N7NEM76Wireless Module

Hardware Integration Guide 41114263 Rev 1 June 18, 2021 Proprietary and Confidential Contents subject to change AirPrime EM7690 AirPrime EM7690 Hardware Integration Guide 41114263 Rev 1 June 18, 2021 2 Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where cellular modems are not advised without proper device certifications. These areas include environments where cellular radio can interfere such as explosive atmospheres, medical equipment, or any other equipment which may be susceptible to any form of radio interference. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitations of Liability This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or noninfringement. The recipient of the manual shall endorse all risks arising from its use. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. AirPrime EM7690 Hardware Integration Guide 41114263 Rev 1 June 18, 2021 3 Patents This product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM ® . This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from MMP Portfolio Licensing. Copyright © 2021 Sierra Wireless. All rights reserved. Trademarks Sierra Wireless ® , AirPrime ® , AirLink ® , AirVantage ® , WISMO ® , ALEOS ® and the Sierra Wireless and Open AT logos are registered trademarks of Sierra Wireless, Inc. or one of its subsidiaries. Watcher ® is a registered trademark of NETGEAR, Inc., used under license. Windows ® and Windows Vista ® are registered trademarks of Microsoft Corporation. Macintosh ® and Mac OS X ® are registered trademarks of Apple Inc., registered in the U.S. and other countries. QUALCOMM ® is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of their respective owners. Contact Information Sales information and technical support, including warranty and returns Web: sierrawireless.com/company/contact-us/ Global toll-free number: 1-877-687-7795 6:00 am to 5:00 pm PST Corporate and product information Web: sierrawireless.com Document History Version Date Updates 1 June 18, 2021 Document created AirPrime EM7690 Hardware Integration Guide 41114263 Rev 1 June 18, 2021 4 Contents 1. INTRODUCTION .................................................................................................. 5 1.1. Accessories ......................................................................................................................... 5 1.2. Required Connectors ........................................................................................................... 5 2. POWER ................................................................................................................ 6 2.1. Power Supply....................................................................................................................... 6 2.2. Module Power States .......................................................................................................... 6 2.2.1. Power State Transitions ............................................................................................. 7 3. RF SPECIFICATIONS .......................................................................…

Text truncated - open the document above for the full version.

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 053019-02a Request for Modular/Limited Modular Approval Date: September 21, 2020 Subject: Manufacturer’s Declaration for ☒ - Modular Approval ☐ - Split Modular Approval ☐ - Limited Modular Approval ☐ - Limited Split Modular Approval Confidentiality Request for: __N7NEM76 8 Basic Requirements – FCC Part 15.212(a)(1) For Items Marked “NO(*)”, the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) ☒ - YES ☐ - NO(*) Details: Module RADIO elements are shielded. Please see submitted external photograph exhibits. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) ☒ - YES ☐ - NO(*) Details: Module chipset design incorporates integrated buffer circuitry. 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii) ☒ - YES ☐ - NO(*) Details: Module chipset incorporates voltage regulation to transceiver circuitry. 4. The modular transmitter must comply with the antenna and transmission system requirements of §§ 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a ‘‘unique’’ antenna coupler (at all connections between the module and the antenna, including the cable). The ‘‘professional installation’’ provision of § 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) ☐ - YES ☒ - NO(*) Details: No applicable to licensed modules. 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) ☒ - YES ☐ - NO(*) Details: EUT conformance testing was performed in a standalone configuration. THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 053019-02a Modular Approval Requirement Requirement Met 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display (see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: XYZMODEL1” or “Contains FCC ID: XYZMODEL1.” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains FCC certified transmitter module(s).” Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) ☒ - YES ☐ - NO(*) Details: Please refer to FCC ID label format. Labeling instruction has been provided in the user manual exhibit(s). 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is …

Text truncated - open the document above for the full version.

October 13, 2020 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Authorization Letter for FCC ID: N7NEM76 Dear Sir/Madam: I hereby authorize Ms. Suzi Lan of Sierra Wireless to act on my behalf in all manners relating to the application for equipment authorization under FCC ID: N7NEM76， including signing of all documents relating to these matters. Any and all acts carried out by Ms. Suzi Lan of Sierra Wireless on my behalf shall have the same effect as acts of my own. Sincerely, Ying Wang Senior Manager, Regulatory Compliance

Date: September 21, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Re: Confidentiality Request for FCC ID: N7NEM76 We hereby request that the exhibits listed below, submitted with our application for certification, be withheld from public disclosure. This request is made under the provisions of Section 0.457(d) and 0.459 of the Commission’s Rules, and Section 522(b)(4) of the Freedom of Information Act. We cite trade secrets as the reason and purpose of the request. • Schematics • Block Diagram • Operation Description • Tune Up Procedure Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, we request the following exhibits be withheld from public viewing for a short limited time of 180 days from the date of the Grant of Equipment Authorization, due to the sensitive business information: • Integration Manual • Product Photos • Test Setup Photos Best Regards, Suzi Lan Sr. Certification Engineer

September 17, 2021 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Ref: Test Data Reuse from FCC ID: N7NEM91 (Granted 06/23/2020) To Whom It May Concern: EM7690 (FCC ID: N7NEM76) is a variant of EM9190 (FCC ID: N7NEM91) with 5G NR components removed. This change does not affect the performance of the non-5G NR bands. The EM7690 verification report also confirms that the conducted power and the spurious emission levels at antenna terminal are very similar between the two products. Sierra Wireless hereby applies to reuse the test data from FCC ID: N7NEM91 for all the frequency bands supported by EM7690. The test data to be leveraged from EM9190 include the following: Occupied Bandwidth, Equivalent Isotropic Radiated Power, Conducted Band Edge Emissions, Frequency Stability Versus Temperature, Frequency Stability Versus Temperature, and the test results demonstrating compliance with § 96.47. Sincerely, Ying Wang Sr. Manager, Regulatory Compliance

Sierra Wireless Inc., 13811 Wireless Way Richmond, BC Canada V6V 3A4 Tel. +1 604 231 1100 Fax. +1 604 231 1109 Date: September 21, 2020 Model # EM7690 FCC ID: N7NEM76 Device Photos: Enclosure, Top Surface Enclosure, Bottom Surface

Sierra Wireless Inc., 13811 Wireless Way Richmond, BC Canada V6V 3A4 Tel. +1 604 231 1100 Fax. +1 604 231 1109 Date: September 25, 2020 Model # EM7690 FCC ID: N7EM76 Label and location: EM 7690 SIERRA WIRELESS EM7690 FCC ID: N7NEM76

Sierra Wireless Inc., 13811 Wireless Way Richmond, BC Canada V6V 3A4 Tel. +1 604 231 1100 Fax. +1 604 231 1109 Date: September 21, 2020 Model # EM7690 FCC ID: N7NEM76 Device Photos: Disclosure:

Sporton International (Shenzhen) Inc. Page Number : 1 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 RF Exposure Evaluation Report APPLICANT : Sierra Wireless, Inc. EQUIPMENT : Wireless Module BRAND NAME : AirPrime MODEL NAME : EM7690 FCC ID : N7NEM76 STANDARD : 47 CFR Part 2.1091 FCC KDB 447498 D01 v06 We, Sporton International (ShenZhen) Inc., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091 and FCC KDB 447498 D01 v06, and pass the limit. Without written approval of Sporton International (ShenZhen) Inc., the test report shall not be reproduced except in full. Reviewed by: Long Liang / Supervisor Approved by: Johnny Chen / Manager Sporton International (ShenZhen) Inc. 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China Sporton International (Shenzhen) Inc. Page Number : 2 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Standalone Power Density Calculation ............................................................................................. 8 5.2. Collocated Power Density Calculation ............................................................................................... 9 Sporton International (Shenzhen) Inc. Page Number : 3 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA021501-03 Rev. 01 Initial issue of report. Sep. 16, 2020 FA021501-03 Rev. 02 Updated antenna gain value for LTE band42/48. Jan. 26, 2021 Sporton International (Shenzhen) Inc. Page Number : 4 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 1. Administration Data 1.1. Testing Laboratory Sporton International (Shenzhen) Inc. is accredited to ISO/IEC 17025:2017 by American Association for Laboratory Accreditation with Certificate Number 5145.01. Testing Laboratory Test Firm Sporton International (Shenzhen) Inc. Test Site Location 1/F, 2/F, Bldg 5, Shiling Industrial Zone, Xinwei Village, Xili, Nanshan, Shenzhen, 518055 People’s Republic of China TEL: +86-755-86379589 FAX: +86-755-86379595 Test Site No. FCC Designation No. FCC Test Firm Registration No. CN1256 421272 Applicant Company Name Sierra Wireless, Inc. Address 13811 Wireless Way, Richmond, BC, Canada V6A 3A4 Manufacturer Company Name Sierra Wireless, Inc. Address 13811 Wireless Way, Richmond, BC, Canada V6A 3A4 Sporton International (Shenzhen) Inc. Page Number : 5 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type Wireless Module Brand Name AirPrime Model Name EM7690 IMEI 351735110001030 FCC ID N7NEM76 Wireless Technology and Frequency Range WCDMA Band II: 1852.4 MHz ~ 1907.6 MHz WCDMA Band IV: 1712.4 MHz ~ 1752.6 MHz WCDMA Band V: 826.4 MHz ~ 846.6 MHz LTE Band 2: 1850.7 MHz ~ 1909.3 MHz LTE Band 4: 1710.7 MHz ~ 1754.3 MHz LTE Band 5: 824.7 MHz ~ 848.3 MHz LTE Band 7: 2502.5 MHz ~ 2567.5MHz LTE Band 12: 699.7 MHz ~ 715.3 MHz LTE Band 13: 779.5 MHz ~ 784.5 MHz LTE Band 14: 790.5 MHz ~ 795.5 MHz LTE Band 17: 706.5 MHz ~ 713.5 MHz LTE Band 25: 1850.7 MHz ~ 1914.3 MHz LTE Band 26: 814.7 MHz ~ 848.3 MHz LTE Band 30: 2307.5 MHz ~ 2312.5 MHz LTE Band 38: 2572.5 MHz ~ 2617.5 MHz LTE Band 41: 2498.5 MHz ~ 2687.5 MHz LTE Band 42: 3552.5 MHz ~ 3597.5 MHz LTE Band 48: 3552.5 MHz ~ 3697.5 MHz LTE Band 66: 1710.7 MHz ~ 1779.3 MHz LTE Band 71: 665.5 MHz ~695.5 MHz Mode RMC 12.2Kbps HSDPA HSUPA DC-HSDPA HSPA+ (16QAM uplink is not supported) LTE: QPSK, 16QAM, 64QAM, 256QAM HW Version 1.0 SW Version SWIX55C_00.16.04.00 EUT Stage Identical Prototype Remark: 1. The above EUT's information was declared by manufacturer. Please refer to the specifications or user's manual for more detailed description. 2. LTE band 42 covered by LTE band 48 with the same power level, so only chose LTE band 48 to perform standalone power density calculation. 3. This device supports HPUE for LTE band 41 with class 2 power level, so HPUE has been performed standalone power density calculation. Comments and Explanations: The declared of product specification for EUT presented in the report are provided by the manufacturer, and the manufacturer takes all the responsibilities for the accuracy of product specification. Sporton International (Shenzhen) Inc. Page Number : 6 of 11 TEL : +86-755-86379589 Report Issued Date : Jan. 26, 2021 FAX : +86-755-86379595 Report Version : Rev. 02 FCC ID : N7NEM76 RF Exposure Evaluation Report Report No. : FA021501-03 3. Maximum RF average output power amo…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : 1 of 16 FAX : 886-3-328-4978 Issued Date : Oct. 19, 2020 Report Template No.: BU5-FGLTE96 Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FG021429-03A FCC RADIO TEST REPORT FCC ID : N7NEM76 Equipment : Wireless Module Brand Name : AirPrime Model Name : EM7690 Applicant : Sierra Wireless, Inc. 13811 Wireless Way, Richmond, BC, Canada V6A 3A4 Manufacturer : Sierra Wireless, Inc. 13811 Wireless Way, Richmond, BC, Canada V6A 3A4 Standard : FCC 47 CFR Part 2, 96 The product was received on Jul. 17, 2020 and testing was started from Jul. 17, 2020 and completed on Sep. 10, 2020. We, SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, would like to declare that the tested sample has been evaluated in accordance with the test procedures given in ANSI / TIA-603-E and has been in compliance with the applicable technical standards. The test results in this variant report apply exclusively to the tested model / sample. Without written approval of SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory, the test report shall not be reproduced except in full. Approved by: Louis Wu SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory No. 52, Huaya 1st Rd., Guishan Dist., Taoyuan City, Taiwan (R.O.C.) TEL : 886-3-327-3456 Page Number : 2 of 16 FAX : 886-3-328-4978 Issued Date : Oct. 19, 2020 Report Template No.: BU5-FGLTE96 Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FG021429-03A Table of Contents History of this test report ................................................................................................................................. 3 Summary of Test Result................................................................................................................................... 4 1 General Description ................................................................................................................................... 5 1.1 Product Feature of Equipment Under Test ....................................................................................... 5 1.2 Modification of EUT ........................................................................................................................... 5 1.3 Testing Location ................................................................................................................................ 5 1.4 Applied Standards ............................................................................................................................. 6 2 Test Configuration of Equipment Under Test ......................................................................................... 7 2.1 Test Mode.......................................................................................................................................... 7 2.2 Connection Diagram of Test System ................................................................................................ 7 2.3 Support Unit used in test configuration ............................................................................................. 8 2.4 Frequency List of Low/Middle/High Channels ................................................................................... 8 3 Conducted Test Items ................................................................................................................................ 9 3.1 Measuring Instruments ...................................................................................................................... 9 3.2 Test Setup ......................................................................................................................................... 9 3.3 Test Result of Conducted Test .......................................................................................................... 9 3.4 Conducted Output Power ................................................................................................................ 10 3.5 EIRP ................................................................................................................................................ 11 4 Radiated Test Items ................................................................................................................................. 12 4.1 Measuring Instruments .................................................................................................................... 12 4.2 Test Setup ....................................................................................................................................... 12 4.3 Test Result of Radiated Test ........................................................................................................... 13 4.4 Radiated Spurious Emission ........................................................................................................... 14 5 List of Measuring Equipment .................................................................................................................. 15 6 Uncertainty of Evaluation ........................................................................................................................ 16 Appendix A. Test Results of Conducted Test Appendix B. Test Results of EIRP and Radiated Test Appendix C. Original Report TEL : 886-3-327-3456 Page Number : 3 of 16 FAX : 886-3-328-4978 Issued Date : Oct. 19, 2020 Report Template No.: BU5-FGLTE96 Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FG021429-03A History of this test report Report No. Version Description Issued Date FG021429-03A 01 Initial issue of report Sep. 17, 2020 FG021429-03A 02 Remove conducted band edge and conducted spurious emission test results Oct. 19, 2020 TEL : 886-3-327-3456 Page Number : 4 of 16 FAX : 886-3-328-4978 Issued Date : Oct. 19, 2020 Report Template No.: BU5-FGLTE96 Version 2.4 Report Version : 02 FCC RADIO TEST REPORT Report No. : FG021429-03A Summary of Test R…

Text truncated - open the document above for the full version.

TEL : 886-3-327-3456 Page Number : A41-29 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 20MHz 16QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-30 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 5MHz 64QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-31 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 5MHz 64QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-32 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 5MHz 64QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-33 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 10MHz 64QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-34 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 10MHz 64QAM MiddleChannel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-35 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 10MHz 64QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-36 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 15MHz 64QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-37 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 15MHz 64QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-38 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 15MHz 64QAM Highest Channel / 1RB0 Highest Channel / 1RBmax Highest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-39 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 20MHz 64QAM Lowest Channel / 1RB0 Lowest Channel / 1RBmax Lowest Channel / FullRB N/A TEL : 886-3-327-3456 Page Number : A41-40 of 168 FAX : 886-3-328-4978 FCC RADIO TEST REPORT Report No. : FG021429A LTE Band 48 / 20MHz 64QAM Middle Channel / 1RB0 Middle Channel / 1RBmax Middle Channel / FullRB N/A TEL : 886-3-327-3456 Pa…

Text truncated - open the document above for the full version.