N7NAR7550Wireless Module

Prroducct Tec A chnic AirPri cal Sp ime A pecific AR75 catio 50 on Ma 4114188 0.4 rch 29, 2013 41124764188 Rev 0.41 March 20, 2013 2 Product Technical Specification Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where cellular modems are not advised without proper device certifications. These areas include environments where cellular radio can interfere such as explosive atmospheres, medical equipment, or any other equipment which may be susceptible to any form of radio interference. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitations of Liability This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or noninfringement. The recipient of the manual shall endorse all risks arising from its use. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Customer understands that Sierra Wireless is not providing cellular or GPS (including A-GPS) services. These services are provided by a third party and should be purchased directly by the Customer. 41124764188 Rev 0.41 March 20, 2013 3 Product Technical Specification SPECIFIC DISCLAIMERS OF LIABILITY: CUSTOMER RECOGNIZES AND ACKNOWLEDGES SIERRA WIRELESS IS NOT RESPONSIBLE FOR AND SHALL NOT BE HELD LIABLE FOR ANY DEFECT OR DEFICIENCY OF ANY KIND OF CELLULAR OR GPS (INCLUDING A-GPS) SERVICES. Patents This product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM ® . This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from InterDigital Group and MMP Portfolio Licensing. Copyright © 2013 Sierra Wireless. All rights reserved. Trademarks AirCard ® is a registered trademark of Sierra Wireless. Sierra Wireless™, AirPrime™, AirLink™, AirVantage™, Watcher™ and the Sierra Wireless logo are trademarks of Sierra Wireless. , ® , inSIM ® , WAVECOM ® , WISMO ® , Wireless Microprocessor ® , Wireless CPU ® , Open AT ® are filed or registered trademarks of Sierra Wireless S.A. in France and/or in other countries. Windows ® and Windows Vista ® are registered trademarks of Microsoft Corporation. Macintosh and Mac OS are registered trademarks of Apple Inc., registered in the U.S. and other countries. QUALCOMM ® is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of the respective owners. Contact Information Sales Desk: Phone: 1-604-232-1488 Hours: 8:00 AM to 5:00 PM Pacific Time E-mail: [email protected] Post: Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Technical Support: [email protected] RMA Support: [email protected] Fax: 1-604-231-1109 Web: www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases: www.sierrawireless.com 41124764188 Rev 0.41 March 20, 2013 4 Product Technical Specification Document History Version Date Updates 0.1 March 29, 2013 Creation based on document 4112476: AirePrime – AR755x Series – Product Technical Specification – Rev0.4. 4112476 Rev 0.4 March 20, 2013 5 Contents 1. INTRODUCTION ................................................................................................ 11 1.1. General Features ......…

Text truncated - open the document above for the full version.

Modular Approval Checklist FCC ID: Item Requirements EUT 1 The radio elements must have the radio frequency circuitry shielded Module RADIO elements are shielded. Please see submitted external photograph exhibits 2 The module must have buffered modulation/data inputs Module chipset design incorporates integrated buffer circuitry 3 The module must contain power supply regulation on the module Module chipset incorporates voltage regulation to transceiver circuitry 4 The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s) No applicable to licensed modules 5 The module must demonstrate compliance in a stand-alone configuration EUT conformance testing was performed in a standalone configuration 6 The licensed module must have a FCC ID label on the module itself. That FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: N7NSL8084G Please refer to FCC ID label format. Labeling instruction has been provided in the user manual exhibit(s). 7 The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements The Module is compliant with all applicable FCC rules. Compliance requirements are stated in the user manual exhibit(s). 8 The module must comply with RF exposure requirements Compliance with RF exposure requirements is addressed in RF exposure report SL8084T N7NAR7550 AR7550"

Dat Fe d Au 74 3 Col To Re : W e cer pro 522 pur S  B O T Fu r mar we ti m sen In P T Be s Su z App te: April 7, deral Comm thorization 35 Oakland lumbia, MD Whom It M : Confidenti e hereby req rtification, b ovisions of S 2(b)(4) of th rpose of the chematics Block Diagra Operation De Tune Up Pro rthermore, p rketing regu request the me of 180 da nsitive busin ntegration M Product Phot Test Setup Ph st Regards, zi Lan proval Cert 2013 munications and Evalua t Mills Road D 21046 May Concern iality Reque quest that the be withheld f Section 0.45 he Freedom request. am escription ocedure pursuant to P ulations in 4 following e ays from the ness informa Manual tos hotos ification E n Commissio tion Divisio d n: est for FCC e exhibits li from public 57(d) and 0.4 of Informat Public Notic 47 CFR §2.8 exhibits be w e date of the ation: ngineer n on ID: N7NA R isted below, c disclosure. 459 of the C tion Act. W ce DA 04-1 803 and the withheld fro Grant of Eq R7550 , submitted w . This reque Commission We cite trade 705 in ord e importation om public v quipment A with our app est is made u n’s Rules, an secrets as th er to comply n rules in 47 iewing for a Authorization plication fo under the nd Section he reason an y with the 7 CFR §2.12 a short limit n, due to the r nd 204, ted e

Sie 138 Ric Ca n Tel Fa x Dat M o FC IC: De v En c En c erra Wire 811 Wireless hmond, BC nada V6V 3A . +1 604 231 x. +1 604 231 te: April 8, odel # AR75 C ID: N7NA 2417C-AR vice Photos closure, Top closure, Bot eless Inc Way A4 1100 1 1109 2013 550 AR7550 R7550 s: p Surface ttom Surfac c., ce Disclosure:

Sie 138 Ric Ca n Tel Fa x Dat M o FC IC: La b erra Wire 811 Wireless hmond, BC nada V6V 3A . +1 604 231 x. +1 604 231 te: April 8, odel # AR75 C ID: N7NA 2417C-AR bel and loca eless Inc Way A4 1100 1 1109 2013 550 AR7550 R7550 ation: c.,

Sie 138 Ric Ca n Tel Fa x Dat M o FC IC: De v En c En c erra Wire 811 Wireless hmond, BC nada V6V 3A . +1 604 231 x. +1 604 231 te: April 8, odel # AR75 C ID: N7NA 2417C-AR vice Photos closure, Top closure, Bot eless Inc Way A4 1100 1 1109 2013 550 AR7550 R7550 s: p Surface ttom Surfac c., ce Disclosure:

MPE Evaluation for AR7550 Wireless Module May 6, 2013 1. Introduction In this application we seek for modular approval to the AR7550 wireless module for use in standalone and collocated simultaneous transmission under mobile configuration. This Maximum Permissive Exposure (MPE) report demonstrates compliance analysis for AR7550 wireless module with FCC CFR 47 §2.1091 and IC RSS-102 for standalone and collocated transmission in mobile exposure conditions. The MPE analysis is limited for US / Canada bands only. The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Any collocated transmitter must have a valid FCC ID documenting equivalent or degraded RF characteristics with the collocated parameters defined in this MPE report. A separation distance of 20cm or more shall be maintained between the end user and each WWAN, WiMAX or WLAN, and Bluetooth transmitting antenna. Portable user conditions or additional collocated transmitters not allowed based on this RF exposure analysis require a Class II permissive change and updated RF exposure report. 2. RF Exposure Limits and Equations FCC RULES: According to FCC OET Bulletin 65 Supplement C, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1307. Table 1 : Limits for Maximum Permissible Exposure (MPE) IC RULES: IC has adopted the RF field strength limits established in Health Canada’s RF exposure guideline. The limits are shown in Table 2 below per RSS 102. Table 2 : RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Environment) EQUATIONS: Power density is given by : S = EIRP /(4 * Pi* D^2) where S = Power density (mW/cm^2) EIRP = Equivalent Isotropic Radiated Power (mW) D = Separation distance (cm) 3. Product Declarations The AR7550 wireless module can be installed for use in any mobile host as long as the antenna gain of the host antenna does not exceed the gain listed in table 3. This MPE analysis is applicable to any collocated transmitters with transmit power: -less than or equal to 29.0dBm for WLAN/WiMAX; and -less than or equal to 15.0dBm for BT. Specific FCC IDs for those devices are not necessary or identified in this analysis providing they are classified as mobile transmitters. A 100% duty cycle is used for calculations to present a worse-case analysis when applicable. Table 3: AR7550 Standalone and Collocated Transmission Declarations Mode Equipment Category Max Transmitter Duty Cycle Transmitter Range (MHz) Maximum Conducted Power Maximum Antenna Gain (dBi) (dBm) (W) Standalone Collocated CDMA EvDo 100% 824‐849 25.0 0.32 6.5 3.0 1850‐1910 25.0 0.32 3.0 3.0 UMTS HSDPA HSUPA 100% 824 ‐849 24.5 0.25 6.5 3.0 1850 ‐1910 24.5 0.25 3.0 3.0 LTE Band 13 100% 777 ‐787 24.0 0.25 9.0 6.0 Band 7 2500‐2570 24.0 0.25 9.0 9.0 Band 4 1710 ‐1755 24.0 0.25 6.0 6.0 4. MPE Calculations The WWAN MPE calculations are based on conservative conducted transmit power exceeding those listed in the FCC ID N7NAR7550 and IC number 2417C-AR7550 filing. The higher transmit power levels are used to present a worst case assessment. The WiMAX, WLAN, and BT transmit power and antenna gain parameters represent a maximum transmit power for a given frequency band. Integration of either a WiMAX or WLAN, and BT module that exceeds the parameters requires a new FCC authorization or permissive change application. A maximum antenna gain of 5 dBi for WLAN/WiMAX/BT has been assumed for all collocated antennas. Table 4, 5, and 6 summarize transmitter parameters associated with this analysis. 4.1.Individual Transmitter Calculations 4.1.1. Maximum Output Power The maximum power calculations for AR7550 per wireless technology are shown in Table 4 Technology Frequency (MHz) Maximum Conducted Power (dBm) Maximum Conducted Power (W) Maximum Antenna Gain (dBi) Duty Cycle Max EIRP (dBm) Max EIRP (W) Max ERP (dBm) Max ERP (W) Max output power limit AR7550 module(Standalone) CDMA BC0 824‐849 25.0 0.32 6.5 1.000 31.500 1.413 29.360 0.863 7 W ERP CDMA BC1 1850‐1910 25.0 0.32 3.0 1.000 28.000 0.631 25.860 0.385 2 W EIRP UMTS 824 ‐849 24.5 0.25 6.5 1.000 31.000 1.258 28.860 0.769 7 W ERP UMTS 1850 ‐1910 24.5 0.25 3.0 1.000 27.500 0.562 25.360 0.344 2 W EIRP LTE 777 ‐787 24.0 0.25 9.0 1.000 33.000 1.995 30.860 1.219 3 W ERP LTE 2500‐2570 24.0 0.25 9.0 1.000 33.000 1.995 30.860 1.219 2 W EIRP LTE 1710 ‐1755 24.0 0.25 6.0 1.000 30.000 1.000 27.860 0.611 1 W EIRP Table 4: AR7550 Maximum Output Power Calculation 4.1.2. Standalone Power Density The power density calculations for the individual transmitters per wireless technology at an exposure minimum separation distance of 20cm are shown in Table 5. For frequency dependent limit, the lowest transmitter frequency was used to represent the lowest MPE limit in this analysis (eg. 824MHz = 0.549mW/cm 2 ) Technology Frequency (MHz) Maximum Conducted Power (dBm) Maximum Conducted Power (W) Maximum Antenna Gain (dBi) Duty Cycle Average EIRP (dBm) Average EIRP (mW) Power Density @ 20cm (mW/cm^2) FCC MPE Limit (mW/cm^2) AR7550 module(Standalone) CDMA BC0 824‐849 25.0 0.32 6.5 1.000 31.50 1412.538 0.281 0.549 CDMA BC1 1850‐1910 25.0 0.32 3.0 1.000 28.00 630.957 0.126 1.000 UMTS 824 ‐849 24.5 0.25 6.5 1.000 31.00 1258.93 0.250 0.549 UMTS 1850 ‐1910 24.5 0.25 3.0 1.000 27.50 562.341 0.112 1.000 LTE 777 ‐787 24.0 0.25 9.0 1.000 33.00 1995.262 0.397 0.518 LTE 2500‐2570 24.0 0.25 9.0 1.000 33.00 1995.262 0.397 1.000 LTE 1710 ‐1755 24.0 0.25 6.0 1.000 30.00 1000.000 0.199 1.000 Table 5: AR7550 Standalone MPE Calculation 4.2. Collocated MPE Calculation The WiMAX, WLAN, and BT power levels listed represent the worse-case scenario for corresponding frequency ranges given. Technology Frequency (…

Text truncated - open the document above for the full version.

FCC 47 CFR PART 22H and 24E Test Report Product Type ： Wireless Module Applicant ： Sierra Wireless Inc., Address ： 13811 Wireless Way Richmond, British Columbia, Canada, V6V 3A4. Trade Name ： AirPrime Model Number ： AirPrime AR7550 Test Specification ： FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 CANADA RSS-132 ISSUE 3: Jan. 2013 CANADA RSS-133 ISSUE 6: Jan. 2013 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Application Purpose ： Original Receive Date ： Feb. 20, 2013 Test Period ： Mar. 08 ~ Mar. 15, 2013 Issue Date ： Mar. 21, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1303FR16 1 of 107 Revision History Rev. Issue Date Revisions Revised By 00 Mar. 21, 2013Initial Issue A Test Lab Techno Corp. Report Number: 1303FR16 2 of 107 Verification of Compliance Issued Date: 03/21/2012 Product Type : Wireless Module Applicant : Sierra Wireless Inc., Address : 13811 Wireless Way Richmond, British Columbia, Canada, V6V 3A4. Trade Name : AirPrime Model Number : AirPrime AR7550 FCC ID : N7NAR7550 IC : 2417C-AR7550 EUT Rated Voltage : DC 3.7V Test Voltage : 120 Vac / 60 Hz Applicable Standard : FCC 47 CFR PART 22H: Oct, 2012 FCC 47 CFR PART 24E: Oct, 2012 CANADA RSS-132 ISSUE 3: Jan. 2013 CANADA RSS-133 ISSUE 6: Jan. 2013 Canada RSS-Gen ISSUE 3: Dec., 2010 ANSI/TIA-603-C-2004 Application Purpose : Original Test Result : Complied Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 22H, Part 24E. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) A Test Lab Techno Corp. Report Number: 1303FR16 3 of 107 TABLE OF CONTENTS 1 General Information ....................................................................................................................................... 6 1.1. EUT Description ..................................................................................................................................... 6 1.2. Mode of Operation.................................................................................................................................. 7 1.3. EUT Exercise Software.......................................................................................................................... 7 1.4. Configuration of Test System Details ..................................................................................................... 7 1.5. Test Site Environment ............................................................................................................................ 8 1.6. Summary of Test Result ......................................................................................................................... 8 2 RF Output Power Test ................................................................................................................................... 9 2.1. Limit ........................................................................................................................................................ 9 2.2. Test Instruments ..................................................................................................................................... 9 2.3. Test Setup............................................................................................................................................... 9 2.4. Test Procedure ....................................................................................................................................... 9 2.5. Uncertainty ............................................................................................................................................. 9 2.6. Test Result............................................................................................................................................ 10 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test .................................................. 13 3.1. Limit ...................................................................................................................................................... 13 3.2. Test Instruments ................................................................................................................................... 13 3.3. Setup .................................................................................................................................................... 13 3.4. Test Procedure ..................................................................................................................................... 15 3.5. Uncertainty ........................................................................................................................................... 15 3.6. Test Result.........…

Text truncated - open the document above for the full version.

A Test Lab Techno Corp. Report Number: 1303FR19-02 1 of 176 FCC 47 CFR PART 27 Product Type ： Wireless Module Applicant ： Sierra Wireless Inc., Address ： 13811 Wireless Way Richmond, British Columbia, Canada, V6V 3A4. Trade Name ： AirPrime Model Number ： AirPrime AR7550 Test Specification ： FCC 47 CFR PART 27: Oct. 2012 CANADA RSS-139 Issue 2 CANADA RSS-199 Issue 1 ANSI C63.4: 2009 ANSI/TIA-603-C-2004 Application Purpose ： Original Receive Date ： Feb. 20, 2013 Test Period ： Mar. 08 ~ Apr. 27, 2013 Issue Date ： May 09, 2013 Issue by A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 Note: This report shall not be reproduced except in full, without the written approval of A Test Lab Techno Corp. This document may be altered or revised by A Test Lab Techno Corp. personnel only, and shall be noted in the revision section of the document. The client should not use it to claim product endorsement by TAF, or any government agencies. The test results in the report only apply to the tested sample. A Test Lab Techno Corp. Report Number: 1303FR19-02 2 of 176 Revision History Rev. Issue Date Revisions Revised By 00 Mar. 21, 2013 Initial Issue 01 May 02, 2013 Add LTE band 7 test results. Joyce Liao 02 May 09, 2013 Revised report information. Joyce Liao A Test Lab Techno Corp. Report Number: 1303FR19-02 3 of 176 Verification of Compliance Issued Date: 05/09/2013 Product Type : Wireless Module Applicant : Sierra Wireless Inc., Address : 13811 Wireless Way Richmond, British Columbia, Canada, V6V 3A4. Trade Name : AirPrime Model Number : AirPrime AR7550 FCC ID : N7NAR7550 IC : 2417C-AR7550 EUT Rated Voltage : DC 3.7V Test Voltage : 120 Vac / 60 Hz Applicable Standard : FCC 47 CFR PART 27: Oct. 2012 CANADA RSS-139 Issue 2 CANADA RSS-199 Issue 1 ANSI C63.4: 2009 ANSI/TIA-603-C-2004 Test Result : Complied Application Purpose : Original Performing Lab. : A Test Lab Techno Corp. No. 140-1, Changan Street, Bade City, Taoyuan County 334, Taiwan R.O.C. Te l：+886-3-2710188 / Fax：+886-3-2710190 T aiwan Accreditation Foundation accreditation number: 1330 http://www.atl-lab.com.tw/e-index.htm The above equipment was tested by A Test Lab Techno Corp. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2009 and the energy emitted by the sample tested as described in this report is in compliance with the requirements of FCC Rules Part 27L. The test results of this report relate only to the tested sample identified in this report. Approved By ： Reviewed By ： (Manager) (Murphy Wang) (Testing Engineer) (Fly Lu) TABLE OF CONTENTS 1 General Information................................................................................................................................. 6 1.1. EUT Description .................................................................................................................................. 6 1.2. Mode of Operation............................................................................................................................... 8 1.3. EUT Exercise Software..................................................................................................................... 11 1.4. Configuration of Test System Details ................................................................................................ 11 1.5. Test Site Environment ....................................................................................................................... 11 1.6. Summary of Test Result .................................................................................................................... 12 2 Conducted Output Average Power Test.............................................................................................. 14 2.1. Limit ................................................................................................................................................... 14 2.2. Test Instruments ................................................................................................................................ 14 2.3. Test Setup.......................................................................................................................................... 14 2.4. Test Procedure .................................................................................................................................. 14 2.5. Uncertainty ........................................................................................................................................ 14 2.6. Test Result......................................................................................................................................... 15 3 Effective Radiated Power / Equivalent Isotropic Radiated Power Test............................................ 26 3.1. Limit ................................................................................................................................................... 26 3.2. Test Instruments ................................................................................................................................ 26 3.3. Test Setup.......................................................................................................................................... 26 3.4. Test Procedure .................................................................................................................................. 28 3.5. Uncertainty ........................................................................................................................................ 28 3.6. Test Result......................................................................................................................................... 29 4 Frequency Stability …

Text truncated - open the document above for the full version.

LTE Band 7 (Channel Bandwidth: 5 MHz) _ 1RB Allocated Lower Band Edge Higher Band Edge A Test Lab Techno Corp. Report Number: 1303FR19-02 88 of 176 LTE Band 7 (Channel Bandwidth: 10 MHz) _ 1RB Allocated Lower Band Edge Higher Band Edge A Test Lab Techno Corp. Report Number: 1303FR19-02 89 of 176 LTE Band 7 (Channel Bandwidth: 15 MHz) _ 1RB Allocated Lower Band Edge Higher Band Edge A Test Lab Techno Corp. Report Number: 1303FR19-02 90 of 176 LTE Band 7 (Channel Bandwidth: 20 MHz) _ 1RB Allocated Lower Band Edge Higher Band Edge A Test Lab Techno Corp. Report Number: 1303FR19-02 91 of 176 Spectrum Analyzer Universal Radio Com. Tester EUT Attenuator Power divider 8 Conducted Spurious Emission Test 8.1. Limit The power of any emission outside a licensee's frequency block shall be attenuated below the transmitter power (P) by at least 43 +10 log 10 (P) dB. The limit of emission equal to -13dBm 8.2. Test Instruments Equipment Manufacturer Model No. Serial No. Cal. Date Remark Spectrum Analyzer Agilent E4445A MY46181986 05/10/2012 (1) Wideband Radio Communication Test R & S CMW500 103168 11/30/2012 (1) Attenuator RADIALL R41572000 0603033073 N.C.R. ----- Power divider Agilent 87302C 3239A00760 N.C.R. ----- Test Site ATL TE02 TE02 N.C.R. ----- Remark: (1) Calibration period 1 year. (2) Calibration period 2 years. Note: N.C.R. = No Calibration Request. 8.3. Setup Below 2.8GHz A Test Lab Techno Corp. Report Number: 1303FR19-02 92 of 176 Spectrum Analyzer Universal Radio Com. Tester EUT High Pass Filter Power divider Above 2.8GHz 8.4. Test Procedure a. The EUT was set up for the maximum peak power with LTE / WCDMA link data modulation. The power was measured with R&S Spectrum Analyzer. All measurements were done at 3 channels (low, middle and high operational frequency range.). b. The conducted spurious emission used the power splitter via EUT RF power connector between simulation base station and spectrum analyzer. c. When the spectrum scanned from 30MHz to 3GHz, it shall be connected to the band reject filter attenuated the carried frequency. The spectrum set RB=1MHz, VB=1MHz. d. When the spectrum scanned from 3GHz …

Text truncated - open the document above for the full version.