MMAT35AGMRS / FRS

THIS PAGE IS INTENTIONALLY LEFT BLANK Model T10 & T30 Series Page 2 midlandusa.com Welcome to the world of Midland electronics Congratulations on the purchase of your high quality MIDLAND product. Your two-way radio represents state-of-the-art high-tech engineering and is designed for GMRS (General Mobile Radio Service) operation. It is a quality piece of electronic equipment, skillfully constructed with the finest components. The circuitry is all solid-state and mounted on a rugged printed circuit board. Your two- way radio is designed for reliable and trouble-free performance for years to come. Features - 22 GMRS/FRS Channels - 38 Privacy Codes (CTCSS) - VOX - Call Alert - NOAA Weather Radio - NOAA Weather Alert - Scan Function - Monitor Function - Roger Beep Tone - Silent Operation - Key Pad Lock - Speaker / Microphone Jacks (T31 only) - Battery Meter / Battery Low Indicator - USB Jack Charging (T31 only) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device does not cause harmful interference, and (2) this radio must accept any interference that may cause undesired operation. To maintain compliance with FCC’s RF exposure guidelines, for body-worn operation, this radio has been tested and meets the FCC RF exposure guidelines when used with Midland Radio Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. Model T10 & T30 Series Page 3 midlandusa.com IMPORTANT NOTICE, FCC LICENSE REQUIRED FOR GMRS OPERATION (Only Applicable for GMRS Radio Use in the United States) The radios operate on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. You must be licensed prior to operating on channels 1 - 7 or 15 - 22, which comprise the GMRS channels of the radios. Serious penalties could result from unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Acts Sections 501 and 502 (amended). You will be issued a call sign by the FCC which should be used for station identification when operating the radio on GMRS channels. You should also cooperate by engaging in permissible transmissions only, avoiding channel interference with other GMRS users, and being prudent with the length of your transmission time. To obtain a license or ask questions about the license application, contact the FCC at 1-888-CALL FCC or go to the FCC's website: http://www .fcc.govand request form 605. Exposure To Radio Frequency Energy Your Midland radio is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy: - United States Federal Communications Commission, Code of Federal Regulations: 47 CFR part 2 sub-part J - American National Standards Institute (ANSI)/Institute of Electrical & Electronic Engineers (IEEE) C95. 1-1992 - Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1999 Edition - National Council on Radiation Protection and Measurements (NCRP) of the United States, Report 86, 1986 - International Commission on Non-lonizing Radiation Protection (ICNIRP) 1998 To control your exposure and ensure compliance with the general population or uncontrolled environment exposure limits, transmit no more than 50% of the time. The radio generates measurable RF energy exposure only when transmitting. IMPORTANT:Changes or modifications to this unit not expressly approved by MIDLAND RADIO CORP. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the COMMUNICATOR to exceed those limitations. Any adjustment to your radio must be made by qualified technicians. Model T10 & T30 Series Page 4 midlandusa.com LCD DISPLAY 1.NOAA WEATHER (WX) BAND ICON – Indicates when the radio is in Weather Band mode. 2. KEY LOCK ICON – Indicates KEY LOCK mode is on. 3. VOX ICON– Indicates when VOX mode is active. 4. CHANNEL NUMBER– Changes from 1~22 on GMRS/FRS band (1~10 on WX band). 5. PRIVACY CODE– Indicates Privacy Code selected by user (oF~38). 6. BATTERY METER– Indicates the battery level. 7. RECEIVE (RX) ICON– Indicates radio is receiving a transmission . 8. TRANSMIT (TX) ICON– Indicates radio is transmitting a signal. 9. PRIVACY CODE ICON– Indicates Privacy Code is on. 1 CONTROLS 10. PTT Button– Press and hold to transmit voice communication. 11. CALL/LOCK Button– Press to send a CALL ALERT signal. Press and hold to turn KEY LOCK on/off. 12. MIC– Built-in microphone. 13. USB CHARGING JACK (T31 only) 14. SPEAKER– Built-in speaker. 15. ANTENNA 16. EXTERNAL SPEAKER/MIC JACK (T31 only) 17. MENU Button– Press momentarily to access Menu mode. 18. MONITOR/SCAN Button– Press to enter SCAN mode. Press and hold to enter MONITOR mode. 19. UP/WX s and DOWN t Buttons– Make adjustments in MENU mode. Press and hold the UP button for 3 seconds to activate the NOAA Weather Radio function. 16 15 14 12 11 10 7 6 3 2 13 17 4 5 8 9 18 19 Model T10 & T30 Series Page 5 midlandusa.com BATTER Y INSTALLATION Your radio operates with either 3 AAA NiMH batteries or optional 3 AAA alkaline batteries. The belt clip should be removed (see below) to ease installation or removal of the batteries. To install the batteries: 1. With the back of the radio facing you, remove the belt clip (see diagram below) for easy access, then remove the Battery Cover by pressing down on the top center and sliding it down from the radio. 2. Insert 3 AAA NiMH batteries or 3 AAA batteries observing the polarity as shown. Installing the batteries incorrectly will prevent the unit from operating or may damage the unit. 3. Return the Battery Cover by sliding it up on the radio. Replace the belt clip, making sure it locks into place. BATTERY COMPARTMENT BATTERY COMPARTMENT COVER Press here and push…

Text truncated - open the document above for the full version.

Midland Radio Corporation 5900 Parretta Drive, Kansas City, Missouri United States 64120 August 19, 2015 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 SUBJECT : Midland Radio Corporation FCC ID : MMAT35A Label Justification Letter Dear Sir/Madame, Because the device is so small that it is not practicable to place the statement specified under 15.19 statement request, the information required by this paragraph shall be placed in a prominent location in the User’s Manual. - The available label area on the device is limited because it is relatively small and has many contoured surfaces, keypads, LDC display, and other connectors. - The batteries are designed for easy removal and the label will be visible whenever the batteries are removed for replacement. - The label will be readily visible at the time of purchase because the device will be marketed without the battery installed. - FCC ID will be printed on the gift box which will be readily visible to the purchaser at the time of purchase. Sincerely, Jeff Brame Midland Radio Corporation 5900 Parretta Drive, Kansas City, Missouri United States 64120 Label and Location

Midland Radio Corporation 5900 Parretta Drive, Kansas City, Missouri United States 64120 Date: August 19, 2015 Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: MMAT35A Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Exhibit Type File Name Schematics Diagram(s) CONF APPENDIX_ T35A_Schemetics.PDF Block diagram CONF APPENDIX_ T35A_Block diagram.PDF Operation description CONF APPENDIX_ T35A_Operation description.PDF The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Jeff Brame

www.kes.co.kr FCC ID : MMAT35A Page 1 of 5 EUT External photographs www.kes.co.kr FCC ID : MMAT35A Page 2 of 5 www.kes.co.kr FCC ID : MMAT35A Page 3 of 5 www.kes.co.kr FCC ID : MMAT35A Page 4 of 5 www.kes.co.kr FCC ID : MMAT35A Page 5 of 5

Label and Location FCC ID : MMAT35A Page 1 of 1

www.kes.co.kr FCC ID : MMAT35A Page 1 of 2 EUT Internal photographs Helical Antenna www.kes.co.kr FCC ID : MMAT35A Page 2 of 2

3) LCD become on display such as belows. Press the Up or Down button to align if necessory each step. Display Default value ① GMRS Maximum Deviation Alignment td 0b Test frequency ; 462.5625MHz ① GMRS Squelch Alignment gr 09 Test frequency ; 462.7125MHz 7. Memory clear by press and holding the Up button then turn on the radio. 5. Receiver Squelch Alignment 1) TP(ALG) is short to GND. 2) Go to RX squelch alignment mode by press and holding the Down button then turn on the radio. Display Default value 3) LCD become on display such as belows. Press the Up or Down button to align if necessory each step. T35A Alignment Procedure 2015. 07. 14. 1. VCO Alignment ; Fixed. 2. Transmitter Frequency Alignment 8. If TP(ALG) is short to GND, Alignment mode is enable. If TP(ALG) is open to GND, Alignment mode is 6. Charging Stop Voltage Alignment ; Fixed 4.30V 1) Set the unit at channel 1.(462.5625MHz) Press the PTT button so the unit will be in transmit mode. 2)Adjust CT1 trimmer until Fc +/- 200Hz. 4. Maximum Audio Deviation 2) Go to Max. deviation alignment mode by press and holding the Call button then turn on the radio. 3. Transmitter Output Power at conducted condition. 3) TX power check the 26dBm +/- 1dBm. 1) TP(ALG) is short to GND. 1) Set the power supply at 3.6Vdc. Set the unit at ch 1.(462.5625MHz) 2) Press the PTT button so the unit will be in transmit mode.

GLOBAL LINK CORP. LTD. T35A Series - Bill of Material Dwg. No. :T35A-BOM-M-06 Rev. Date: 13/06/15 C1CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C10CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C104CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C11CHIP CAPACITOR 0402 X7R +/- 10%0.1UF (X7R)1YageoYageo C115NAPA-TKR12-B00497-Oct-14 C12CHIP CAPACITOR 0603 Y5V1UF1YageoYageo C122CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C125CHIP CAPACITOR 0402 X7R ±10%0.001UF1YageoYageo C129NAPA-TKR12-B003531-Jul-14 C13CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C133CHIP CAPACITOR 0805 X5R ±10%10UF/10V (05)1MurataAsung C14CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C140CHIP CAPACITOR 0402 X7R ±10%470P(X7R)1YageoYageoPA-TKR12-B008712-Jun-15 C142CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageoPA-TKR12-B00497-Oct-14 C144CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C145CHIP CAPACITOR 0402 X7R ±10%0.001UF1YageoYageo C148CHIP CAPACITOR 0402 NPO ±0.25PF5P1YageoYageoPA-TKR12-B000725-Mar-14 C15CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C16CHIP CAPACITOR 0603 Y5V1UF1YageoYageo C162CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C166CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C17CHIP CAPACITOR 0603 NPO ±0.25PF6P(03)1YageoYageoPA-TKR12-B000725-Mar-14 C172CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C173CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C174CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C177NAPA-TKR12-B003531-Jul-14 C178CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C179CHIP CAPACITOR 0402 NPO ±5%22P1YageoYageo C17ACHIP CAPACITOR 0402 NPO ±0.25PF1P1YageoYageoPA-TKR12-B00497-Oct-14 C18CHIP CAPACITOR 0603 Y5V2.2UF(03)1YageoYageo C182CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C19CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C2CHIP CAPACITOR 0603 NPO ±5%100P(0603)1YageoYageo C20CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C207CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C208CHIP CAPACITOR 0402 NPO ±5%33P1YageoYageo C209CHIP CAPACITOR 0402 NPO ±5%33P1YageoYageo C21CHIP CAPACITOR 0402 NPO ±0.25PF7P1YageoYageo C22CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C23CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageoPA-TKR12-B000725-Mar-14 C24CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C25CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C26CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C27CHIP CAPACITOR 0402 NPO ±5%12P1YageoYageo C28CHIP CAPACITOR 0603 Y5V1UF1YageoYageo C29CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C3CHIP CAPACITOR 0402 X7R ±10%0.001UF1YageoYageo C30CHIP CAPACITOR 0603 NPO ±0.25PF6P(03)1YageoYageo C304CHIP CAPACITOR 0402 NPO ±0.25PF3P1YageoYageo C31CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B008712-Jun-15 C32CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B008712-Jun-15 C33CHIP CAPACITOR 0805 X5R ±10%10UF/10V (05)1MurataAsung C34NAPA-TKR12-B000625-Mar-14 C35CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C36CHIP CAPACITOR 0402 NPO ±0.25PF6P1YageoYageo C37CHIP CAPACITOR 0402 NPO ±0.25PF8P1YageoYageoPA-TKR12-B003531-Jul-14 C38CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C39CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C3ACHIP CAPACITOR 0603 NPO ±0.25PF4P(03)1YageoYageo C4CHIP CAPACITOR 0402 NPO ±0.25PF5P1YageoYageoPA-TKR12-B003531-Jul-14 C40CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C41CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C42CHIP CAPACITOR 0402 X7R ±10%0.001UF1YageoYageoPA-TKR12-B003531-Jul-14 C43Elect capacitor 220UF/6.3v (5x11)KR3-6.3V221MA1SamconSamcon C44CHIP CAPACITOR 0402 X7R ±10%0.0018UF1YageoYageoPA-TKR12-B00497-Oct-14 C45CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C46CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C47CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C48CHIP CAPACITOR 0805 X5R ±10%10UF/10V (05)1MurataAsung C49CHIP CAPACITOR 0402 X7R ±10%0.01UF1YageoYageo C5CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B003531-Jul-14 C50CHIP CAPACITOR 0603 Y5V1UF1YageoYageo C51CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C52CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C53CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo C54CHIP CAPACITOR 0402 X7R +/- 10%470P(X7R)1YageoYageo C55CHIP CAPACITOR 0402 X7R +/- 10%0.1UF (X7R)1YageoYageo C56CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C57CHIP CAPACITOR 0402 X7R ±10%0.01UF1YageoYageoPA-TKR12-B003531-Jul-14 C58CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B000625-Mar-14 C59CHIP CAPACITOR 0402 NPO ±5%10P1YageoYageoPA-TKR12-B000725-Mar-14 C6CHIP CAPACITOR 0603 NPO ±0.25PF9P(03)1YageoYageoPA-TKR12-B000725-Mar-14 C60CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C61CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C62CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C63CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B000625-Mar-14 C64CHIP CAPACITOR 0402 NPO ±0.25PF7P1YageoYageo C65CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B000625-Mar-14 C66CHIP CAPACITOR 0402 NPO ±5%10P1YageoYageoPA-TKR12-B000625-Mar-14 C67CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C68CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C69CHIP CAPACITOR 0402 NPO ±5%18P1YageoYageoPA-TKR12-B003531-Jul-14 C7CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C70CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C71CHIP CAPACITOR 0402 NPO ±5%9P1YageoYageoPA-TKR12-B000625-Mar-14 C72CHIP CAPACITOR 0603 Y5V1UF1YageoYageoPA-TKR12-B00497-Oct-14 C73CHIP CAPACITOR 0402 X7R ±10%0.01UF1YageoYageo C74CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C75CHIP CAPACITOR 0402 X7R ±10%0.001UF1YageoYageoPA-TKR12-B008712-Jun-15 C76CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C77CHIP CAPACITOR 0402 X7R ±10%0.01UF1YageoYageo C78CHIP CAPACITOR 0402 X7R ±10%0.01UF1YageoYageoPA-TKR12-B008712-Jun-15 C79CHIP CAPACITOR 0805 X5R ±10%10UF/10V (05)1MurataASKOPA-TKR12-B008712-Jun-15 C8CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C80CHIP CAPACITOR 0402 NPO ±5%100P1YageoYageo C81NAPA-TKR12-B003531-Jul-14 C85CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageo Remark1st Vendor ECO Ref.NoQ'tyManufacturerDescriptionItems Global Link Corporation Confidential Proprietary page1/3 GLOBAL LINK CORP. LTD. T35A Series - Bill of Material Dwg. No. :T35A-BOM-M-06 Rev. Date: 13/06/15 Remark1st Vendor ECO Ref.NoQ'tyManufacturerDescriptionItems C86CHIP CAPACITOR 0402 Y5V0.1UF1YageoYageoPA-TKR12-B000725-Mar-14 C87NAPA-T…

Text truncated - open the document above for the full version.

Test Lab System DUT: Di Commun Medium Phanto m Measure m DASY4 C      Flat-Sec Maximum Flat-Sec Referenc Peak SAR SAR(1 g Maximum oratory: KES verification ipole 450 MH nication System parameters us m section: Flat ment Standard Configuration Probe: ES3DV Sensor-Surfac Electronics: D Phantom: EL Measuremen t ction_HSL_ m value of SA ction_HSL_ ce Value = 36. R (extrapolate g) = 1.15 mW/ m value of SA Co., Ltd. n_450_HSL Hz; Type: D45 m: CW; Frequ sed: f = 450 M Section d: DASY4 (H n: V3 - SN3315; ce: 4mm (Mec DAE4 Sn1344 I v5.0_2013_0 t SW: DASY4 _450/Area Sc AR (interpolat _450/Zoom S .7 V/m; Powe ed) = 1.72 W/k /g; SAR(10 g) AR (measured) 50V3; Serial: uency: 450 M MHz; σ = 0.83 igh Precision ; ConvF(6.91, chanical Surfa 4; Calibrated: 01_23; Type: 4, V4.7 Build can (41x201 ed) = 1.20 mW Scan (7x7x7) r Drift = -0.06 kg ) = 0.810 mW ) = 1.22 mW/g : D450V3 - SN MHz;Duty Cycl 5 mho/m; ε r = Assessment) , 6.91, 6.91); C ace Detection) 2014-11-12 QDOVA002 A 80; Postproce x1): Measure W/g )/Cube 0: M 63 dB W/g /g D N:1081 le: 1:1 = 43.6; ρ = 100 Calibrated: 20 ) AA; Serial: TP essing SW: SE ement grid: dx Measurement g Date/Time: 20 00 kg/m 3 015-05-27 P:1190 EMCAD, V1.8 x=15mm, dy= rid: dx=5mm, 15-08-20 AM 8 Build 186 =15mm , dy=5mm, dz M 10:42:10 z=5mm Test Lab System DUT: Di Commun Medium Phanto m Measure m DASY4 C      Flat-Sec Maximum Flat-Sec Referenc Peak SAR SAR(1 g Maximum oratory: KES verification ipole 450 MH nication System parameters us m section: Flat ment Standard Configuration Probe: ES3DV Sensor-Surfac Electronics: D Phantom: EL Measuremen t ction_MSL_ m value of SA ction_MSL_ ce Value = 33. R (extrapolate g) = 1.07 mW/ m value of SA Co., Ltd. n_450_MSL Hz; Type: D45 m: CW; Frequ sed: f = 450 M Section d: DASY4 (H n: V3 - SN3315; ce: 4mm (Mec DAE4 Sn1344 I v5.0_2013_0 t SW: DASY4 _450/Area S AR (interpolat _450/Zoom S .8 V/m; Powe ed) = 1.61 W/k /g; SAR(10 g) AR (measured) 50V3; Serial: uency: 450 M MHz; σ = 0.91 igh Precision ; ConvF(6.99, chanical Surfa 4; Calibrated: 01_23; Type: 4, V4.7 Build can (41x201 ed) = 1.13 mW Scan (7x7x7 r Drift = 0.089 kg ) = 0.734 mW ) = 1.14 mW/g : D450V3 - SN MHz;Duty Cycl mho/m; ε r = Assessment) , 6.99, 6.99); C ace Detection) 2014-11-12 QDOVA002 A 80; Postproce 1x1): Measur W/g 7)/Cube 0: M 9 dB W/g /g D N:1081 le: 1:1 58.7; ρ = 100 0 Calibrated: 20 ) AA; Serial: TP essing SW: SE ement grid: dx Measurement g Date/Time: 20 0 kg/m 3 015-05-27 P:1190 EMCAD, V1.8 x=15mm, dy= grid: dx=5mm 15-08-21 AM 8 Build 186 =15mm m, dy=5mm, dz M 11:48:42 z=5mm Plot 1 Test Lab Face_G DUT: T Commun Medium kg/m 3 Phanto m Measure DASY4      Face_G dx=15m Info: In t Maximu Face_G grid: dx= Referenc Peak SA SAR(1 g Info: In t Maximu boratory: KE GMRS_Ana T35A; Type: nication Sys m parameters m section: Fla ement Standa Configurati Probe: ES3 D Sensor-Surfa Electronics: Phantom: E L Measuremen GMRS_Ana mm, dy=15mm terpolated me um value of S GMRS_Ana =5mm, dy=5 ce Value = 1 AR (extrapola g) = 0.240 m terpolated me um value of S ES Co., Ltd. alog_25mm Bar; Serial tem: CW; Fr used (interp at Section ard: DASY4 on: DV3 - SN331 face: 4mm (M DAE4 Sn13 LI v5.0_2013 nt SW: DAS alog_25mm m edium param SAR (interpo alog_25mm 5mm, dz=5m 17.7 V/m; Po ated) = 0.314 mW/g; SAR( edium param SAR (measu m Gap_462. l: N/A requency: 46 olated): f = 4 (High Preci 15; ConvF(6 Mechanical S 344; Calibrat 3_01_23; Ty Y4, V4.7 Bu m Gap_462. meters used fo olated) = 0.2 m Gap_462. mm ower Drift = 4 W/kg 10 g) = 0.18 meters used fo red) = 0.250 .6375 62.637 MHz; 462.637 MH sion Assessm 6.91, 6.91, 6.9 Surface Detec ted: 2014-11 ype: QDOVA uild 80; Postp .6375/Area for SAR eval 54 mW/g .6375/Zoom -0.160 dB 86 mW/g for SAR eval 0 mW/g Da ;Duty Cycle: Hz; σ = 0.854 ment) 91); Calibrat ction) -12 A002AA; Ser processing S a Scan (51x luation. m Scan (7x7 luation. ate/Time: 201 1:1 mho/m; ε r = ted: 2015-05 rial: TP:1190 W: SEMCA 111x1): Me 7x7)/Cube 15-08-20 PM = 43.4; ρ = 10 -27 0 AD, V1.8 Bui easurement g 0: Measurem M 4:24:20 000 ild 186 grid: ment Plot 2 Test Lab Face_F DUT: T Commun Medium kg/m 3 Phanto m Measure DASY4      Face_F dx=15m Info: In t Maximu Face_F dx=5mm Referenc Peak SA SAR(1 g Info: In t Maximu boratory: KE FRS_Analo T35A; Type: nication Sys m parameters m section: Fla ement Standa Configurati Probe: ES3 D Sensor-Surfa Electronics: Phantom: E L Measuremen FRS_Analo mm, dy=15mm terpolated me um value of S FRS_Analo m, dy=5mm, ce Value = 1 AR (extrapola g) = 0.240 m terpolated me um value of S ES Co., Ltd. g_25mm G Bar; Serial tem: CW; Fr used (interp at Section ard: DASY4 on: DV3 - SN331 face: 4mm (M DAE4 Sn13 LI v5.0_2013 nt SW: DAS g_25mm G m edium param SAR (interpo g_25mm G dz=5mm 17.4 V/m; Po ated) = 0.312 mW/g; SAR( edium param SAR (measu Gap_467.63 l: N/A requency: 46 olated): f = 4 (High Preci 15; ConvF(6 Mechanical S 344; Calibrat 3_01_23; Ty Y4, V4.7 Bu Gap_467.63 meters used fo olated) = 0.24 Gap_467.63 ower Drift = 2 W/kg 10 g) = 0.18 meters used fo red) = 0.248 375 67.637 MHz; 467.637 MH sion Assessm 6.91, 6.91, 6.9 Surface Detec ted: 2014-11 ype: QDOVA uild 80; Postp 375/Area Sc for SAR eval 46 mW/g 375/Zoom S -0.055 dB 88 mW/g for SAR eval mW/g Da ;Duty Cycle: Hz; σ = 0.864 ment) 91); Calibrat ction) -12 A002AA; Ser processing S can (51x111 luation. Scan (7x7x7 luation. ate/Time: 201 1:1 mho/m; ε r = ted: 2015-05 rial: TP:1190 W: SEMCA 1x1): Measu 7)/Cube 0: M 15-08-20 PM = 43.4; ρ = 10 -27 0 AD, V1.8 Bui urement grid Measuremen M 4:00:27 000 ild 186 d: nt grid: Plot 3 Test Lab Body_G DUT: T Commun Medium kg/m 3 Phanto m Measure DASY4      Body_G dx=15m Info: In t Maximu Body_G dx=5mm Referenc Peak SA SAR(1 g Info: In t Maximu boratory: KE GMRS_An T35A; Type: nication Sys m parameters m section: Fla ement Standa Configurati Probe: ES3 D Sensor-Surfa Electronics: Phantom: E L Measuremen GMRS_An mm, dy=15mm terpolated me um value of S GMRS_An m, dy=5mm, ce Value = 2 AR (extrapola g) = 0.448 m terpolated me um value of S ES Co., Ltd. n…

Text truncated - open the document above for the full version.

KES Co., Ltd. C-3701, Simin-daero 365-40, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-15T0018 Page (2 ) of (20) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The test results in the report only apply to the tested sample. KES-P-5101-14 Rev. 1 KES A4 Revision history Revision Date of issue Test report No. Description - 2015.08.26 KES-SR-15T0018Initial KES Co., Ltd. C-3701, Simin-daero 365-40, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-SR-15T0018 Page (3 ) of (20) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The test results in the report only apply to the tested sample. KES-P-5101-14 Rev. 1 KES A4 TABLE OF CONTENTS 1. General information ................................................................................................................................................... 4 1.1. EUT description ........................................................................................................................................ 4 1.2. Short description of the equipment under test(EUT) ................................................................................. 4 1.3. Highest SAR summary .............................................................................................................................. 4 1.4. Guidance applied ....................................................................................................................................... 5 1.5. Test conditions ........................................................................................................................................... 5 1.6. SAR definition ........................................................................................................................................... 5 1.7. Accessories of EUT ................................................................................................................................... 6 2. SAR measurement system .......................................................................................................................................... 7 2.1. Robot ......................................................................................................................................................... 8 2.2. Probe ......................................................................................................................................................... 8 2.3. Data Acquisition Electronics (DAE) ......................................................................................................... 9 2.4. Phantoms ................................................................................................................................................... 9 2.5. Device holder .......................................................................................................................................... 10 3. SAR measurement procedure ................................................................................................................................... 11 4. Tissue simulating liquids .......................................................................................................................................... 13 5. System verification ................................................................................................................................................... 14 5.1. Procedure ................................................................................................................................................. 14 5.2. System verification .................................................................................................................................. 14 6. RF exposure limits ................................................................................................................................................... 15 7. Test results summary ................................................................................................................................................ 16 7.1. RF conducted power ................................................................................................................................ 16 7.1.1. Power measurement procedures ...................................................................................................... 16 7.1.2. RF conducted power ....................................................................................................................... 16 7.1.2. Target power and Tune-up limits .................................................................................................... 16 7.2. SAR results .............................................................................................................................................. 17 7.2.1. SAR measurement results ............................................................................................................... 17 8. Measurement equipments ......................................................................................................................................... 18 9. Measurement Uncertainty ........................................................................................................................................ 19 Appendix list..................................................................................................................................................................... 20 Appendix A. DASY4 report ...................................................................................................................................... 20 Appendix B. Calibration certificate ....................................................................…

Text truncated - open the document above for the full version.

KES Co., Ltd. C-3701, Simin-daero 365-40, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-RF-15T0055 Page (2 ) of (28) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The test results in the report only apply to the tested sample. KES-P-5101-14 Rev. 1 KES A4 Revision history Revision Date of issue Test report No. Description - 2015.08.25 KES-RF-15T0055Initial KES Co., Ltd. C-3701, Simin-daero 365-40, Dongan-gu, Anyang-si, Gyeonggi-do, 14057, Korea Tel: +82-31-425-6200 / Fax: +82-31-424-0450 www.kes.co.kr Test report No.: KES-RF-15T0055 Page (3 ) of (28) This report shall not be reproduced except in full, without the written approval of KES Co., Ltd. The test results in the report only apply to the tested sample. KES-P-5101-14 Rev. 1 KES A4 TABLE OF CONTENTS 1. General information .................................................................................................................................................... 4 1.1. EUT description ........................................................................................................................................ 4 1.2. Test configuration ...................................................................................................................................... 4 1.3. Frequency/channel operations ................................................................................................................... 5 1.4. Information about derivative model .......................................................................................................... 5 1.5. Conclusion of worst-case for each mode of representative channel respectively ...................................... 6 2. Summary of tests ...................................................................................…

Text truncated - open the document above for the full version.