZATION 75752 SETTING UP TIME MASK 76762 MULTILINGUAL APPLICATION 77772 RESULT EXPORTATION 78782 REMOTE MESSAGES: SENDING THE ID TO THE CENTRAL SECURITY CONTROLLER 79792 RELAY ACTIVATION 80802 LOG FILE 81812 LED IN ACTIVATION 82822 SECURITY FEATURES 83832 TAMPER SWITCH MANAGEMENT 84842 PASSWORDS 86862 ANNEX 87872 MORPHOACCESS TM 220 320 COMPATIBILITY 88882 CONTACTLESS MODES TABLE 90902 REQUIRED TAGS ON CONTACTLESS CARD 91912 FAQ 92922 RELATED DOCUMENTS 93932 SAGEM Sécurité document. Reproduction and disclosure forbidden. 5 I I N N T T R R O O D D U U C C T T I I O O N N Congratulations for choosing the SAGEM MorphoAccess™ 500 Automatic Fingerprint Recognition Terminal. MorphoAccess TM 500 Series provides an innovative and effective solution for access control applications using Fingerprint Verification or/ and Identification. Among a range of alternative biometric techniques, the use of finger imaging has significant advantages: each finger constitutes an unalterable physical signature, which develops before birth and is preserved until death. Unlike DNA, a finger image is unique to each individual - even identical twins. The MorphoAccess TM terminal integrates SAGEM image processing and feature matching algorithms. This technology is based acquired knowledge during 20 years of experience in the field of biometric identification and the creation of literally millions of individual fingerprint identification records. We believe you will find the SAGEM MorphoAccess TM fast, accurate, easy to use and suitable for physical access control or time and attendance. To ensure the most effective use of your SAGEM MorphoAccess TM , we recommend that you read this User Guide entirely. 6 SAGEM Sécurité document. Reproduction and disclosure forbidden C C A A U U T T I I O O N N Europe information: SAGEM hereby declares that the SAGEM MorphoAccess™ has been tested and found compliant with the following listed standards as required by the EMC Directive 89/336/EEC: EN55022 (1994) / EN55024 (1998), EN300-330 (1999) and by the low voltage Directive 73/23/EEC amended by 93/68/EEC: EN60950 (2000). Caution: The MA500 terminal is a Class A device. In a residential environment, this device may cause interference. In this case, the user is encouraged to try to correct the interference with appropriated measures such as : • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. USA information: NOTE: FCC part 15 certificates are pending. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Responsible Party: Sagem Morpho Inc, 1145 Broadway Plaza, Suite 200, Tacoma, Washington (USA), 98402, (800) 346-2674. Note: This equipment has been tested and found to comply with the limits for a Class B (MA520, MA521, OMA520, OMA521) or Class A (MA500) digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following m…

Text truncated - open the document above for the full version.

October 18, 2007 Subject: Proposed changes to MorphoAccess 500 Series User & Installation Guides. To whom it may concern, We have proposed the following changes to the MorphoAccess 500 Series User and Installation guides. Installation Guide , pages 7 and 8 of 38 will be replaced with the modified amendment on the following page. User Guide , pages 6 and 7 of 94 will be replaced with the modified amendment on the following page. Certification information that is contained in the Preliminary User and Installation guides should be disregarded in favor of the modified page that will become part of the final draft of these guides. Scott R. De Witt Hardware Technician Sagem Morpho Inc. Certifications Europeinformation:SAGEM hereby declares that the SAGEM MorphoAccess has been tested and found compliant with the following listed standards as required by the EMC Directive 89/336/EEC: EN55022 (1994) / EN55024 (1998), EN300-330 (1999) and by the low voltage Directive 73/23/EEC amended by 93/68/EEC: EN60950 (2000). USA information: Responsible Party: Sagem Morpho Inc, 1145 Broadway Plaza, Suite 200, Tacoma, Washington (USA), 98402, (800) 346-2674. Caution:Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at their own expense. This device complies with part 15 Class A of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Canadian information: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.

Northwest EMC TCB Compliance Opinion Rev. 9/15/03 SAGM0027 Information about the Applicant Grantee (Company Name) Sagem Morpho, Inc. FCC Contact Person Scott R De Witt Address 1145 Broadway Plaza, Suite 200 City, State, Zip Tacoma, Washington 98402 Job Number SAGM0027 Model MA520, OMA520 FCC ID M9H-MA520 Agent Northwest EMC, Inc. Approval Type Original Equipment Class DXT Part 15, Low Power Transceiver, Rx Verified Rule Part 15.225 Overview This application is for a Biometric Access Control terminal, which has an ISO/IEC 14443 type Mifare contactless RFID reader. Model MA520 is used indoors, while model OMA520 is used outdoors. Both models are electrically identical and use the identical radio. Confidentiality requested for allowed files. Request is properly addressed and referenced. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature David M. Tolman, TCB Committee 10/30/2007

Sagem Morpho Inc. 1145 Broadway Plaza, Suite 200 Tacoma, WA 98402 July 24, 2007 To whom it may concern, We are submitting this application for certification of Sagem Morpho’s MA520 Biometric Access Control terminal FCC ID: M9H-MA520. The radio is an ISO/IEC 14443 type Mifare contactless RFID reader. We are seeking certification under FCC 15-225. Please note, this certification will be used for the MA520 and the OMA520. Both devices utilize the same radio and are the same electrically. The MA520 is intended for indoor use and the OMA520 is intended for outdoor use. The EUT utilizes a single antenna integral to the unit. Your efforts in meeting all of the requirements to successfully apply for FCC and Industry Canada certifications are greatly appreciated. Sincerely, Scott De Witt Hardware Technician Sagem Morpho Inc. 1145 Broadway Plaza, Suite 200 Tacoma, WA 98402 Phone: (253) 680-6932 Email:[email protected]

Antenna Information Antenna Type: Loop Area/Size: 24.75 cm2 Integrated, dedicated, or connected: Integrated Class: 1 The antenna design consists of unique coupling to the transmitter circuitry and is therefore compliant with paragraph 15.203 of the FCC rules. The device operates at 13.56 MHz + or – 7 KHz and this is not a Part 15.247 transmitter. The unit operates only with the Integrated uniquely coupled loop type antenna (Internal Sagem part number 260455600B).

SAGEM Morpho, Inc. MA520 & OMA520 October 17, 2007 Report No. SAGM0027 Report Prepared By www.nwemc.com 1-888-EMI-CERT © 2007Northwest EMC, Inc 22975 NW Evergreen Parkway Suite 400 Hillsboro, Oregon 97124 Certificate of Test Issue Date: October 17, 2007 SAGEM Morpho, Inc. Model: MA520 & OMA520 Emissions Test Description Specification Test Method Pass/Fail Field Strength of Fundamental FCC 15.225:2006 ANSI C63.4:2003 Pass Field Strength of Spurious Emissions FCC 15.225:2006 ANSI C63.4:2003 Pass AC Powerline Conducted Emissions FCC 15.207:2006 ANSI C63.4:2003 Pass Frequency Stability FCC 15.225:2006 ANSI C63.4:2003 Pass Modifications made to the product See the Modifications section of this report Test Facility The measurement facility used to collect the data is located at: Northwest EMC, Inc. 22975 NW Evergreen Parkway, Suite 400 Hillsboro, OR 97124 Phone: (503) 844-4066 Fax: 844-3826 This site has been fully described in a report filed with and accepted by the FCC (Federal Communications Commission) and Industry Canada. Approved By: Donald Facteau, IS Manager NVLAP Lab Code: 200630-0 This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. Product compliance is the responsibility of the client, therefore the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. This Report may only be duplicated in its entirety. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Northwest EMC Revision History Revision 05/05/03 Revision Number Description Date Page Number 00 None Northwest EMC Accreditations and Authorizations Revision 03/18/05 FCC: Accredited by NVLAP for performance of FCC radio, digital, and ISM device testing. Our Open Area Test Sites, certification chambers, and conducted measurement facilities have been fully described in reports filed with the FCC and accepted by the FCC in letters maintained in our files. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by the FCC as a Telecommunications Certification Body (TCB). This allows Northwest EMC to certify transmitters to FCC specifications in accordance with 47 CFR 2.960 and 2.962. NVLAP: Northwest EMC, Inc. is accredited under the United States Department of Commerce, National Institute of Standards and Technology, and National Voluntary Laboratory Accreditation Program for satisfactory compliance with the requirements of ISO/IEC 17025 for Testing Laboratories. The NVLAP accreditation encompasses Electromagnetic Compatibility Testing in accordance with the European Union EMC Directive 2004/108/EC, and ANSI C63.4. Additionally, Northwest EMC is accredited by NVLAP to perform radio testing in accordance with the European Union R&TTE Directive 1999/5/EEC, the requirements of FCC, and the RSS radio standards for Industry Canada. NVLAP LAB CODE 200629-0 NVLAP LAB CODE 200630-0 NVLAP LAB CODE 200676-0 NVLAP LAB CODE 200761-0 Industry Canada: Accredited by NVLAP for performance of Industry Canada RSS and ICES testing. Our Open Area Test Sites and certification chambers comply with RSS 212, Issue 1 (Provisional) and have been filed with Industry Canada and accepted. Northwest EMC has been accredited by ANSI to ISO / IEC Guide 65 as a product certifier. We have been designated by NIST and recognized by Industry Canada as a Certification Body (CB) per the APEC Mutual Recognition Arrangement (MRA). This allows Northwest EMC to certify transmitters to Industry Canada technical requirements. CAB: Designated by NIST and validated by the European Commission as a Conformity Assessment Body (CAB) to conduct tests and approve products to the EMC directive and transmitters to the R&TTE directive, as described in the U.S. - EU Mutual Recognition Agreement. TÜV Product Service: Included in TUV Product Service Group's Listing of Recognized Laboratories. It qualifies in connection with the TUV Certification after Recognition of Agent's Testing Program for the product categories and/or standards shown in TUV's current Listing of CARAT Laboratories, available from TUV. A certificate was issued to represent that this laboratory continues to meet TUV's CARAT Program requirements. Certificate No. USA0604C. TÜV Rheinland: Authorized to carryout EMC tests by order and under supervision of TÜV Rheinland. This authorization is based on "Conditions for EMC-Subcontractors" of November 1992. Northwest EMC Accreditations and Authorizations Revision 03/18/05 NEMKO: Assessed and accredited by NEMKO (Norwegian testing and certification body) for European emissions and immunity testing. As a result of NEMKO's laboratory assessment, they will accept test results from Northwest EMC, Inc. for product certification (Authorization No. ELA 119). Australia/New Zealand: The National Association of Testing Authorities (NATA), Australia has been appointed by the ACA as an accreditation body to accredit test laboratories and competent bodies for EMC standards. Accredited test reports or assessments by competent bodies must carry the NATA logo. Test reports made by an overseas laboratory that has been accredited for the relevant standards by an overseas accreditation body that has a Mutual Recognition Agreement (MRA) with NATA are also accepted as technical grounds for product conformity. The report should be endorsed with the respective logo of the accreditation body (NVLAP). VCCI: Accepted as an Associate Member to the VCCI, Acceptance No. 564. Conducted and radiated measurement facilities have been registered in accordance with Regulations for Voluntary Control Measures, Article 8. (Registration Numbers. - Hillsboro: C-1071, R-1025, C- 2687, T-289, and R-2318, Irvine: R-1943, C-2766, and T-298, Sultan: R-871, …

Text truncated - open the document above for the full version.

NORTHWEST EMC Radiated Emissions PSA 2007.05.07 NORTHWEST EMC Radiated Emissions PSA 2007.05.07 NORTHWEST EMC Radiated Emissions PSA 2007.05.07 NORTHWEST EMC photo CONDUCTED EMISSIONS PSA-ESCI 2007.05.07 NORTHWEST EMC photo CONDUCTED EMISSIONS PSA-ESCI 2007.05.07 NORTHWEST EMC photo CONDUCTED EMISSIONS PSA-ESCI 2007.05.07 NORTHWEST EMC photo AC Powerline Conducted Emissions PSA-ESCI 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF FUNDAMENTAL PSA 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF FUNDAMENTAL PSA 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF FUNDAMENTAL PSA 2007.05.07 NORTHWEST EMC FREQUENCY STABILITY XMit 2007.06.13 NORTHWEST EMC FREQUENCY STABILITY XMit 2007.06.13 NORTHWEST EMC Spurious Radiated Emissions PSA 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF SPURIOUS EMISSIONS PSA 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF SPURIOUS EMISSIONS PSA 2007.05.07 NORTHWEST EMC FIELD STRENGTH OF SPURIOUS EMISSIONS PSA 2007.05.07