MMURTI2000TXB-ZBM

TXB-ZBM Module Installation Instructions Purpose of the TXB-ZBM Module The TXB-ZBM Module (“module”) is a module that can be installed in applicable Remote Technologies Inc. (“RTI”) products only. This module is not sold retail by RTI, nor is it provided by RTI as an OEM product to other manufacturers or companies for installation into their products. RTI and its authorized Contract Manufacturers are the only authorized installers of this module and it is not provided as a field or end-user upgrade. When properly and permanently installed in an applicable RTI product, the module will provide 2.4GHz Zigbee communication only with other RTI Zigbee enabled devices. Installation Instructions When the module is installed in an RTI product it is permanently affixed to the host product and cannot be removed without the use of additional equipment. This module is also not visible, nor accessible by the end-user. Any attempted access or removal of the module by anyone other than RTI or its authorized Contract Manufacturers is strictly prohibited. When installed in a host RTI product, the host RTI product will display verbiage to the effect of the following in accordance with FCC 47 CFR Part 15 Section 15.212: Contains Transmitter Module FCC ID: MMURTI2100 Contains IC: 3166A‐RTI2100 or Contains FCC ID: MMURTI2100 Contains IC: 3166A‐RTI2100 The Operation Manual of the host RTI product will also display the following information in accordance with FCC 47 CFR Part 15 Section 15.19: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the device. This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Cet appareil est conforme à la partie 15 de la réglementation de la FCC et Industrie Canada exempts de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions suivantes : ( 1 ) Ce dispositif ne peut causer des interférences nuisibles . ( 2 ) Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent causer fonctionnement indésirable

FCC Compliance Opinion 2015-1-14 REMT0002 Information about the Applicant Grantee (Company Name) Remote Technologies, Inc. FCC Contact Person John Demskie Address 5775 12th Avenue East, Suite 180 City, State, Zip Shakopee, MN 55379 Job Number REMT0002 Model TXB-ZBM FCC ID MMURT12000 Agent Kevin Marty Approval Type Original Equipment Class DTS Digital Transmission System Rule Part 15.247 Overview The TXB-ZBM transceiver IC is an integrated microprocessor and Zigbee transceiver. Remote Technologies, Inc. is seeking full modular approval. Confidentiality requested for allowed files. Request is properly addressed and referenced. A letter listing the applicable modular requirements was submitted. Recommendation All items have been resolved and completed to my satisfaction; therefore I recommend this application for approval. Signature Dave Tolman, TCB Committee 2/16/2015

TXB-ZBM Module Labeling Information Labeling Information When the TXB-ZBM Module is installed in an RTI product it is permanently affixed to the host product and cannot be removed without the use of additional equipment. This TXB-ZBM Module is also not visible, nor accessible by the end-user. Any attempted access or removal of the TXB-ZBM Module by anyone other than RTI or its authorized Contract Manufacturers is strictly prohibited. The TXB-ZBM Module will contain the following Identifiers in accordance with FCC 47 CFR Part 15, Section 19 and FCC 47 CFR Part 2, Section 925 and Industry Canada license-exempt standard(s): FCC ID: MMURTI2000 IC: 3166A-RTI2000 The Identifiers will be displayed on the TXB-ZBM Module via a permanent silkscreen on the printed circuit board. When installed in a host RTI product, the host RTI product will display verbiage to the effect of the following in accordance with FCC 47 CFR Part 15, Section 212 and Industry Canada license-exempt standard(s): Contains Transmitter Module FCC ID: MMURTI2000 Contains IC: 3166A‐RTI2000 or Contains FCC ID: MMURTI2000 Contains IC: 3166A‐RTI2000 The Operation Manual of the host RTI product will also display the following information in accordance with FCC 47 CFR Part 15, Section 19 and Industry Canada license-exempt standard(s): This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. N27917 Contains: FCC ID: MMUxxxxxxx, IC:3166A‐xxxx FCC ID: MMUxxxxxxx, IC:3166A‐xxxx

TXB-ZBM Module Operational Description Purpose of the TXB-ZBM Module The intended use of the TXB-ZBM Module is to provide bi-directional 2.4GHz communication between products containing the TXB-ZBM or like 2.4GHz transceiver. TXB-ZBM Transceiver The TXB-ZBM transceiver IC is an integrated microprocessor and Zigbee transceiver. The microprocessor runs off of a 24MHz crystal. When a user presses a command on a bi-directional enabled remote control, for example, containing the TXB-ZBM to start the play control on a DVD Player, the TXB-ZBM module will take in RS232 data from the remote control and using Offset Quadrature Phase Shift Keying (OQPSK) modulation, it transmits a 2.4GHz command. When receiving data, it receives the 2.4GHz signal from the source, and converts the signal to serial data that is then transmitted to the destination control product, in this case, the remote control. TXB-ZBM Antenna The TXB-ZBM Transceiver Module utilizes the Antenova A5645 SMD Antenna. It is a 20.5mm x 3.6mm x 3.3mm surface mount antenna with a peak gain of 1.8dBi designed for 2.4GHz applications. This antenna is not externally accessible when the module is installed in an end product.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety Remote Technologies, Inc. TXB-ZBM Mini-Zigbee Transceiver Module FCC 2.1093:2015 Report # REMT0002.5 NVLAP Lab Code: 200881-0 CERTIFICATE OF TEST 2014-12-10 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Last Date of Test: January 20, 2015 Remote Technologies, Inc. Model: TXB-ZBM Mini-Zigbee Transceiver Module Radio Equipment Testing Standards Specification Method FCC 2.1093:2015 447498 D01 General RF Exposure Guidance v05r02 Results Method Clause Test Description Applied Results Comments 4.3 General SAR test reduction and exclusion guidance Yes Pass Deviations From Test Standards None Approved By: Greg Kiemel, Director of Engineering Report No. REMT0002.52/7 REVISION HISTORY REV 2014.10.14 Revision Number Description Date Page Number 00 None Report No. REMT0002.53/7 ACCREDITATIONS AND AUTHORIZATIONS REV 2014.10.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC Guide 65 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFTA – Recognized by OFTA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ Report No. REMT0002.54/7 FACILITIES REV 2015.1.05 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-08, MN10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 685-0796 Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 9801 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Report No. REMT0002.55/7 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: Remote Technologies, Inc. Address: 5775 12th Avenue East, Suite 180 City, State, Zip: Shakopee, MN 55379 Test Requested By: Mark Melville Model: TXB-ZBM Mini-Zigbee Transceiver Module Evaluation Date: January 20, 2015 Information Provided by the Party Requesting the Test Functional Description of the EUT: Zigbee radio module operating in the 2.4 GHz band. Testing Objective: To demonstrate compliance with FCC requirements for RF exposure for 2.1093 portable devices. Report No. REMT0002.56/7 SAR TEST EXCLUSION WTD.2014.12.17 OVERVIEW The device is excluded from SAR evaluation and therefore deemed compliant with FCC RF exposure requirements as described below: COMPLIANCE WITH FCC KDB 447498 D01 General RF Exposure Guidance v05r02 KDB 447498 D01 General RF Exposure Guidance v05r02, Section 4.3.1 “The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion.” METHOD OF EVALUATION The SAR Test Exclusion Threshold is summarized in the following table: The device has a maximum output power of 0.001859 mW at 2405 MHz. The closest spacing of the antenna to the user’s torso is 5 cm. The table below shows the results of the calculation. The value of 0.0006 is well below the exclusion threshold of 3.0, therefore the unit is excluded from SAR evaluation and deemed compliant wi…

Text truncated - open the document above for the full version.

This report must not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government of the United States of America. This Report may only be duplicated in its entirety Remote Technologies, Inc. TXB-ZBM Mini-Zigbee Transceiver Module FCC 15.247:2015 Report # REMT0002.1 NVLAP Lab Code: 200881-0 CERTIFICATE OF TEST 2014-12-10 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. Last Date of Test: January 07, 2015 Remote Technologies, Inc. Model: TXB-ZBM Mini-Zigbee Transceiver Module Radio Equipment Testing Standards Specification Method FCC 15.207:2015 ANSI C63.10:2009 FCC 15.247:2015 ANSI C63.10:2009 KDB 558074 V3 Results Method Clause Test Description Applied Results Comments 6.2 AC Powerline Conducted Emissions Yes Pass 6.5, 6.6 Spurious Radiated Emissions Yes Pass 6.7 Spurious Conducted Emissions Yes Pass 6.7 Band Edge Compliance Yes Pass 6.9.1 Occupied Bandwidth Yes Pass 6.10.2 Output Power Yes Pass 6.11.2 Power Spectral Density Yes Pass 7.5 Duty Cycle Yes Pass Deviations From Test Standards None Approved By: Kyle Holgate, Operations Manager Report No. REMT0002.12/49 REVISION HISTORY REV 2014.10.14 Revision Number Description Date Page Number 00 None Report No. REMT0002.13/49 ACCREDITATIONS AND AUTHORIZATIONS REV 2014.10.08 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Accredited by A2LA to ISO / IEC Guide 65 as a product certifier. This allows Northwest EMC to certify transmitters to FCC and IC specifications. NVLAP - Each laboratory is accredited by NVLAP to ISO 17025 Canada IC - Recognized by Industry Canada as a Certification Body (CB). Certification chambers and Open Area Test Sites are filed with IC. European Union European Commission – Validated by the European Commission as a Conformity Assessment Body (CAB) under the EMC directive and as a Notified Body under the R&TTE Directive. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIP / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. Singapore IDA – Recognized by IDA as a CAB for the acceptance of test data. Israel MOC – Recognized by MOC as a CAB for the acceptance of test data. Hong Kong OFTA – Recognized by OFTA as a CAB for the acceptance of test data. Vietnam MIC – Recognized by MIC as a CAB for the acceptance of test data. SCOPE For details on the Scopes of our Accreditations, please visit: http://www.nwemc.com/accreditations/ Report No. REMT0002.14/49 MEASUREMENT UNCERTAINTY TMU.2014.12.03 Measurement Uncertainty When a measurement is made, the result will be different from the true or theoretically correct value. The difference is the result of tolerances in the measurement system that cannot be completely eliminated. To the extent that technology allows us, it has been our aim to minimize this error. Measurement uncertainty is a statistical expression of measurement error qualified by a probability distribution. A measurement uncertainty estimation has been performed for each test per our internal quality document WP 342. The estimation is used to compare the measured result with its "true" or theoretically correct value. The expanded measurement uncertainty (K=2) for each test is on each data sheet. Our measurement data meets or exceeds the measurement uncertainty requirements of the applicable specification; therefore, the test data can be compared directly to the specification limit to determine compliance. The calculations for estimating measurement uncertainty are based upon ETSI TR 100 028 (or CISPR 16-4-2 as applicable), and are available upon request. The following table represents the Measurement Uncertainty (MU) budgets for each of the tests that may be contained in this report. Test + MU - MU Frequency Accuracy (Hz) 0.0007% -0.0007% Amplitude Accuracy (dB) 1.2 dB -1.2 dB Conducted Power (dB) 0.3 dB -0.3 dB Radiated Power via Substitution (dB) 0.7 dB -0.7 dB Temperature (degrees C) 0.7°C -0.7°C Humidity (% RH) 2.5% RH -2.5% RH Voltage (AC) 1.0% -1.0% Voltage (DC) 0.7% -0.7% Field Strength (dB) 4.7 dB -4.7 dB AC Powerline Conducted Emissions (dB) 2.9 dB -2.9 dB Report No. REMT0002.15/49 FACILITIES REV 2015.1.05 California Labs OC01-13 41 Tesla Irvine, CA 92618 (949) 861-8918 Minnesota Labs MN01-08, MN10 9349 W Broadway Ave. Brooklyn Park, MN 55445 (612)-638-5136 New York Labs NY01-04 4939 Jordan Rd. Elbridge, NY 13060 (315) 685-0796 Oregon Labs EV01-12 22975 NW Evergreen Pkwy Hillsboro, OR 97124 (503) 844-4066 Texas Labs TX01-09 3801 E Plano Pkwy Plano, TX 75074 (469) 304-5255 Washington Labs NC01-05 19201 120 th Ave NE Bothell, WA 9801 (425)984-6600 NVLAP NVLAP Lab Code: 200676-0 NVLAP Lab Code: 200881-0 NVLAP Lab Code: 200761-0 NVLAP Lab Code: 200630-0 NVLAP Lab Code:201049-0 NVLAP Lab Code: 200629-0 Industry Canada 2834B-1, 2834B-3 2834E-1 N/A 2834D-1, 2834D-2 2834G-1 2834F-1 BSMI SL2-IN-E-1154R SL2-IN-E-1152R N/A SL2-IN-E-1017 SL2-IN-E-1158R SL2-IN-E-1153R VCCI A-0029 A-0109 N/A A-0108 A-0201 A-0110 Report No. REMT0002.16/49 PRODUCT DESCRIPTION 2014-12-10 Client and Equipment Under Test (EUT) Information Company Name: Remote Technologies, Inc. Address: 5775 12th Avenue East, Suite 180 City, State, Zip: Shakopee, MN 55379 Test Requested By: Mark Melville Model: TXB-…

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2014.10.14 PSA-ESCI 2014.09.10, EmiR5 2014.11.10 photo REMT0002 FCC SE MD.gif SE 002.jpg SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.09.10 Report No. REMT0002.12/9 photo SE 003.jpg SE 004.jpg SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.09.10 Report No. REMT0002.13/9 photo SE 005.jpg SPURIOUS RADIATED EMISSIONS PSA-ESCI 2014.09.10 Report No. REMT0002.14/9 SPURIOUS CONDUCTED EMISSIONS XMit 2014.02.07 NORTHWEST SPURIOUS CONDUCTED EMISSIONS NweTx 2014.11.06 EMC DC 001.jpg SPURIOUS CONDUCTED EMISSIONS Report No. REMT0002.15/9 BAND EDGE COMPLIANCE XMit 2014.02.07 NORTHWEST BAND EDGE COMPLIANCE NweTx 2014.11.06 EMC DC 001.jpg BAND EDGE COMPLIANCE Report No. REMT0002.16/9 OCCUPIED BANDW IDTH XMit 2014.02.07 NORTHWEST OCCUPIED BANDWIDTH NweTx 2014.11.06 EMC DC 001.jpg OCCUPIED BANDWIDTH Report No. REMT0002.17/9 OUTPUT POWER XMit 2014.02.07 NORTHWEST OUTPUT POWER NweTx 2014.11.06 EMC DC 001.jpg OUTPUT POWER Report No. REMT0002.18/9 POWER SPECTRAL DENSITY XMit 2014.02.07 NORTHWEST POWER SPECTRAL DENSITY NweTx 2014.11.06 EMC DC 001.jpg POWER SPECTRAL DENSITY Report No. REMT0002.19/9