FCCID.CO- FCC ID Database
HomeCompaniesEquipment ClassesSearch

© 2026 FCC ID Database. All rights reserved.

AboutContactData sourced from FCC public records
  1. Home/
  2. Sierra Wireless, ULC/
  3. N7NAR5550

N7NAR5550Dual band (800 & 1900) CDMA 1X & EVDO Module

Sierra Wireless, ULC
Dual band (800 & 1900) CDMA 1X & EVDO Module - FCC ID N7NAR5550 - Sierra Wireless, ULC
Click to zoom

Application Details

Equipment Class
PCB - PCS Licensed Transmitter
Date of Grant
Dec 02, 2010
Application Purpose
Original Equipment
Date of Application
Dec 02, 2010
Equipment Note
Dual band (800 & 1900) CDMA 1X & EVDO Module
Frequency Range
1851.25000000 - 1908.75000000
Company
Sierra Wireless, ULC
Country
Canada

Documents & Files

Select a file to view

Users Manual

↗

Cover Letter(s)

↗
↗
↗
↗

External Photos

↗

ID Label/Location Info

↗

Internal Photos

↗

Test Report

↗

Test Setup Photos

↗

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

Preliminary 0.5 June 21, 2010 AirPrime AR Series Product Specification Preliminary Rev 0.5 June 21, 2010 2 Product Specification Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitations of Liability This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or noninfringement. The recipient of the manual shall endorse all risks arising from its use. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Preliminary Rev 0.5 June 21, 2010 3 Product Specification Patents Portions of this product may be covered by some or all of the following US patents: 5,515,013 5,629,960 5,845,216 5,847,553 5,878,234 5,890,057 5,929,815 6,169,884 6,191,741 6,199,168 6,339,405 6,359,591 6,400,336 6,516,204 6,561,851 6,643,501 6,653,979 6,697,030 6,785,830 6,845,249 6,847,830 6,876,697 6,879,585 6,886,049 6,968,171 6,985,757 7,023,878 7,053,843 7,106,569 7,145,267 7,200,512 7,295,171 7,287,162 D442,170 D459,303 D599,256 D560,911 and other patents pending. This product includes technology licensed from QUALCOMM ® 3G Manufactured or sold by Sierra Wireless or its licensees under one or more patents licensed from InterDigital Group. Copyright © 2010 Sierra Wireless. All rights reserved. Trademarks AirCard ® and Watcher ® are registered trademarks of Sierra Wireless. Sierra Wireless™, AirPrime™, AirLink™, AirVantage™ and the Sierra Wireless logo are trademarks of Sierra Wireless. , , ® , inSIM ® , WAVECOM ® , WISMO ® , Wireless Microprocessor ® , Wireless CPU ® , Open AT ® are filed or registered trademarks of Sierra Wireless S.A. in France and/or in other countries. Windows ® and Windows Vista ® are registered trademarks of Microsoft Corporation. Macintosh and Mac OS are registered trademarks of Apple Inc., registered in the U.S. and other countries. QUALCOMM ® is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of the respective owners. Contact Information Sales Desk: Phone: 1-604-232-1488 Hours: 8:00 AM to 5:00 PM Pacific Time E-mail: [email protected] Post: Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Fax: 1-604-231-1109 Web: www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases: www.sierrawireless.com Preliminary Rev 0.5 June 21, 2010 4 Product Specification Document History Version Date Updates 0.1 December 9, 2009 Creation 0.2 December 14, 2009 Updates for Preliminary release Preliminary Rev 0.5 June 21, 2010 5 Contents 1. OVERVIEW .......................................................................................................... 8 1.1. Reference Specifications ................................................................................................... 8 2. FEATURES .......................................................................................................... 9 2.1. Modes of Operation .........…

Text truncated - open the document above for the full version.

Cover Letter(s)

Sierra Wireless America, Inc 2290 Cosmos Ct. Carlsbad CA, 92011 Tel. 760-476-8700 Fax 760-476-8701 AUTHORIZATION LETTER DATE: 20 February , 2007 Compliance Certification Services Certification Division 47173 Benicia Street Fremont, CA 94538 To whom it may concern: We, the undersigned, hereby authorize the Testing Division of Compliance Engineering Services, Inc., d.b.a. Compliance Certification Services and hereafter referred to as CCS, to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CCS on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing CCS Testing Division as our agent, we still recognize that we are responsible to: a) comply with the relevant provisions of the certification program; b) make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints; c) make claims regarding certification only in respect of the scope for which certification has been granted; d) do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized; e) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division; f) use certification only to indicate the products are certified as being in conformity with specified standards; g) endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner; h) ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division; i) keep a record of all complaints made known to the us relating to the product’s compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested; j) take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification; k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely, Todd Van Cleave Manager Engineering Services Carlsbad Research & Development Sierra Wireless America, Inc.

Cover Letter(s)

Sierra Wireless America, Inc 2200 Faraday Ave Suite 150 Carlsbad CA, 92008 Tel. 760-476-8700 Fax 760-476-8701 CONFIDENTIALITY LETTER DATE: 1 November, 2010 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 Re: Sierra Wireless, Request for Confidentiality FCC ID: N7NAR5550 Request for Confidentiality To whom it may concern, Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential documents from public disclosure indefinitely. Block Diagram Circuit Description Schematic Tune up and Alignment Procedure Above mentioned documents contain detailed system/ equipment descriptions and related information about the product in which Sierra Wireless considers to be proprietary, confidential, and a custom design and, otherwise, would not release to the general public. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04- 1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential for 180 days. We are requesting the commission to grant short-term confidentiality request on the following attachments: Test Setup Photos It is our understanding that all measurement test reports, FCC ID label format and correspondence during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Sincerely Todd Van Cleave Manager Engineering Services Carlsbad Research & Development Sierra Wireless America, Inc.

Cover Letter(s)

Sierra Wireless America, Inc 2200 Faraday Ct. Ste. 150 Carlsbad CA, 92008 Tel. 760-476-8700 Fax 760-476-8701 FCC ID: N7NAR5550 Request for transmitter modular approval Transmitter Module Characteristics Item Requirements EUT 1 Have its own RF shielding Device is equipped with Metal shielding to cover RF section. Refer to external photos 2 Have buffered modulation/data inputs (if such inputs are provided), All inputs to the modules are buffered through logic or microprocessor inputs. 3 Have it own power supply regulation Internal 1.3V power regulator. Refer to Block diagram 4 Meet the antenna requirements of Section 15.203 Device is equipped with unique antenna SMT pad. Refer to external photos 5 Be tested in a stand-alone configuration, i.e., the antenna, AC or DC power and data input/output lines must be connected to the module but, the module must not be inside another case during testing Device was tested on a supplied development platform for limited modular approval. Refer to setup photos. 6 Be labeled with its own FCC ID number, and if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. FCC ID label is placed on the metal shielding of the modem. Labeling instruction has been provided in the OEM installation instruction. Refer to FCC ID label format and location file. 7 The modular transmitter is manufactured so that the user cannot influence the operation of the transmitter that will operate outside of the scope of the regulations. Reference “User’s Guide. 8 Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1091. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). MPE was calculated. Sincerely, Todd Van Cleave Manager Engineering Services Carlsbad Research & Development Sierra Wireless America, Inc.

Cover Letter(s)

January 8, 2008 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Authorization Letter for Grantee Code N7N Dear Sir/Madam: I hereby authorize Mr. Todd Van Cleave of Sierra Wireless to act on my behalf in all manners relating to the application for equipment authorization including signing of all documents relating to these matters. Any and all acts carried out by Mr. Todd Van Cleave of Sierra Wireless on my behalf shall have the same effect as acts of my own. Sincerely, Ying Wang Staff Regulatory Specialist

ID Label/Location Info

AR5550 Product Label

Test Report

FCC CFR47 PART 22 SUBPART H FCC CFR47 PART 24 SUBPART E INDUSTRY CANADA RSS-132 ISSUE 2 INDUSTRY CANADA RSS-133 ISSUE 5 CERTIFICATION TEST REPORT FOR DUAL- BAND CDMA (1XRTT & EVDO) MODULE MODEL NUMBER: AR5550 FCC ID: N7NAR5550 IC: 2417C-AR5550 REPORT NUMBER: 10U13438-1, Revision B ISSUE DATE: DECEMBER 02, 2010 Prepared for SIERRA WIRELESS INC. - YW 13811 WIRELESS WAY RICHMOND, BRITISH COLUMBIA V6V3A4, CANADA Prepared by COMPLIANCE CERTIFICATION SERVICES (UL CCS) 47173 BENICIA STREET FREMONT, CA 94538, U.S.A. TEL: (510) 771-1000 FAX: (510) 661-0888 REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 2 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS Revision History Rev. Issue Date Revisions Revised By --- 10/21/10 Initial Issue T. Chan A 11/23/10 Replace EIRP peak data to EIRP Average data M. Mekuria B 12/02/10 Revised EUT description on page 7 A. Zaffar REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 3 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS TABLE OF CONTENTS 1. ATTESTATION OF TEST RESULTS.................................................................................... 4 2. TEST METHODOLOGY ........................................................................................................ 5 3. FACILITIES AND ACCREDITATION.................................................................................... 5 4. CALIBRATION AND UNCERTAINTY .................................................................................. 5 4.1. MEASURING INSTRUMENT CALIBRATION ............................................................... 5 4.2. SAMPLE CALCULATION.............................................................................................. 5 4.3. MEASUREMENT UNCERTAINTY................................................................................ 5 5. EQUIPMENT UNDER TEST ................................................................................................. 6 5.1. DESCRIPTION OF EUT................................................................................................ 6 5.2. MAXIMUM OUTPUT POWER....................................................................................... 6 5.3. SOFTWARE AND FIRMWARE..................................................................................... 6 5.4. WORST-CASE CONFIGURATION AND MODE .......................................................... 7 5.5. DESCRIPTION OF TEST SETUP................................................................................. 8 6. TEST AND MEASUREMENT EQUIPMENT ....................................................................... 11 7. OUTPUT POWER VERIFICATION ..................................................................................... 12 7.1. CDMA2000 1xRTT ...................................................................................................... 12 7.2. CDMA200 1xEv-Do ..................................................................................................... 14 7.2.1. Release 0 (Rel. 0) ............................................................................................... 14 7.2.2. Revision A (Rev. A) ............................................................................................. 15 8. CONDUCTED TEST RESULTS .......................................................................................... 16 8.1. OCCUPIED BANDWIDTH........................................................................................... 16 8.2. RF POWER OUTPUT ................................................................................................. 23 8.3. SPURIOUS EMISSION AT ANTENNA TERMINAL .................................................... 31 8.4. FREQUENCY STABILITY........................................................................................... 52 9. RADIATED TEST RESULTS .............................................................................................. 55 9.1. RADIATED POWER (ERP & EIRP) ............................................................................ 55 9.2. FIELD STRENGTH OF SPURIOUS RADIATION ....................................................... 60 9.3. RECEIVER SPURIOUS EMISSIONS ......................................................................... 65 9.4. POWER LINE CONDUCTED EMISSION ................................................................... 70 10. MAXIMUM PERMISSIBLE EXPOSURE ........................................................................ 76 11. SETUP PHOTOS ............................................................................................................ 80 REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 4 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS 1. ATTESTATION OF TEST RESULTS COMPANY NAME: SIERRA WIRELESS INC. - YW 13811 WIRELESS WAY RICHMOND, BRITISH COLUMBIA V6V3A4, CANADA EUT DESCRIPTION: DUAL- BAND CDMA (1XRTT & EVDO) MODULE MODEL: AR5550 SERIAL NUMBER: 1026060032 DATE TESTED: OCTOBER 07 TO 20, 2010 APPLICABLE STANDARDS STANDARD TEST RESULTS FCC PART 22H & 24E Pass IC RSS-132 ISSUE 2 & RSS-133 ISSUE 5 Pass Compliance Certification Services (UL CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by UL CCS based on interpreta…

Text truncated - open the document above for the full version.

Test Setup Photos

REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 80 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS 11. SETUP PHOTOS ANTENNA PORT CONDUCTED RF MEASUREMENT SETUP ENVIRONMENTAL CHAMBER PHOTO ANTENNA PORT CONDUCTED PHOTO REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 81 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS RADIATED RF MEASUREMENT SETUP FOR MOBILE CONFIGURATION X-AXIS PHOTO Y-AXIS PHOTO REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 82 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS AC MAINS LINE CONDUCTED EMISSION AC ADAPTER LINE CONDUCTED EMISSION (FRONT) REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 83 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS LINE CONDUCTED EMISSION (BACK) REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 84 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS SUPPORT LAPTOP LINE CONDUCTED EMISSION (FRONT) REPORT NO: 10U13438-1B DATE: DECEMBER 02, 2010 FCC ID: N7NAR5550 IC ID: 2417C-AR5550 Page 85 of 85 COMPLIANCE CERTIFICATION SERVICES (UL CCS) FORM NO: CCSUP4031B 47173 BENICIA STREET, FREMONT, CA 94538, USA TEL: (510) 771-1000 FAX: (510) 661-0888 This report shall not be reproduced except in full, without the written approval of UL CCS END OF REPORT LINE CONDUCTED EMISSION (BACK)

Contact Information

Applicant

Ying Wang(Director, Regulatory Compliance)
[email protected]604-232-1440Fax: 604-231-1109

Technical Contact

Compliance Certification ServicesThu Chan
[email protected](510) 771-1000

47173 Benicia Street · Fremont, California

Non-Technical Contact

Compliance Certification ServicesThu Chan
[email protected](510) 771-1000

Test Firm

Compliance Certification ServicesThu Chan
[email protected]510-771-1122Fax: 510-661-0888

Technical Specifications

#Rule PartsFrequency RangePower OutputEmissionTolerance
424E1.85 GHz - 1.91 GHz367.00 mW1M29F9W2.5 ppm
Modular Type
Limited Single Modular Approval
Confidentiality
Long Term
Grant Notes
Output power listed is conducted. Limited Modular Approval for use as a module in mobile-only RF exposure conditions. Antenna gain including cable loss must not exceed 4.25 dBi in Cellular Band and 6.1 dBi in PCS band for RF exposure purposes of 2.1091. Highest radiated powers with antennas specified in this filing are 1.071 W ERP for Cellular Band and 0.575 W EIRP for PCS Band. This device is allowed only for OEM integration into host products. Consumer or end-user installation is not allowed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations specified in this filing.

Other Applications from Sierra Wireless, ULC

N7NHL79E

Radio Module

Feb 23, 2026

Equipment Class

PCB - PCS Licensed Transmitter
Radio Module - FCC ID N7NEM92P - Sierra Wireless, ULC
N7NEM92P

Radio Module

Sep 04, 2025

Equipment Class

CBE - Citizens Band End User Devices
N7NHL79

Module

Aug 15, 2024

Equipment Class

PCB - PCS Licensed Transmitter
Radio Module - FCC ID N7NEM92 - Sierra Wireless, ULC
N7NEM92

Radio Module

Sep 26, 2023

Equipment Class

CBE - Citizens Band End User Devices
Radio Module - FCC ID N7NEM75Y - Sierra Wireless, ULC
N7NEM75Y

Radio Module

Sep 10, 2023

Equipment Class

PCB - PCS Licensed Transmitter