MMAMXMC95Wireless Bluetooth Microphone

5900 Par retta Drive, Kansas City, MO 64120 Features and specifications subject to change without notice. Visit midlandusa.com for more information on genuine Midland accessories for all Midland MicroMobile ® produc ts. ©2 026 Midland Radio Corporation. All Rights Reserved. QUICKSTART GUIDE MXMC95 Follow us: PAIRING BL UETOOTH ® MIC The pair ing button on the base unit blinks red when it has power, but the mic is not on or connected. Once the BT mic connects, the pairing button on the base will blink green. If the wired mic is connected and turned on, the pairing button on the base turns off. When the BT mic is turned on, it will display the POWER ON screen with a blinking BT indicator and red blinking RX/TX indicator. After it connects with the base, there is a “Base Unit Connected” voice prompt, the BT indicator on the display lights steady, and the red blinking RX/TX indicator turns off. Additionally, all channel information is displayed. Th is device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference including received interference that may cause undesired operation. The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment. Replacement of any transmitter component (crystal, semiconductor, etc.) not authorized by the FCC equipment authorization for this radio could violate FCC rules. Wireless Bluetooth Microphone (Cont’d) RADIO OPERATION 1. Rot ate the Power/Volume Knob clockwise to turn the radio on. A “Base Unit Connected” voice prompt will be heard when the Bluetooth ® microphone connects to the radio base. 2. Rotate the Power/Volume Knob further clockwise to increase the radio volume or counterclockwise to decrease the radio volume. The monitor function may be engaged to generate audible noise to aid in setting the volume. Press and hold the WX/MON button to toggle the monitor function on and off. (Figure A) 3. Use the UP and DOWN buttons on the radio microphone to select the radio channel. (Figure B) 4. Press and hold the PTT button and speak into the microphone to initiate communication. Release the PTT button to hear the reply. 5. Press and release the WX/MON button to enter or exit weather mode. 6. Rotate the Power/Volume Knob fully counterclock wise to turn the radio off. Note: If using the wired microphone, insert the microphone’s plug into the radio’s microphone jack. Line up the connector key with the slot, push in, and twist the locking ring clockwise. Pairing Button Mic Jack USB-C Port Quick St art Guide Power/Volume Knob PTT Up/Down Button Display A B WX/MON PAIRING BL UETOOTH ® MIC The radio and inc luded Bluetooth microphone are paired from the factory. If a different microphone needs to be paired to the radio, use the following procedure. 1. Turn the microphone on. Since the microphone is not yet paired with the radio, it will pause at the POWER ON screen. 2. From the Power On screen, press and hold both the UP and DOWN buttons on the microphone until the RX/TX LED begins to blink red, green, and blue. 3. Press and hold the pairing button on the base unit for five seconds. 4. After the pairing button is released, the pairing button will blink red and green until the pairing process completes. RX/TX LED Charge Jack This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Radiation Exposure Statement To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 0cm from your body.

Midland Radio Corporation Covered Equipment Certification Attestation Letter 5/27/2026 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA ATTN.: Reviewing Engineer FCC ID: MMAMXMC95 Midland Radio Corporation (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Note: If the equipment for which the applicant seeks authorization is produced by any of the entities identified on the current Covered List, the applicant should include an explanation on why the equipment is not “covered” equipment. Midland Radio Corporation (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Midland Radio Corporation (“the applicant”) certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Signed: Printed name: Jeremy Pensick Title: CEO Company Name: Midland Radio Corporation Date: 5/27/2026

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Midland Radio Corporation Address: 5900 Parretta Drive Kansas City, MO 64120-2134 U.S.A Product Name: Wireless Bluetooth Microphone FCC ID: MMAMXMC95 Model(s): MXMC95 2.911(d)(7) USA Designated Agent for Service of Process We, Midland Radio Corporation (“the applicant”) designate Midland Radio Corporation NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent & Applicant Company name: Midland Radio Corporation Address: 5900 Parretta Drive Kansas City, MO 64120-2134 U.S.A. FRN：0032804825 Contact Name: Jeremy Pensick Telephone No: 816 241-8500 Email: [email protected] Signature: Title: CEO Date: 2026-05-27 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al- security-threats-to-the-communications-supply-chain-through-the

Midland Radio Corporation DATE: May 27, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Tongzhou Testing Co.,Ltd. (1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commission’s regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with Midland Radio Corporation (5900 Parretta Drive Kansas City Missouri 64120-2134 United States) <Signature> Name: Jeremy Pensick Title: CEO Applicant Company: Midland Radio Corporation

Date: May 27, 2026 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Compliance Testing, LLC to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). Sincerely, <Signature> Name: Jeremy Pensick Title: CEO Company: Midland Radio Corporation

DATE: May 27, 2026 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: MMAMXMC95 Product Name: Wireless Bluetooth Microphone Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential: (List here the documents for which you are seeking confidentiality – for example ...) • Schematics • Block diagram • Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. <Signature> Name: Jeremy Pensick Title: CEO Company: Midland Radio Corporation

Report No.: TZ0408260402PH02 Page 1 of 4 External Photographs of EUT External Photo 1 External Photo 2 Report No.: TZ0408260402PH02 Page 2 of 4 External Photo 3 External Photo 4 Report No.: TZ0408260402PH02 Page 3 of 4 External Photo 5 External Photo 6 Report No.: TZ0408260402PH02 Page 4 of 4 External Photo 7 External Photo 8

The size of the label is 15mm*10mm with White forecolor. The size of the logo is 5mm*5mm. FCC ID: MMAMXMC95

Report No.: TZ0408260402PH03 Page 1 of 6 Internal Photographs of EUT Internal Photo 1 Internal Photo 2 BT Antenna Report No.: TZ0408260402PH03 Page 2 of 6 Internal Photo 3 Internal Photo 4 Report No.: TZ0408260402PH03 Page 3 of 6 Internal Photo 5 Internal Photo 6 Report No.: TZ0408260402PH03 Page 4 of 6 Internal Photo 7 Internal Photo 8 Report No.: TZ0408260402PH03 Page 5 of 6 Internal Photo 9 Internal Photo 10 Report No.: TZ0408260402PH03 Page 6 of 6 Internal Photo 11

Report No.: TZ0408260402FEM01 Page 1 of 21 This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Tongzhou Testing Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Tongzhou Testing Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. The test report apply only to the specific sample(s) tested under stated test conditions. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. TEST REPORT Report Number : TZ0408260402FEM01 Product Name : Wireless Bluetooth Microphone Model/Type reference : MXMC95 FCC ID : MMAMXMC95 Prepared for : Midland Radio Corporation 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Prepared By : Shenzhen Tongzhou Testing Co.,Ltd. 1st Floor, Building 1, Haomai High-tech Park, Huating Road 387, Dalang Street, Longhua, Shenzhen, China Standards : FCC CFR Title 47 Part 15 Subpart B, ANSI C63.4: 2014 Date of Test : 2026-04-23 ~ 2026-04-30 Date of Issue : 2026-04-30 Prepared by : Nancy Li Reviewed by : Allen Lai Approved by : Max Zhang (Authorized Officer) Report No.: TZ0408260402FEM01 Page 2 of 21 ** Report Revise Record ** Report Version Revise Time Issued Date Valid Version Notes V1.0 / 2026-04-30 Valid Initial release Report No.: TZ0408260402FEM01 Page 3 of 21 TABLE OF CONTENTS 1. G E N E R A L I N F O R M A T I O N ....................................................... 4 1.1. Client Information ................................................................................................................... 4 1.2. Description of Device (EUT) ................................................................................................... 4 1.3. EUT configuration ................................................................................................................... 5 1.4. Description of Test Facility .................................................................................................... 5 1.5. Statement of the Measurement Uncertainty ......................................................................... 6 1.6. Measurement Uncertainty ...................................................................................................... 6 1.7. Description of Test Modes ..................................................................................................... 6 2. T E S T M E T H O D O L O G Y ............................................................ 7 2.1. EUT Configuration .................................................................................................................. 7 2.2. EUT Exercise ........................................................................................................................... 7 2.3. Test Sample ............................................................................................................................. 7 3. S Y S T E M T E S T C O N F I G U R A T I O N .............................................. 8 3.1. Justification ............................................................................................................................. 8 3.2. Special Accessories ............................................................................................................... 8 3.3. Block Diagram/Schematics .................................................................................................... 8 3.4. Equipment Modifications ....................................................................................................... 8 3.5. Test Setup ................................................................................................................................ 8 4. S U M M A R Y O F T E S T R E S U L T S ................................................. 9 5. T E S T R E S U L T .................................................................... 10 5.1. Radiated Emissions Measurement ...................................................................................... 10 5.2. AC Power line conducted emissions .................................................................................. 17 6. L I S T O F M E A S U R I N G E Q U I P M E N T ......................................... 20 7. T E S T S E T U P P H O T O G R A P H S O F E U T ..................................... 21 8. E X T E R I O R P H O T O G R A P H S O F E U T ........................................ 21 9. I N T E R I O R P H O T O G R A P H S O F E U T ........................................ 21 Report No.: TZ0408260402FEM01 Page 4 of 21 1. G E N E R A L I N F O R M A T I O N 1.1. Client Information Applicant : Midland Radio Corporation Address : 5900 Parretta Drive Kansas City Missouri 64120-2134 United States Manufacturer : Midland Radio Corporation Address : 5900 Parretta Drive Kansas City Missouri 64120-2134 United States 1.2. Description of Device (EUT) Product Name : Wireless Bluetooth Microphone Trade Mark : MIDLAND Model Number : MXMC95 Test Model : MXMC95 Power Supply : Powered by a DC 3.7V battery or DC 5V via USB Type-C Hardware version : V0.4 Software version : V1.0 Note 1: Antenna position refer to EUT Photos. Note 2: the above information was supplied by the applicant. Report No.: TZ0408260402FEM01 Page 5 of 21 1.3. EUT configuration The following peripheral devices and interface cables were connected during the measurement: ●supplied by the manufacturer ○supplied by the lab ○ Adapter Model: MDY-10-EH Input: 100-240V~ 50/60Hz 0.7A Output: DC 5V, 3A 1.4. Description of Test Facility FCC Designation Number: CN1275 Test Firm Registration Number: 167722 Shenzhen Tongzhou Testing Co.,Ltd has been listed on the US Federal Communications Commission list of test facilities recognized to perform electromagnetic emissions measurements. A2LA Certificate Number: 5463.01 Shenzh…

Text truncated - open the document above for the full version.

Report No.: TZ0408260402PH04 Page 1 of 2 Test Setup Photos of the EUT Conducted Emission Radiated Emission Below 1GHz Report No.: TZ0408260402PH04 Page 2 of 2 Radiated Emission Above 1GHz