MAU026Notebbok Personal Computer

V100 User’s Manual IMPORTANT : This User’s Manual is for Safety Approval purpose only. This is not intended as final release for mass production. (February 2007) TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice. i Table of Contents Preface...................................................................................v Notational Conventions...................................................vi Chapter 1 Getting Started................................................1-1 Getting the Computer Running...........................................1-2 Unpacking....................................................................1-2 Connecting to AC Power...............................................1-2 Opening and Closing the Cover......................................1-3 Turning On and Off the Computer.................................1-3 Taking a Look at the Computer.........................................1-5 Right-Side Components.................................................1-5 Left-Side Components..................................................1-6 Rear Components.........................................................1-7 Front Components........................................................1-8 Bottom Components.....................................................1-9 Top-open Components................................................1-10 Where to Go from Here..................................................1-12 Chapter 2 Operating Your Computer...............................2-1 Starting and Stopping the Computer...................................2-2 Starting the Computer...................................................2-2 Stopping the Computer..................................................2-2 Using the Keyboard..........................................................2-4 Typewriter Keys...........................................................2-4 Cursor-Control Keys.....................................................2-4 Numeric Keypad..........................................................2-5 Function Keys..............................................................2-5 Fn Key........................................................................2-6 ii Hot Keys.....................................................................2-6 Using the Touchpad..........................................................2-8 Configuring the Touchpad.............................................2-9 Using the Touchscreen....................................................2-10 Using the Active Digitizer Feature....................................2-11 Using the Hard Disk Drive..............................................2-12 Replacing the Hard Disk Drive.....................................2-12 Using the Video Features.................................................2-14 Configuring the Display Modes....................................2-14 Using the Audio Features................................................2-16 Connecting Audio Devices...........................................2-16 Using the Communication Features..................................2-17 Using the Modem.......................................................2-17 Using the LAN...........................................................2-17 Using the GPS (Optional)............................................2-18 Chapter 3 Managing Power..............................................3-1 AC Adapter......................................................................3-2 Battery Pack....................................................................3-3 Charging the Battery Pack.............................................3-3 Initializing the Battery Pack...........................................3-4 Battery Automatic Calibration Utility..............................3-5 Checking the Battery Level............................................3-7 Replacing the Battery Pack............................................3-7 Battery Low Signals and Actions....................................3-8 Power Management..........................................................3-9 Hibernation................................................................3-10 Power-Saving Tips.........................................................3-11 Chapter 4 Expanding Your Computer..............................4-1 Connecting an External Monitor (Optional).........................4-2 Connecting a Serial Device................................................4-3 Connecting a USB Device.................................................4-4 Using PC Cards................................................................4-5 PC Card Type..............................................................4-5 iii CardBus Support..........................................................4-5 Inserting and Removing a PC Card.................................4-5 Using the Card Reader......................................................4-7 System Memory Upgrade..................................................4-8 Chapter 5 Using BIOS Setup............................................5-1 When and How to Use BIOS Setup...................................5-2 When to Use................................................................5-2 Starting BIOS Setup......................................................5-2 Moving Around and Making Selections...........................5-4 Main Menu......................................................................5-5 Advanced Menu...............................................................5-6 Security Menu..................................................................5-9 Boot Menu....................................................................5-10 Exit Menu......................................................................5-11 Chapter 6 Installing Software Drivers..............................6-1 How to Use …

Text truncated - open the document above for the full version.

No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Date: Dec. 4th, 2007 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Applications FCC ID: MAU026 Model: V100 We would like to apply for FCC Certification on the subject model (EUT). The EUT is a Notebook Personal Computer built in SIERRA EVDO Module (Model: MC5725V) . We have uploaded the related document for the EUT onto your website. Please review the information we submitted and issue us a grant for the subject model. If you have any comments, please do not hesitate to contact us. Thank you for your attention to these matters. Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 FCC Labeling Requirements and Information Date: Dec. 4th, 2007 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Applications FCC ID: MAU026 Model: V100 The following label information is required by the FCC Rules and Regulations for certified devices. Please find marketing information required by the FCC Rules and Regulations as following: Label Requirements An intentional radiator device subject to certification by the FCC shall carry a warning label which includes the following statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The sample label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time of purchase. FCC ID: MAU026 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory

No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: 886-2-2646-2550 FAX: 886-2-26464641 No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: 886-3-407-1718 FAX:886-3-407-1738 Request for Confidentiality Date: Dec. 4th, 2007 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Applications FCC ID: MAU026 Model: V100 Please be advised that the following information is to be held confidential on behalf of MITAC TECHNOLOGY CORP. q Block Diagram q Schematics q Product Specification q Tune Up Procedure. The application contains technical information which MITAC TECHNOLOGY CORP. deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, ________________ Eddy Hsiung / Director International Standards Laboratory

Mitac Technology Corp. 1st, R&D Road 2 , Hsinchu Science-Based Industrial Park, Hsinchu, Taiwan, R.O.C. TEL : 886-3-5782280 FAX : 886-3-5778270 Letter of Agency Date: Dec. 4th, 2007 American Telecommunications Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 RE: Certification Applications FCC ID: MAU026, MAU027, MAU028, MAU029 Model: V100 To Whom It May Concern: Please be advised that Mitac Technology Corporation authorizes International Standards Laboratory (ISL) to act on our behalf, until otherwise notified, for applications submitted to American Telecommunications Certification Body, Inc. (ATCB). We certify that we are not subject to denial of federal benefits that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse ACT of 1988, U.S.C. 862. Further, no party as defined in 47 CFR 1.2002(b), for this application is subject to denial of federal benefits that includes FCC benefits. Thank you for your attention to this matter. _______________________ Power Shao/Manager Mitac Technology Corp.

Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory Appendix B Photographs of EUT of Product Name Notebook Personal Computer Model V100 (with SIERRA EVDO Module, Model:MC5725V) Brand: GETAC Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory EUT-1. Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory EUT-2. Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory EUT-3.

V100 Label Label Location

Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory EUT-4. Appendix B of Report Number: ISL-07LR029FCP22 International Standards Laboratory EUT-5.

ISL-T10-R5-14 SAR TEST REPORT Product : Notebook Personal Computer Model(s): V100 (with SIERRA 3G Module, Model:MC5725V) Brand: GETAC Applicant: MITAC Technology Corporation Address: 4F, No.1, R&D Road 2, Hsinchu Science-Based industrial Park, Hsinchu 300, Taiwan Test Performed by: International Standards Laborator y <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E-0013; TAF: 0997; NVLAP: 200234-0; IC: IC4164-1; VCCI: R-1435, C-1440, T-299; NEMKO: ELA 113B *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-07LR029SAR-F Issue Date : 2007/11/26 FCC ID:MAU026 International Standards Laboratory Report Number: ISL-07LR029SAR-F -i- Contents of Report 1. General ...............................................................................................................................1 1.1 Certification of Accuracy of Test Data ......................................................................1 1.2 Applicant & Manufacturer Information.....................................................................2 2. Description of Equipment Under Test (EUT)....................................................................3 2.1 Test Environment.......................................................................................................4 3. SAR Measurement System ................................................................................................5 3.1 ALSAS-10U System Description ..............................................................................5 3.1.1 Applications .......................................................................................................5 3.1.2 Area Scans .........................................................................................................5 3.1.3 Zoom Scan (Cube Scan Averaging) ..................................................................6 3.1.4 ALSAS-10U Interpolation and Extrapolation Uncertainty................................6 3.2 Isotropic E-Field Probe ..............................................................................................7 3.2.1 Isotropic E-Field Probe Specification ................................................................8 3.3 Boundary Detection Unit and Probe Mounting Device .............................................8 3.4 Daq-Paq (Analog to Digital Electronics) ...................................................................9 3.5 Axis Articulated Robot ..............................................................................................9 3.6 ALSAS Universal Workstation................................................................................10 3.7 Universal Device Positioner ...................................................................................10 3.8 Phantom Types.........................................................................................................11 3.8.1 APREL Laboratories Universal Phantom ........................................................11 4. Tissue Simulating Liquid .................................................................................................12 4.1 The composition of the tissue simulating liquid ......................................................12 4.2 Tissue Calibration Result .........................................................................................12 4.3 Tissue Dielectric Parameters for Head and Body Phantoms ...................................14 5. SAR Measurement Procedure..........................................................................................15 5.1 SAR System Validation ...........................................................................................15 5.1.1 Validation Dipoles ...........................................................................................15 5.1.2 Validation Result .............................................................................................16 5.2 Arrangement Assessment Setup ..............................................................................17 5.2.1 Test Positions of Device Relative to Head ..........................................................17 5.2.2 Definition of the “Cheek” Position ......................................................................17 5.2.3 Definition of the “Tilted” Position.......................................................................19 5.2.4 Test Positions for body-worn...............................................................................19 5.3 SAR Measurement Procedure..................................................................................20 6. SAR Exposure Limits ......................................................................................................21 7. Test Equipment List .........................................................................................................22 8. Measurement Uncertainty ................................................................................................23 9. EUT test Position .............................................................................................................24 9.1. EUT Test Position : Laptop Mode .........................................................................24 9.2. EUT Test Position: Tablet Mode .............................................................................24 FCC ID:MAU026 International Standards Laboratory Report Number: ISL-07LR029SAR-F -ii- 10. Test Result Summary ...................................................................................................25 10.1. FCH_RC1 ............................................................................................................25 10.2. FCH_RC1 ............................................................................................................26 10.3. 1xEVDO Rev.0 RTAP 153.6K .........................................................…

Text truncated - open the document above for the full version.

Appendix A of Report Number: ISL-07LR029SAR-F International Standards Laboratory Appendix A Photographs of Test Setup of Product Name Notebook Personal Computer Model V100 (with SIERRA 3G Module, Model:MC5725V) Brand: GETAC Appendix A of Report Number: ISL-07LR029SAR-F International Standards Laboratory -1- Setup-1. Setup-2. Appendix A of Report Number: ISL-07LR029SAR-F International Standards Laboratory -2- Setup-3. Setup-4.

Appendix B of Report Number: ISL-07LR029SAR-F International Standards Laboratory Appendix B Photographs of EUT of Model V100 (with SIERRA EVDO Module, Model:MC5725V) Brand: GETAC Appendix B of Report Number: ISL-07LR029SAR-F International Standards Laboratory EUT-1. Appendix B of Report Number: ISL-07LR029SAR-F International Standards Laboratory EUT-2. Appendix B of Report Number: ISL-07LR029SAR-F International Standards Laboratory EUT-3. EUT-4. Appendix B of Report Number: ISL-07LR029SAR-F International Standards Laboratory EUT-5.

Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory Appendix C SAR System Validation Data of Product Name Notebook Personal Computer Model V100 (with SIERRA EVDO Module, Model:MC5725V) Brand: GETAC Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 1 - 1 835 MHz System Validation Data Report Date : 19-Nov-2007 Measurement Date : 19-Nov-2007 Product Data Device Name : Dipole-835 Serial No. : Validation Type : Dipole Model : Standard Frequency : 835.00 MHz Max. Transmit Pwr : 1 W Drift Time : 0 min(s) Length : 161 mm Width : 3.6 mm Depth : 89.8 mm Antenna Type : Internal Power Drift-Start : 10.371 W/kg Power Drift-Finish: 10.225 W/kg Power Drift (%) : -1.404 Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : HEAD Serial No. : 835HEAD Frequency : 835.00 MHz Last Calib. Date : 19-Nov-2007 Temperature : 22.30 °C Ambient Temp. : 22.50 °C Humidity : 52.00 RH% Epsilon : 42.78 F/m Sigma : 0.92 S/m Density : 1000.00 kg/cu. m Probe Data Name : E-field Probe Model : ALS-E-020 Type : E-Field Triangle Serial No. : 266 Last Calib. Date : 09-Jul-2007 Frequency : 835.00 MHz Duty Cycle Factor: 1 Conversion Factor: 6.6 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Measurement Data Crest Factor : 1 Tissue Temp. : 22.30 °C Ambient Temp. : 22.50 °C Set-up Date : 19-Nov-2007 Area Scan : 5x11x1 : Measurement x=15mm, y=15mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm Channel : Mid Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 2 - 1 gram SAR value : 9.615 W/kg 10 gram SAR value : 6.178 W/kg Area Scan Peak SAR : 10.612 W/kg Zoom Scan Peak SAR : 17.215 W/kg Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 3 - Area Scan Plot Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 4 - Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 5 - 2 1900 MHz System Validation Data Report Date : 19-Nov-2007 Measurement Date : 19-Nov-2007 Product Data Device Name : Dipole-1900 Serial No. : Validation Type : Dipole Model : Standard Frequency : 1900.00 MHz Max. Transmit Pwr : 1 W Drift Time : 0 min(s) Length : 68 mm Width : 3.6 mm Depth : 39.5 mm Antenna Type : Internal Power Drift-Start : 45.471 W/kg Power Drift-Finish: 44.438 W/kg Power Drift (%) : -2.272 Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : HEAD Serial No. : 1900HEAD Frequency : 1900.00 MHz Last Calib. Date : 19-Nov-2007 Temperature : 22.40 °C Ambient Temp. : 22.60 °C Humidity : 53.00 RH% Epsilon : 40.57 F/m Sigma : 1.42 S/m Density : 1000.00 kg/cu. m Probe Data Name : E-field Probe Model : ALS-E-020 Type : E-Field Triangle Serial No. : 266 Last Calib. Date : 09-Jul-2007 Frequency : 1900.00 MHz Duty Cycle Factor: 1 Conversion Factor: 5.5 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 6 - Measurement Data Crest Factor : 1 Tissue Temp. : 22.40 °C Ambient Temp. : 22.60 °C Set-up Date : 19-Nov-2007 Area Scan : 7x7x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm Channel : Mid 1 gram SAR value : 39.956 W/kg 10 gram SAR value : 20.856 W/kg Area Scan Peak SAR : 44.979 W/kg Zoom Scan Peak SAR : 78.135 W/kg Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 7 - Area Scan Plot Appendix C of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 8 -

Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory Appendix D SAR Measurement Data of Model V100 (with SIERRA EVDO Module, Model:MC5725V) Brand: GETAC Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 1 - 1 FCH RC1_835MHz SAR measurement Data SAR Test Report Report Date : 19-Nov-2007 Measurement Date : 19-Nov-2007 Product Data Device Name : v100 Serial No. : FCH-RC1_835-Around-Top-L Type : Other Frequency : 835.00 MHz Max. Transmit Pwr : 24dBm Drift Time : 0 min(s) Length : 290 mm Width : 20 mm Depth : 5 mm Antenna Type : Internal Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : BODY Serial No. : 835_Body Frequency : 835.00 MHz Last Calib. Date : 19-Nov-2007 Temperature : 22.30 °C Ambient Temp. : 22.50 °C Humidity : 52.00 RH% Epsilon : 55.98 F/m Sigma : 0.95 S/m Density : 1000.00 kg/cu. m Probe Data Name : E-field Probe Model : ALS-E-020 Type : E-Field Triangle Serial No. : 266 Last Calib. Date : 09-Jul-2007 Frequency : 835.00 MHz Duty Cycle Factor: 1 Conversion Factor: 6.8 Probe Sensitivity: 1.20 1.20 1.20 μV/(V/m) 2 Compression Point: 95.00 mV Offset : 1.56 mm Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 2 - 1.1 835 MHz, EUT Position: Mode 2 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 9x5x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : Low Power Drift-Start : 0.207 W/kg Power Drift-Finish: 0.209 W/kg Power Drift (%) : 0.805 1 gram SAR value : 0.208 W/kg 10 gram SAR value : 0.122 W/kg Area Scan Peak SAR : 0.205 W/kg Zoom Scan Peak SAR : 0.390 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 3 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 4 - 1.2 835 MHz, EUT Position: Mode 2 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 7x7x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : Mid Power Drift-Start : 0.187 W/kg Power Drift-Finish: 0.191 W/kg Power Drift (%) : 2.139 1 gram SAR value : 0.169 W/kg 10 gram SAR value : 0.099 W/kg Area Scan Peak SAR : 0.226 W/kg Zoom Scan Peak SAR : 0.320 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 5 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 6 - 1.3 835 MHz, EUT Position: Mode 2 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 9x5x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : High Power Drift-Start : 0.140 W/kg Power Drift-Finish: 0.143 W/kg Power Drift (%) : 2.098 1 gram SAR value : 0.185 W/kg 10 gram SAR value : 0.112 W/kg Area Scan Peak SAR : 0.200 W/kg Zoom Scan Peak SAR : 0.320 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 7 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 8 - 1.4 835 MHz, EUT Position: Mode 3 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 7x7x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : Mid Power Drift-Start : 0.052 W/kg Power Drift-Finish: 0.054 W/kg Power Drift (%) : 3.851 1 gram SAR value : 0.060 W/kg 10 gram SAR value : 0.034 W/kg Area Scan Peak SAR : 0.065 W/kg Zoom Scan Peak SAR : 0.120 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 9 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 10 - 1.5 835 MHz, EUT Position: Mode 4 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 9x5x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : Mid Power Drift-Start : 0.019 W/kg Power Drift-Finish: 0.018 W/kg Power Drift (%) : -4.174 1 gram SAR value : 0.029 W/kg 10 gram SAR value : 0.015 W/kg Area Scan Peak SAR : 0.028 W/kg Zoom Scan Peak SAR : 0.050 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 11 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 12 - 1.6 835 MHz, EUT Position: Mode 5 Measurement Data Crest Factor : 1 Set-up Date : 19-Nov-2007 Area Scan : 5x9x1 : Measurement x=10mm, y=10mm, z=4mm Zoom Scan : 5x5x8 : Measurement x=8mm, y=8mm, z=4mm DUT Position : Touch Channel : Mid Power Drift-Start : 0.050 W/kg Power Drift-Finish: 0.051 W/kg Power Drift (%) : 2.533 1 gram SAR value : 0.080 W/kg 10 gram SAR value : 0.052 W/kg Area Scan Peak SAR : 0.096 W/kg Zoom Scan Peak SAR : 0.130 W/kg Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 13 - Area Scan Plot Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 14 - 1.7 835MHz Z-Axis plot Frequency: 835MHz, EUT Appendix D of Report Number: ISL-07LR029SAR-F International Standards Laboratory - 15 - 2 FCH RC1_1900MHz SAR measurement Data SAR Test Report Report Date : 19-Nov-2007 Measurement Date : 19-Nov-2007 Product Data Device Name : v100 Serial No. : FCH-RC1_1900-Around-Top Type : Other Frequency : 1900.00 MHz Max. Transmit Pwr : 24dBm Drift Time : 0 min(s) Length : 290 mm Width : 20 mm Depth : 5 mm Antenna Type : Internal Phantom Data Name : APREL-Uni Type : Uni-Phantom Size (mm) : 280 x 280 x 200 Location : Center Tissue Data Type : BODY Serial No. : 1900_Body Frequency : 1900.00 MHz Last Calib. Date : 19-Nov-2007 Temperature : 22.40 °C Ambient Temp. : 22.60 °C Humidity : 53.00 RH% Epsilon : 51.16 F/m Sigma : 1.48 S/m Density : 1000.00 kg/cu. m Probe Data Name : E-field Probe Model : ALS-E-020 Type : E-Field Triangle Serial No. : 266 L…

Text truncated - open the document above for the full version.

NCL CALIBRATION LABORATORIES Calibration File No.: CP-756 Client.: Wistron C E R T I F I C A T E OF C A L I B R A T I O N It is certified that the equipment identified below has been calibrated in the NCL CALIBRATION LABORATORIES by qualified personnel following recognized procedures and using transfer standards traceable to NRC/NIST. Equipment: Miniature Isotropic RF Probe 835 MHz Manufacturer: APREL Laboratories Model No.: E-020 Serial No.: 266 Calibration in Body Tissue Calibration Procedure: SSI/DRB-TP-D01-032-E020-V2 Project No: QTKB-WISB-ALS-E020-16CAL-5290 Calibrated: 9 th July 2007 Released on: 13 th July 2007 NCL CALIBRATION LABORATORIES 51 SPECTRUM WAY Division of APREL Lab. NEPEAN, ONTARIO TEL: (613) 820-4988 CANADA K2R 1E6 FAX: (613) 820-4161 NCL Calibration Laboratories Division of APREL Laboratories. Page 2 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Introduction This Calibration Report reproduces the results of the calibration performed in line with the SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure. The results contained within this report are for APREL E-Field Probe E-020 266. References SSI/DRB-TP-D01-032-E020-V2 E-Field Probe Calibration Procedure IEEE 1528 “Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body Due to Wireless Communications Devices: Experimental Techniques” SSI-TP-011 Tissue Calibration Procedure Conditions Probe 266 was a new probe taken from stock prior to calibration. Ambient Temperature of the Laboratory: 22 °C +/- 0.5°C Temperature of the Tissue: 21 °C +/- 0.5°C NCL Calibration Laboratories Division of APREL Laboratories. Page 3 of 10 This page has been reviewed for content and attested to on Page 2 of this document. Calibration Results Summary Probe Type: E-Field Probe E-020 Serial Number: 266 Frequency: 835 MHz Sensor Offset: 1.56 mm Sensor Length: 2.5 mm Tip Enclosure: Ertalyte* Tip Diameter: <5 mm Tip Length: 60 mm Total Length: 290 mm *Resistive to recommended tissue recipes per IEEE-152…

Text truncated - open the document above for the full version.