MMAGXT1050RTwo way radio

THIS PAGE IS INTENTIONALLY LEFT BLANK Model GXT1000/1030/1040/1050/1191 Series Page 2 midlandusa.com Welcome to the world of Midland electronics Congratulations on your purchase of a high quality MIDLAND product. Your 2-way radio represents state-of-the-art high-tech engineering. Designed for GMRS (General Mobile Radio Service) operation, this compact package is big on performance. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two- way radio is designed for reliable and trouble-free performance for years to come. Features - 22 GMRS Channels - 28 Midland Preset Channels - 142 Privacy Codes (38 CTCSS / 104 DCS) - Waterproof JIS4 Standard - Group Call - Direct Call - VOX - Selectable Call Alert (5 additional Animal Sounds on GXT1050) - NOAA Weather Radio - NOAA Weather Alert - NOAA Weather Scan - Dual Watch - Vibrate Alert - Monitor Function - Roger Beep Tone - Silent Operation - Keypad Lock - Whisper Function - SOS Siren - Power HI/MED/LO Settings - Speaker / Microphone Jacks - Battery Meter / Battery Low Indicator This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Model GXT1000/1030/1040/1050/1191 Series Page 3 midlandusa.com IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION (Only Applicable for GMRS Radio Use in the United States) The radios operate on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating the radio. Serious penalties could result from unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of your transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www.fcc.govand request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: - United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J - American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992 - Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition - National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 - International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. Body-Worn Operation If you wear the radio on your body when transmitting always use a Midland-supplied or approved belt clip, holster, case, or body harness for this product. Use of any accessories not supplied or approved by Midland may cause RF exposure in excess of the FCC RF exposure guidelines. RF Exposure Information This product was tested for use next to the face with a minimum separation distance of 25mm (1 inch) and next to the body (belt clip with headset) with the minimum sep- aration distance of 0mm (0 inches). The highest SAR value recorded during testing complies with FCC RF Exposure requirements. SAR test reports are available on the FCC website https://apps.fcc.gov/oetcf/eas/reports/GenericSearch.cfm by searching for the applicable FCC ID. This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter. 14. POWER/VOLUME KNOB– Turn clockwise to turn the power on and increase the volume level. Turn counter-clockwise to decrease the volume level and turn the power off. 15. PTT Button– Press and hold to transmit voice communication. 16. CALL/LOCK Button– Press to send a CALL ALERT signal. Press and hold to turn KEY LOCK on/off. 17. UP s and DOWN t / SOS SIREN Buttons– Make adjustments in MENU mode. Press and hold the DOWN button for 5 seconds to activate the SOS Siren function. 18. SPEAKER– Built-in speaker. 19. ANTENNA 20. EXTERNAL SPEAKER/MIC JACK 21. MENU/WX SCAN Button– Press to access Menu mode. Press and hold for 5 seconds to activate the NOAA Weather Scan function. 22. MONITOR/SCAN Button– Press to enter SCAN mode. Press and hold to enter MONITOR mode. 23. MIC– Built-in microphone. LCD DISPLAY CONTROLS 1 Model GXT1000/1030/1040/1050/1191 Series Page 4 midlandusa.com 6 5 4 3 2 1. BATTERY METER– Indicates the battery level. 2. WHISPER ICON – Indicates when the Whisper feature is on. 3. KEY LOCK ICON – Indicates KEY LOCK mode is on. 4. VOX ICON– Indicates when VOX mode is active. 5. NOAA WEATHER (WX) BAND ICON – Indicates when the radio is in Weather Band mode. 6. CHANNEL NUMBER– Changes from 1~50 on GMRS band (1~10 on WX band). 7. GROUP MODE ICON– Indicates when the Group Mode is on. 8. VIBRATE ALERT ICON– Indicates when the Vibrate-Alert feature is on. 9. SOS SIREN ICON– Indicates the SOS Siren is on. 10. T…

Text truncated - open the document above for the full version.

Midland Radio Corporation Sep.13, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : MMAGXT1050R Model Number: GXT1050R, GXT1000R To Whom It May Concern: We, The Midland Radio Corporation hereby declare that the models are identical except except the colour and GXT1050R has additional animal call tone feature. Except for the different above, no other modification is performed. Sincerely, Signature: Midland Radio Corporation Contact person: Butch Rittmann

Midland Radio Corporation Agent Authorization Company: Midland Radio Corporation Address: 5900 Parretta Drive Kansas City, MO 64120-2134 USA Product Name: Two way radio Model Number(s): GXT1050R, GXT1000R Product Description: Two way radio We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-09-09 Name: Butch Rittmann Company: Midland Radio Corporation

Midland Radio Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-08-31 Subject; Request for Confidentiality FCC ID: MMAGXT1050R To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Midland Radio Corporation Contact person: Butch Rittmann – Chief Operating Officer

Report No.: AGC05067220701AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC05067220701AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC05067220701AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC05067220701AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 30mm&40mm FCC ID: MMAGXT1050R

Report No.: AGC05067220701AP02 Page 1 of 4 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC05067220701AP02 Page 2 of 4 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Antenna Report No.: AGC05067220701AP02 Page 3 of 4 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC05067220701AP02 Page 4 of 4 INTERNAL VIEW OF EUT (FIGURE 4) ****************************************End of Report****************************************

Page 1 of 44 SAR Test Report Report No.: AGC05067220701FH01 FCC ID : MMAGXT1050R PRODUCT DESIGNATION : Two way radio BRAND NAME : MIDLAND MODEL NAME : GXT1050R, GXT1000R APPLICANT : Midland Radio Corporation DATE OF ISSUE : Aug. 17, 2022 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC05067220701FH01 Page 2 of 44 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Aug. 17, 2022 Valid Initial Release Report No.: AGC05067220701FH01 Page 3 of 44 Test Report Applicant Name Midland Radio Corporation Applicant Address 5900 Parretta Drive Kansas City, MO 64120-2134 USA Manufacturer Name Midland Radio Corporation Manufacturer Address 5900 Parretta Drive Kansas City, MO 64120 USA Factory Name Midland Radio Corporation Factory Address 5900 Parretta Drive Kansas City, MO 64120 USA Product Designation Two way radio Brand Name MIDLAND Model Name GXT1050R, GXT1000R Different Description All the same except the colour and GXT1050R has additional animal call tone feature. EUT Voltage DC6.0V Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 Test Date Aug. 01, 2022 Report Template AGCRT- US -PTT/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Thea Huang (Project Engineer) Aug. 01, 2022 Reviewed By Calvin Liu (Reviewer) Aug. 17, 2022 Approved By Max Zhang (Authorized Officer) Aug. 17, 2022 Report No.: AGC05067220701FH01 Page 4 of 44 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ....................................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................................. 6 2.1. EUT DESCRIPTION ............................................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ...................................................................................................................................... 7 3.1. THE DASY5 SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS ................................. 7 3.2. DASY5 E-FIELD PROBE ...................................................................................................................................................... 8 3.3. DATA ACQUISITION ELECTRONICS DESCRIPTION .................................................................................................................. 8 3.4. ROBOT ................................................................................................................................................................................. 9 3.5. LIGHT BEAM UNIT ................................................................................................................................................................ 9 3.6. DEVICE HOLDER................................................................................................................................................................. 10 3.7. MEASUREMENT SERVER .................................................................................................................................................... 10 3.8. PHANTOM ....................................................................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE .......................................................................................................................... 12 4.1. SPECIFIC ABSORPTION RATE (SAR) ................................................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE .................................................................................................................................... 13 5. TISSUE SIMULATING LIQUID ...................................................................................................................................... 15 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID ....................................................................................................... 15 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................................... 15 5.3. TISSUE CALIBRATION RESULT............................................................................................................................................ 16 6. SAR SYSTEM CHECK PROCEDURE ......................................................................................................................... 17 6.1. SAR SYSTEM CHECK PROCEDURES ................................................................................................................................. 17 7. EUT TEST POSITION ..................................................................................................................................................... 19 7.1. BODY WORN POSITION ...................................................................................................................................................... 19 8. SAR EXPOSURE LIMITS .............................................................................................................................................. 20 9. TEST FACILITY .............................................................................................................................................................. 21 10. TEST EQUIPMENT LIST ..............................................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 18 CALIBRATION DATA PROBE CALIBRATION DATA Page 2 of 18 Page 3 of 18 Page 4 of 18 Page 5 of 18 Page 6 of 18 Page 7 of 18 Page 8 of 18 Page 9 of 18 Page 10 of 18 DAE CALIBRATION DATA Page 11 of 18 Page 12 of 18 Page 13 of 18 DIPOLE CALIBRATION DATA Page 14 of 18 Page 15 of 18 Page 16 of 18 Page 17 of 18 Page 18 of 18

Page 1 of 39 FCC Test Report Report No.: AGC05067220701FE10 FCC ID : MMAGXT1050R APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Two way radio BRAND NAME : MIDLAND MODEL NAME : GXT1050R, GXT1000R APPLICANT : Midland Radio Corporation DATE OF ISSUE : Jul. 27, 2022 STANDARD(S) : FCC Part 95 Rules REPORT VERSION : V 1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC05067220701FE10 Page 2 of 39 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 27, 2022 Valid Initial Release Report No.: AGC05067220701FE10 Page 3 of 39 TABLE OF CONTENTS 1. GENERAL INFORMATION .............................................................................................................................. 5 2. PRODUCT INFORMATION .............................................................................................................................. 6 2.1 PRODUCT TECHNICAL DESCRIPTION ................................................................................................ 6 2.2 TEST FREQUENCY LIST ........................................................................................................................ 7 2.3 RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................. 8 2.4 TEST METHODOLOGY .......................................................................................................................... 8 2.5 CALCULATION OF EMISSION INDICATORS ........................................................................................ 8 2.6 SPECIAL ACCESSORIES ....................................................................................................................... 8 2.7 EQUIPMENT MODIFICATIONS .............................................................................................................. 8 2.8 ANTENNA REQUIREMENT .................................................................................................................... 9 3. TEST ENVIRONMENT ................................................................................................................................... 10 3.1 ADDRESS OF THE TEST LABORATORY ............................................................................................ 10 3.2 TEST FACILITY ..................................................................................................................................... 10 3.3 ENVIRONMENTAL CONDITIONS......................................................................................................... 11 3.4 MEASUREMENT UNCERTAINTY ........................................................................................................ 11 3.5 LIST OF EQUIPMENTS USED ............................................................................................................. 12 4. SYSTEM TEST CONFIGURATION ................................................................................................................ 13 4.1 EUT CONFIGURATION ......................................................................................................................... 13 4.2 EUT EXERCISE ..................................................................................................................................... 13 4.3 CONFIGURATION OF TESTED SYSTEM ............................................................................................ 13 4.4 EQUIPMENT USED IN TESTED SYSTEM........................................................................................... 13 4.5 SUMMARY OF TEST RESULTS ........................................................................................................... 14 5. DESCRIPTION OF TEST MODES ................................................................................................................. 15 6. FREQUENCY STABILITY .............................................................................................................................. 16 6.1 PROVISIONS APPLICABLE .................................................................................................................. 16 6.2 MEASUREMENT PROCEDURE ........................................................................................................... 16 6.3 MEASUREMENT SETUP ...................................................................................................................... 16 6.4 MEASUREMENT RESULTS.................................................................................................................. 17 7. EMISSION BANDWIDTH ............................................................................................................................... 18 7.1 PROVISIONS APPLICABLE .................................................................................................................. 18 7.2 MEASUREMENT PROCEDURE ........................................................................................................... 18 7.3 MEASUREMENT SETUP ...................................................................................................................... 18 7.4 MEASUREMENT RESULTS.................................................................................................................. 19 8. SPURIOUS RATIATED EMISSION ................................................................................................................. 20 8.1 PROVISIONS APPLICABLE .................................................................................................................. 20 Report No.: AGC05067220701FE10 Page 4 of 39 8.2 MEASUREMENT PROCEDURE ........................................................................................................... 20 8.3 MEASUREMENT SETUP ...................................................................................................................... 21 8.4 MEASUREMENT RESULTS.................................…

Text truncated - open the document above for the full version.

Report No.: AGC05067220701AP01 Page 1 of 1 TEST SETUP PHOTOS RADIATED EMISSION TEST SETUP BELOW 1GHz RADIATED EMISSION TEST SETUP ABOVE 1GHz ****************************************End of Report*************************************