N5GLF60CRFID Reader

English Product Manual RFID Reader LF60C SoliD The operating manual must be read prior to the initial start-up. Observe the safety instructions! Store for future use! This documentation is not subject to revisions. ID130030 03/2013 This product manual corresponds with "Directive 1999/5/EC of the European Parliament and the Council on radio equipment and telecommunications transmission equipment and the mutual recognition of the conformity". This product manual is addressed to the operating company who must pass it on to the personnel responsible for installation, connection, use and repairs of the machine. The plant manager must ensure that the information contained in this product manual and in the accompanying documents has been read and understood. The product manual must be stored in a place that is familiar and easily accessible to employees and must be consulted whenever an employee is unsure of how to proceed. The manufacturer does not assume any responsibility for injuries to persons or animals, or damage to property or to the device arising from incorrect use or disregard or insufficient consideration of the safety criteria contained in this product manual or based on modifications of the device or the use of unsuitable spare parts. The copyright for this product manual is held solely by Brooks Automation (Germany) GmbH RFID Division Gartenstr. 19 95490 Mistelgau Deutschland or its legal successor. Reproducing or circulating this product manual is only permitted with the exclusive approval of the copyright holder. This also applies if only excerpts of the product manual are copied or circulated. These requirements also apply for circulating the product manual in digital form. Status: March 2013 Information Information Archiving Store the product manual in the vicinity of the device! Always keep the product manual handy! Symbols and signal words The following symbols and signal words are used in this documentation. The combination of a pictograph and a signal word classifies the respective safety information. The symbol can vary depending on the type of danger. SymbolSignal wordDescription Death DANGERThis signal word must be used if death or irreversible damage to health can occur if the hazard information is not followed. Risk of injury and property damage WARNINGThis signal word indicates bodily injuries and property damage including injuries, accidents, and health risks. CAUTIONThis signal word indicates a risk of property damage. In addition, there is a slight risk of injuries. No damage ATTENTIONThis signal word warns of malfunctions and may only be used if no damage to health can occur. IMPORTANTThis signal word indicates cross- references and ways in which operations are facilitated. It excludes all risks of property damage and injury risks. Information Target group The operating instructions are addressed to personnel with the following areas of responsibility: Definition according to DIN EN 60204-1: Instructed personnel: Persons who have been instructed and, if required, trained by a specialist as to the tasks assigned to them, the possible risks of incorrect behavior and the required safety equipment and safety measures. Specialized personnel: Persons who can evaluate the work assigned to them and recognize possible risks based on their specialized training, knowledge, experience and familiarity with the relevant standards. Area of responsibilityCompetence Installation, transport and storageSpecialized personnel Commissioning, operation and decommissioning Instructed personnel TroubleshootingSpecialized personnel Contents 1Identification . . . . . . . . . . . . . . . . . . . . . . . . . 8 1.1Designated use 8 1.2Incorrect use 9 2Declaration of Conformity . . . . . . . . . . . . . . . 10 2.1USA - Federal Communications Commission (FCC) 10 2.2Europe - CE conformity 12 3General Instructions . . . . . . . . . . . . . . . . . . . 14 3.1Liability and warranty 14 3.2Objectives of the operating instructions 14 4Safety Instructions . . . . . . . . . . . . . . . . . . . . 16 4.1Area of application and symbols 16 4.1.1 Safety symbols - in compliance with DIN 4844-2 16 4.1.2 Warning symbols 17 4.1.3 Prohibition symbols 17 4.1.4 Other symbols 17 4.2Obligations 18 4.2.1 Operating company's obligations 18 4.2.2 Operating personnel's obligations 18 4.3ESD instructions 19 4.4Residual risks 19 4.5Additional instructions 20 5Product Specifications . . . . . . . . . . . . . . . . . . 22 5.1Function 22 5.2Images 23 5.2.1 Front view 23 5.2.2 Rear view 24 5.3Technical data 25 5.3.1 Device label 26 5.3.2 Power supply and current input 26 6Installation . . . . . . . . . . . . . . . . . . . . . . . . . . 27 6.1Safety instructions 27 6.2Qualified installation personnel 29 6.3Unpacking 29 Contents 6.4Assembly of the device 30 6.5Antenna installation 31 6.5.1 Positioning the antenna 31 6.5.2 Available antenna types 32 6.5.3 Dimensions for planning 32 6.6Connecting the transponder reader 33 6.7Power/RS485 bus connection 34 6.8RS232 connection 35 6.9Commissioning 35 6.9.1 Required operating conditions 35 6.9.2 Parameters of the serial interface 35 6.10 Ethernet connection 36 6.11 Input and output 37 6.12 DIP switches 38 7Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 7.1Operating personnel 39 7.2Protocol change 39 7.2.1 General remarks 39 7.2.2 Automatic protocol recognition (default) 40 7.2.3 Protocol switchover using DIP switches 40 7.2.4 Protocol setting using DIP switches 40 7.3Operation of the ASC-I1 protocol 41 7.3.1 Structure of the communication protocol 41 7.3.2 Package contents 41 7.3.3 Commands of protocol 43 7.3.4 Parameters 60 7.3.5 Message examples 62 7.4Operation of SECS/HSMS Protocol 64 7.4.1 Introduction 64 7.4.2 SECS-I implementation 65 7.4.3 HSMS option 69 7.4.4 HSMS implementation 69 7.4.5 SECS-II implementation 76 7.4.6 Parameters 96 7.4.7 SEMI E99 107 7.4.8 Message details 111 Contents 7.4.9 HSMS message examples 124 7.4.10 SECS-I message examples 124 8Serv…

Text truncated - open the document above for the full version.

Brooks Automation (Germany) GmbH, Ernst-Ruska-Ring 11, 07745 Jena, Sitz d. Ges.: Jena, Handelsregister: HRB 208928 (AG Jena) Geschäftsführer: Harald K. Buchmann, Marc C. Diesing, Jason W. Joseph, Martin S. Headley, Stephen S. Schwartz, Reinhard Enders VAT ID: DE217099329 – GB926947675, TPA: 161/125/03106 BROOKS Automation (Germany) GmbH RFID Division Gartenstraße 19 D-95490 Mistelgau Tel.: +49 (9279) 991-550 Fax: +49 (9279) 991-501 [email protected] www.brooks-rfid.com BROOKS Automation (Germany) GmbH – RFID Division TÜV SÜD Product Service GmbH PS-EMC-STR Äussere Frühlingsstrasse 45 D-94315 Straubing FCC ID: N5GLF60C To Whom It May Concern: We hereby confirm the following: - The LF60C RFID Reader has been tested according to the FCC Rules with the Mini- Antenna (Part number: ANT-7Kxx) as the unit will be shipped to the US with this antenna only. - The other antennas described in the manual are exclusively intended for the European market. July 04, 2013 Printed Name: Gerald Dittrich Position: R&D Manager

TÜV SÜD Product Service GmbH • Äußere Frühlingstr. 45 • 94315 Straubing • Deutschland Trade Register Munich HRB 85742 HypoVereinsbank Munich Acc. No. 48 852 211 Bank Code 700 202 70 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Supervisory Board: Dirk Eilers (Chairman) Management: Joachim Birnthaler (CEO) Dr. Jens Butenandt (Managing Director) Tel: 09421-5522-0 Fax: 09421-5522-99 www.tuev-sued.de TÜV SÜD Product Service GmbH Straubing Branch Äußere Frühlingstraße 45 94315 Straubing Germany PHOENIX TESTLAB GmbH Product Certification Königswinkel 10 D-32825 Blomberg Long/Short term Confidentiality Request 2013-04-25 FCC ID: N5GLF60C To whom it may concern, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby request long- term confidential treatment of information accompanying this application as outlined below: Schematics Parts List Block Diagram Tune-Up Info Operational Description In addition we hereby request the following exhibits contained in this application to be tempo- rarily (short-term confidentilality) withheld from the public disclosure for an initial period of days until: not applicable External Photos Test Setup Photos Internal Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and pro- vide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this applica- tion. Thank you for your attention in this matter. TÜV SÜD Product Service GmbH Johann Roidt Laboratory Manager

FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C

FCC ID N5GLF60C FCC ID N5GLF60C FCC ID N5GLF60C

Note: The test data of this report is related only to the individual item which has been tested. This report shall not be reproduced except in full extent without the written approval of the testing laboratory. Trade Register Munich HRB 85742 VAT ID No. DE129484267 Information pursuant to Section 2(1) DL-InfoV (Germany) at www.tuev-sued.com/imprint Supervisory Board: Dirk Eilers Management: Robert Kees Dr. Jens Butenandt Phone: +49 9421 55 22-0 Fax: +49 9421 55 22-99 www.tuev-sued.de TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Prüfbericht / Test Report Nr. / No. 69557-18434-3 (Edition 3) Applicant: Brooks Automation (Germany) GmbH RFID Division Type of equipment: RFID TIRIS Reader Type designation: LF60 Solid Order No.: Order of 30.01.13 Test standards: FCC Code of Federal Regulations, CFR 47, Part 15, Sections 15.205, 15.207 and 15.209 July 8, 2013 Page 1 of 44 TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 3) Page 2 of 44 Pages Table of Contents 1 Description of the Equipment Under Test (EUT) ............................................................ 3 2 Administrative Data ........................................................................................................ 5 3 Identification of the Test Laboratory ............................................................................... 6 4 Summary ........................................................................................................................ 7 5 Operation Mode and Configuration of EUT .................................................................... 8 6 Measurement Procedures .............................................................................................. 9 6.1 Conducted Output Power ......................................................................................... 9 6.2 Bandwidth Measurements ...................................................................................... 11 6.3 Conducted AC Powerline Emission ....................................................................... 12 6.4 Radiated Emission Measurement 9 kHz to 30 MHz ............................................... 14 6.5 Radiated Emission at Alternative Test Site ............................................................ 16 7 Photographs Taken During Testing .............................................................................. 18 8 Test Results ................................................................................................................. 24 8.1 Conducted Output Power ....................................................................................... 25 8.2 Occupied Bandwidth .............................................................................................. 27 8.3 Bandwidth of the Emission ..................................................................................... 29 8.4 Designation of Emissions ....................................................................................... 31 8.5 Restricted Bands of Operation ............................................................................... 32 8.6 Conducted Powerline Emission Measurement 150 kHz to 30 MHz ...................... 33 8.7 Radiated Emission Measurement 9 kHz to 30 MHz .............................................. 35 8.8 Radiated Emission Measurement 30 MHz to 1 GHz ............................................. 36 9 Referenced Regulations ............................................................................................... 37 10 Test Equipment List with Calibration Data .................................................................... 39 11 Revision History ............................................................................................................. 1 Annex A Charts taken during testing ................................................................................ 2 A.1 Plots taked during testing ......................................................................................... 2 TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 3) Page 3 of 44 Pages 1 Description of the Equipment Under Test (EUT) General data of EUT Type designation 1 : LF60 Solid Parts 2 : Reader LF60 Mini Antenna ANT-7K15 Serial number(s): 4812 0004 Manufacturer: Brooks Automation GmbH Type of equipment: RFID TIRIS Reader Version: With modifications according to documentation of applicant FCC ID: N5GLF60C Additional parts/accessories: 1 Type designation of the system if EUT consists of more than one part. 2 Type designations of the parts of the system, if applicable. TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 3) Page 4 of 44 Pages Technical data of EUT Application frequency range: 134.2 kHz Frequency range: 134.2 kHz Operating frequency: 134.2 kHz Type of modulation: AM / FM Pulse train: --- Pulse width: --- Number of RF-channels: 1 Channel spacing: --- Designation of emissions 3 : 1K80A1D Type of antenna: Dedicated antenna Size/length of antenna: Ø 1 x 7 cm Connection of antenna: detachable not detachable Type of power supply: DC supply Specifications for power supply: nominal voltage: 24 V minimum voltage: 18 V maximum voltage: 30 V Specifications for AC power supply: nominal voltage: 110 V nominal frequency: 60 Hz 3 Also known as "Class of Emission". TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 3) Page 5 of 44 Pages 2 Administrative Data Application details Applicant (full address): Brooks Automat…

Text truncated - open the document above for the full version.

TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 1) Page 19 of 45 Pages Test setup for conducted DC powerline emission measurement TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 1) Page 20 of 45 Pages Test setup for conducted DC powerline emission measurement - continued - TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 1) Page 21 of 45 Pages Test setup for radiated emission measurement 9 kHz – 30 MHz TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 1) Page 22 of 45 Pages Test setup for radiated emission measurement (alternate test site) TÜV SÜD Product Service GmbH Äußere Frühlingstraße 45 94315 Straubing Germany Phone: +49 9421 5522-0 Fax: +49 9421 5522-99 Web: www.tuev-sued.de Test Report No. 69557-18434-3 (Edition 1) Page 23 of 45 Pages Test setup for radiated emission measurement (alternate test site) - continued -