N7NEM7455Radio Module

AirPrime EM7455 Hardware Integration Guide 4117682 Rev 1 Proprietary and Confidential Contents subject to change Preface Rev 1 Jul.15Proprietary and Confidential - Contents subject to change3 Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator's control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. Hardware Integration Guide 4Proprietary and Confidential - Contents subject to change4117682 PatentsThis product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM ® . This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from InterDigital Group and MMP Portfolio Licensing. Copyright©2015 Sierra Wireless. All rights reserved. TrademarksSierra Wireless ® , AirPrime ® , Skylight™, and the Sierra Wireless logo are registered trademarks of Sierra Wireless. Windows ® is a registered trademark of Microsoft Corporation. QUALCOMM ® is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of their respective owners. Contact Information Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases: www.sierrawireless.com Revision History Sales Desk:Phone:1-604-232-1488 Hours:8:00 AM to 5:00 PM Pacific Time E-mail:[email protected] Post:Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Technical support:[email protected] RMA support:[email protected] Fax:1-604-231-1109 Web:www.sierrawireless.com Revision number Release dateChanges 1July 2015FCC / IC Certification Rev 1 Jul.15Proprietary and Confidential - Contents subject to change5 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Required Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Module Power States . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 RF Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 RF Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Shielding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Antenna and Cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ground Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Interference and Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .…

Text truncated - open the document above for the full version.

Modular Approval Checklist FCC ID: N7NEM7455 Item Requirements EUT 1 The radio elements must have the radio frequency circuitry shielded Module RADIO elements are shielded. Please see submitted external photograph exhibits 2 The module must have buffered modulation/data inputs Module chipset design incorporates integrated buffer circuitry 3 The module must contain power supply regulation on the module Module chipset incorporates voltage regulation to transceiver circuitry 4 The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s) No applicable to licensed modules 5 The module must demonstrate compliance in a stand-alone configuration EUT conformance testing was performed in a standalone configuration 6 The licensed module must have a FCC ID label on the module itself. That FCC ID label must be visible through a window on the final device or it must be visible when an access panel, door or cover is easily removed. If not, a second label must be placed on the outside of the final device that contains the following text: Contains “FCC ID: N7NEM7455” Please refer to FCC ID label format. Labeling instruction has been provided in the user manual exhibit(s). 7 The module must comply with all specific rules applicable to the transmitter. The grantee must provide comprehensive instructions to explain compliance requirements The Module is compliant with all applicable FCC rules. Compliance requirements are stated in the user manual exhibit(s). 8 The module must comply with RF exposure requirements Compliance with RF exposure requirements is addressed in RF exposure report

July 10, 2015 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Re: Confidentiality Request for FCC ID: N7NEM7455 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules and KDB 726920 D01 Confidentiality Request Procedures Detail, we hereby request that the exhibits listed below, submitted with our application for certification, be withheld from public disclosure.  Schematics  Block Diagram  Operation Description  Tune Up Procedure The above exhibits contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, we request the following exhibits be withheld from public viewing for a short limited time of 180 days from the date of the Grant of Equipment Authorization, due to the sensitive business information:  User Manual  Internal Photos  External Photos  Test Setup Photos Best Regards, Ying Wang Manager, Regulatory Compliance

Model: EM7455 FCC ID: N7NEM7455 IC: 2417C-EM7455

MPE Evaluation for EM7455 Radio Module July 8, 2015 1. Introduction In this application we seek modular approval for the EM7455 radio module for use in standalone and collocated simultaneous transmission under mobile configuration. This Maximum Permissive Exposure (MPE) report demonstrates compliance analysis for EM7455 radio module with FCC CFR 47 §2.1091 and IC RSS-102 for standalone and collocated transmission in mobile exposure conditions. The MPE analysis is limited for US / Canada bands only. The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. Any collocated transmitter must have a valid FCC ID documenting equivalent or degraded RF characteristics with the collocated parameters defined in this MPE report. A separation distance of 20cm or more shall be maintained between the end user and each WWAN, WiMAX or WLAN, and Bluetooth transmitting antenna. Portable user conditions or additional collocated transmitters not allowed based on this RF exposure analysis require a Class II permissive change and updated RF exposure report. 2. RF Exposure Limits and Equations FCC Limits: According to FCC OET Bulletin 65 Supplement C, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1307. Table 1 : Limits for Maximum Permissible Exposure (MPE) IC Limits: IC has adopted the RF field strength limits established in Health Canada’s RF exposure guideline. The limits are shown in Table 2 below per RSS- 102. Table 2 : RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Environment) In the frequency range of 300-6000 MHz, the IC limits are more stringent than the FCC limits. The MPE evaluation in this report will be based on the IC limits, so the deduced output power and antenna gain limits will guarantee compliance with both FCC and IC requirements. EQUATIONS: EIRP (dBm) = Conducted Power (dBm) + Antenna Gain (dBi) Power density is given by : S = EIRP / (4 π * D^2) where S = Power density (mW/cm^2) EIRP = Equivalent Isotropic Radiated Power (mW) D = Separation distance (cm) 3. Stand-Alone Transmission When EM7455 module transmits as a stand-alone mobile device, the source- based time-averaged EIRP is calculated by summing up conducted power and antenna gain. A 100% duty cycle is used for calculations to present a worse-case analysis. The antenna gains are chosen so that the resulted radiated power levels are within the limits specified by the FCC rules and IC Radio Standards Specifications (RSS). The IC exemption limits for routine RF exposure evaluation are calculated using the lowest frequency of the operating band presenting the most stringent limits. As shown in Table 2 below, the resulted EIRP are always below the IC exemption limits for all the operating modes. Operating Mode TX Freq Range (MHz) Max Time-Avg Cond Power (dBm) Max Time- Avg Cond Power (W) Max Ant Gain (dBi) Source- Based Time- Averaged Max EIRP (dBm) IC Exemption Limit (EIRP) (dBm) EIRP/ERP Limits WCDMA Band II LTE Band 2 1850 1910 24 0.25 6 30 33.50 2 W EIRP WCDMA Band IV LTE Band 4 1710 1755 24 0.25 6 30 33.27 1 W EIRP WCDMA Band V LTE Band 5 824 849 24 0.25 6 30 31.10 6.3 W ERP LTE Band 7 2500 2570 23 0.20 9 32 34.39 2 W EIRP LTE Band 12 699 716 24 0.25 6 30 30.61 3 W ERP LTE Band 13 777 787 24 0.25 6 30 30.93 3 W ERP LTE Band 25 1850 1915 24 0.25 6 30 33.50 2 W EIRP LTE Band 26 814 849 24 0.25 6 30 31.06 7 W ERP LTE Band 30 2305 2315 23 0.20 1 24 34.15 0.25 W EIRP LTE Band 41 2496 2690 23 0.20 9 32 34.39 2 W EIRP Table 2: EM7455 Stand-Alone Transmission 4. Collocated Transmission When EM7455 module co-transmits with radio transmitter(s) as a mobile device, per KDB 447498 D01, simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. The evaluation here considers a WiMAX or WLAN transmitter, and a Bluetooth transmitter as collocated transmitters. Their radiated output power levels are listed in Table 3 below. The MPE ratio is defined by the ratio of power density to MPE limit. The sum of the MPE ratios is calculated as follows: ∑푀푃퐸 푅푎푡푖표 = Max (EM7455 MPE ratio) + Max (WLAN/WiMax MPE ratio) + BT MPE Ratio = 0.864+0.121+0.012=0.997 < 1.0 Operating Mode TX Freq Range (MHz) Max Time- Avg Cond Power (dBm) Max Time- Avg Cond Power (W) Max Ant Gain (dBi) Source- Based Time- Averaged Max EIRP Power Density @20 cm (W/m^2) IC MPE Limit (W/m2) IC PwrDensity MPE Ratio WCDMA Band II LTE Band 2 1850 1910 24 0.25 6 30 1.99 4.48 0.444 WCDMA Band IV LTE Band 4 1710 1755 24 0.25 6 30 1.99 4.24 0.469 WCDMA Band V LTE Band 5 824 849 24 0.25 6 30 1.99 2.58 0.772 LTE Band 7 2500 2570 23 0.20 9 32 3.15 5.50 0.573 LTE Band 12 699 716 24 0.25 6 30 1.99 2.30 0.864 LTE Band 13 777 787 24 0.25 6 30 1.99 2.47 0.804 LTE Band 25 1850 1915 24 0.25 6 30 1.99 4.48 0.444 LTE Band 26 814 849 24 0.25 6 30 1.99 2.55 0.779 LTE Band 30 2305 2315 23 0.20 1 32 0.50 5.20 0.096 LTE Band 41 2496 2690 23 0.20 9 32 3.15 5.49 0.574 WLAN 2.4 GHz 2400 2500 25 0.63 5.35 0.118 WLAN 5 GHz 5150 5850 27 1.00 9.01 0.111 WiMAX 2300 2400 25 0.63 5.19 0.121 2500 2700 25 0.63 5.50 0.114 3300 3800 25 0.63 6.65 0.095 BT 2400 2500 15 0.06 5.35 0.012 Table 3: EM7455 Collocated Transmission 5. Conclusion The analysis presented in this report concludes that the EM7455 radio module, when transmitting either in standalone or simultaneously with other co-located radio transmitters within a host device, is compliant with the FCC/IC RF exposure requirements in mobile exposure condition, provided the conducted power and a…

Text truncated - open the document above for the full version.

China Telecommunication Technology Labs. ® TEST REPORT REPORT NUMBER: B15W50341-FCC-RF_Rev1 ON Type of Equipment: Wireless Modules Type of Designation: EM7455 Manufacturer: Sierra Wireless Inc. ACCORDING TO FCC CFR Part 2, FREQUENCY ALLOCATIONS AND RADIO TREATY MATTERS; GENERAL RULES AND REGULATIONS; e-CFR, Mar 17, 2015 PART 22, PUBLIC MOBILE SERVICES , e-CFR, Mar 17, 2015 PART 24, PERSONAL COMMUNICATIONS SERVICES, e-CFR, Mar 17, 2015 PART 27,MISCELLANEOUS WIRELESS COMMUNICATIONS SERVICES,e-CFR, Aug. 15, 2014 PART 90,PRIVATE LAND MOBILE RADIO SERVICES，e-CFR, Jan. 26, 2012 RSS-Gen — General Requirements for Compliance of Radio Apparatus.，November 13, 2014 RSS-130 Mobile Broadband Services (MBS) Equipment Operating in the Frequency Bands 698-756 MHz and 777-787 MHz, October 2013 RSS-132 — Cellular Telephone Systems Operating in the Bands 824-849 MHz and 869-894 MHz, Issue 3, January 2013 RSS-133 — 2 GHz Personal Communications Services, Issue 6, January 2013 RSS-139 — Advanced Wireless Services (AWS) Equipment Operating in the Bands 1710-1780 MHz and 2110-2180 MHz, Issue 2, February 2009 RSS-199 Broadband Radio Service (BRS) Equipment Operating in the Band 2500-2690 MHz, Issue 2, October 2014 China Telecommunication Technology Labs. Month date, year Jul, 10, 2015 Signature He Guili Director FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF_Rev1 Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 2 of 409 China Telecommunication Technology Labs. ® FCC ID: N7NEM7455 IC: 2417C-EM7455 Report Date: 2015-07-10 Test Firm Name: Chongqing Institute of Telecommunications FCC Registration Number: 428018 IC Registration Number: 11590A Statement The measurements shown in this report were made in accordance with the procedures described on test pages. All reported tests were carried out on a sample equipment to demonstrate compliance with FCC CFR 47 Parts 2, 22, 24, 27, 90 and RSS-Gen, 130, 132, 133, 139 and 199. The sample tested was found to comply with the requirements defined in the applied rules. FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF_Rev1 Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 3 of 409 China Telecommunication Technology Labs. ® CONTENTS 1 GENERAL INFORMATION ................................................................ 4 1.1 NOTES ......................................................................................... 4 1.2 TESTERS ....................................................................................... 5 1.3 TESTING LABORATORY INFORMATION ...................................................... 6 1.4 DETAILS OF APPLICANT OR MANUFACTURER ............................................... 7 2 TEST ITEM ...................................................................................... 7 2.1 GENERAL INFORMATION ..................................................................... 7 2.2 OUTLINE OF EUT ............................................................................. 8 2.3 MODIFICATIONS INCORPORATED IN EUT .................................................. 9 2.4 EQUIPMENT CONFIGURATION ............................................................... 9 2.5 OTHER INFORMATION ........................................................................ 9 3 SUMMARY OF TEST RESULTS ........................................................ 10 4 TEST RESULTS .............................................................................. 12 4.1 RF POWER OUTPUT ......................................................................... 12 4.2 OCCUPIED BANDWIDTH ..................................................................... 48 4.3 CONDUCTED SPURIOUS EMISSION ........................................................ 94 4.4 RADIATED SPURIOUS EMISSION ......................................................... 155 4.5 BAND EDGE ................................................................................ 192 4.6 FREQUENCY STABILITY OVER TEMPERATURE VARIATION .............................. 389 4.7 FREQUENCY STABILITY OVER VOLTAGE VARIATION .................................... 392 4.8 PEAK TO AVERAGE RATIO ................................................................ 395 ANNEX A PHOTOS OF EM7455 ....................................................... 409 ANNEX B PHOTOS OF DEVELOPMENT BOARD ................................. 409 ANNEX C DEVIATIONS FROM PRESCRIBED TEST METHODS ............ 409 FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF_Rev1 Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 4 of 409 China Telecommunication Technology Labs. ® 1 General Information 1.1 Notes All reported tests were carried out on a sample equipment to demonstrate limited compliance with FCC CFR 47 Parts 2, 22, 24, 27, 90 and RSS-Gen,130, 132, 133, 139, 199. The test results of this test report relate exclusively to the item(s) tested as specified in section 2. The following deviation from, additions to, or exclusions from the test specifications have been made. See Annex C. China Telecommunication Technology Labs. (CTTL) authorizes the applicant or manufacturer (see section 1.4) to reproduce this report provided, and the test report may only be reproduced or published in full. Reproduction or publication of extracts from the report requires the prior written approval of CTTL Mr. He Guili. Any use which a third party makes of this report, or any reliance on or decisions to be made based on it, are the responsibility of such third parties. CTTL accepts no responsibility …

Text truncated - open the document above for the full version.

FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 155 of 409 China Telecommunication Technology Labs. ® 4.4 Radiated Spurious Emission Specifications: FCC Part 2.1051,24.238,2.1053,22.917, 27.53, 90.691 RSS-130 4.6, RSS-132 4.5, RSS-133 6.5, RSS-199 4.6 Date of Tests 2015-06-29-2015-06-30 Test conditions: Ambient Temperature:15°C-35°C Relative Humidity:30%-60% Air pressure: 86-106kPa Test Results: Pass Limit Level Construction: Out of band emissions, the power of any emission outside of the authorized operating frequency ranges must be attenuated below the transmitting power (P) by a factor of at least 43 + 10 log (P) dB, so the limit level is: P(dBm) – (43 + 10 log(P)) dB= -13dBm Test Setup: The EUT was placed in an anechoic chamber. The Wireless Communications Test Set was used to set the TX channel and power level and modulate the TX signal with different bit patterns. Test Method: The measurement method is substitution method accordance with section 2.2.12 of ANSI/TIA-603-C: Land Mobile FM or PM Communications Equipment Measurement and Performance Standards. (a) Connect the equipment as illustrated and measure the spurious emissions as the method as above. (b) Reconnect the equipment as illustrated. FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 156 of 409 China Telecommunication Technology Labs. ® (c) Remove the transmitter and replace it with a substitution antenna. The center of the substitution antenna should be approximately at the same location as the center of the transmitter. (d) Feed the substitution antenna at the transmitter end with a signal generator connected to the antenna by means of a non-radiating cable. With the antennas at both ends horizontally polarized, and with the signal generator tuned to a particular spurious frequency, raise and lower the test antenna to obtain a maximum reading at the spectrum analyzer. Adjust the level of the signal generator output until the previously recorded maximum reading for this set of conditions is obtained. This should be done carefully repeating the adjustment of the test antenna and generator output. (e) Repeat step d) with both antennas vertically polarized for each spurious frequency. (f) Calculate power in dBm into a reference ideal half-wave dipole antenna by reducing the readings obtained in steps d) and e) by the power loss in the cable between the generator and the antenna, and further corrected for the gain of the substitution antenna used relative to an ideal half-wave dipole antenna by the following formula: P d (dBm) = P g (dBm) – cable loss (dB) + antenna gain (dB) where: P d is the dipole equivalent power and P g is the generator output power into the substitution antenna. FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 157 of 409 China Telecommunication Technology Labs. ® 4.4.1 LTE B4 Radiated Spurious Emission Results Test Data （1.4MHz bandwidth QPSK Mode） Frequency [MHz] Generator output power(P g ) [dBm] Cable loss [dB] Antenna Gain [dB] Spurious Emission Power (P d ) [dBm] Antenna Polarization [H/V] 3465.00 -32.30 6.90 12.60 -38.00 V 5197.50 -37.64 5.80 12.70 -44.54 V 6930.00 -41.47 0.90 11.70 -52.27 V 8662.50 -40.89 1.10 11.90 -51.69 V 10395.00 -41.11 0.80 12.10 -52.41 V 3465.00 -32.53 6.90 12.60 -38.23 H 5197.50 -37.36 5.80 12.70 -44.26 H 6930.00 -40.19 0.90 11.70 -50.99 H 8662.50 -40.99 1.10 11.90 -51.79 H 10395.00 -41.23 0.80 12.10 -52.53 H Test Data （1.4MHz bandwidth 16QAM Mode） Frequency [MHz] Generator output power(P g ) [dBm] Cable loss [dB] Antenna Gain [dB] Spurious Emission Power (P d ) [dBm] Antenna Polarization [H/V] 3465.00 -32.32 6.90 12.60 -38.02 V 5197.50 -37.78 5.80 12.70 -44.68 V 6930.00 -41.23 0.90 11.70 -52.03 V 8662.50 -40.97 1.10 11.90 -51.77 V 10395.00 -41.46 0.80 12.10 -52.76 V 3465.00 -32.21 6.90 12.60 -37.91 H 5197.50 -37.43 5.80 12.70 -44.33 H 6930.00 -40.23 0.90 11.70 -51.03 H 8662.50 -40.67 1.10 11.90 -51.47 H 10395.00 -41.56 0.80 12.10 -52.86 H FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 158 of 409 China Telecommunication Technology Labs. ® Test Data （3MHz bandwidth QPSK Mode） Frequency [MHz] Generator output power(P g ) [dBm] Cable loss [dB] Antenna Gain [dB] Spurious Emission Power (P d ) [dBm] Antenna Polarization [H/V] 3465.00 -32.47 6.90 12.60 -38.17 V 5197.50 -37.88 5.80 12.70 -44.78 V 6930.00 -40.38 0.90 11.70 -51.18 V 8662.50 -40.45 1.10 11.90 -51.25 V 10395.00 -40.76 0.80 12.10 -52.06 V 3465.00 -32.47 6.90 12.60 -38.17 H 5197.50 -37.84 5.80 12.70 -44.74 H 6930.00 -40.16 0.90 11.70 -50.96 H 8662.50 -39.76 1.10 11.90 -50.56 H 10395.00 -41.47 0.80 12.10 -52.77 H Test Data （3MHz bandwidth 16QAM Mode） Frequency [MHz] Generator output power(P g ) [dBm] Cable loss [dB] Antenna Gain [dB] Spurious Emission Power (P d ) [dBm] Antenna Polarization [H/V] 3465.00 -32.03 6.90 12.60 -37.73 V 5197.50 -37.91 5.80 12.70 -44.81 V 6930.00 -40.24 0.90 11.70 -51.04 V 8662.50 -39.76 1.10 11.90 -50.56 V 10395.00 -40.73 0.80 12.10 -52.03 V 3465.00 -32.98 6.90 12.60 -38.68 H 5197.50 -37.77 5.80 12.70 -44.67 H 6930.00 -40.33 0.90 11.70 -51.13 H 8662.50 -41.02 1.10 11.90 -51.82 H 10395.00 -40.53 0.80 12…

Text truncated - open the document above for the full version.

FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 302 of 409 China Telecommunication Technology Labs. ® 4.5.6 LTE B26 Band Edge Results Graphical results： 1.4MHz bandwidth,QPSK,(1,0) Mode , below 814MHz Att 35 dB** A PS Ref 33.1 dBm Offset 3.6 dB LVL * * 3DB RBW 20 kHz VBW 100 kHz SWT 125 ms* AC Center814 MHzSpan1.4 MHz140 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -22.22 dBm 814.000000000 MHz D1 -13 dBm Date: 25.JUN.2015 11:53:20 Ref 33 dBm Offset 3.6 dB A LVL PS Att 35 dB** Center814 MHzSpan1 MHz100 kHz/ * * 3DB RBW 30 kHz VBW 100 kHz SWT 125 ms* DC *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -28.21 dBm 813.737179487 MHz 2 Marker 2 [T1 ] -20.40 dBm 813.956730769 MHz 3 Marker 3 [T1 ] -19.17 dBm 814.000000000 MHz bandedge Date: 9.JUL.2015 15:57:21 FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 303 of 409 China Telecommunication Technology Labs. ® 1.4MHz bandwidth,QPSK,(6,0) Mode , below 814MHz Att 35 dB** A PS Ref 33.1 dBm Offset 3.6 dB LVL * * 3DB RBW 20 kHz VBW 100 kHz SWT 125 ms* AC Center814 MHzSpan1.4 MHz140 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -33.13 dBm 814.000000000 MHz D1 -13 dBm Date: 25.JUN.2015 11:54:16 Ref 33 dBm Offset 3.6 dB A LVL PS Att 35 dB** Center814 MHzSpan1 MHz100 kHz/ * * 3DB RBW 30 kHz VBW 100 kHz SWT 125 ms* DC *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -34.53 dBm 813.663461538 MHz 2 Marker 2 [T1 ] -32.75 dBm 813.921474359 MHz 3 Marker 3 [T1 ] -32.85 dBm 814.000000000 MHz bandedge Date: 9.JUL.2015 15:58:19 FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment: EM7455 REPORT NO.: B15W50341-FCC-RF Address：No.8, Yuma Road, Chayuan New City, Nan’an District, Chongqing, P. R. China,401336 Tel:+ (+86)-023-88068315 FAX: (+86)-023-88608777Web:http://www.chinattl.com Page 304 of 409 China Telecommunication Technology Labs. ® 1.4MHz bandwidth, QPSK,(1,6) Mode, Above 849MHz Att 35 dB** A PS Ref 33.1 dBm Offset 3.6 dB LVL * * 3DB RBW 20 kHz VBW 100 kHz SWT 125 ms* AC Center849 MHzSpan1.4 MHz140 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -25.22 dBm 849.006730769 MHz D1 -13 dBm Date: 25.JUN.2015 11:57:09 1.4MHz bandwidth, QPSK,(6,0) Mode, Above 849MHz Att 35 dB** A PS Ref 33.1 dBm Offset 3.6 dB LVL * * 3DB RBW 20 kHz VBW 100 kHz SWT 125 ms* AC Center849 MHzSpan1.4 MHz140 kHz/ *1 RM MAXH -60 -50 -40 -30 -20 -10 0 10 20 30 1 Marker 1 [T1 ] -35.83 dBm 849.031410256 MHz D1 -13 dBm Date: 25.JUN.2015 11:57:54 FCC Parts 2, 22, 24,27,90 RSS-Gen, 130, 132,133,139, 199 Equipment:…

Text truncated - open the document above for the full version.