MMABR200SBUSINESS BAND TWO-WAY RADIO

5900 Parretta Drive Kansas City, MO 64120 816.241.8500 We’d love to hear from you! Let us know what you think of your new Midland product at or by visiting us at midlandusa.com Note: Features & Specifications are subject to change without notice. MIDLAND is not responsible for unintentional errors or omissions on its packaging. MIDLAND promotes environmental sustainibility by providing battery recycling. Call 1.800.822.8837 for the nearest drop off site to you. 15.105 Information to the user. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. RF Exposure Statement Our radio generators RF electromagnetic energy during transmit mode. This radio is designed for and classified as ”Occupational Use Only” meaning it must be used only during the course of employment by individuals aware of the hazards and the ways to Minimize Such hazards. This radio is NOT intended for use by the ”General Population” in an uncontrolled environment. This radio has been tested and complies with the FCC RF exposure limits for ”Occupational Use Only”. In addition, our radio complies with the following Standards and Guidelines with regard to RF energy and electromagnetic energy levels and evaluation of such levels for exposure to humans: -IEEE Std. 1528:2013 and KDB447498, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. -American National Standards Institute (C95.1 1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields 3 kHz to 300 GHz. -American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields and Microwave. The information listed above provides the user with the information needed to make him or her aware of RF exposure and what to do to as-sure that this radio operates with the FCC RF exposure limits of this radio. Electromagnetic Interference/Compatibility During transmissions, the radio generates RF energy that can possibly cause interference with other devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft and blasting sites. Occupational/Controlled Use The radio transmitter is used in situations in which persons are exposed as consequence of their employment provided those persons are fully aware of the potential for exposure and can exercise control over their exposure. CANADA LICENSING INFORMATION Before using this radio, read this booklet which contains important operating instructions. For information on product details, brochures, user manuals and approved accessories Compliance with RF Exposure Standards National and international regulations require manufacturers to comply with the RF energy exposure limits for portable two-way radios before they can be marketed. Your two-way radio is designed, manufactured, and tested to comply with all applicable national and international regulations for human exposure to radio frequency electromagnetic energy. When two-way radios are used as a consequence of employment, applicable regulations may require users to be fully aware of and able to control their exposure to meet occupational requirements. RF Energy Exposure Awareness and Control Information and Operational Instructions for Occupational Use NOTE: This radio is intended for use in occupational/controlled conditions where users are aware of their exposure and can exercise control over their exposure to meet the requirements in national and international regulations. This radio device is not authorized for general population, consumer use. For more information on what RF energy exposure is, and how to control your exposure to ensure compliance with established RF exposure limits, consult the following websites: www.xxxyyy.com RF Exposure Compliance and Control Guidelines This radio transmitter has been approved by FCC/ISED to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance fo r each antenna type indicated. It is up to the user to properly operate this radio transmitter to insure safe operation. Please adhere to the following: •Use only the supplied or an approved antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage the radio, or result in violation of FCC/ISED regulations. •Do not use the radio with a damaged antenna. •If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for a replacement antenna. •Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use wi…

Text truncated - open the document above for the full version.

FCC ID Label Location 40mm*25mm FCC ID: MMABR200S

Report No.: AGC05067251001AP01 Page 1 of 2 TEST SETUP PHOTOS Radiated Emission Test Setup Below 1GHz Radiated Emission Test Setup Above 1GHz Report No.: AGC05067251001AP01 Page 2 of 2 RF Conducted Test Setup ****************************************End of Report*************************************

ReportNo.:AGC05067251001FR01 Page40of49 12.5kHz,Analogmodulation,AssignedFrequency:469.56250MHz ReportNo.:AGC05067251001FR01 Page41of49 12.TransmitterFrequencyBehavior 12.1ProvisionsApplicable 47CFRFCCPART§90.214 12.2MeasurementSetup ReportNo.:AGC05067251001FR01 Page42of49 12.3MeasurementProcedure AccordingtoTIA/EIA-6032.2.19requirement,asfortheproductdifferentfromPTT,weuseteststepsas follows: 1.ConnectDUTintoTestdiscriminatorandStorageOscilloscopeandkeepDUTstatsON; 2.Input1kHzsignalintoDUT; 3.Setthemodulationdomainanalyzertotriggerontherisingedgeofthewaveforminordertocapturea 4.single-shotturn-onofthetransmittersignals; 5.KeepDUTinOFFstateandKeythePTT; 6.Observethestoredoscilloscopeofmodulationdomainanalyzer.Thesignaltraceshallbemaintained withintheallowablelimitsduringtheperiodst1andt2,andshallalsoremainwithinlimitsfollowingt2; 7.Adjustthemodulationdomainanalyzertotriggeronthefallingedgeofthetransmitterwaveforminorder tocaptureasingle-shotturn-offtransmitterofthetransmittersignal. 8.KeepthedigitalportableradioinONstateandunkeythePTT; 9.Observethestoredoscilloscopeofmodulationdomainanalyzer,Thesignaltraceshallbemaintained withintheallowablelimitsduringtheperiodt3. 10.Setthesignalgeneratortotheassignedtransmitterfrequencyandmodulateitwitha1kHztoneat±12.5 kHzdeviationandsetitsoutputlevelto-100dBm. 11.Turnonthetransmitter. 12.SupplysufficientattenuationviatheRFattenuatortoprovideaninputleveltothestoredoscilloscope thatis40dBbelowthemaximumallowedinputpowerwhenthetransmitterisoperatingatitsratedpower 13.level.NotethispowerlevelonthestoredoscilloscopeasP0. 14.Turnoffthetransmitter. 15.AdjusttheRFlevelofthesignalgeneratortoprovideRFpowerequaltoP0.ThissignalgeneratorRFlevel shallbemaintainedthroughouttherestofthemeasurement. 16.Removetheattenuation,sotheinputpowertothestoredoscilloscopeisincreasedby30dBwhenthe transmitteristurnedon. 17.Adjusttheverticalamplitudecontrolofthestoredoscilloscopetodisplaythe1000Hzat±4divisions verticallycenteredonthedisplay.SettriggermodeoftheSpectrumAnalyzerto“Video”,andtunethe “triggerlevel”onsuitablelevel.Thensetthe“tigeroffset”to-10msforturnonand-15msforturnoff. 18.TurnonthetransmitterandthetransientwavewillbecapturedonthescreenofSpectrumAnalyzer. 19.Observethestoreddisplay.Theinstantwhenthe1kHztestsignaliscompletelysuppressedis consideredtobeton.Thetraceshouldbemaintainedwithinthealloweddivisionsduringtheperiodt1and t2. 20.Thenturnoffthetransmitter,andanothertransientwavewillbecapturedonthescreenofSpectrum Analyzer.Thetraceshouldbemaintainedwithinthealloweddivisionsduringtheperiodt3. ReportNo.:AGC05067251001FR01 Page43of49  Describelimitlineoftransmitterfrequencybehavior: ton:Theswitch-oninstanttonofatransmitterisdefinedbytheconditionwhentheoutputpower, measuredattheantennaterminal,exceeds0,1%ofthefulloutputpower(-30dBc). t1:periodoftimestartingattonandfinishingaccordingtoabove11.1  t2:periodoftimestartingattheendoft1andfinishingaccordingtoabove11.1  toff:switch-offinstantdefinedbytheconditionwhentheoutputpowerfallsbelow0,1%ofthefulloutput power(-30dBc).  t3:periodoftimethatfinishingattoffandstartingaccordingtoabove11.1 ReportNo.:AGC05067251001FR01 Page44of49 12.4MeasurementResult 12.5kHzChannelSeparation,Analogmodulation,AssignedFrequency:451.18750MHz-TurnOn 12.5kHzChannelSeparation,Analogmodulation,AssignedFrequency:451.18750MHz-TurnOff Note:Allthetestfrequencieswastested,butonlytheworstdataberecordedinthispart. ReportNo.:AGC05067251001FR01 Page45of49 13.AudioLowPassFilterResponse 13.1ProvisionsApplicable 2.1047(a):Voicemodulatedcommunicationequipment.Acurveorequivalentdatashowingthefrequency responseoftheaudiomodulatingcircuitoverarangeof100to5000Hzshallbesubmitted.Forequipment requiredtohaveanaudiolow-passfilter,acurveshowingthefrequencyresponseofthefilterorofallcircuitry installedbetweenthemodulationlimiterandthemodulatedstageshallbesubmitted. ANSITIA/EIA603-E:20163.2.15:Recommendedaudiofilterattenuationcharacteristicsaregivenbelow: Foraudiofrequenciesabove3000Hz,theaudioresponseofthepostlimiterlow-passfiltershallmeetor exceedthefollowingrequirements: a)Forequipmentoperatingon20,25or30kHzchannelbandwidthinthe25MHzto174MHzrange: Atfrequenciesfrom3000Hzthrough15,000Hztheattenuationshallbegreaterthantheattenuationat1000 Hzbyatleast:40log10(f/3000)dBwhere:fistheaudiofrequencyinHz. Atfrequenciesabove15,000Hz,theattenuationshallbegreaterthantheattenuationat1000Hz,byatleast: 28dB. b)Forequipmentoperatingwith25kHzbandwidthchannelsbetween406and512MHzthrough896MHz,and between929MHzthrough930MHz:Atfrequenciesfrom3000Hzthrough20,000Hz,theattenuationshallbe greater thantheattenuationat1000Hzbyatleast:60log10(f/3000)dBwhere:fistheaudiofrequencyinHz. Atfrequenciesabove20,000Hztheattenuationshallbegreaterthantheattenuationat1000Hzbyatleast:50 dB. c)Forequipmentoperatingonchannelsbetween896MHzthrough901MHz,between935MHzthrough940 MHz,and12.5or15kHzspacedchannelsinthefrequencyrange138-174MHzand406-512MHz. Atfrequenciesfrom3000Hzthrough20,000Hztheattenuationshallbegreaterthantheattenuationat1000 Hzbyatleast:100log10(f/3000)dBwhere:fistheaudiofrequencyinHz. ReportNo.:AGC05067251001FR01 Page46of49 13.2MeasurementProcedure Theratedaudioinputsignalwasappliedtotheinputoftheaudiolow-passfilter(orofallmodulationstages) usinganaudiooscillator,thisinputsignallevelanditscorrespondingoutputsignalwerethenmeasuredand recordedusingtheFFTDigitalSpectrumAnalyzer.Testswererepeatedatdifferentaudiosignalfrequencies from0to50kHz. TheDUTtransmitteroutputportwasconnectedtoModulationAnalyzer. 2)Pathlossforthemeasurementincluded. 3)Press23.1SPCLonmodulationanalyzertoenabletheexternalLOfromSigen. 4)SettheSigenfrequencytoFc+1.5MHz,RFoutputlevelto0dBmwithoutmodulation. 5)Transmittheradioandsettheaudioanalyzerto1kHzaudiofrequencyand60%oftheFullratedsystem deviation. 6)Uptheamplitudeby20dB. 7)OnDSA,getthereferencepointto0dB. 8)Varythefrequencyonaudioanalyzerfrom3kHzto20kHz,recordtheaudiotonefromDSA 13.3MeasurementSetup ReportNo.:AGC05067251001FR01 Page47of49 13.4MeasurementResult 12.5kHz,Analogmo…

Text truncated - open the document above for the full version.

Page 1 of 49 FCCTestReport FCCID:MMABR200S APPLICATIONPURPOSE:OriginalEquipment PRODUCTDESIGNATION:BUSINESSBANDTWO-WAYRADIO BRANDNAME:Midland MODELNAME:BR200S APPLICANT:MidlandRadioCorporation DATEOFISSUE:Dec.01,2025 STANDARD(S):FCCPart90SubpartI REPORTVERSION:V1.0 AttestationofGlobalCompliance(Shenzhen)Co.,Ltd ReportNo.:AGC05067251001FR01 ReportNo.:AGC05067251001FR01 Page2of49 ReportReviseRecord ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/Dec.01,2025ValidInitialRelease ReportNo.:AGC05067251001FR01 Page3of49 TableofContents 1.GeneralInformation..........................................................................................................................................5 2.ProductInformation..........................................................................................................................................6 2.1ProductTechnicalDescription....................................................................................................................6 2.2TestFrequencyList.....................................................................................................................................7 2.3RelatedSubmittal(S)/Grant(S).................................................................................................................8 2.4TestMethodology........................................................................................................................................8 2.5CalculationofEmissionIndicators.............................................................................................................8 2.6SpecialAccessories....................................................................................................................................8 2.7EquipmentModifications.............................................................................................................................8 3.TestEnvironment..............................................................................................................................................9 3.1AddressofTheTestLaboratory..................................................................................................................9 3.2TestFacility..................................................................................................................................................9 3.3EnvironmentalConditions.........................................................................................................................10 3.4MeasurementUncertainty........................................................................................................................10 3.5ListofEquipmentUsed.............................................................................................................................11 4.SystemTestConfiguration.............................................................................................................................12 4.1EUTConfiguration....................................................................................................................................12 4.2EUTExercise............................................................................................................................................12 4.3ConfigurationofTestedSystem................................................................................................................12 4.4EquipmentUsedinTestedSystem..........................................................................................................12 4.5SummaryofTestResults..........................................................................................................................13 5.DescriptionofTestModes.............................................................................................................................14 6.FrequencyStability.........................................................................................................................................15 6.1ProvisionsApplicable................................................................................................................................15 6.2MeasurementProcedure..........................................................................................................................15 6.3MeasurementSetup..................................................................................................................................15 6.4MeasurementResult.................................................................................................................................16 7.26dBEmissionBandwidthand99%OccupiedBandwidth.......................................................................17 7.1ProvisionsApplicable................................................................................................................................17 7.2MeasurementProcedure..........................................................................................................................17 7.3MeasurementSetup..................................................................................................................................17 7.4MeasurementResult.................................................................................................................................18 8.SpuriousRadiatedEmission..........................................................................................................................19 8.1ProvisionsApplicable................................................................................................................................19 8.2MeasurementProcedure..........................................................................................................................19 8.3MeasurementSetup..................................................................................................................................20 8.4MeasurementResul…

Text truncated - open the document above for the full version.

Page 1 of 18 CALIBRATION DATA PROBE CALIBRATION DATA Page 2 of 18 Page 3 of 18 Page 4 of 18 Page 5 of 18 Page 6 of 18 Page 7 of 18 Page 8 of 18 Page 9 of 18 Page 10 of 18 DAE CALIBRATION DATA Page 11 of 18 Page 12 of 18 Page 13 of 18 DIPOLE CALIBRATION DATA Page 14 of 18 Page 15 of 18 Page 16 of 18 Page 17 of 18 Page 18 of 18

Page 1 of 40 SAR Test Report Report No.: AGC05067251001FH01 FCC ID : MMABR200S PRODUCT DESIGNATION : BUSINESS BAND TWO-WAY RADIO BRAND NAME : Midland MODEL NAME : BR200S APPLICANT : Midland Radio Corporation DATE OF ISSUE : Dec. 12, 2025 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC05067251001FH01 Page 2 of 40 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Dec. 12, 2025 Valid Initial Release Report No.: AGC05067251001FH01 Page 3 of 40 Test Report Applicant Name Midland Radio Corporation Applicant Address 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Manufacturer Name Midland Radio Corporation Manufacturer Address 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Factory Name Guangdong Samzuk Technology Co.,Ltd Factory Address 2/F of Ming Huang Electrical Park 3rd Science Road, High-Tech Zone Heyuan City Guangdong China Product Designation BUSINESS BAND TWO-WAY RADIO Brand Name Midland Test Model BR200S Series Model N/A Declaration of Difference N/A EUT Voltage DC3.7 V Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2019 Date of receipt of test item Oct. 11, 2025 Test Date Dec. 02, 2025 Report Template AGCRT- US -PTT/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Bibo Zhang (Project Engineer) Dec. 12, 2025 Reviewed By Jack Gui (Reviewer) Dec. 12, 2025 Approved By Angela Li (Authorized Officer) Dec. 12, 2025 Report No.: AGC05067251001FH01 Page 4 of 40 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 7 3.1. THE DASY5 SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................... 7 3.2. DASY5 E-FIELD PROBE ................................................................................................................................. 8 3.3. DATA ACQUISITION ELECTRONICS DESCRIPTION ............................................................................................... 8 3.4. ROBOT .......................................................................................................................................................... 9 3.5. LIGHT BEAM UNIT .......................................................................................................................................... 9 3.6. DEVICE HOLDER .......................................................................................................................................... 10 3.7. MEASUREMENT SERVER ............................................................................................................................... 10 3.8. PHANTOM ................................................................................................................................................. 11 4. SAR MEASUREMENT PROCEDURE ............................................................................................................ 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 5. TISSUE SIMULATING LIQUID ....................................................................................................................... 15 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 15 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 15 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 16 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 17 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 17 6.2. SAR SYSTEM CHECK ................................................................................................................................... 18 7. EUT TEST POSITION ...................................................................................................................................... 19 7.1. BODY WORN POSITION ................................................................................................................................ 19 8. SAR EXPOSURE LIMITS ............................................................................................................................... 20 9. TEST FACILITY .............................................................................................................................................. 21 10. TEST EQUIPMENT LIST .............................................................................................................................. 22 11. MEASUREMENT UNCERTAINTY ................................................................................................................ 23 12. POWER MEASUREMENT ....................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC05067251001AP02 Page 1 of 6 INTERNAL PHOTOS Open View-1 of EUT Open View-2 of EUT Report No.: AGC05067251001AP02 Page 2 of 6 Internal View-1 of EUT Internal View-2 of EUT Report No.: AGC05067251001AP02 Page 3 of 6 Internal View-3 of EUT Internal View-4 of EUT Report No.: AGC05067251001AP02 Page 4 of 6 Internal View-5 of EUT Internal View-6 of EUT Report No.: AGC05067251001AP02 Page 5 of 6 Internal View-7 of EUT Internal View-8 of EUT Report No.: AGC05067251001AP02 Page 6 of 6 Internal View-9 of EUT Battery of EUT ****************************************End of Report*************************************

Midland Radio Corporation 5900 Parretta Drive Kansas City Missouri 64120-2134 United States 2.911 (d)(7)USA Agent v1.5 Section 2.911(d)(7) USA Agent for Service of Process Company name: Midland Radio Corporation Address: 5900 Parretta Drive Kansas City Missouri 64120-2134 United States FCC ID: MMABR200S 2.911(d)(7) USA Designated Agent for Service of Process We, [Midland Radio Corporation] (“the applicant”) designate [Midland Radio Corporation] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Midland Radio Corporation USA Address: 5900 Parretta Drive Kansas City Missouri 64120-2134 United States FRN Number: 0032804825 Contact Name: Jeremy Pensick Telephone No: 816 241-8500 Extension:255 Email: [email protected] Signature: Title: CEO Date: Dec. 15, 2025 Midland Radio Corporation 5900 Parretta Drive Kansas City Missouri 64120-2134 United States 2.911 (d)(7)USA Agent v1.5 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the

Report No.: AGC05067251001AP02 Page 1 of 5 EXTERNAL PHOTOS All View of EUT Top View of EUT UHF Antenna Report No.: AGC05067251001AP02 Page 2 of 5 Bottom View of EUT Front View of EUT Report No.: AGC05067251001AP02 Page 3 of 5 Back View of EUT Left View of EUT Report No.: AGC05067251001AP02 Page 4 of 5 Right View of EUT Port-1 View of EUT Report No.: AGC05067251001AP02 Page 5 of 5 DESKTOP CHARGER MULTI UNIT CHARGER ****************************************End of Report*************************************

Midland Radio Corporation 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Date: Dec. 15, 2025 FCC Part 90 Letter FEDERAL COMMUNICATIONS COMMISSION Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of compliance to the requirements of §90.203 FCC ID: MMABR200S Dear Sir/Madam, We, Midland Radio Corporation, acknowledge that this device will not be marketed to USA users with the frequency band which is not allowed by rule part 90.203 and it is a violation of FCC rules if this device is operated on unauthorized frequencies inside the U.S.A. This equipment meets the requirements of the FCC Rules, Parts 90.203(e) and (g), as applicable. Programming of this products transmit frequencies can be performed ONLY by the manufacturer or by service or by maintenance personal. The operator can’t program transmit frequencies using the equipment’s external operation controls. This is to certify that the requirements of 47 CFR Part 90.203(j)(4) and (5) spectrum efficiency are met by the Midland Radio Corporation demonstrated by the tests conducted on the sample radio provided. Additionally, the radio also meets the requirement of one voice channel per 12.5 kHz of channel bandwidth for analogue speech (11k0F3E emission). Sincerely Yours, Signature: (Applicant signature) Jeremy Pensick

Midland Radio Corporation 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Dec. 15, 2025 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: MMABR200S I, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to this application for equipment certifi…

Text truncated - open the document above for the full version.