Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 1 | 96 | 3.55 GHz - 3.70 GHz | 298.50 mW | 38M1G7D | 0.0189ppm |
| 2 | 96 | 3.55 GHz - 3.70 GHz | 123.00 mW | 38M3W7D | 0.0189ppm |
| 3 | 96 | 3.55 GHz - 3.70 GHz | 309.70 mW | 27M8G7D | 0.0189ppm |
| 4 | 96 | 3.55 GHz - 3.70 GHz | 247.70 mW | 13M7W7D | 0.0189ppm |
| 5 | 96 | 3.55 GHz - 3.70 GHz | 158.50 mW | 38M1G7D | 0.0047ppm |
| 6 | 96 | 3.55 GHz - 3.70 GHz | 93.50 mW | 38M1W7D | 0.0047ppm |
| 7 | 96 | 3.55 GHz - 3.70 GHz | 166.70 mW | 18M4G7D | 0.0047ppm |
| 8 | 96 | 3.55 GHz - 3.70 GHz | 145.90 mW | 13M9W7D | 0.0047ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesPower out is conducted at the antenna terminal. Single Modular Approval.
RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB 447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures as documented in this filing. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/27/90. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to KDB publications. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application.
This device supports E-UTRA Band 48 and 5GNR Band n48 with some Bandwidth modes according to 3GPP protocol. This device also contains the transmitter of UMTS Bands 2/4/5, E-UTRA Bands 2/4/5/7/12/13/14/17/25/26/41/42/66/71 and 5GNR Bands n2/n5/n7/n12/n13/n14/n25/n26/n30/n41/n66/n70/n71/n77/n78.
