MAU046Wireless LAN Module

Rugged Mobile Computing Solutions V200 USER’S MANUAL Aug. 2012 TRADEMARKS TRADEMARKSTRADEMARKS TRADEMARKS The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. All brand and product names are trademarks or registered trademarks of their respective companies. NOTE NOTENOTE NOTE The information in this manual is subject to change without notice. Most screens and operating instructions in this manual are based on Windows 7. If you’re using a different version of Windows, the screens and related operations may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com. ENERGY STAR ® is a government program that offers businesses and consumers energy-efficient solutions, making it easy to save money while protecting the environment for future generations. Please reference ENERGY STAR ® related information from www.energystar.gov. As an ENERGY STAR ® Partner, Getac Technology Corporation has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency. An ENERGY STAR ® qualified computer uses 70 % less electricity than computers without enabled power management features. Earning the Earning the Earning the Earning the E EE ENERGY NERGY NERGY NERGY S SS STAR TARTAR TAR ® ®® ®
When every home office is powered by equipment that has earned the ENERGY STAR ® , the change will keep over 289 billion pounds of greenhouse gases out of the air.
If left inactive, ENERGY STAR ® qualified computers enter a low-power mode and may use 15 watts or less. New chip technologies make power management features more reliable, dependable, and user-friendly than even just a few years ago.
Spending a large portion of time in low-power mode not only saves energy, but helps equipment run cooler and last longer.
Businesses that use ENERGY STAR ® enabled office equipment may realize additional savings on air conditioning and maintenance.
Over its lifetime, ENERGY STAR ® qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years.
Power management (“sleep settings”) on computers and monitors can result in much savings annually. Remember, saving energy prevents pollution Remember, saving energy prevents pollutionRemember, saving energy prevents pollution Remember, saving energy prevents pollution Because most computer equipment is left on 24 hours a day, power management features are important for saving energy and are an easy way to reduce air pollution. By using less energy, these products help lower consumers’ utility bills, and prevent greenhouse gas emissions. i Table of Contents Table of ContentsTable of Contents Table of Contents Chapter 1 Chapter 1Chapter 1 Chapter 1 G GG Getting Started etting Startedetting Started etting Started ................................ ................................................................ .............................................. ............................ .............. 1 11 1- -- -1 11 1 Getting the Computer Running ......................................... 1-2 Unpacking ................................................................ 1-2 Connecting to AC Power ............................................ 1-3 Opening and Closing the Cover ................................... 1-4 Operating in Tablet Mode ........................................... 1-5 Turning On and Off the Computer ............................... 1-7 Taking a Look at the Computer ...................................... 1-8 Front Components ..................................................... 1-8 Rear Components ..................................................... 1-10 Right-Side Components ............................................. 1-11 Left-Side Components ............................................... 1-12 Top-open Components .............................................. 1-13 Bottom Components .................................................. 1-15 Using the Accessories .................................................. 1-17 Using the Tether ..................................................... 1-17 Attaching the Handgrip Strap ...................................... 1-18 Attaching the Shoulder Strap ...................................... 1-18 Chapter Chapter Chapter Chapter 2 22 2 O OO Operating Your Computer perating Your Computerperating Your Computer perating Your Computer ............................. .......................................................... ............................. 2 22 2- -- -1 11 1 Using the Internal Keyboard ............................................2-2 Typewriter Keys ........................................................2-2 Cursor-Control Keys ..................................................2-2 ii Numeric Keypad .......................................................2-3 Function Keys ..........................................................2-4 Fn Key ...................................................................2-4 Hot Keys ................................................................2-4 Using the Touchpad ......................................................2-7 Configuring the Touchpad ............................................2-9 Navigating on the Screen ............................................. 2-10 Using the Touchscreen ............................................. 2-10 Using Multi-touch Gestures ........................................ 2-11 Using the Dual Mode Display (Optional) .................... 2-13 Using Landscape or Portrait View ............................... 2-15 Using the Input Panel ................................................. 2-17 Using the Network Features ........................................... 2-18 Using the Modem ................................................... 2-18 Using the LAN ....................................................... 2-19 Using the Wireless LAN ........................................... 2-19…

Text truncated - open the document above for the full version.

Modular Approval Request Letter Jul. 30, 2012 Dear Application Examiner, Getac Technology Corp. / FCC ID:MAU046 would like to have your authorization as a modular approval. The requirements of Public Notice DA00-1407 have been met and shown on the following statements. Items to be covered Answer from applicant 1. The modular transmitter must have its own RF shielding. Yes, The EUT provides the RF shielding. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with Part 15 requirements under conditions of excessive data rates or over-modulation. The EUT has its buffered modulation. Please see the Schematic Diagram. 3. The modular transmitter must have its own power supply regulation. The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the antenna requirements of Section 15.203 and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The EUT meets the FCC antenna requirements; unique antenna connector and photo of antenna are shown in the test report. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. No, The EUT was tested in Notebook Model V100- G4/V200-G2 Please see section photographs of test configuration in the test report. 6. The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID:MAU046” or “Contains FCC ID:MAU046” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please see exhibition label sample for the FCC ID of this module and end product system. 7. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. The EUT is compliant with all applicable FCC rules. Details instructions for maintaining compliance are give in the User Manual. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. The EUT is comply with 2.1091 SAR testing. RF exposure is addressed in the SAR report. Best regards, _______________________________ Vincent Hsieh Getac Technology Corp.

091010 – 5 Request for Confidentiality Date: 07/25/2012 Subject: Confidentiality Request for: _ (MAU046)______ Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 10, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Exhibit Short Term PermanentBlock Diagrams Short Term External Photos Short Term Permanent* 2 Internal Photos Short Term Permanent Operation Description/Theory of Operation Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term Permanent* User’s Manual *Note: ______(Insert Explanation as Necessary)______ ______( Getac Technology Corp.)______ has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality: The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality: The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of ___(specify number of days not to exceed 180 ) 3 ___ days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications: The applicant understands that until such time that IC distinguishes between Short Term and Permanent Confidentiality, either type of marked exhibit above will simply be marked Confidential when submitted to IC. Sincerely, By: __________________________ ____ Vincent Hsieh ______________ (Signature/Title 4 ) (Print name) 2 - The asterisked items (*) require further justification before permanent confidentiality will be allowed. These also currently require review by the FCC under their Permit-But-Ask policy before the grant is issued and can delay completion of an application. Further justification should be added to the note above. One such example for a potted device would be: “The EUT is FULLY potted using a non-removable epoxy based material. Removal of potting material causes irreparable damage to internal circuitry. See photographs exhibits that outline the device before and after potting.” 3 - Please refer to http://atcb.com/publicdocs/Memo-Short-Term-Vs-Standard-Confidentiality.pdf for complete details. 4 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate

Re: Applicant: Getac Technology Corp. FCC ID: MAU046 1) Request New Limited Modular Approval with Rugged Notebook Host PC (Model: V100-G4 and V200-G2 ) for embedded Intel Corporation module FCC ID: PD96235ANH. 2) Reuse OEM conducted test data of FCC ID: PD96235ANH 3) Add co-location with the WWAN module FCC ID: N7NMC8355 embedded in the same Rugged Notebook Host PC (Model: V100-G4 and V200-G2 ). We request a new Limited Modular Approval for an unlicensed radio module. The radio was original certified by Intel Corporation under FCC ID: PD96235ANH. The Getac Technology Corp. FCC ID is MAU046. The radio will be used in the Getac Rugged Notebook Host PC (Model: V100-G4 and V200-G2 ). We reference Intel Corporation Limited Single Modular Certification test report, Part 15C, 15E Conducted Test Report: R84671, R84672 and R84673 and DFS Test Report: R84674 First Release for all of the OEM conducted and DFS test data. We also request that this certification includes co-location in the host with the above referenced certified module FCC ID: MAU047. An exhibit addressing RF Exposure specific to this application in the host (Model: V100-G4 and V200-G2 ) with the FCC ID: MAU046 and FCC ID: MAU047 accompanies this request for Certification. The new Out of Band Emissions and Field Strength and/or ERP/EIRP measurements made by International Standards Laboratory (ISL) in test report: ISL-12LR098 cover the integration of the FCC ID:MAU046 module into the Getac Rugged Notebook Host PC (Model: V100-G4 and V200-G2) with its internal PIFA antenna and the gain of 2.6 dBi for 2.4G and 3.97dBi for 5GHz. The WWAN and WIFI/BT Module is built-in to Notebook Host PC this is can’t simultaneously transmit. Please let me know if you should require any further information. the host PC(V100-G4 and V200-G2) is only panel size different(V100 = 10" V200=12")for antenna location / device depth / module location / CPU board of Layout and component is all same and the antenna location not cover to LCD panel and shall be pretest both host and choose worst host to final test Best Regards, Vincent Hsieh Getac Technology Corp. [email protected] TEL: 886-2-27857888 FAX: 886-2-26525845

091010 – 5 Authority to Act as Agent Date: 07/25/2012 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern: ______( International Standards Laboratory)______ is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Expiration Date: _____(Typically 8 – 12 months)_____ By: __________________________ ____ Vincent Hsieh _ ___ (Signature 1 ) (Print name) Title: ____ Senior Engineer ____ On behalf of: ___ Getac Technology Corp. __ (Company Name) Telephone: __886-02-2785-7888 ________________________ 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB EXTERNAL PHOTOGRPHS OF EUT FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB EUT – 1 EUT – 2 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB External of Host – 1 External of Host – 2 (V100) FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB External of Host – 3 (V200) External of Host – 4 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB External of Host – 5 External of Host – 6 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB External of Host – 7 External of Host – 8 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB External of Host – 9

V100/ V200 model labeling R01 • Vincent Hsieh 2012/07/26 V100 labeling P2 Copyright © Mitac Technology Corp. 2009<Presenter> <Project> <mm/dd/yyyy> V200 labeling P3 Copyright © Mitac Technology Corp. 2009<Presenter> <Project> <mm/dd/yyyy>

WIFI MODULE

FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB INTERNAL PHOTOGRPHS OF EUT FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Open View of Host – 1 Internal View of Host – 1 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Internal View of Host – 2 Internal View of Host – 5 (V100) WWAN main WWAN aux WLAN, BT aux WLAN, BT main FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Internal View of Host – 6 (V200) Internal View of WWAN Antenna (MAIN) FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Internal View of WWAN Antenna (AUX) Internal View of WLAN, BT Antenna (MAIN) FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Internal View of WLAN, BT Antenna (AUX) EUT – 1 FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB EUT – 2 EUT – 2

Page: 1 of 38 TEST REPORT of FCC Part 15 Subpart C New Application; Class I PC; Class II PC Limited Modular Approval for Notebook Model V100-G4/V200-G2 Product : Wireless LAN Module Brand: N/A Model: Advanced-N 6235 Model Difference: N/A FCC ID: MAU046 FCC Rule Part: §15.247, Cat: DSS Applicant: Getac Technology Corporation Address: 5F., Building A, No. 209, Sec. 1, Nangang Rd., Nangang Dist., Taipei City 11568, Taiwan, R.O.C. Test Performed by: International Standards Laboratory <Lung-Tan LAB> *Site Registration No. BSMI: SL2-IN-E-0013; MRA TW1036; TAF: 0997; IC4067B-3; *Address: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan *Tel : 886-3-407-1718; Fax: 886-3-407-1738 Report No.: ISL-12LR098FCB Issue Date : 2012/07/16 Test results given in this report apply only to the specific sample(s) tested and are traceable to na- tional or international standard through calibra- tion of the equipment and evaluating measure- ment uncertainty herein. This report MUST not be used to claim product endorsement by TAF, NVLAP or any agency of the Government. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory. -2 of 38- FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB VERIFICATION OF COMPLIANCE Applicant: Getac Technology Corporation Product Description: Wireless LAN Module Brand Name: N/A Model No.: Advanced-N 6235 Model Difference: N/A FCC ID: MAU046 FCC Rule Part: §15.247 Date of test: 2012/05/16 ~ 2012/06/28 Date of EUT Received: 2012/05/16 We hereby certify that: All the tests in this report have been performed and recorded in accordance with the standards de- scribed above and performed by an independent electromagnetic compatibility consultant, Interna- tional Standards Laboratory. The test results contained in this report accurately represent the measurements of the characteristics and the energy generated by sample equipment under test at the time of the test. The sample equip- ment tested as described in this report is in compliance with the limits of above standards. Test By: Date: 2012/07/16 Dion Chang / Engineer Prepared By: Date: 2012/07/16 Eva Kao / Technical Supervisor Approved By: Date: 2012/07/16 Vincent Su / Technical Manager -3 of 38- FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Version Version No. Date Description 00 2012/07/16 Initial creation of document -4 of 38- FCC ID: MAU046 International Standards Laboratory Report Number: ISL-12LR098FCB Table of Contents 1. GENERAL INFORMATION .................................................................................................... 6 1.1. Product Description ....................................................................................................................... 6 1.2. Related Submittal(s) / Grant (s) ..................................................................................................... 8 1.3. Test Methodology .......................................................................................................................... 8 1.4. Test Facility .................................................................................................................................... 8 1.5. Special Accessories ........................................................................................................................ 8 1.6. Equipment Modifications ............................................................................................................... 8 2. SYSTEM TEST CONFIGURATION ....................................................................................... 9 2.1. EUT Configuration ........................................................................................................................ 9 2.2. EUT Exercise ................................................................................................................................. 9 2.3. Test Procedure ................................................................................................................................ 9 2.4. Configuration of Tested System ................................................................................................... 10 3. SUMMARY OF TEST RESULTS .......................................................................................... 11 4. DESCRIPTION OF TEST MODES ....................................................................................... 11 5. AC POWER LINE CONDUCTED EMISSION TEST ......................................................... 12 5.1. Standard Applicable: .................................................................................................................... 12 5.2. Measurement Equipment Used: ................................................................................................... 12 5.3. EUT Setup: ................................................................................................................................... 12 5.4. Measurement Procedure: ............................................................................................................. 13 5.5. Measurement Result: ................................................................................................................... 13 6. PEAK OUTPUT POWER MEASUREMENT ....................................................................... 16 6.1. Standard Applicable: .................................................................................................................... 16 6.2. Measurement Equipment Used: ................................................................................................... 16 6.3. .Test Set-up: ................................................................................................................................. 17 6.4. Measurement Procedure: ...................................................................…

Text truncated - open the document above for the full version.

File: R84673 Page 1 EMC Test Report Application for Grant of Equipment Authorization Industry Canada RSS-Gen Issue 2 / RSS 210 Issue 7 FCC Part 15 Subpart C Intel Centrino Advanced-N 6235, models 6235ANHMW and 6235ANHU IC CERTIFICATION #: 1000M-6235ANH and 1000M-6235ANHU FCC ID: PD96235ANH and PD96235ANHU APPLICANT: Intel Corporation 100 Center Point Circle Suite 200 Columbia, SC 29210 TEST SITE(S): Elliott Laboratories 41039 Boyce Road. Fremont, CA. 94538-2435 IC SITE REGISTRATION #: 2845B-4, 2845B-7 REPORT DATE: September 27, 2011 FINAL TEST DATES: September 20, 21, 28, and 30, 2010 TOTAL NUMBER OF PAGES: 85 PROGRAM MGR / QUALITY ASSURANCE DELEGATE / TECHNICAL REVIEWER: FINAL REPORT PREPARER: ______________________________ ______________________________ David W. Bare David Guidotti Chief Engineer Senior Technical Writer Elliott Laboratories is accredited by the A2LA, certificate number 2016.01, to perform the test(s) listed in this report, except where noted otherwise. This report and the information contained herein represent the results of testing test articles identified and selected by the client performed to specifications and/or procedures selected by the client. National Technical Systems (NTS) makes no representations, expressed or implied, that such testing is adequate (or inadequate) to demonstrate efficiency, performance, reliability, or any other characteristic of the articles being tested, or similar products. This report should not be relied upon as an endorsement or certification by NTS of the equipment tested, nor does it represent any statement whatsoever as to its merchantability or fitness of the test article, or similar products, for a particular purpose. This report shall not be reproduced except in full Elliott Laboratories -- EMC Department Test Report Report Date: September 27, 2011 File: R84673 Page 2 REVISION HISTORY Rev# Date Comments Modified By - 09-27-2011 First release Elliott Laboratories -- EMC Department Test Report Report Date: September 27, 2011 File: R84673 Page 3 TABLE OF CONTENTS REVISION HISTORY ................................................................................................................................................2 TABLE OF CONTENTS ............................................................................................................................................3 SCOPE..........................................................................................................................................................................4 OBJECTIVE ................................................................................................................................................................4 STATEMENT OF COMPLIANCE...........................................................................................................................5 DEVIATIONS FROM THE STANDARDS ..............................................................................................................5 TEST RESULTS SUMMARY ...................................................................................................................................6 FREQUENCY HOPPING SPREAD SPECTRUM (2400 – 2483.5 MHZ, LESS THAN 75 CHANNELS) ................6 GENERAL REQUIREMENTS APPLICABLE TO ALL BANDS..........................................................................6 ADDITIONAL MEASUREMENTS ........................................................................................................................7 MEASUREMENT UNCERTAINTIES .....................................................................................................................7 EQUIPMENT UNDER TEST (EUT) DETAILS ......................................................................................................8 GENERAL................................................................................................................................................................8 ANTENNA SYSTEM ..............................................................................................................................................8 ENCLOSURE...........................................................................................................................................................8 MODIFICATIONS...................................................................................................................................................8 SUPPORT EQUIPMENT.........................................................................................................................................9 EUT INTERFACE PORTS ......................................................................................................................................9 EUT OPERATION ...................................................................................................................................................9 TEST SITE..................................................................................…

Text truncated - open the document above for the full version.