MAU1011Rugged Wireless Keyboard

Getac Technology Corp.

Click to zoom

Application Details

Equipment Class: JBP - Part 15 Class B Computing Device Peripheral
Date of Grant: May 26, 2003
Application Purpose: Original Equipment
Date of Application: May 26, 2003
Equipment Note: Rugged Wireless Keyboard
Company: Getac Technology Corp.
Country: Taiwan

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Rugged Wireless Keyboard User Guide April 23, 2003 P/N:799001200026 R00 Table of contents 1.0 Introduction ....................................................... 1 1.1 RED LED .......................................................... 2 1.2 DIP Switch......................................................... 2 2.0 Technical Specification ..................................... 3 2.1 Using the Rugged Wireless Keyboard............... 3 2.2 Function Key and Indicator ............................... 4 Figure of Contents Figure 1 Turn on the Switch .................................... 1 Figure 2 Indicator of the Rugged Wireless Keyboard ................................................................... 5 Regulations Information Class B Regulations USA Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: − Reorient or relocate the receiving antenna. − Increase the separation between the equipment and receiver. − Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. − Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Please note: The use of a non-shielded interface cable with this equipment is prohibited. Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édicté par le ministère des Communications du Canada. Rev.00 799001200026 1 1.0 Introduction This user guide provides information about the use of the Rugged Wireless keyboard. Note Before using the optional keyboard for the first time, slide the switch located inside the power jack port to the “on” position. The power jack port is found on the right side of the wireless keyboard. (See figure 1) ON Figure 1 Turn on the Switch Display battery power percentage Push Rev.00 799001200026 2 1.1 RED LED Red LED display the percent of the battery power, when pressing the push button, each LED shows the 25% power. If power range fall in 75%-100%, then four LEDS will be on. 1.2 Dip Switch The power jack port has four switches. The sequence from left to right is battery switch, wake up switch, sleep switch and power switch. They match to buttons on the keyboard, so we can enable/disable the button by setting switch off/on. RED LED Push Switch Rev.00 799001200026 3 2.0 Technical Specification Dimension 325.7 X 174.8 X 27.5mm Weight 1.3Kg Number of Keys 87 Key Battery life 15 hours ( keep backlight on ) AC Adaptor Input:110-240V, 50/60Hz, 1.0A max. Output: 12V, 1.5A max. IO port IR port 2.1 Using the Rugged Wireless Keyboard Place the wireless keyboard in front of the Tablet PC with no obstructions between them to allow unhampered communication between the computer and keyboard’s IR port. Rev.00 799001200026 4 2.2 Function Keys & Indicator 1. Left Button: Left button of the mouse. 2. Right Button: Right button of the mouse. 3. Backlight Key: When the user presses the backlight key, the backlight will be set on or off . Once the keyboard backlight turn on and the user doesn’t operate keyboard for about thirty seconds, the backlight will automatic turn off, user can press any key or backlight key to turn on again. 4. Power: When press the power button under Windows use, the system will power off. ( only for Windows 2000, Windows XP) 5. Sleep: When press the sleep button, the system will enter sleep mode. (only for windows OS) 6. Wake: When the system enter sleep mode, press the wake up button under Windows use, the system will wake up.( only for windows OS) Rev.00 799001200026 5 7. CHARGE LED: Green: In Charge Turn off: Full Charge (If connected to the AC-IN.) 8. Battery LED: This led is Yellow . When battery power is less then 5% power, the led is blink. When the led is on, ( not blink anymore), the backlight will be off automatically, that mean the battery power is about 0%, and user need to connect to adapter immediately. 9. FSR: Serves as the pointing device of the rugged wireless keyboard. Figure 2 Indicator of the Rugged Wireless Keyboard BACK- LIGHT POWERSLEEP WAKE GETAC n op qrs tu v

Block Diagram

External Photos

Report No.: 034H046F Page : 1 of 12 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

ID Label/Location Info

FCC ID.: MAU1011 No. 1, R&D Road 2, Hsinchu Science-Based Industrial Park, Taiwan, R.O.C. Tel: 886-3-578-2280 Fax: 886-3-577-4034 FCC ID AND DoC Label The FCC ID and DoC Label will be placed on the equipment as shown in the photograph below. Rugged Wireless Keyboard Model No.: RKB MITAC TESTED TO COMPLY WITH FCC STANDARDS FOR HOME OR OFFICE USE S/N: Made in Taiwan Rugged Wireless Keyboard Model No.: RKB F F C C C C I I D D : : M M A A U U 1 1 0 0 1 1 1 1 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

ID Label/Location Info

Internal Photos

Report No.: 034H046F Page : 2 of 12 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 034H046F Page : 3 of 12 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 034H046F Page : 4 of 12 Version:1.0 (7) EUT Photo (8) EUT Photo Report No.: 034H046F Page : 5 of 12 Version:1.0 (9) EUT Photo (10) EUT Photo Report No.: 034H046F Page : 6 of 12 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 034H046F Page : 7 of 12 Version:1.0 (13) EUT Photo (14) EUT Photo Report No.: 034H046F Page : 8 of 12 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 034H046F Page : 9 of 12 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 034H046F Page : 10 of 12 Version:1.0 (19) EUT Photo (20) EUT Photo Report No.: 034H046F Page : 11 of 12 Version:1.0 (21) EUT Photo Report No.: 034H046F Page : 12 of 12 Version:1.0 (22) EUT Photo

Schematics

A A B B 22 11 Contexts Title Page 2 3 Cover Sheet1 History of Schematics Revision 00 (EVT) DRAWDESIGNCHECKISSUED MODEL : IP52 KeyboardRevision 01 IP52 Keyboard Block Diagram B TOPVIEW G SOT23 PKG SOT23 PKG TOPVIEW A1 C K K2 TOPVIEW A SOT23 PKG K1A2 SOT23 PKG DTC144WK S BAV99 SI2301DS RE D DAN212K SOT23 PKG K TOPVIEW SI2303DS TOPVIEW 2N7002 SCK431LCSK-.5 AX PCB;PWA-CA25,IP52 KB FNKEY BD 316-1200-00026 Charger Ckt PWA;PWA-CA25,IP52 KB FNKEY BD 411-1200-00066 Power Ckt4 FSR Ckt5 PCB;PWA-CA25,IP52 KB POWER BD 316-1200-00035 PWA;PWA-CA25,IP52 KB POWER BD 411-1200-00163 PCB;PWA-CA25,IP52 KB FSR BD 316-1200-00036 PCB;PWA-CA25,IP52 KB FSR BD 411-1200-00160 Power Ckt Charger Ckt FSR Ckt KEYBOARD CKT PWB;PWA-CA25,IP52 KEYBOARD SD:411120000064 PCB;PWA-CA25,IP52 KEYBOARD SD 316120000025 KEYBOARD CKT67 SD 411-1200-00066R01 PWA;PWA-CA25,IP52 KB FNKEY BD C 15Tuesday, May 06, 2003 Title SizeDocument NumberRev Date:Sheetof 5 5 4 4 3 3 2 2 1 1 DD CC BB AA L-BUTTON LED NET4 WIN PWR WIN WAK FSR PAD KETBOARD SLEEP NET2 PWR.WIN PWR.SLP.WAK K/BD CTL EM78P451AQ BAT LOW 8051 BATTERY 25%.50%.75%.100% NET3 R-BUTTON LED LP2951 SW CTL +5V IR LP2951BQ2000 +5V BAT SHOW CHG NET1 NET5 power in +12v SD 411120000066R0A PWA;PWA-CA25,IP52 KB FNKEY BD C 23Tuesday, May 06, 2003 Title SizeDocument NumberRev Date:Sheetof 5 5 4 4 3 3 2 2 1 1 DD CC BB AA SD 411-1200-00066R01 PWA;PWA-CA25,IP52 KB FNKEY BD C 33Tuesday, May 06, 2003 Title SizeDocument NumberRev Date:Sheetof SMB_C SMB_D SMB_D BATT_75% BATT_25% BATT_50% BATT_LOW BAT- BC LED BATT_MAIN 2.5V SS PU1 PU2 PU3 PU4 PU5 PU6 PU4 PU2 PU3 PU1 PU6 PU9 PU10 PU13 PU11 PU12 PU14 PU19 PU20 PU21 PU22 PU23 PU24 PU15 PU16 PU17 PU18 BATT_DEAD KB_IR PU5 Vin+VMAIN BAT+ SMB_C PU7 PU8 PU10 PU11 PU13 PU15 PU16 PU17 PU18 PU19 PU22 PU23 BKLIT_ON BATT_LOW KB_IR SS PU24 PU21 PU20 PU14 PU12 PU9 PU8 PU7 BATT_DEAD KB_IR Vin- Vin+ Vin- DISP_BAT NET17-W-PWR NET4-SLP SEN1-FSR SEN2-FSR SEN5-FSR NET16 NET5-WAKE NET3-PWR NET17-W-PWR NET16 NET1-R NET1-R SEN3-FSR SEN4-FSR NET2-L NET2-L BATT_25% BATT_50% BATT_75% DISP_BAT SWNET3 SWNET4 SWNET5 SW_BAT SW_BAT BKLIT_ON SWNET5SWNET4 SWNET3 NET4-SLPNET5-WAKE SEN3-FSR SEN1-FSR SEN4-FSR SEN5-FSR SEN2-FSR BATT_100% BATT_100% NET3-PWR +5V +5V +5V+5V+5V +5V +5V +5V +5V +5V +5V +5V +5V LED+5V LED+5V +5V +5V +5V+5V +5V R703 1M 0603 1% 1 2 D704 SFPJ-73 1 2 R217 1M 0603 1 2 C720 0.1U 50V 0603 1 2 C206 2.2U 16V 0805 1 2 S G D Q704 2SK2103 G D S C200 0.1U 50V 0603 1 2 C711 22U 25V 1812 1 2 R216 1M 0603 1 2 Q700 DTC144WK SOT23AN_1 1 2 3 C721 0.1U 50V 0603 1 2 R705 0.05 2512 1% 1 2 S G D Q202 2N7002 SOT23 G DS U700LTC1771 1 3 2 45 6 7 8 RUN/SS V_FB I_TH GNDP_GATE VIN SENSE MODE G D S Q705 SI4835DY 8 7 6 4 51 3 2 R208 1M 0603 1 2 U702 LP2951-02BM SO8 8 2 7 3 6 1 5 4 IN SENSE F/B SHUTDN 5VTAP OUT ERR- GND R710 1K 0603 1% 1 2 R207 1M 0603 1 2 J703 CON12 1 2 3 4 5 6 7 8 9 10 11 12 L70033uH 12 J701 CON12 1 2 3 4 5 6 7 8 9 10 11 12 0.1U 50V 0603 C716 1 2 R209 1M 0603 1 2 G D S Q702 SI4835DY 8 7 6 4 51 3 2 0.1U 50V 0603 C719 1 2 U701 LP2951-02BM SO8 8 2 7 3 6 1 5 4 IN SENSE F/B SHUTDN 5VTAP OUT ERR- GND R711 390 0603 1% 1 2 U200 W87E51 35 20 21 10 14 15 16 17 2 3 4 5 6 7 8 9 43 42 41 40 39 38 37 36 24 25 26 27 28 29 30 31 19 18 32 33 13 11 44 22 12 1 23 34 EA/VP X1 X2 RESET INT0/P3.2 INT1/P3.3 T0/P3.4 T1/P3.5 P1.0 P1.1 P1.2 P1.3 P1.4 P1.5 P1.6 P1.7 P0.0 P0.1 P0.2 P0.3 P0.4 P0.5 P0.6 P0.7 P2.0 P2.1 P2.2 P2.3 P2.4 P2.5 P2.6 P2.7 RD/P3.7 WR/P3.6 PSEN ALE/P TXD/P3.1 RXD/P3.0 VCC VSS INT2/P4.3 INT3/P4.2 P4.0 P4.1 C714 1000P 50V 0603 1 2 C704 10U 10V 1206 1 2 C202 1U 16V 0603 1 2 R709 1K 0603 1% 1 2 C707 22U 25V 1812 1 2 D201 LED 1 2 D701 LED1 12 C708 22U 25V 1812 1 2 R701 10K 0603 1 2 R211 0 0603 12 R715100K 06031% 12 C702 0.1U 50V 0603 1 2 S G D Q701 10P06 TO-252 G D S R205 3K 1 2 R704 100K 0603 1 2 R201 1K 1 2 R206 1 12 D703SFPJ-73 12 C700 330P 50V 0603 1 2 Q200 2SC2673 1 3 2 J706 DF13-6P-1.25H 6 5 4 3 2 1 R700 100K 0603 1 2 S205 SMT1-03A 3 42 1 D706 RLZ5.6B 1 2 D707 RLS4148 LL-34 12 J200 DF13-12P-1.25H 1 2 3 4 5 6 7 8 9 10 11 12 Q703 2SC4081R 1 2 3 R714 220K 0603 1% 1 2 + - U704A LM393 3 2 1 8 4 S G D Q204 2N7002 SOT23 G DS D200LED 1 2 J700 B06B-3100-141 12 34 56 78 910 1112 1314 R2001K 0603 1% 12 R702 3.3M 0603 1% 12 C709 0.1U 50V 0603 1 2 R716 100K 0603 1 2 R713 68K 0603 1% 1 2 D705SFPJ-73 12 R717 1K 0603 1 2 C715 0.1U 50V 0603 1 2 L703 120Z/100M0805 12 C722 0.1U 50V 0603 1 2 C710 0.1U 50V 0603 1 2 J705 DF13-12P-1.25H 1 2 3 4 5 6 7 8 9 10 11 12 R202 1K 0603 1% 1 2 R219 470K 0603 12 R215 1M 0603 1 2 C717 10U 10V 1206 1 2 F700 FUSE_3A1206 12 D702SFPJ-73 12 S G D Q203 2SK2103 G D S R214 470K 0603 12 S204 SMT1-03A 3 42 1 C713 10U 10V 1206 1 2 S G D Q205 2SK2103 G D S R7062.2K 0603 1% 12 R707 1K 0603 1% 1 2 R220 470K 0603 1 2 J702 DF13-6P-1.25V 6 5 4 3 2 1 R212 1M 0603 1 2 R213 1M 0603 1 2 R718 10K 0603 1% 1 2 S G D Q201 2SK2103G D S C205 1U 50V 0603 1 2 R712 100K 0603 1% 1 2 D700 HSMA5819 1 2 U703 BQ2000_SO 1 2 3 4 5 6 7 8 SNS VSS LED BAT TS RC VCC MOD L70122UH 12 S G D Q206 2N7002 SOT23 G DS C718 0.1U 50V 0603 1 2 R2034.7K0603 12 R719 10K 0603 1 2 R2044.7K060312 C723 0.1U 50V 0603 1 2 S203 SMT1-03A 3 42 1 Q706 SCK431 SOT23N 3 2 1 C712 22U 25V 1812 1 2 C703 0.1U 50V 0603 1 2 R720 100K 0603 1 2 L704 120Z/100M0805 12 C706 22U 25V 1812 1 2 F701FUSE_3A CC1206 12 R721 68K 0603 1 2 C725 0.1U 50V 0603 1 2 RP200 47KX81206 1 2 3 4 56 7 8 9 10 R708 0.05 2512 1% 1 2 C20320P50V 0603 12 J704 DF13-12P-1.25V 1 2 3 4 5 6 7 8 9 10 11 12 Y200 7.37MHZ 1 2 C701 0.01U 50V 0603 1 2 S200 SMT1-03A 3 42 1 L702 120Z/100M0805 12 S201 SMT1-03A 3 42 1 C724 0.1U 50V 0603 1 2 R218 1M 0603 1 2 C20420P50V 0603 12 C201 10U 16V 1206 1 2 R210 470K 0603 12 + C705 150UF 6.3V 1 2 S202 SMT1-03A 3 42 1 D202 RLS4148 LL-34 1 2 5 5 4 4 3 3 2 2 1 1 DD CC BB AA F3 ~` <-- S J )0 INS HOME |\ DEL CAPSLOCK $4 .> END "' Q SPACE ?/ =+ I {[ ^6 PAUSE R-SHIFT V F12 L-CTRL F4 --> Y E K N F %5 <, F8 SCROLL LOCK B O F5 &7 C }] F6 L-ALT F1 PgDn M D R ;: F10 H T *8 FN @2 G ENTER F9ESC !1 Z W BACK SPACE Num Lock PgUpTAB L-WIN#3 UF11 L-SHIFT F2 (9 R…

Text truncated - open the document above for the full version.

Test Report

Report No. 034H046F Page : 1 of 19 Version:1.0 Test Report Product Name: Rugged Wireless Keyboard Model No.: RKB FCC ID. : MAU1011 Applicant : MITAC THCHNOLOGY CORP. Address : No. 1, R&D Road 2, Hsinchu Science-Based Industrial Park, Taiwan, R.O.C. Date of Receipt : Apr. 14, 2003 Date of Test : May 6, 2003 Report No. : 034H046F The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 034H046F Page : 2 of 19 Version:1.0 Test Report Certification Test Date : May 6, 2003 Report No. : 034H046F Product Name : Rugged Wireless Keyboard Applicant : MITAC THCHNOLOGY CORP. Address : No. 1, R&D Road 2, Hsinchu Science-Based Industrial Park, Taiwan, R.O.C. Manufacturer : MITAC THCHNOLOGY CORP. Model No. : RKB FCC ID. : MAU1011 Rated Voltage : AC 120V/60Hz Trade Name : MITAC Measurement Standard : FCC Part 15 Subpart B: 2002, CISPR 22: 1997 Measurement Procedure : ANSI C63.4: 1992 Classification : Class B Test Result : Complied The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Ellie Cheng ) Tested By : ( James Wu ) Approved By : ( Kevin Wang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200347-0 Report No. 034H046F Page : 3 of 19 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ....................................................................................................4 1.1. EUT Description...........................................................................................................................4 1.2. Tested System Details...................................................................................................................5 1.3. Configuration of tested System ....................................................................................................6 1.4. EUT Exercise Software ................................................................................................................6 1.5. Test Facility ..................................................................................................................................7 2. Conducted Emission...................................................................................................................8 2.1. Test Equipment.............................................................................................................................8 2.2. Test Setup .....................................................................................................................................8 2.3. Limits ...........................................................................................................................................9 2.4. Test Procedure ..............................................................................................................................9 2.5. Test Result ....................................................................................................................................9 3. Radiated Emission ....................................................................................................................10 3.1. Test Equipment...........................................................................................................................10 3.2. Test Setup ...................................................................................................................................10 3.3. Limits .........................................................................................................................................11 3.4. Test Procedure ............................................................................................................................12 3.5. Test Result ..................................................................................................................................12 4. EMI Reduction Method During Compliance Testing ...........................................................13 5. Summary of Test Datas ............................................................................................................14 5.1. Test Data of conducted Emission ...............................................................................................15 5.2 Test Data of Radiated Emission...............................................................................................................17 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Report No. 034H046F Page : 4 of 19 Version:1.0 1. GENERAL INFORMATION 1.1. EUT Description Product Name : Rugged Wireless Keyboard Trade Name : MITAC Model No. : RKB Power Adapter : FAIRWAY, VE20-120 Cable Out: Non-Shielded, 1.8m Power cord: Non-Shielded, 1.8m Note: 1. This EUT is a Rugged Wireless Keyboard. 2. QuieTek has verified both construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: EMI Mode: Mode 1: Normal Operation Report No. 034H046F Page : 5 of 19 Version:1.0 1.2. Tested System Details The types for all equipment, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord (1) PC MITAC CA25 N/A Non-shielded, 1.8m, a ferrite core bonded (2) USB Mouse Logitech M-BE58 LZE11405011 -- (3) CD-ROM MITAC N/A N/A -- (4) USB Mouse Logitech M-BE58 LZE11403949 -- (5) Microphone & Earphone TOKTO SX-MI N/A -- (6) Modem ACEEX DM-1414 960011397 Non-shielded, 1.6m Signal Cable Type Signal cable Description A. Microphone & Earphone Cable Non-Shielded…

Text truncated - open the document above for the full version.

Test Setup Photos

Report No.: 034H046F Page : 1 of 2 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 034H046F Page : 2 of 2 Version:1.0 Front View of Radiated Test Back View of Radiated Test