N5GCFCInductive Tag Reader

Compact Flash-Card User Manual Transponder Reader 2 Transponder Reader – CF-Card, Release 1.1 ID040052 Rev 11-2004 Printed in Germany Subject to modifications © 2004 BROOKS Automation (Germany) GmbH RFID Division Gartenstrasse 19 D-95490 Mistelgau Germany Tel: +49 9279 991 910 Fax: +49 9279 991 900 E-mail: [email protected] 3 Transponder Reader – CF-Card, Release 1.1 TABLE OF CONTENTS 1 INTRODUCTION 5 1.1 About this Device ..................................................................5 1.2 About this Manual .................................................................6 2 SAFETY INSTRUCTIONS 7 2.1 Symbols and Types Used in this Manual ................................8 2.2 General Safety Instructions ....................................................9 2.3 Proper Use.............................................................................9 2.4 Declaration of Conformity ...................................................10 2.4.1 USA – Federal Communications Commission (FCC) .....10 2.4.2 Europe – CE Conformity ...............................................11 3 PRODUCT DESCRIPTION 14 3.1 Hardware .............................................................................14 3.2 Labeling Information ...........................................................14 3.3 Technical Data.....................................................................14 3.3.1 Transponder Reader ......................................................14 3.3.2 Power Supply and Current Input ....................................15 3.3.3 System Requirements ....................................................15 3.3.4 Serial Interface ..............................................................15 3.4 Contents of Delivery ............................................................16 3.5 Warranty and Liability .........................................................16 4 INSTALLATION 17 4.1 Installation Environment ......................................................17 4.2 Dimensions..........................................................................18 4.3 Installation to a Notebook or PDA .......................................19 4.3.1 Notebook or Desktop PC ...............................................19 4.3.2 PDA ..............................................................................19 4.4 Reading and Writing Ranges ................................................22 5 OPERATION 23 5.1 Protocol ...............................................................................23 5.1.1 Message Structure .........................................................23 5.1.2 Commands ....................................................................24 5.1.3 Error Messages..............................................................26 5.1.4 Acknowledge Codes ......................................................26 5.2 Additional Instruction for Use..............................................26 6 SERVICE AND ERROR HANDLING 27 6.1 General................................................................................27 6.2 Reader can not be found by the PDA....................................27 6.3 Reader can not be found by the PC/Notebook.......................27 4 Transponder Reader – CF-Card, Release 1.1 6.4 Customer Service.................................................................28 7 TRANSPORTATION, DISPOSAL AND STORAGE 29 7.1 Transportation .....................................................................29 7.2 Disposal...............................................................................29 7.3 Storage ................................................................................29 INTRODUCTION 1 5 Transponder Reader – CF-Card, Release 1.1 1 INTRODUCTION 1.1 About this Device The BROOKS Transponder Reader System is a high-frequency identification system that uses FM transmission. The basic item is a transponder that works as a forgery-proof electronic identity disk. The reading unit of the system sends an energy impulse via the antenna. The capacitor of the passive, battery-free transponder is charged by this impulse. After that, the transponder returns a signal with the stored data. The total reading cycle takes less than 100 ms. As a sight connection between the transponder and the reader is not absolutely necessary, the transponder can also be identified through non-metallic material. The BROOKS CF-Card Transponder Reader is a device to read and write to TIRIS transponder. The card can be used in connection with a notebook or a PDA. 1 INTRODUCTION 6 Transponder Reader – CF-Card, Release 1.1 1.2 About this Manual This manual contains information about installing, operating and error handling the BROOKS CF-Card Transponder Reader. It consists of seven chapters: ƒ Introduction ƒ Safety Instructions ƒ Product Description ƒ Installation ƒ Operation ƒ Service and Error Handling ƒ Transportation, Disposal and Storage SAFETY INSTRUCTIONS 2 7 Transponder Reader – CF-Card, Release 1.1 2 SAFETY INSTRUCTIONS This product is manufactured in accordance with state of the art technology and corresponds to recognized safety regulations. Nevertheless, there are dangers associated with the use of the equipment even for its intended purpose. You should therefore read the following safety information carefully and keep it in mind. Only install and operate this equipment if it is in perfect condition and with reference to this manual. Do not use the equipment if it is damaged. 2 SAFETY INSTRUCTIONS 8 Transponder Reader – CF-Card, Release 1.1 2.1 Symbols and Types Used in this Manual This symbol alerts you to dangerous voltage This symbol alerts you to important instructions This symbol indicates electromagnetic radiation This symbol alerts you to risk of explosion This symbol alerts you to risk of fire ) This symbol indicates important additional information Electrostatically sensitive components 13:44:33 Incoming: ENQ (05) This type represents transmitted data display SAFETY INSTR…

Text truncated - open the document above for the full version.

Request for Confidentiality 12 January 2005 PHOENIX TEST-LAB GmbH Königswinkel 10 D32825 Blomberg Germany RE: Certification Application FCC ID: N5GCFC Please be advised that the following information is to be held confidential on behalf of Brooks Automation (Germany) GmbH: • Schematics • Parts Lists • Block Diagram • Technical Description The application contains technical information which Brooks Automation (Germany) GmbH deems to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter.

FCC ID N5GCFV FCC ID N5GCFV FCC ID N5GCFV

FCC ID N5GCFV FCC ID N5GCFV FCC ID N5GCFV FCC ID N5GCFV

FCC ID N5GCFV FCC ID N5GCFV FCC ID N5GCFV

Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Test Report No. 50381-40566-1 (Edition 1) Page 1 of 45 Pages Straubing, October 22, 2004 T E S T - R E P O R T No. 50381-40566-1 (Edition 1) for CFC-Transponder Reader Inductive Tag Reader Applicant: Brooks Automation (Germany) GmbH Test Specifications: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207 and 15.209 Industry Canada Radio Standards Specification RSS-210 Issue 5, Sections 6.2.1, 6.3 and 6.6 (Category I Equipment) Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 2 of 45 Pages Table of Contents 1 Description of the Equipment Under Test (EUT) ........................................................ 3 2 Administrative Data..................................................................................................... 4 3 Identification of the Test Laboratory ........................................................................... 5 4 Summary .................................................................................................................... 6 5 Operation Mode and Configuration of EUT................................................................. 7 6 Measuring Methods .................................................................................................... 8 6.1 Conducted AC powerline emission....................................................................... 8 6.2 Radiated Emission Measurement 9 kHz – 30 MHz .............................................. 9 6.3 Radiated emission in Fully Anechoic Room ....................................................... 11 6.4 Radiated emission at Open Field Test Site ........................................................ 13 7 Photographs Taken During Testing .......................................................................... 14 8 List of Measurements ............................................................................................... 23 9 Referenced Regulations ........................................................................................... 30 10 Charts taken during testing ....................................................................................... 31 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 3 of 45 Pages 1 Description of the Equipment Under Test (EUT) General data of EUT Type designation 1 : CFC-Transponder Reader Parts 2 : --- Serial number(s): 00-0001-CFC Manufacturer: Brooks Automation (Germany) GmbH Type of equipment: Inductive Tag Reader Version: As delivered FCC ID: N5GCFC Additional parts/accessories: - CF to PC card adapter Pretec CompactAdapter - Tag Texas Instruments RI-TRP-R4FF Technical data of EUT Application frequency range: Not applicable 3 Frequency range: 134.2 kHz Operating frequency: 134.2 kHz Type of modulation: FSK Pulse train: 752 ms Pulse width: 57.4 ms Number of RF-channels: 1 Channel spacing: Not applicable Class of emission: 12K0F1D Type of antenna: Loop antenna on printed board Size/length of antenna: Dimensions of loop: length ca. 14 mm, width ca. 38 mm Number of loops: 30 Type of power supply: DC supply (by PC card port of host computer) Specifications for power supply: nominal voltage: 5.00 V minimum voltage: 4.75 V maximum voltage: 5.25 V nominal frequency: --- Hz 1 Type designation of the system if EUT consists of more than one part. 2 Type designations of the parts of the system, if applicable. 3 General requirements according to CFR 47 Part 15 section 15.209 apply. Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 4 of 45 Pages 2 Administrative Data Application details Applicant (full address): Brooks Automation (Germany) GmbH Gartenstrasse 19 D-95490 Mistelgau Germany Contact person: Mr. Lothar Düngfelder Contract identification: --- Receipt of EUT: August 9, 2004 Date(s) of test: August 27, 30 and 31, 2004 October 1, 2004 Note(s): --- Report details Report number: 50381-40566-1 Edition: 1 Issue date: October 22, 2004 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 5 of 45 Pages 3 Identification of the Test Laboratory Details of the Test Laboratory Company name: Senton GmbH EMI/EMC Test Center Address: Aeussere Fruehlingstrasse 45 D-94315 Straubing Germany Laboratory Accreditation: DAR-Registration No. DAT-P-171/94-02 FCC Test Site registration number 90926 Industry Canada Test site registration: IC 3050 Contact person: Mr. Johann Roidt Phone: (+49) (0)9421 5522-0 Fax: (+49) (0)9421 5522-99 Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 6 of 45 Pages 4 Summary Summary of test results The tested sample complies with the requirements set forth in the Code of Federal Regulations CFR 47, Part 15, Sections 15.205, 15.207 and 15.209 of the Federal Communication Commission (FCC) and the Radio Standards Specification RSS-210 Issue 5, Sections 6.2.1, 6.3 and 6.6 (Category I Equipment) of Industry Canada (IC). Personnel involved in this report Laboratory Manager: Mr. Johann Roidt Responsible for testing: Mr. Rainer Heller Responsible for test report: Mr. Rainer Heller Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 7 of 45 Pages 5 Operation Mode and Configuration of EUT Operation Mode EUT is mounted in PC card slot of a notebook and supplied via PC card bus. By activating the polling mode in "Hermos PC-Card Test Software" EUT is transmitting continuously. Tests are performed with reading tag continuously as well as without tag ("waiting for tag"). Configuration of EUT EUT is configured in a PC card sl…

Text truncated - open the document above for the full version.

Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 15 of 45 Pages Test setup for conducted AC powerline emission test Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 16 of 45 Pages Test setup for conducted AC powerline emission test - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 17 of 45 Pages Test setup for conducted AC powerline emission test - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 18 of 45 Pages Test setup for radiated emission test (fully anechoic room) Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 19 of 45 Pages Test setup for radiated emission test (fully anechoic room) - additional position for measuring maximum magnetic field strength- Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 20 of 45 Pages Test setup for radiated emission test (open field test site) Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 21 of 45 Pages Test setup for radiated emission test (open field test site) - continued - Senton GmbH Aeussere Fruehlingstrasse 45 D-94315 Straubing Test Report No. 50381-40566-1 (Edition 1) Page 22 of 45 Pages Test setup for radiated emission test (open field test site) - additional position for measuring maximum magnetic field strength-