MAU050LTE Module

Date:2012-11-22 Subject: WWAN Declaration Compliance Letter FCC ID: MAU050 To whom it may concern, We, the undersigned, hereby certify that we responsible to comply with the FCC relevant provisions. The FCC ID: MAU050, model: LTE7750 1. This application of the device is only apply and limited in WWAN host device approval. In the future if it has other RF function, will apply the related certifications. 2. This device operating modes the LTE7750 employs are limited to those reported for this submission (CDMA2000: 1xRTT, 1xEVDO, LTE B13: QPSK, 16QAM). Other function will be disabled by software. If you have any question regarding this authorization, please do not hesitate to contact us.

Getac Technology Corp. Date (24/10/2012) BABT TCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Confidentiality Request FCC ID: MAU050 Pursuant to Sections 0.457(d)(1)(ii) and 0.459 of the Commission’s Rules, Getac Technology Corp. hereby requests permanent confidential treatment of information accompanying this application as outlined below: Common exhibits for which confidentiality is requested are: Schematics Block Diagrams Theory of Operation The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the Applicant and provide unjustified benefits to its competitors. The Applicant understands that pursuant to Rule 0.457(d)(1)(ii), disclosure of this Application and all accompanying materials will not be made before the date of the Grant for this Application. Yours sincerely, Company Officer: Vincent Hsieh Telephone Number: 886-2-27857888 Email: [email protected]

Example of Agents letter (for TCB – TCB approval): Getac Technology Corp. Date (24/10/2012) BABT FCB Forsyth House, Churchfield Road, Walton-on-Thames, Surrey, KT12 2TD Dear Sir or Madam, We, Getac Technology Corp., hereby authorize Compliance Certification Services Inc. / David Wang. to act as our agent in all matters relating to applications for equipment authorization, including the signing of all documents relating to these matters. This authorization expires on 30/4/2013 Sincerely, Company Officer: Vincent Hsieh Telephone Number: 886-2-27857888 Email: [email protected]

Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 1 Total Page: 26 APPENDIX 1 - PHOTOGRAPHS OF EUT EXTERNAL PHOTOGRAPHS OF EUT V100 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 2 Total Page: 26 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 3 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 4 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 5 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 6 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 7 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 8 Power Adapter For ADM-6019M Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 9 Power Adapter For ADM-9019M-GTK Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 10 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 11 Power Adapter For FSP090-DMBB1 Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 11, 2012 A1 - 12 / 26 Rev. 00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 13 Total Page: 26 Rev.00 V200 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 14 Total Page: 26 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 15 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 16 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 17 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 18 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 19 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 20 Rev.00 Power Adapter For ADM-6019M Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 21 Rev.00 Power Adapter For ADM-9019M-GTK Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 22 Rev.00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 23 Rev.00 Power Adapter For FSP090-DMBB1 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 24 Rev. 00

Compliance Certification Services Inc. Report No.: T121008S01 Date of Issue: October 15, 2012 A1 - 1 Total Page: 1 EXTERNAL PHOTOGRAPHS OF THE MODULE

V100/ V200 model labeling R01 • Vincent Hsieh 2012/10/20 V100 labeling P2 Copyright © Mitac Technology Corp. 2009<Presenter> <Project> <mm/dd/yyyy> V200 labeling P3 Copyright © Mitac Technology Corp. 2009<Presenter> <Project> <mm/dd/yyyy>

Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 25 Rev. 00 INTERNAL PHOTOGRAPHS OF EUT Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 26 Rev. 00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 27 Rev. 00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 28 Rev. 00 Compliance Certification Services Inc. Report No.: T120823S01 Date of Issue: October 15, 2012 A1 - 29 Rev. 00

Date/Time: 2012/9/22 10:12:58 PM Test Laboratory: Compliance Certification Services Inc. System check_ MSL750_20120922 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 750 MHz; σ = 0.935 mho/m; ε r = 54.892; ρ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: Probe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; Sensor-Surface: 4mm (Mechanical Surface Detection), Sensor-Surface: 0mm (Fix Surface) Electronics: DAE4 Sn877; Calibrated: 2012/3/16 Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 Measurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW,d=15mm/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.18 mW/g Configuration/Pin=250mW,d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 48.492 V/m; Power Drift = -0.05 dB Peak SAR (extrapolated) = 2.971 mW/g SAR(1 g) = 2.15 mW/g; SAR(10 g) = 1.42 mW/g Maximum value of SAR (measured) = 2.17 mW/g Configuration/Pin=250mW,d=15mm/Z Scan (1x1x11): Measurement grid: dx=20mm, dy=20mm, dz=10mm Maximum value of SAR (measured) = 2.16 mW/g Date/Time: 2012/9/27 10:00:38 AM Test Laboratory: Compliance Certification Services Inc. System check_ MSL835_20120927 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 835 MHz; σ = 0.982 mho/m; ε r = 55.28; ρ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: Probe: EX3DV4 - SN3665; ConvF(9.69, 9.69, 9.69); Calibrated: 2012/4/27; Sensor-Surface: 4mm (Mechanical Surface Detection) Electronics: DAE4 Sn877; Calibrated: 2012/3/16 Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 Measurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW,d=15mm/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.30 mW/g Configuration/Pin=250mW,d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 53.685 V/m; Power Drift = 0.075 dB Peak SAR (extrapolated) = 3.322 mW/g SAR(1 g) = 2.3 mW/g; SAR(10 g) = 1.49 mW/g Maximum value of SAR (measured) = 2.32 mW/g Date/Time: 2012/9/27 02:43:24 PM Test Laboratory: Compliance Certification Services Inc. System check 20120927_BSL1900 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.56 mho/m; ε r = 53.19; ρ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY4 Configuration: lProbe: EX3DV4 - SN3554; ConvF(6.33, 6.33, 6.33); lSensor-Surface: 2.5mm (Mechanical Surface Detection) lElectronics: DAE4 Sn558; Calibrated: 2012/7/19 lPhantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN: 1052 lMeasurement SW: DASY4, V4.7 Build 80; Postprocessing SW: SEMCAD, V1.8 Build 186 Pin=250mW, d=10mm/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 18 mW/g Pin=250mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 99.3 V/m; Power Drift = -0.064 dB Peak SAR (extrapolated) = 28 W/kg SAR(1 g) = 10 mW/g; SAR(10 g) = 5.15 mW/g Maximum value of SAR (measured) = 18.3 mW/g Pin=250mW, d=10mm/Z Scan (1x1x11): Measurement grid: dx=20mm, dy=20mm, dz=10mm Maximum value of SAR (measured) = 18.2 mW/g Date/Time: 2012/9/25 09:57:58 AM Test Laboratory: Compliance Certification Services Inc. System check_ MSL750_20120925 Communication System: CW; Frequency: 750 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 750 MHz; σ = 0.935 mho/m; ε r = 54.892; ρ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: Probe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; Sensor-Surface: 2.5mm (Mechanical Surface Detection), Sensor-Surface: 0mm (Fix Surface) Electronics: DAE4 Sn877; Calibrated: 2012/3/16 Phantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 Measurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) Configuration/Pin=250mW,d=15mm/Area Scan (7x13x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 2.22 mW/g Configuration/Pin=250mW,d=15mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 50.113 V/m; Power Drift = -0.110 dB Peak SAR (extrapolated) = 3.012 mW/g SAR(1 g) = 2.11 mW/g; SAR(10 g) = 1.35 mW/g Maximum value of SAR (measured) = 2.18 mW/g Configuration/Pin=250mW,d=15mm/Z Scan (1x1x11): Measurement grid: dx=20mm, dy=20mm, dz=10mm Maximum value of SAR (measured) = 2.18 mW/g

Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-SF Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 38 Rev. 01 ANSI/IEEE Std. C95.1-1992 in accordance with the requirements of FCC Report and Order: ET Docket 93-62, and OET Bulletin 65 Supplement C FCC TEST REPORT For LTE Module Trade Name: Getac Model: LTE7750 Issued to Getac Technology Corp. 4F, No.1, R&D 2nd Road, Hsin-Chu Science-Based Industrial Park, Hsin-Chu Hsien, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No. 11, Wugong 6th Rd., Wugu Industrial Park, Taipei Hsien 248, Taiwan. http://www.ccsrf.com [email protected]. Issued Date: October 11, 2012 Compliance Certification Services Inc. Report No.: T121008S01-SF Page 2 Rev. 01 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 October 11, 2012 Initial Issue ALL Anson Lu 01 November 15, 2012 Revised Attachments item 2 and 8 Page 38 Anson Lu Compliance Certification Services Inc. Report No.: T121008S01-SF Page 3 Rev. 01 TABLE OF CONTENTS 1 CERTIFICATE OF COMPLIANCE (SAR EVALUATION) ................................... 4 2 EQUIPMENT UNDER TEST ....................................................................................... 5 2.1 KDB941225 D05 SAR for LTE Devices.............................................................. 7 2.2 Description Of Antenna...................................................................................... 10 2.3 Simultaneous Transmission Conditions............................................................ 10 3 EQUIPMENT LIST & CALIBRATION STATUS ................................................... 11 4 REQUIREMENTS FOR COMPLIANCE TESTING DEFINED BY THE FCC .. 12 5 DOSIMETRIC ASSESSMENT SYSTEM ................................................................. 12 5.1 Measurement System Diagram.......................................................................... 13 5.2 System Components............................................................................................ 14 6 EVALUATION PROCEDURES................................................................................. 17 7 MEASUREMENT UNCERTAINTY ......................................................................... 21 8 EXPOSURE LIMIT ..................................................................................................... 23 9 RF OUTPUT POWER MEASUREMENT ................................................................ 24 9.1 LTE Band 13....................................................................................................... 24 9.2 CDMA Cellular / PCS Band.............................................................................. 25 10 TISSUE DIELECTRIC PROPERTIES ..................................................................... 26 10.1 Typical Composition of Ingredients for Liquid Tissue Phantoms................. 26 10.2 Simulating Liquids Parameter Check Results................................................. 27 11 SYSTEM PERFORMANCE CHECK........................................................................ 29 11.1 System Performance Check Measurement Conditions................................... 29 12 SAR MEASUREMENTS RESULTS.......................................................................... 31 12.1 LTE Band 13 V100 SAR Test Result:............................................................... 31 12.2 LTE Band 13 V200 SAR Test Result:............................................................... 32 12.3 EVDO Rev.0 V100 SAR Test Result................................................................. 33 12.4 EVDO Rev.0 V200 SAR Test Result................................................................. 33 13 SIMULTANEOUS TRANSMISSION SAR ANALYSIS.......................................... 34 14 SETUP DIAGRAM ...................................................................................................... 35 15 ANTENNA LOCATION AND SEPARATION DISTANCE ................................... 36 16 FACILITIES ................................................................................................................. 37 17 REFERENCES ............................................................................................................. 37 18 ATTACHMENTS ......................................................................................................... 38 Compliance Certification Services Inc. Report No.: T121008S01-SF Page 4 Rev. 01 1 Certificate of Compliance (SAR Evaluation) Applicant: Getac Technology Corp. Equipment Under Test: LTE Module Trade Name: Getac Model Number: LTE7750 Date of Test: September 22 ~ September 27, 2012 Device Category: PORTABLE DEVICES Exposure Category: GENERAL POPULATION/UNCONTROLLED EXPOSURE APPLICABLE STANDARDS FCC z FCC OET 65 Supplement C z IEEE 1528 2003 z KDB 447498 D01 Mobile Portable RF Exposure V04 ,Published on Nov 16 2009 z KDB 941225 SAR for LTE Devices DR05-41164 z KDB 941225 D01 SAR test for 3G devices v02 z KDB 388624 Permit But Ask DR02 TEST RESULTS Pass The device was tested by Compliance Certification Services Inc. in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C (Edition 01-01). The test results in this report apply only to the tested sample of the stated device/equipment. Other similar device/equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved by: Tested by: Alex Wu Anson Lu Section Manager Test Engineer Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. Report No.: T121008S01-SF Page 5 Rev. 01 2 Equipment under test Product LTE Module Trade Name Getac Model Number LT…

Text truncated - open the document above for the full version.

Date/Time: 2012/9/22 11:05:21 AM Test Laboratory: Compliance Certification Services Inc. /7(%DQG&+436.5%6WDUW0B(GJH Communication System: LTE Band13; Frequency: 782 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; ı = 0.97 mho/m; İ r = 54.602; ȡ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: zProbe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; zSensor-Surface: 1.4mm (Mechanical Surface Detection) zElectronics: DAE4 Sn877; Calibrated: 2012/3/16 zPhantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 zMeasurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) (GJH0LGGOH&K05%6WDUW436.$UHD6FDQ [[  Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0603 mW/g (GJH0LGGOH&K05%6WDUW436.=RRP6FDQ [[ &XEH Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 3.589 V/m; Power Drift = 0.08 dB Peak SAR (extrapolated) = 0.077 mW/g 6$5 J   P:J6$5 J  P:J Maximum value of SAR (measured) = 0.0627 mW/g Date/Time: 2012/9/2207:47:16PM Test Laboratory: Compliance Certification Services Inc. /7(%DQG&+436.5%6WDUW0B(GJH Communication System: LTE Band13; Frequency: 782 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; ı = 0.97 mho/m; İ r = 54.602; ȡ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: zProbe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; zSensor-Surface: 1.4mm (Mechanical Surface Detection) zElectronics: DAE4 Sn877; Calibrated: 2012/3/16 zPhantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 zMeasurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) (GJH0LGGOH&K05%6WDUW436.$UHD6FDQ [[  Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0714 mW/g (GJH0LGGOH&K05%6WDUW436.=RRP6FDQ [[ &XEH Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.060 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.090 mW/g 6$5 J   P:J6$5 J  P:J Maximum value of SAR (measured) = 0.0732 mW/g (GJH0LGGOH&K05%6WDUW436.=RRP6FDQ [[ &XEH Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 5.060 V/m; Power Drift = 0.07 dB Peak SAR (extrapolated) = 0.096 mW/g 6$5 J   P:J6$5 J  P:J Maximum value of SAR (measured) = 0.0630 mW/g Date/Time: 2012/9/22 09:08:03PM Test Laboratory: Compliance Certification Services Inc. /7(%DQG&+436.5%6WDUW0B(GJH Communication System: LTE Band13; Frequency: 782 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; ı = 0.97 mho/m; İ r = 54.602; ȡ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: zProbe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; zSensor-Surface: 1.4mm (Mechanical Surface Detection) zElectronics: DAE4 Sn877; Calibrated: 2012/3/16 zPhantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 zMeasurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) (GJH0LGGOH&K05%6WDUW436.$UHD6FDQ [[  Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0734 mW/g (GJH0LGGOH&K05%6WDUW436.=RRP6FDQ [[ &XEH Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.609 V/m; Power Drift = -0.061 dB Peak SAR (extrapolated) = 0.098 mW/g 6$5 J   P:J6$5 J  P:J Maximum value of SAR (measured) = 0.0805 mW/g Date/Time: 2012/9/22 10:15:12PM Test Laboratory: Compliance Certification Services Inc. /7(%DQG&+436.5%6WDUW0B(GJH Communication System: LTE Band13; Frequency: 782 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; ı = 0.97 mho/m; İ r = 54.602; ȡ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: zProbe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; zSensor-Surface: 1.4mm (Mechanical Surface Detection) zElectronics: DAE4 Sn877; Calibrated: 2012/3/16 zPhantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 zMeasurement SW: DASY52, Version 52.8 (1)SEMCAD X Version 14.6.5 (6469) (GJH0LGGOH&K05%6WDUW436.$UHD6FDQ [[  Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.0776 mW/g (GJH0LGGOH&K05%6WDUW436.=RRP6FDQ [[ &XEH Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 4.471 V/m; Power Drift = -0.10 dB Peak SAR (extrapolated) = 0.104 mW/g 6$5 J   P:J6$5 J  P:J Maximum value of SAR (measured) = 0.0848 mW/g Date/Time: 2012/9/22 11:24:49PM Test Laboratory: Compliance Certification Services Inc. /7(%DQG&+436.5%6WDUW0B(GJH Communication System: LTE Band13; Frequency: 782 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 782 MHz; ı = 0.97 mho/m; İ r = 54.602; ȡ = 1000 kg/m 3 Phantom section: Flat Section Air Temperature:24.2 deg C;Liquid Temperature:23.2 deg C Area Scan Find Secondary Maximum Within 2dB and with a peak SAR value greater than 0.0012W/kg DASY Configuration: zProbe: EX3DV4 - SN3665; ConvF(9.9, 9.9, 9.9); Calibrated: 2012/4/27; zSensor-Surface: 1.4mm (Mechanical Surface Detection) zElectronics: DAE4 Sn877; Calibrated: 2012/3/16 zPhantom: ELI 4.0; Type: QDOVA001BA; Serial: 1056 zMeasurement SW: DASY52, Version 52.8 (1)SEMCAD X…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP2 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 67 Rev.00 FCC TEST REPORT and IC TEST REPORT For LTE Module Model: LTE7750 Trade Name: Getac Issued to Getac Technology Corp. 4F, No.1, R&D 2nd Road, Hsin-Chu Science-Based Industrial Park, Hsin-Chu Hsien, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wu-Gong 6th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan (R.O.C.) http://www.ccsrf.com [email protected] Issued Date: October 11, 2012 Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP2 Page 2 Rev. 00 Revision History Rev. Issue Date Revisions Effect Page Revised By 00 October 11, 2012 Initial Issue ALL Gina Lo Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP2 Page 3 Rev. 00 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION ................................................................................................ 4 2. EUT DESCRIPTION ........................................................................................................................ 5 3. TEST METHODOLOGY................................................................................................................. 6 3.1 DESCRIPTION OF TEST TYPE ....................................................................................................... 6 4. INSTRUMENT CALIBRATION .................................................................................................... 7 4.1 MEASURING INSTRUMENT CALIBRATION .............................................................................. 7 4.2 MEASUREMENT EQUIPMENT USED ........................................................................................... 7 4.3 MEASUREMENT UNCERTAINTY ................................................................................................. 8 5. FACILITIES AND ACCREDITATIONS....................................................................................... 9 5.1 FACILITIES........................................................................................................................................ 9 5.2 EQUIPMENT...................................................................................................................................... 9 5.3 TABLE OF ACCREDITATIONS AND LISTINGS ........................................................................ 10 6. SETUP OF EQUIPMENT UNDER TEST ................................................................................... 11 6.1 SETUP CONFIGURATION OF EUT .............................................................................................. 11 6.2 SUPPORT EQUIPMENT ................................................................................................................. 11 7. TEST PROCEDURE AND RESULT............................................................................................ 12 7.1 OUTPUT POWER MEASUREMENT ............................................................................................. 12 7.2 FREQUENCY STABILITY MEASUREMENT .............................................................................. 19 7.3 OCCUPIED BANDWIDTH MEASUREMENT .............................................................................. 22 7.4 PEAK TO AVERAGE RATIO ......................................................................................................... 26 7.5 BAND EDGE MEASUREMENT..................................................................................................... 30 7.6 CONDUCTED SPURIOUS EMISSIONS ........................................................................................ 46 7.7 RADIATED EMISSION MEASUREMENT ................................................................................... 49 APPENDIX I PHOTOGRAPHS OF TEST SETUP ................................................................................. 66 Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP2 Page 4 Rev. 00 1. TEST RESULT CERTIFICATION Applicant: Getac Technology Corp. 4F, No.1, R&D 2nd Road, Hsin-Chu Science-Based Industrial Park, Hsin-Chu Hsien, Taiwan, R.O.C. Equipment Under Test: LT E M o d u l e Tr a d e N a m e : Getac Model: LT E 7 7 5 0 Date of Test: September 26 ~ October 1, 2012 FCC PART 27, SUBPART C, L, FCC PART 2 OPERATING BAND: 782.00 MHz Standard TEST TYPE AND LIMIT 2.1046 27.50(C)(10) Maximum Peak Output Power Limit: max. 3 watts e.r.p peak power 2.1055 27.54 Frequency Stability 2.1049 27.53(g) Occupied Bandwidth 27.50(d)(5) Peak to average ratio 27.53(g) Band Edge Measurements 2.1051 27.53(g) Conducted Spurious Emissions 2.1053 27.53(g) Radiated Spurious Emissions Note: 1. The test result judgment is decided by the limit of test standard 2. The information of measurement uncertainty is available upon the customer’s request. Deviation from Applicable Standard None The above equipment has been tested by Compliance Certification Services Inc., and found compliance with the requirements set forth in the technical standards mentioned above. The results of testing in this report apply only to the product/system, which was tested. Other similar equipment will not necessarily produce the same results due to production tolerance and measurement uncertainties. Approved by Reviewed by Miller Lee Gina Lo Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP2 Page 5 Rev. 00 2. EUT DESCRIPTION Product LTE Module Model Number LTE7750 Model Discrepancy N/A Tr a d e Getac Received Date September 26, 2012 Power Source Powered by host dev…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. FCC ID: MAU050 Report No.: T121008S01-RP1 Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 / 99 FCC 47 CFR PART 22 SUBPART H AND PART 24 SUBPART E TEST REPORT For LTE Module Trade Name: Getac Model: LTE7750 Issued to Getac Technology Corp. 4F, No.1, R&D 2nd Road, Hsin-Chu Science-Based Industrial Park, Hsin-Chu Hsien, Taiwan, R.O.C. Issued by Compliance Certification Services Inc. No.11, Wu-Gong 6th Rd., Wugu Industrial Park, New Taipei City 248, Taiwan (R.O.C.)…

Text truncated - open the document above for the full version.