MVU10148Wireless handheld remote key fob device for PINPOINT

engi FCC and IC Compliance Statement PINPOINT KEY FOB, FCC ID ‑ MVU10148 ACMA: N2523 IC: 6094A‑09291, 6094A‑09305 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received including interference that may cause undesired operation. This device complies with FCC Rules. Changes or modifications not expressly approved by MotorGuide could void the user's authority to operate the equipment. The MotorGuide Pinpoint GPS System complies with Industry Canada RSS‑210 standard. See RSS‑GEN 7.1.5. The term "IC:" before the certification/registration number only signifies that registration was performed based on a Declaration of Conformity indicating that Industry Canada technical specifications were met. The term "IC:" before the certification/registration number does not imply that Industry Canada approved the equipment. EU Compliance Statement Attwood Corporation hereby declares that the Motorguide Pinpoint GPS System is in compliance with the essential requirements and other relevant provisions of the 99/5/EC R&TTE directive. A copy of the original CE Declaration of Conformity is on our website at http://www.motorguide.com/support/certifications. © 2013 Mercury Marine Pinpoint GPS 90-8M0086988 1113 iieng Environmental Compliance Statement All MotorGuide products that are subject to the 2002/96/EC WEEE directive are compliant with the WEEE marking requirement. Such products are marked with the "crossed‑out wheelie bin" WEEE symbol (shown, below) in accordance with European Standard EN50419. 54539 The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product. Thank You Thank you for purchasing the MotorGuide Pinpoint GPS Navigation system. The Pinpoint GPS Navigation System is designed to enhance the precision control and functionality of your MotorGuide trolling motor. We're confident that the Pinpoint GPS will enhance your fishing experience and we appreciate that you chose MotorGuide. engiii Warranty Message The product you have purchased comes with a Limited Warranty from MotorGuide. The terms of the policy are set forth in the Warranty Information section of this manual. The policy statement contains a description of the duration of coverage, important disclaimers and limitations of damages, and other related information. Please review this important information. The description and specifications contained herein were in effect at the time this manual was approved for printing. MotorGuide, whose policy is one of continued improvement, reserves the right to discontinue models at any time, to change specifications, designs, methods, or procedures without notice and without incurring obligation. MotorGuide, Lowell, Michigan U.S.A. © 2013, Mercury Marine Mercury, Mercury Marine, and MotorGuide are registered trademarks of Brunswick Corporation. Mercury Product Protection logo is a registered service mark of Brunswick Corporation. Eagle and Lowrance are registered trademarks of Navico Inc. Garmin is a registered trademark of Garmin Ltd. Humminbird is a registered trademark of Johnson Outdoors Marine Electronics, Inc. Vexilar is a registered trademark of Vexilar, Inc. iveng engv Warranty Information MotorGuide Two Year Limited Warranty............................................. 1 Product Installation and Operation Installing the Pinpoint GPS Modules................................................... 4 Operating the Pinpoint GPS System................................................. 15 Owner Service Assistance Frequently Asked Questions and Troubleshooting........................... 32 Service Assistance............................................................................ 33 Mercury Marine/MotorGuide Service Offices.....................................33 vieng WARRANTY INFORMATION eng1 MotorGuide Two Year Limited Warranty KEEP YOUR ORIGINAL PURCHASE RECEIPT OR BILL OF SALE. 1. For recreational use customers, Pinpoint GPS components are warranted to the original retail purchaser to be free from defects in material or workmanship for a period of two years from the date of purchase. 2. To obtain warranty service, the purchaser should deliver or return the unit (postage prepaid and insured) to any MotorGuide authorized service dealer. DO NOT RETURN TO PLACE OF PURCHASE unless they are an authorized service center. Products returned by mail should be carefully packaged and include a note describing the nature of the problem and/or service requested, customer address, and phone number. A copy of the receipt, bill of sale, registration verification or other proof of purchase is required with the return of the product for warranty consideration. Warranty claims will not be accepted without presentation of purchase receipt for the trolling motor, other verification of registration, or bill of sale for a boat package. 3. MotorGuide, at its discretion, will repair or replace items covered under the terms of this warranty. Neither MotorGuide nor MotorGuide service dealers are responsible for damages to MotorGuide products due to repairs performed by anyone other than an authorized MotorGuide service dealer. Neither MotorGuide nor Attwood is responsible for failure or damage caused by improper installation, set‑up, preparation, or previous service or …

Text truncated - open the document above for the full version.

Pinpoint FOB Pin p oint FOB end views p

Pinpoint FOB

Pinpoint FOB inside Pinpoint FOB no shield

This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Non-Specific EMC Report Shell Rev. July 2013 Page 1 of 45 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT EMC TEST REPORT Report Number: 101468944BOX-002 Project Number: G101468944 Report Issue Date: 01/20/2014 Product Designation: REMOTE-GPS, WRLS, PINPOINT Standards: FCC Part 15:2013 Subpart C Section 15.249, FCC Part 15:2013 Subpart B Class B, RSS-210 Issue 8 December 2010, ICES-003 Issue 5 August 2012 RSS-Gen Issue 3 December 2010 IC RSS-102 Issue 4 March 2010 Tested by: Client: Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719 USA Attwood Corporation 1016 N Monroe St LOWELL, MI 49331 USA Report prepared by Reviewer Report reviewed by Vathana Ven / Senior Project Engineer Nicholas Abbondante / Chief Engineer, EMC Intertek Report Number: 101468944BOX-002 Issued: 01/20/2014 Non-Specific EMC Report Shell Rev. July 2013 Page 2 of 45 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT 1 Introduction and Conclusion The tests indicated in section 2.0 were performed on the product constructed as described in section 4.0. The remaining test sections are the verbatim text from the actual data sheets used during the investigation. These test sections include the test name, the specified test Method, a list of the actual Test Equipment Used, documentation Photos, Results and raw Data. No additions, deviations, or exclusions have been made from the standard(s) unless specifically noted. Based on the results of our investigation, we have concluded the product tested complies with the requirements of the standard(s) indicated. The results obtained in this test report pertain only to the item(s) tested. 2 Test Summary Section Test full name Result 3 Client Information 4 Description of Equipment Under Test 5 System Setup and Method 6 Fundamental Field Strength, Human RF Exposure and Duty Cycle (FCC Part 15:2013 Subpart C Section 15.249, 15.249(a), FCC Part 2.1091(c), RSS-210 Issue 8 December 2010, A2.9(a), IC RSS-102 Issue 4 March 2010) Pass 7 Harmonics Field Strength ( FCC Part 15:2013 Subpart C Section 15.249, 15.249(a), RSS-210 Issue 8 December 2010, A2.9(a)) Pass 8 Spurious Field Strength ( FCC Part 15:2013 Subpart C Section 15.249, 15.249(d), FCC Part 15:2013 Subpart B, RSS-210 Issue 8 December 2010, A2.9(b), ICES-003 Issue 5 August 2012, RSS-Gen Issue 3 December 2010) Pass 9 20 dB Bandwidth and Occupied bandwidth (FCC Part 15.215(c), RSS-Gen Issue 3 December 2010 4.6.3) Pass 10 Revision History Note: The device is a transmitter only and it is powered by two 1.5V battery. Intertek Report Number: 101468944BOX-002 Issued: 01/20/2014 Non-Specific EMC Report Shell Rev. July 2013 Page 3 of 45 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT 3 Client Information This EUT was tested at the request of: Client: Attwood Corporation 1016 N Monroe St LOWELL, MI 49331 USA Contact: Rich Mullennix Telephone: (616) 897-2332 Fax: (616) 897-2256 Email: [email protected] 4 Description of Equipment Under Test Manufacturer: Attwood Corporation 1016 N Monroe St LOWELL, MI 49331 USA Equipment Under Test Description Manufacturer Model Number Serial Number MotorGuide Pinpoint Attwood Corporation 001010148 BOX1312161413-002 (INTERTEK ASSIGNED) MotorGuide Pinpoint Attwood Corporation 001010148 BOX1312161413-003 (INTERTEK ASSIGNED) Receive Date: 12/16/2013 Received Condition: Good Type: Production Description of Equipment Under Test (provided by client) The device is a MotorGuide Pinpoint operates at 2424.5, 2449.5, and 2480 MHz with integral antenna. Equipment Under Test Power Configuration Rated Voltage Rated Current Rated Frequency Number of Phases (2) 1.5VDC N/A N/A N/A Operating modes of the EUT: No. Descriptions of EUT Exercising 1 Transmit mode 2 Software used by the EUT: No. Descriptions of EUT Exercising 1 Firmware Intertek Report Number: 101468944BOX-002 Issued: 01/20/2014 Non-Specific EMC Report Shell Rev. July 2013 Page 4 of 45 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT 5 System Setup and Method Cables ID Description Length (m) Shielding Ferrites Termination N/A Support Equipment Description Manufacturer Model Number Serial Number N/A 5.1 Method: Configuration as required by FCC Part 15:2013 Subpart C Section 15.249, FCC Part 15:2013 Subpart B Class B, RSS-210 Issue 8 December 2010, ICES-003 Issue 5 August 2012, RSS-Gen Issue 3 December 2010, ICES-003 Issue 5 August 2012, ANSI C63.10:2013, IC RSS-102 Issue 4 March 2010. . 5.2 EUT Block Diagram: Intertek Report Number: 101468944BOX-002 Issued: 01/20/2014 Non-Specific EMC Report Shell Rev. July 2013 Page 5 of 45 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT 6 Fundamental Field Strength, Human RF Exposure and Duty Cycle 6.1 Method Tests are performed in accordance with FCC Part 15:2013 Subpart C Section 15.249, 15.249(a), RSS-210 Issue 8 December 2010, A2.9(a), IC RSS-102 Issue 4 March 2010, ANSI C63.4. TEST SITE: 10m ALSE The 10m ALSE is 13m (Length) x 21m (Depth) x 10m (Height) with the effective size in terms of space from the tips of the absorber is 12m (Length) x 20m (Depth) x 8.5m (Height). This chamber achieves broadband…

Text truncated - open the document above for the full version.

Intertek Report Number: 101468944BOX-002 Issued: 12/22/2013 Non-Specific EMC Report Shell Rev. July 2013 Page 8 of 52 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT 6.4 Setup Photographs: X-Axis Intertek Report Number: 101468944BOX-002 Issued: 12/22/2013 Non-Specific EMC Report Shell Rev. July 2013 Page 9 of 52 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT Y-Axis Intertek Report Number: 101468944BOX-002 Issued: 12/22/2013 Non-Specific EMC Report Shell Rev. July 2013 Page 10 of 52 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT Z-Axis Intertek Report Number: 101468944BOX-002 Issued: 12/22/2013 Non-Specific EMC Report Shell Rev. July 2013 Page 11 of 52 Attwood Corporation, REMOTE-GPS, WRLS, PINPOINT