Technical Specifications
| # | Rule Parts | Frequency Range | Power Output | Emission | Tolerance |
|---|
| 15 | 27 | 2.50 GHz - 2.69 GHz | 206.00 mW | 16M4F9W | 2.5
ppm |
Modular TypeSingle Modular ApprovalConfidentialityLong Term Grant NotesSingle Modular Approval.
Power listed is conducted. This device is certified for mobile and fixed applications. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures or as shown in this filing. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed a maximum gain of 4.5 dBi in the 850 MHz cellular band, 1.0 dBi in the 1900 MHz PCS band, 5.0 dBi in LTE Band 4, 1.0 dBi in LTE Band 25, 4.5 dBi in LTE Band 26 and 7.0 dBi in LTE Band 41, as shown in this filing.
OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end­ users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.
This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 bandwidth modes for LTE Band 4 and LTE Band 25.
This device supports 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26.
This device supports 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 41.
The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module in all configurations utilized or contemplated, remains with the Grantee.
