N7NAC860Multi-Mode & Multi-Band Wireless Network Card

2130623 Rev 3.1A AirCard ® 800 Series Wireless Network Cards arInstallation Guide Preface Rev 3.1A Sep.051 Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless or its affiliates. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. NOTWITHSTANDING THE FOREGOING, IN NO EVENT SHALL SIERRA WIRELESS AND/OR ITS AFFILIATES’ AGGREGATE LIABILITY ARISING UNDER OR IN CONNECTION WITH THE SIERRA WIRELESS PRODUCT, REGARDLESS OF THE NUMBER OF EVENTS, OCCURRENCES OR CLAIMS GIVING RISE TO LIABILITY, BE IN EXCESS OF THE PRICE PAID BY THE PURCHASER FOR THE SIERRA WIRELESS PRODUCT. PatentsPortions of this product may be covered by some or all of the following US patents: 5,515,0135,629,9605,682,6025,845,2165,847,553 5,878,2345,890,0575,929,8156,169,8846,191,741 6,199,1686,339,4056,359,5916,400,3366,643,501 6,516,2046,561,8516,653,9796,697,0306,785,830 6,845,2496,847,8306,876,6976,879,585D442,170 D459,303 and other patents pending. This product includes technology licensed from: Licensed by QUALCOMM Incorporated under one or more of the following United States patents and/or their counterparts in other nations: 4,901,3075,056,1095,101,5015,109,3905,228,054 5,267,2615,267,2625,337,3385,414,7965,416,797 5,490,1655,504,7735,506,8655,511,0735,535,239 5,544,1965,568,4835,600,7545,657,4205,659,569 5,710,7845,778,338 Manufactured or sold by Sierra Wireless or its licensees under one or more patents licensed from InterDigital Group. Copyright©2005 Sierra Wireless. All rights reserved. AirCard 800 Series Installation Guide 22130623 TrademarksAirCard ® and Heart of the Wireless Machine ® are registered trademarks of Sierra Wireless. Sierra Wireless, the Sierra Wireless logo, the red wave design, the red-tipped antenna, and Watcher are trademarks of Sierra Wireless. Other trademarks are the property of the respective owners. All product specifications are subject to change without notice. Rev 3.1A Sep.053 Table of Contents Introducing the AirCard 800 Series Wireless Network Cards . . .5 AirCard 800 Series wireless network cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Supported operating systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The AirCard as a network card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HSDPA, UMTS, EDGE, and GPRS service support . . . . . . . . . . . . . . . . . . . 6 Frequency band support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Your account and coverage area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 AirCard software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Before you can begin using the AirCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 The SIM Card and Your Account . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Inserting a SIM card into your AirCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Removing a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Attaching the antenna to your AirCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Software and Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 System requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Installation on Windows 98, 2000, Me, and XP . . . . . . . . . . . . . . . . . . . . . . . . . 13 Setting Internet Explorer to use the AirCard. . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Configuring Your Account . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Setting up a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Care and Maintenance of Your Network Card . . . . . . . . . . . . . . . .21 Stopping and ejecting the AirCard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 AirCard 800 Series Installation Guide 42130623 Watcher™ Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 Launching Watcher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 The Watcher window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Icons and indicators on the main Watcher window . . . . . . . . . . . . . . . . . . . . 24 View options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Status icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Power Down and Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Frequency band and network selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Frequency band selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Network selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 LED operation . . . . . . . . . . . . . . . . . . . . . . . . . . …

Text truncated - open the document above for the full version.

Mike Kuo From: Claire Hoque Sent: Friday, September 30, 2005 4:43 PM To: Mike Kuo; Chris Harvey; Sunny Shih Cc: Christine Vu; William Lau; Chris Harvey -TCB Subject: answer------- Sierra Wireless Inc., FCC ID: N7NAC860, Assessment NO.: AN05T5160, Notice#1 Importance: High Attachments: AC860 FCC parts 22 24 conducted report(revised).pdf; Attachment to AC860 Operation_Description (confidential).doc; Confidentiality Request Letter(including short-term).pdf; FCC ID LABEL(revised).pdf; Sierra Wireless A860 FCC MPE(revised).pdf; 05U3648-1 FCC 22 & 24 Test Report(without setup photos).pdf  10/4/2005 Hi Mike and Chris, 1. The photographs show what appears to be a battery covering a large portion of the card near the connector. Please re- photograph the card for the internal photo exhibit showing the components under the ‘battery’, paying attention to the focus (original photographs are not clear). [ client ] There is no battery on the board. The part, which was mistakenly identified as "battery", is actually a capacitor, and there is no component below it. 2. The Form 731 indicated the frequency range for the GMSK and EDGE operations for PCS1900 band is 1850.2 - 1909.8 MHz, however the test data submitted only documents the frequency range of 1850.4 - 1909.6 MHz. Please clarify and provide additional band edge data as needed. [client] The frequency range 1850.2 - 1909.8 MHz is correct. Measurement has been redone and test report revised. See attached conducted report(revised) 3. The test procedures used are not clearly defined in the test report. An example of this is the Conducted RF Power Output measurements of test report section 4 which does not clearly indicate which instrument is being used for power, nor the bandwidth capability, especially for the >4MHz bandwidth signal of WCDMA. Additionally the RBW is indicated as being set at 300kHz, which would be too low for measuring the power of the GMSK, 8-QPSK and WCDMA modulated signals. Please clarify this report by providing more detailed test procedures either in the test report of separately (please include the detailed procedures in the test report in the future. [ client ] The test report has been revised (attached). 4. The spurious emissions measurement of the signals was performed with a resolution bandwidth of 30kHz, which is less than 1% of the emission bandwidth. In accordance with 22.917 and 24.238, please describe how this measurement complies with the requirement (copied here for your reference) or alternatively provide additional compliance data: In the 1 MHz bands immediately outside and adjacent to the frequency block a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. A narrower resolution bandwidth is permitted in all cases to improve measurement accuracy provided the measured power is integrated over the full required measurement bandwidth (i.e. 100 kHz (for 22.917 or 1MHz for 24.238) or 1 percent of emission bandwidth, as specified). The emission bandwidth is defined as the width of the signal between two points, one below the carrier center frequency and one above the carrier center frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. [ client ] The test report has been revised(attached). 5. Please provide the detailed antenna specifications for this portable device. [ client ] The antenna is a detachable hinged whip antenna and is internally matched to 50 Ohms. 6. Your MPE exhibit indicates that the PCS device operates below 3W (routine evaluation is not required) and therefore an MPE calculation is not provided. The MPE calculation must still be submitted for the maximum power and maximum antenna gain, but there is no need to measure the MPE. Please correct the MPE estimate for mobile uses of this module. [ answer ] pls see revised MPE as attached. 7. Please provide an exhibit which specifies the DC Voltages and Currents in accordance with FCC 2.1033(c). [ client ] Pls see the attached document. "Attachment to AC860 Operation Description" 8. WCDMA related questions: please refer to the separate attachments. Additional SAR measurement were performed with air-link to base station simulator. In 850 WCDMA mode, only the highest SAR value with specific notebook duirng the test mode was tested; 1900 WCDMA mode, SAR tests were performed on all three notebook computer. Thanks, Claire The items indicated above must be submitted before processing can continue on the above referenced application. Failure to provide the requested information within 30 days of the original e-mail date may result in application dismissal and forfeiture of the filing fee. Also, please note that partial responses increase processing time and should not be submitted. Any questions about the content of this correspondence should be directed to the e-mail address listed below the name of the sender.  10/4/2005

May 4, 2006 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Subject:Confidential Exhibit Ref:Applicant: Sierra Wireless, Inc. FCC ID: N7NAC860 TCB confirmation no: TC787906 Grant date: 10/03/2005 To Whom It May Concern: On May 03, 2006, we found one of exhibits ( Reply to TCB Question #8 ) contains confidential information which should not be available for public disclosure. We understand that between Oct. 03, 2005 to May 04, 2006, this exhibit has been available on FCC public access web site. We are requesting Compliance Certification Services who is the TCB issued the grant to block above exhibit on May 04, 2006. Sincerely, Ying Wang Senior RF Engineer

REPORT NO: 05U3648-6 DATE: September 9, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 5 of 40 This report shall not be reproduced except in full, without the written approval of CCS. 1 EQUIPMENT UNDER TEST (EUT) DESCRIPTION 850/900/1800/1900 MHz Quadband PC Card installed in host devices. GPRS Class: Class 10 Note: This device contains 900/1800 MHz bands are not operational in US territories. This report is applicable to 850 and 1900 MHz bands. Host devices: Host # 1: Toshiba, Satellite Host # 2: NEC, VERSA SX Host # 3: Compaq, ARMADA E500 Power supply: Power supplied through the laptop computer (host device) Normal operation: Lap-held position Equipment Under Test (EUT) Model: AirCard 860 REPORT NO: 05U3648-6 DATE: September 9, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 33 of 40 This report shall not be reproduced except in full, without the written approval of CCS. 13 PHOTO 13.1 EUT

REPORT NO: 05U3648-6B DATE: September 30, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 4 of 19 This report shall not be reproduced except in full, without the written approval of CCS. 1 EQUIPMENT UNDER TEST (EUT) DESCRIPTION 850/900/1800/1900 MHz Quadband PC Card installed in host devices. GPRS Class: Class 10 Note: This device contains 900/1800 MHz bands are not operational in US territories. This report is applicable to 850 and 1900 MHz bands. Host devices: Host # 1: Toshiba, Satellite Host # 2: NEC, VERSA SX Host # 3: Compaq, ARMADA E500 Power supply: Power supplied through the laptop computer (host device) Normal operation: Lap-held position Equipment Under Test (EUT) Model: AirCard 860

PROPOSED FCC ID LABEL AND LOCATION SIERRA WIRELESS This device complies with Part 22/24 of the FCC Rules. FCC ID: N7NAC860 FCC ID LABEL LOCATION Bottom Side of EUT

MAXIMUM PERMISSIBLE EXPOSURE (AirCard 860) LIMITS §1.1310 The criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio-frequency (RF) radiation as specified in §1.1307(b), except in the case of portable devices which shall be evaluated according to the provisions of §2.1093 of this chapter. CALCULATIONS Given E = √ (30 * P * G) / d and S = E ^ 2 / 3770 where E = Field Strength in Volts/meter P = Power in Watts G = Numeric antenna gain d = Distance in meters S = Power Density in milliwatts/square centimeter Combining equations and rearranging the terms to express the distance as a function of the remaining variables yields: d = √ ((30 * P * G) / (3770 * S)) Changing to units of Power to mW and Distance to cm, using: P (mW) = P (W) / 1000 and d (cm) =100 * d (m) yields d = 100 * √ ((30 * (P / 1000) * G) / (3770 * S)) d = 0.282 * √ (P * G / S) where d = distance in cm P = Power in mW G = Numeric antenna gain S = Power Density in mW/cm^2 Substituting the logarithmic form of power and gain using: P (mW) = 10 ^ (P (dBm) / 10) and G (numeric) = 10 ^ (G (dBi) / 10) yields d = 0.282 * 10 ^ ((P + G) / 20) / √ S where d = MPE distance in cm P = Power in dBm G = Antenna Gain in dBi S = Power Density Limit in mW/cm^2 Rearranging terms to calculate the power density at a specific distance yields S = 0.0795 * 10 ^ ((P + G) / 10) / (d^2) LIMITS From §1.1310 Table 1 (B), the maximum value of S = 1.0 mW/cm^2 RESULTS No non-compliance noted: NOTE: For mobile or fixed location transmitters, the minimum separation distance is 20 cm, even if calculations indicate that the MPE distance would be less. ModeMPEOutputDutyAntennaPower DistancePowerCycleGainDensity (cm)(dBm)(%)(dBi)(mW/cm^2) 800MHz Celllar20.032.000.258.000.50 ModeMPEOutputAntennaPower DistancePowerGainDensity (cm)(dBm)(dBi)(mW/cm^2) 1900 MHz PCS20.029.004.000.24

IN ACCORDANCE WITH THE REQUIREMENTS OF FCC REPORT AND ORDER: ET DOCKET 93-62 AND OET BULLETIN 65 SUPPLEMENT C And RSS-102 Issue 1 (Provisional) September 25, 1999 FOR 850/900/1800/1900 MHz Quadband PC Card Model: AirCard 860 FCC ID: N7NAC860 REPORT NUMBER: 05U3648-6 ISSUE DATE: September 9, 2005 Prepared for Sierra Wireless, Inc. 13811 Wireless Way Richmond, British Columbia V6V 3A4 Canada Prepared by COMPLIANCE CERTIFICATION SERVICES 561F MONTEREY ROAD, MORGAN HILL, CA 95037 United States REPORT NO: 05U3648-6 DATE: September 9, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 2 of 40 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issued date Revisions Revised By A September 9, 2005 Initial Issue HS REPORT NO: 05U3648-6 DATE: September 9, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 3 of 40 This report shall not be reproduced except in full, without the written approval of CCS. CERTIFICATE OF COMPLIANCE (SAR EVALUATION) DATES OF TEST: September 6 - 9, 2005 APPLICANT: ADDRESS: Sierra Wireless, Inc. 13811 Wireless Way Richmond, British Columbia V6V 3A4, Canada FCC ID: MODEL: N7NAC860 AirCard 860 DEVICE CATEGORY: EXPOSURE CATEGORY: Portable Device General Population/Uncontrolled Exposure 850/900/1800/1900 MHz Quadband PC Card Note: This device contains 900/1800 MHz bands are not operational in US territories. This report is applicable to 850 and 1900 MHz bands. Test Sample is a: Identical prototype unit Host devices: Host # 1: Toshiba, Satellite Host # 2: NEC, VERSA SX Host # 3: Compaq, ARMADA E500 FCC Rule Parts Frequency Range [MHz] The Highest SAR Values (1g) 22H (GSM) 824.2 – 848.8 body: 0.412 mW/g 22H (WCDMA) 826.4 – 846.6 body: 0.219 mW/g 24E (GSM) 1850.2 – 1909.8 body: 0.499 mW/g 24E (WCDMA) 1852.4 – 1907.6 body: 0.470 mW/g This wireless portable device has been shown to be capable of compliance for localized specific absorption rate (SAR) for General Population/Uncontrolled Exposure limits specified in ANSI/IEEE Std. C95.1-1992 and had been tested in accordance with the measurement procedures specified in FCC OET 65 Supplement C (Edition 01-01). And RSS-102 Issue 1 (Provisional) September 25, 1999. The maximum 1g SAR level measured for all the tests performed did not exceed the limits for General Population/Uncontrolled Exposure (W/kg) Partial Body of 1.6 W/kg. Level defined in Supplement C (Edition 01-01) to OET Bulletin 65 (97-01). Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by Compliance Certification Services and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by Compliance Certification Services will constitute fraud and shall nullify the document. No part of this report may be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any government agency. Released For CCS By: Hsin Fu Shih SENIOR ENGINEER COMPLIANCE CERTIFICATION SERVICES REPORT NO: 05U3648-6 DATE: September 9, 2005 FCC ID: N7NAC860 COMPLIANCE CERTIFICATION SERVICES Page 4 of 40 This report shall not be reproduced except in full, without the written approval of CCS. Table of Contents 1 Equipment Under Test (EUT) Description........................................................................................... 5 2 FACILITIES AND ACCREDITATION .................................................................................................. 6 3 System Description ............................................................................................................................. 7 4 System Component............................................................................................................................. 8 4.1 DASY4 Measurement Server...................................................................................................... 8 4.2 Data Acquisition Electronics (DAE).............................................................................................8 4.3 EX3DV3 Isotropic E-Field Probe for Dosimetric Measurements................................................. 8 4.4 Light Beam Unit .......................................................................................................................... 9 4.5 SAM Phantom (V4.0) .................................................................................................................. 9 4.6 Device Holder for SAM Twin Phantom ..................................................................................... 10 4.7 System Validation Kits .............................................................................................................. 10 4.8 Composition of Ingredients for tissue simulating liquid ............................................................. 10 5 Test positions for devices Operating Next To A Person’s Ear .......................................................... 11 5.1 Cheek/Touch Position............................................................................................................... 12 5.2 Ear/Tilt Position......................................................................................................................... 13 6 Test Positions For Body-worn And Other Similar Configurations...................................................... 14 7 Simulating Liquid Parameters Check ................................................................................................ 15 7.1 Simulating Liquid Parameter Check Result .............................................................................. 16 8 System Performance Check ............................................................................................................. 22 8.1 System Performance Check Results .......................................................…

Text truncated - open the document above for the full version.

Date/Time: 9/6/2005 10:18:51 AMDate/Time: 9/6/2005 10:24:18 AM Test Laboratory: Compliance Certification Services System Performance Check @ 835MHz DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.936 mho/m; ε r = 42.2; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.5 deg. C; Liquid Temperature: 23.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 d=15mm, Pin=250mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.02 mW/g d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 57.8 V/m; Power Drift = -0.022 dB Peak SAR (extrapolated) = 3.83 W/kg SAR(1 g) = 2.51 mW/g; SAR(10 g) = 1.62 mW/g Maximum value of SAR (measured) = 3.07 mW/g 0 dB = 3.07mW/g Date/Time: 9/6/2005 10:30:21 AM Test Laboratory: Compliance Certification Services System Performance Check @ 835MHz DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 d=15mm, Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 3.13 mW/g Date/Time: 9/8/2005 10:20:17 AMDate/Time: 9/8/2005 10:25:43 AM Test Laboratory: Compliance Certification Services System Performance Check @ 835MHz DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 Medium parameters used: f = 835 MHz; σ = 0.907 mho/m; ε r = 40.6; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.75, 9.75, 9.75); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 d=15mm, Pin=250mW/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 3.10 mW/g d=15mm, Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 59.1 V/m; Power Drift = 0.01 dB Peak SAR (extrapolated) = 3.88 W/kg SAR(1 g) = 2.55 mW/g; SAR(10 g) = 1.66 mW/g Maximum value of SAR (measured) = 3.13 mW/g 0 dB = 3.13mW/g Date/Time: 9/8/2005 10:31:42 AM Test Laboratory: Compliance Certification Services System Performance Check @ 835MHz DUT: Dipole 835 MHz; Type: D835V2; Serial: D835V2 - SN:4d002 Communication System: CW; Frequency: 835 MHz;Duty Cycle: 1:1 d=15mm, Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 3.17 mW/g Date/Time: 9/9/2005 2:54:56 PMDate/Time: 9/9/2005 2:59:10 PM Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.45 mho/m; ε r = 39.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(7.95, 7.95, 7.95); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 1; Type: SAM 1; Serial: 1185 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 d=10mm; Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.5 mW/g d=10mm; Pin=250mW/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 98.1 V/m; Power Drift = 0.012 dB Peak SAR (extrapolated) = 18.3 W/kg SAR(1 g) = 10 mW/g; SAR(10 g) = 5.14 mW/g 0 dB = 13.5mW/g Date/Time: 9/9/2005 3:05:13 PM Test Laboratory: Compliance Certification Services System Performance Check @ 1900MHz DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN:5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 d=10mm; Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 14.0 mW/g

Date/Time: 9/8/2005 4:03:30 PMDate/Time: 9/8/2005 4:09:57 PM Test Laboratory: Compliance Certification Services 1_Host # 1_Toshiba Satellite DUT: Sierra Wireless; Type: AirCard 860; Serial: X1720158064E2 Communication System: GSM850; Frequency: 837 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 837 MHz; σ = 0.95 mho/m; ε r = 52.6; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 GSM850 2Slot_M-ch/Area Scan (10x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.315 mW/g GSM850 2Slot_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 18.2 V/m; Power Drift = -0.00 dB Peak SAR (extrapolated) = 0.454 W/kg SAR(1 g) = 0.283 mW/g; SAR(10 g) = 0.179 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.355 mW/g Date/Time: 9/8/2005 4:16:09 PM Test Laboratory: Compliance Certification Services 1_Host # 1_Toshiba Satellite DUT: Sierra Wireless; Type: AirCard 860; Serial: X1720158064E2 Communication System: GSM850; Frequency: 837 MHz;Duty Cycle: 1:4 GSM850 2Slot_M-ch/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.340 mW/g Date/Time: 9/8/2005 4:46:42 PMDate/Time: 9/8/2005 4:53:11 PM Test Laboratory: Compliance Certification Services 1_Host # 1_Toshiba Satellite DUT: Sierra Wireless; Type: AirCard 860; Serial: X1720158064E2 Communication System: GSM850; Frequency: 837 MHz;Duty Cycle: 1:4 Medium parameters used (interpolated): f = 837 MHz; σ = 0.95 mho/m; ε r = 52.6; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV4 - SN3552 ; ConvF(9.72, 9.72, 9.72); Calibrated: 3/19/2005 - Sensor-Surface: 2.5mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 2/7/2005 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 EDGE850 2Slot_M-ch/Area Scan (10x7x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.094 mW/g EDGE850 2Slot_M-ch/Zoom Scan (5x5x7)/Cube 0: Measurement grid: dx=7.5mm, dy=7.5mm, dz=5mm Reference Value = 9.95 V/m; Power Drift = -0.070 dB Peak SAR (extrapolated) = 0.135 W/kg SAR(1 g) = 0.086 mW/g; SAR(10 g) = 0.055 mW/g Info: Interpolated medium parameters used for SAR evaluation! Maximum value of SAR (measured) = 0.107 mW/g Date/Time: 9/8/2005 5:04:20 PMDate/Time: 9/8/2005 5:10:45 PM Test Laboratory: Compliance Certification Services 1_Host # 1_Toshiba Satellite DUT: Sierra Wireless; Type: AirCard 860; Serial: X1720158064E2 Communication System: WCDMA; Frequency: 836.4 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.4 MHz; σ = 0.95 mho/m; ε r = 52.6; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 23.0 deg. C; Liquid Temperature: 22.0 deg. C DA…

Text truncated - open the document above for the full version.