N7NHL79Module

Sierra Wireless, ULC 13811 Wireless Way Richmond BC, V6V 3A4 Canada Tel: 604-231-1100 ; Fax: 604-231-1109 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Certification designating a U.S. agent for service of process pursuant to Part 2.911(d)(7) To whom it may concern, Sierra Wireless, ULC, Grantee Code: N7N, FRN: 0005810874 (“the applicant”) certifies that, as of the date of the filing of application, Semtech Corporation (“the agent”) is designated as the U.S. agent for the purpose of accepting service of process on behalf of the applicant. The physical U.S. address, email for the designated agent are: Physical U.S. address: 200 Flynn Road, Camarillo, California, 93012-8790 Email: [email protected] FRN: 0026496067, 0027931203 The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges their responsibility to inform the FCC whenever the agent information changes. The agent accepts the designation by (the applicant) as the U.S. agent to accept service of process includes, but is not limited to, delivery of any correspondence, notices, orders, decisions, and requirements of administrative, legal, or judicial process related to Commission proceedings. Signed by the Applicant Signed by the Agent (if different from the Applicant) Name: Ying Wang Name: Ying Wang Title: Director, Regulatory Compliance Title: Director, Regulatory Compliance Email: [email protected] Email: [email protected] TEL: 604-232-1440 TEL: 604 232 1440 Date: September 6, 2023 Date: September 6, 2023

Covered list Attestation Statement Date: August 5, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: N7NHL79 Sierra Wireless, ULC certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature Contact Name: Denis Chabot Job Title: Director, Certification Email: [email protected]

Covered list Attestation Statement Date: August 5, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: N7NHL79 Sierra Wireless, ULC certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signature Contact Name: Denis Chabot Job Title: Director, Certification Email: [email protected]

Authorization Letter Date: August 5, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: N7NHL79 To Whom It May Concern: We, the undersigned, hereby authorize the following person on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by DEKRA Testing and Certification Co., Ltd. on our behalf shall have the same effect as acts of our own. Agent Company name : DEKRA Testing and Certification Co., Ltd. Address : No. 26, Hwaya 1st Road., Guishan District, Taoyuan City, 33341, Taiwan Contact Name : Phoenix Chen Email : [email protected] We are therefore responsible for the contents of the application. Product description : Module Model No. : HL7900 Brand : Semtech Sincerely, Signature Contact Name: Denis Chabot Job Title: Director, Certification Email: [email protected]

Modular Approval Request Letter Date: August 5, 2024 FCC ID: N7NHL79 To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement EUT 1. The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. Module Radio elements are shielded. Please see submitted external photograph exhibits 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. Module chipset design incorporates integrated buffer circuitry 3. The modular transmitter must have its own power supply regulation. Module chipset incorporates voltage regulation to transceiver circuitry 4. The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. Not applicable to licensed modules 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. EUT conformance testing was performed in a standalone configuration 6. The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. Please refer to FCC ID label format. Labeling instruction has been provided in the user manual exhibit(s). 7. The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. The Module is compliant with all applicable FCC rules. Compliance requirements are stated in the user manual exhibit(s). 8. The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. Compliance with RF exposure requirements is addressed in RF exposure report Signature Contact Name: Denis Chabot Job Title: Director, Certification Email: [email protected]

Confidential Request Letter Date: August 5, 2024 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Request for confidentiality FCC ID: N7NHL79 Long-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential treatment of information accompanying this application as outlined below: Schematics Theory of Operation Block Diagrams Tune-up procedure The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Short-Term Confidentiality (STC) Pursuant to DA04-1705 June 15, 2004 of the Commission’s public notice, we also request temporary confidential treatment of information accompanying this application as outlined below: Internal Photos User’s Manual External Photos Test Set-up Photos Justification: Due to market confidential, we ask for the short-term confidentiality. Planned Release Date STC: If no date is given, 180 days from grant date will be used. Sincerely, Signature Contact Name: Denis Chabot Job Title: Director, Certification Email: [email protected]

September 7, 2016 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Authorization Letter for Grantee Code N7N Dear Sir/Madam: I hereby authorize Mr. Denis Chabot of Sierra Wireless to act on my behalf in all manners relating to the application for equipment authorization including signing of all documents relating to these matters. Any and all acts carried out by Mr. Denis Chabot of Sierra Wireless on my behalf shall have the same effect as acts of my own. Sincerely, Ying Wang Manager, Regulatory Compliance

Title: 3JWJW 2JWJW 1JWJW RevDraftCheck DETAILS Change "Semtech" font from trillium to Arial Narrow Date Feb/2024 Nov/2023 Dec/2023 LASER MARKING SPEC,SEMTECH ON TOP, HL79XX,STAGE 1 5307910REV 3 PAGE 1 OF 3 Notes Copyright (2016) Replace “Sierra Wireless” with Semtech in the same size and font. THIS DOCUMENT, SUBMITTED IN CONFIDENCE, CONTAINS PROPRIETARY INFORMATION WHICH SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR MANUFACTURING OR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION OF SIERRA WIRELESS, INC. Initial Release HL79XX HL79XX 14.45mm 17.60 mm Note that barcode representations are for reference only; relative lengths, widths and shapes of bars are to be printed in compliance with the barcode format called out in Table 1 on page 2 NOT TO SCALE, TYPICAL REPRESENTATION FIGURE 1 FIGURE 2 3 1 2 Semtech Semtech REF 1 2 3 [FSN value assigned to device] [Semtech] 4.00 +/-0.05 Height (millimeters) [Product Name] Data Source (Static text in " ") Note (i) - For serial number format, refer to Agile Doc# specified in BOM on the relevant PCA Note (ii) - For Product Name Data Source, refer to the 'Description' field in the 'Title Block' tab of this PCA assembly in Agile, and etch the text that is between the first and second comma in that field Barcode Text Static/ DynamicTypeSymbologyComments See Note (i) Arial Narrow Arial Narrow 1.0 +/- 0.2 See Note (ii) Italicized items denote punctuation, spaces or line-breaks to be included as part of the data source 1.0 +/- 0.2Static Data MatrixDynamic Static Text 5307910_LASER MARKING SPEC, Rev 3 PAGE 2 OF 3 NOTES: a) Minimum X-dimensions for all barcodes are to be at least 0.127mm (5.0-mil) unless otherwise specified in the Comments column of each reference in Table 1. b)All 2D barcodes are to be encoded in Data Matrix (ECC 200) symbology. Minimum X-dimension for all 2D barcodes are to be 0.339mm (13.3mil). There must be an undisturbed white region on all foursides of each barcode, minimum 0.4mm on each side. c)For positioning of barcodes, and positioning of barcode human readables relative to the barcodes, refer to Figure 1 on page 1. d)For all text listed in Table 1: -If font style for an item is listed as "N/A", recommended font style is Arial, but factory may select any suitable font for that item. -If font style is specifically mentioned for a specific item, factory must print using the mentioned font style for the item. e)For all items that are Logo type, factory is to refer to document 2102319 and use the corresponding logo found in that document. Factory must also respect the Aspect Ratio requirement of each logo. Maximum aspect ratio deviation of ±10% is allowed. PRINTING NOTES: I)Note that this is a base part print spec drawing. For label blank stock material and mechanical specifications refer to item on BOM with identical REF DES as this print spec drawing. II)Barcodes must meet print quality requirements as outlined in the “General Cosmetic Spec for SWI Products” document (Item #2140122). 5307910_LASER MARKING SPEC, Rev 3 PAGE 3 OF 3 Vera Hsu (徐紀豫) 寄件者:Certification Bureau / Bureau homologation (IC) <[email protected]> 寄件日期: 2024年8月13日星期二 下午 10:38 收件者:Denis Chabot 主旨:RE: Labelling on HL7900 Good Day, Thank you for the inquiry. ISED has reviewed the provided information to determine if the product meets product label exemption requirements. This product is being approved for product label exemption. The product label information shall be provided in the product manual/literature and on the product packaging. Regards, Certification and Engineering Bureau Engineering, Planning and Standards Branch Innovation, Science and Economic Development Canada / Government of Canada [email protected] / Tel: 613-990-4218 / TTY: 1-866-694-8389 Bureau d'homologation et services techniques (CEB14) Direction générale du génie, de la planification et des normes Innovation, Sciences et Développement économique Canada /Gouvernement du Canada [email protected] / Tél : 613-990-4218 / Télécopieur 613-990-4752 / ATS: 1- 866-694-8389 From: Denis Chabot <[email protected]> Sent: Monday, August 12, 2024 10:06 PM To: Certification Bureau / Bureau homologation (IC) <[email protected]> Subject: Labelling on HL7900 To Whom It May Concern, Sierra Wireless is in the process of applying for IC certification for a radio module Model HL7900. The HL7900 module is a Surface Mount Device soldered onto the end product and is not possible for the end-user to replace or remove from the end product. In an effort to reduce the amount of paper/plastic/adhesive label consumption and be a good environmental corporate role model, Sierra Wireless uses laser etching instead of the traditional labels for the module. The laser etching process requires a “no etch” circular area in the centre of the module so that modules can be picked up by vacuum nozzles. The photo and dimensions of the module are shown below. Caution: This email originated outside of Semtech. Due to the small size of the product and the “no etch” area (marked grey) required for the laser etching process, it is not practical to mark the FCC Identifier and IC certification number in a font size of 4 points or larger. Pursuant to FCC Rule §2.925, the FCC Identifier will be placed in the user manual and on the device packaging. Sierra Wireless hereby seeks agreement from ISED to place the IC certification number in the user manual in accordance with Section 4 of RSS-Gen Issue 5. I look forward to your reply. Regards, Denis CHABOT Director, Certification To view our privacy policy, including the types of personal information we collect, process and share, and the rights and options you have in this respect, see www.semtech.com/legal.

Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 1 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 Test Report No: 2420385R-RFUSV17S-A RF EXPOSURE EVALUATION DECLARATION Product Name Module Brand Name Semtech Model No. HL7900 FCC ID N7NHL79 Applicant ́s Name / Address Sierra Wireless, ULC 13811 Wireless Way, Richmond, BC V6V 3A4, Canada Manufacturer’s Name / Address Sierra Wireless, ULC 13811 Wireless Way, Richmond, BC V6V 3A4, Canada Te s t Method Requested, Standard FCC CFR Title 47 Part 2.1091 Radiofrequency radiation exposure evaluation: mobile devices. Verdict Summary IN COMPLIANCE Documented By Amelia Wu Approved By Rueyyan Lin Date of Receipt Feb. 23, 2024 Date of Issue Aug. 02, 2024 Report Version V1.0 Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 2 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 INDEX page Competences and Guarantees ................................................................................................................................ 3 General Conditions .................................................................................................................................................. 3 Revision History ....................................................................................................................................................... 4 1. General Information ............................................................................................................................... 5 1.1. EUT Description .................................................................................................................................... 5 1.2. Testing Location Information ................................................................................................................. 6 2. RF Exposure Evaluation ........................................................................................................................ 7 2.1. Test Limit ............................................................................................................................................... 7 2.2. Test Result of RF Exposure Evaluation ................................................................................................. 8 Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 3 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 Competences and Guarantees DEKRA is a testing laboratory competent to carry out the tests described in this report. In order to assure the traceability to other national and international laboratories, DEKRA has a calibration and maintenance program for its measurement equipment. DEKRA guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated in the report and it is based on the knowledge and technical facilities available at DEKRA at the time of performance of the test. DEKRA is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the particular item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA. General Conditions 1. The test results relate only to the samples tested. 2. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. 3. This report must not be used to claim product endorsement by TAF or any agency of the government. 4. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. 5. Measurement uncertainties evaluated for each testing system and associated connections are given here to provide the system information for reference. Compliance determinations do not take into account measurement uncertainties for each testing system, but are based on the results of the compliance measurement. Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 4 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 Revision History Version Description Issued Date V1.0 Initial issue of report Aug. 02, 2024 Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 5 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 1. General Information 1.1. EUT Description RF General Information Evaluation Mode Band Uplink Frequency (MHz) Downlink Frequency (MHz) Modulation Type WWAN 4G LTE Band 2 1850 ~ 1910 1930 ~ 1990 Cat-M1: QPSK / 16QAM NB-IoT: BPSK / QPSK LTE Band 4 1710 ~ 1755 2110 ~ 2115 LTE Band 5 824 ~ 849 869 ~ 894 LTE Band 12 699 ~ 716 729 ~ 746 LTE Band 13 777 ~ 787 746 ~ 756 LTE Band 25 1850 ~ 1915 1930 ~ 1995 LTE Band 26 814 ~ 849 859 ~ 894 LTE Band 66 1710 ~ 1780 2110 ~ 2200 LTE Band 70 1695~1710 1995~2020 LTE Band 85 698 ~ 716 728 ~ 746 Note: The above EUT information is declared by the manufacturer. Report No.：2420385R-RFUSV17S-A TEL : +886-3-582-8001 Page Number : 6 of 8 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 1.2. Testing Location Information Testing Location Information Test Laboratory：DEKRA Testing and Certification Co., Ltd. 1 ADD: No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. (TAF: 3024) TEL: +886-3-582-8001 FAX: +886-3-582-8958 Test site Designation No. TW3024 with FCC. Conformity Assessment Body Identifier (CABID) TW3024 with ISED. 2 ADD: No.372, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan, R.O.C. (TAF: 3024) TEL: +886-3-582-8001 FAX: +886-3-582-8958 Test site …

Text truncated - open the document above for the full version.

Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3900 Series: Omni Antenna Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. For more information: Pulse Worldwide HeadquartersPulse/Larsen AntennasEurope HeadquartersPulse (Suzhou) Wireless Products Co, Inc. 15255 Innovation Drive #100Pulse GmbH & Do, KG99 HuoJuRoad(#29 Bldg,4 th Phase San Diego, CA 92128Vancouver, WA 98683Zeppelinstrasse15Suzhou New District USAUSAHerrenberg, Germany Jiangsu Province, Suzhou 215009 PR China Tel:1-858-674-8100Tel: 1-360-944-7551 - Tel: 49 7032 7806 0 Tel: 86 512 6807 9998 18110 SE 34 th St Bldg2 Suite 250 Features: Applications: All dimensions are in mm / inches 1 •617-960 MHz •1400-2700 MHz •3200-3900 MHz •Omni pattern in H-plane •Gain 1 / 2.5 / 3 dBi •Power rating 5W •IP65 •RoHS Compliant •LTE Routers / Gateways •4G / 5G LTE •617-960/1400-2170/2300- 2700/3200-3900MHz •Includes New Band 71 (617- 698 MHz) and CBRS Bands 42 and 48 (3.4-3.7 GHz) Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3900 Series: Omni Antenna 2 Frequency 617-960/1400-2700/3200-3900 MHz NominalImpedance50 VSWR3:1(Max) Radiation PatternOmni Peaking Gain (typical)1dBi @617-960MHz Peaking Gain (typical)2.5 dBi@1400-2700MHz Peaking Gain (typical)3 dBi@3200-3900MHz Efficiency (typical)45% @617-960MHz Efficiency (typical)70% @1400-2700MHz Efficiency (typical)70% @3200-3900MHz PolarizationLinear-Vertical Power Withstanding5W MECHANICALSPECIFICATIONS ELECTRICAL SPECIFICATIONS Plastic radomeABS/PC ColorBlack Connector TypeSMA-M FlammabilityUL94-V0 Ingress ProtectionIP65 Weight56.8 g Overall Length 228.84[9.01] mm [INCHES] Position0°, 45°& 90° Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3900 Series: Omni Antenna 3 ENVIRONMENTAL SPECIFICATIONS Operating temperature range-40/+85 °C Non-operating temperature range-40/+85 °C Temperature Shock3 CYCLES, -25°C TO +70°C AT 5°PER MIN Humidity Cyclic Mil-Std-810 Method 507.3, Procedure III 5 cycles @ 95% RH Vibration Random 5-500 Hz FREQ, MIL STD 810 G section 514.4 Mechanical Shocks 4.78 m/s Drop test 1 meter, 10 times to tile RoHS CompliantYes Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3900 Series: Omni Antenna 4 MECHANICALDRAWING Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3900 Series: Omni Antenna 5 TEST SETUP Setup1: straight Setup2: bending-90º Note: All is test in free space. And the Radiation Pattern 2D is only test in setup1-straight. Issue: 1850 In the effort to improve our products, we reserve the right to make changes judged to be necessary. CONFIDENTIAL AND PROPRIETARY INFORMATION This document contains confidential and proprietary information ofPulse Electronics, Inc. (Pulse) and is protected by copyright, trade secret and other state and federal laws. Its receipt or possession does not convey any rights to reproduce, disclose its contents, or to manufacture, use or sell anything it may describe. Reproduction, disclosure or use without specific written authorization of Pulse is strictly forbidden. Description: Multiband Swivel Dipole 617-3900MHz PART NUMBER: SPDA24617/3…

Text truncated - open the document above for the full version.

Report No.：2420385R-RFUSV24S-A TEL : +886-3-582-8001 Page Number : 1 of 20 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 Test Report No: 2420385R-RFUSV24S-A TEST REPORT FCC Rules&Regulations Product Name Module Brand Name Semtech Model No. HL7900 FCC ID N7NHL79 Applicant ́s Name / Address Sierra Wireless, ULC 13811 Wireless Way, Richmond, BC V6V 3A4, Canada Manufacturer’s N ame / Address Sierra Wireless, ULC 13811 Wireless Way, Richmond, BC V6V 3A4, Canada Te s t Method Requested, Standard FCC CFR Title 47 Part 22 Subpart H FCC CFR Title 47 Part 24 Subpart E FCC CFR Title 47 Part 27 Subpart F, Subpart L FCC CFR Title 47 Part 90 Subpart S ANSI/TIA-603-E-2016 ANSI C63.26-2015 Verdict Summary IN COMPLIANCE Documented By Amelia Wu Approved By Rueyyan Lin Date of Receipt Feb. 23, 2024 Date of Issue Aug. 02, 2024 Report Version V1.0 Report No.：2420385R-RFUSV24S-A TEL : +886-3-582-8001 Page Number : 2 of 20 FAX : +886-3-582-8958 Issued Date : Aug. 02, 2024 Report Version : V1.0 INDEX page Competences and Guarantees ............................................................................................................................... 4 General Conditions ................................................................................................................................................. 4 Revision History ...................................................................................................................................................... 5 Summary of Test Result .......................................................................................................................................... 6 Comments and Remarks ........................................................................................................................................ 7 1.General Information................................................................................................................................. 8 1.1. EUT Description ...................................................................................................................................... 8 1.2. EUT Information ...................................................................................................................................... 9 1.3. Testing Applied Standards ...................................................................................................................... 9 1.4. Testing Location Information ................................................................................................................. 10 1.5. Measurement Uncertainty ..................................................................................................................... 10 1.6. List of Test Equipment ........................................................................................................................... 11 2.Test Configuration of EUT ..................................................................................................................... 12 2.1. Test Condition ....................................................................................................................................... 12 2.2. The Worst Case Measurement Configuration ...................................................................................... 12 2.3. Tested System Details .........................................................................................................................…

Text truncated - open the document above for the full version.