N7NHL7802Module

AirPrime HL7802 Hardware Integration Guide 41113745 Rev. 1 AirPrime HL7802 Hardware Integration Guide Rev. 1 June 2020241113745 Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless product are used in a normal manner with a well-constructed network, the Sierra Wireless product should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless product, or for failure of the Sierra Wireless product to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless product in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless product MUST BE POWERED OFF. The Sierra Wireless product can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless product in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless product MUST BE POWERED OFF. When operating, the Sierra Wireless product can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless products may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless product while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitation of Liability The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. PatentsThis product may contain technology developed by or for Sierra Wireless Inc. This product includes technology licensed from QUALCOMM ® . This product is manufactured or sold by Sierra Wireless Inc. or its affiliates under one or more patents licensed from MMP Portfolio Licensing. Preface Rev. 1 June 2020341113745 Copyright© 2020 Sierra Wireless. All rights reserved. TrademarksSierra Wireless ® , AirPrime ® , AirLink ® , AirVantage ® and the Sierra Wireless logo are registered trademarks of Sierra Wireless. Windows ® is a registered trademark of Microsoft Corporation. Other trademarks are the property of their respective owners. Contact Information Revision History Sales information and technical support, including warranty and returns Web: sierrawireless.com/company/contact-us/ Global toll-free number: 1-877-687-7795 6:00 am to 5:00 pm PST Corporate and product informationWeb: sierrawireless.com Revision number Release dateChanges 1June 2020Creation Rev. 1 June 2020441113745 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Module Power Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 RF Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Supported Bands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Conducted Tx Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 General Design Recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Host Application Board PCB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ESD Guidlines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ESD Guidelines for USIM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 ESD Guidelines for USB (TBC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Regulatory Compliance and Industry Certifications . . . . . . . . . . . . . . . . . . . 12 Important Compliance Information for North American Users . . . . . . . …

Text truncated - open the document above for the full version.

FCB011_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: Feb. 06, 2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Agent letter for FCC ID: N7NHL7802 We, Sierra Wireless, Inc., 13811 Wireless Way, Richmond, BC, Canada V6V 3A4 Canada, hereby authorize DEKRA Testing and Certification Co., Ltd. No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 31061, Taiwan Mr. Louis Hsu, e-mail: [email protected] Phone: +886 3 592 8858 to act as our agent in the preparation of this application for equipment certification, including the signing of all documents relating to these matters. The present authorization considers the development of documents on behalf of the client, written under his own letterhead and related to the necessary information to be provided on his behalf to complete the certification process. We also hereby certify that neither we nor any party to this application are subject to a denial of U.S. Federal benefits, which include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, U.S.C. 862 because of conviction for possession or distribution of controlled substance. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification, S.A.U., still resides with us. This agreement expires one year from the current date. Sincerely, __________________________ By: DENIS CHABOT Title: Senior Manager Company: Sierra Wireless, Inc. Telephone: 85228245222 e-mail: [email protected]

September 7, 2016 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Authorization Letter for Grantee Code N7N Dear Sir/Madam: I hereby authorize Mr. Denis Chabot of Sierra Wireless to act on my behalf in all manners relating to the application for equipment authorization including signing of all documents relating to these matters. Any and all acts carried out by Mr. Denis Chabot of Sierra Wireless on my behalf shall have the same effect as acts of my own. Sincerely, Ying Wang Manager, Regulatory Compliance

FCB012_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: Feb. 06, 2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: Confidentiality request for FCC ID: N7NHL7802 To whom it may concern: Pursuant to §0.457(d)(1)(ii) and §0.459 of the Commission’s Rules (47 C.F.R.) and §552 (b)(4) of the Freedom of Information Act, Sierra Wireless, Inc. hereby request requests that a part of the subject FCC application be held confidential to avoid release of sensitive information of the product to the public. For the product stated above, we request that the following information be withheld from public disclose: Type of Confidentiality Requested Exhibit Short Term Permanent Block Diagrams Short Term External Photos Short Term Internal Photos Short Term Permanent Operation Description Short Term Permanent Parts List & Placement/BOM Short Term Permanent Tune-Up Procedure Short Term Permanent Schematics Short Term Test Setup Photos Short Term User’s Manual Permanent Confidentiality: The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to us and provide unjustified benefits to our competitors. Short-Term Confidentiality: We hereby request short-term confidentiality for the product stated above to avoid premature release of sensitive information prior to marketing or release of the product to the public. Release date of short term confidentiality is: 45 days from grant date marked 90 days from grant date marked 135 days from grant date marked 180 days from grant date marked Specific date: We are also aware that we are responsible to notify DEKRA in the event information regarding the product or the product is made available to the public. DEKRA will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, __________________________ By: DENIS CHABOT Title: Senior Manager Company: Sierra Wireless, Inc. Telephone: 85228245222 e-mail: [email protected]

FCB013_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless Date: Feb. 06, 2020 DEKRA Testing and Certification, S.A.U. Parque Tecnológico de Andalucía C/ Severo Ochoa 2 & 6 29590 Campanillas Málaga, España Ref: FCC Modular approval letter for FCC ID: N7NHL7802 To whom it may concern: The following attestation addresses the requirements to support modular approval pursuant to §15.212 of the Commission’s Rules: Modular approval requirement Yes No* (i) The radio elements of the modular transmitter must have their own shielding. The physical crystal and tuning capacitors may be located external to the shielded radio elements. X (ii) The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with part 15 requirements under conditions of excessive data rates or over-modulation. X (iii) The modular transmitter must have its own power supply regulation. X (iv) The modular transmitter must comply with the antenna and transmission system requirements of §§15.203, 15.204(b) and 15.204(c). The antenna must either be permanently attached or employ a “unique” antenna coupler (at all connections between the module and the antenna, including the cable). The “professional installation” provision of §15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. X (v) The modular transmitter must be tested in a stand- alone configuration, i.e., the module must not be inside another device during testing for compliance with part 15 requirements. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in §15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see §15.27(a)). The length of these lines shall be the length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified and commercially available (see §15.31(i)). X (vi) The modular transmitter must be equipped with either a permanently affixed label or must be capable of electronically displaying its FCC identification number. X The module size does not allow the affixing of the FCC on the label so it is placed on the packaging (vii) The modular transmitter must comply with any specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer X FCB013_02 //DEKRA Testing and Certification, S.A.U. // www.dekra-product-safety.com/wireless must provide adequate instructions along with the module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. (viii) The modular transmitter must comply with any applicable RF exposure requirements in its final configuration. X * Shall provide a detailed explanation if the answer is “No”. Sincerely, __________________________ By: DENIS CHABOT Title: Senior Manager Company: Sierra Wireless, Inc. Telephone: 85228245222 e-mail: [email protected]

Report No.: 19C0344R-HPUSP28V00 Page: 57 of 65 Attachment 2  EUT External Photograph (1) EUT Photo (2) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 58 of 65 (3) EUT Photo (4) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 59 of 65 (5) EUT Photo (6) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 60 of 65 (7) EUT Photo (Antenna) (8) EUT Photo (Antenna)

February 21, 2020 To Whom It May Concern, RE: Labelling of HL7802 Module The HL7802 module is a Surface Mount Device soldered onto the end product and is not possible for the end-user to replace or remove from the end product. In an effort to reduce the amount of paper/plastic/adhesive label consumption and be a good environmental corporate role model, Sierra Wireless uses laser etching instead of the traditional labels for the module. The laser etching process requires a “no etch” circular area in the centre of the module so that modules can be picked up by vacuum nozzles. The dimension of the module is shown in the drawing below. FCC ID: N7NHL7802 IC: 2417C-HL7802 Due to the small size of the product and the “no etch” area (marked grey) required for the laser etching process, it is not practical to mark the FCC Identifier and IC certification number in a font size of 4 points or larger. Pursuant to FCC Rule §2.925, the FCC Identifier will be placed in the user manual and on the device packaging. Sierra Wireless hereby seeks agreement from ISED to place the IC certification number in the user manual in accordance with Section 4 of RSS-Gen Issue 5. Sincerely, Denis Chabot Senior Manager, Certification

Title: 1RLCL RevDraftCheck DETAILS Date 12-Nov-19 HL7802 LASER ETCHING, STAGE 2 5305309REV 1 PAGE 1 OF 3 Notes Copyright (2016) THIS DOCUMENT, SUBMITTED IN CONFIDENCE, CONTAINS PROPRIETARY INFORMATION WHICH SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR MANUFACTURING OR ANY OTHER PURPOSE WITHOUT WRITTEN PERMISSION OF SIERRA WIRELESS, INC. Initial Release 14.45mm 17.40 mm Note that barcode representations are for reference only; relative lengths, widths and shapes of bars are to be printed in compliance with the barcode format called out in Table 1 on page 2 NOT TO SCALE, TYPICAL REPRESENTATION FIGURE 1 FIGURE 2 3 1 5 4 2 REF 1 2 3 4 5 Refer to Stage 1 spec Refer to Stage 1 spec Height (millimeters) Refer to Stage 1 spec Data Source (Static text in " ") Note (i) - For Product Name data source: If label belongs directly in a 11xxxxx SKU BOM, refer to the 'Description' field in the 'Cover Page' tab of this SKU in Agile, and print the text that comes before the first comma in that field OR if label belongs directly in a 12xxxxx PCA BOM, refer to the 'Description' field in the 'Cover Page' tab of this PCA assembly in Agile, and print the text that in between the first and second comma in that field. Static/ DynamicTypeSymbology Barcode[IMEI value assigned to the device] ["Sierra Wireless TM "] Comments Data Matrix4.00±0.5 Italicized items denote punctuation, spaces or line-breaks to be included as part of the data source Dynamic StaticArial Narrow1.0±0.2Text 5305309 REV 1.xlsx PAGE 2 OF 3 NOTES: a) Minimum X-dimensions for all barcodes are to be at least 0.127mm (5.0-mil) unless otherwise specified in the Comments column of each reference in Table 1. b)All 2D barcodes are to be encoded in Data Matrix (ECC 200) symbology. Minimum X-dimension for all 2D barcodes are to be 0.339mm (13.3mil). There must be an undisturbed white region on all foursides of each barcode, minimum 0.4mm on each side. c)For positioning of barcodes, and positioning of barcode human readables relative to the barcodes, refer to Figure 1 on page 1. d)For all text listed in Table 1: -If font style for an item is listed as "N/A", recommended font style is Arial, but factory may select any suitable font for that item. -If font style is specifically mentioned for a specific item, factory must print using the mentioned font style for the item. e)For all items that are Logo type, factory is to refer to Arena document 2102319 and use the corresponding logo found in that document. Factory must also respect the Aspect Ratio requirement of each logo. Maximum aspect ratio deviation of ±10% is allowed. PRINTING NOTES: I)Note that this is a base part print spec drawing. For label blank stock material and mechanical specifications refer to item on BOM with identical REF DES as this print spec drawing. II)Barcodes must meet print quality requirements as outlined in the “General Cosmetic Spec for SWI Products” document (Item #2140122). 5305309 REV 1.xlsx PAGE 3 OF 3

Report No.: 19C0344R-HPUSP28V00 Page: 61 of 65 Attachment 3  EUT Internal Photograph (1) EUT Photo (2) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 62 of 65 (3) EUT Photo (4) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 63 of 65 (5) EUT Photo (6) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 64 of 65 (7) EUT Photo (8) EUT Photo Report No.: 19C0344R-HPUSP28V00 Page: 65 of 65 (9) EUT Photo (10) EUT Photo

MPE Evaluation for HL7802 Radio Module May 20, 2020 Contents 1. Introduction..................................................................................................... 2 2. RF Exposure Limits and Equations ................................................................ 3 3. Stand-Alone Transmission ............................................................................. 5 4. Collocated Transmission ................................................................................ 7 5. Conclusion...................................................................................................... 8 1. Introduction In this application we seek modular approval for the HL7802 radio module for use in standalone and collocated simultaneous transmission under mobile and fixed configurations. This Maximum Permissive Exposure (MPE) report demonstrates compliance analysis for HL7802 radio module with FCC CFR 47 §2.1091 and IC RSS-102 for standalone and collocated transmission in the exposure conditions where a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. The MPE analysis is limited for US / Canada bands only. The general population/uncontrolled exposure limits are applicable to situations in which the general public may be exposed or in which persons who are exposed as a consequence of their employment may not be made fully aware of the potential for exposure or cannot exercise control over their exposure. 2. RF Exposure Limits and Equations FCC Limits: According to FCC OET Bulletin 65 Supplement C, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1307. Table 1 : Limits for Maximum Permissible Exposure (MPE) IC Limits: IC has adopted the RF field strength limits established in Health Canada’s RF exposure guideline. The limits are shown in Table 2 below per RSS- 102. Table 2 : RF Field Strength Limits for Devices Used by the General Public (Uncontrolled Environment) In the frequency range of 300-6000 MHz, the IC limits are more stringent than the FCC limits. The MPE evaluation in this report will be based on the IC limits, so the deduced output power and antenna gain limits will guarantee compliance with both FCC and IC requirements. EQUATIONS: EIRP (dBm) = Conducted Power (dBm) + Antenna Gain (dBi) Power density is given by : S = EIRP / (4 π * D^2) where S = Power density (mW/cm^2) EIRP = Equivalent Isotropic Radiated Power (mW) D = Separation distance (cm) 3. WP7702 Product Specifications WP7702 will transmit on only one band and mode of operation at any one time. Table 3 lists the supported frequency bands in Canada/USA and the maximum power in each of those bands. Operating Mode Operating Mode TX Freq Range (MHz) Max Time-Avg Cond Power (dBm) GPRS GPRS G850 824 849 33.5 GPRS G1900 1850 1910 30.5 LTE CAT-M1/NB1 LTE Band 2 1850 1910 24.5 LTE Band 4 1710 1755 24.5 LTE Band 5 824 849 24.5 LTE Band 12 699 716 24.5 LTE Band 13 777 787 24.5 LTE Band 25 1850 1915 24.5 LTE Band 26 814 849 24.5 LTE Band 66 1710 1780 24.5 Table 3: WP7702 Frequency Bands and Output Power 4. Stand-Alone Transmission When HL7802 module transmits as a stand-alone mobile device, the source- based time-averaged EIRP is calculated by summing up conducted power and antenna gain. A 100% duty cycle is used for calculations in LTE mode to present a worse-case analysis. The actual duty cycle is much smaller. The antenna gains are chosen so that the resulted radiated power levels are within the limits specified by the FCC rules and IC Radio Standards Specifications (RSS). The IC exemption limits for routine RF exposure evaluation are calculated using the lowest frequency of the operating band presenting the most stringent limits. As shown in Table 2 below, the resulted EIRP are always below the IC exemption limits for all the operating modes. Operating Mode TX Freq Range (MHz) Max Time- Avg Cond Power (dBm) Max Time- Avg Cond Power (W) Max Ant Gain (dBi) Duty Cycle Source- Based Time- Averaged Max EIRP (dBm) IC Exemption Limit (EIRP) (dBm) EIRP/ERP Limits G850-GMSK (2TS) 824 849 33.5 3 2.24 25% 30.48 31.10 7 W EIRP G1900-GMSK (2TS) 1850 1910 30.5 3 1.12 25% 27.48 33.50 2 W EIRP LTE Band 2 1850 1910 24.5 8 0.28 100% 32.5 33.50 2 W EIRP LTE Band 4 1710 1755 24.5 6 0.28 100% 30.5 33.27 1 W EIRP LTE Band 5 824 849 24.5 6 0.28 100% 30.5 31.10 7 W ERP LTE Band 12 699 716 24.5 6 0.28 100% 30.5 30.61 3 W ERP LTE Band 13 777 787 24.5 6 0.28 100% 30.5 30.93 3 W ERP LTE Band 25 1850 1915 24.5 6 0.28 100% 30.5 33.50 3 W ERP LTE Band 26 814 849 24.5 6 0.28 100% 30.5 31.06 7 W ERP LTE Band 66 1710 1780 24.5 6 0.28 100% 30.5 33.27 1 W ERP Table 2: HL7802 Stand-Alone Transmission 5. Collocated Transmission When HL7802 module co-transmits with radio transmitter(s) as a mobile device, per KDB 447498 D01, simultaneous transmission MPE test exclusion applies when the sum of the MPE ratios for all simultaneous transmitting antennas incorporated in a host device, based on the calculated/estimated, numerically modeled or measured field strengths or power density, is ≤ 1.0. The evaluation here considers a WLAN transmitter, a Bluetooth transmitter and a WiGig transmitter as collocated transmitters. Their radiated output power levels are listed in Table 3 below. The MPE ratio is defined by the ratio of power density to MPE limit. The sum of the MPE ratios is calculated as follows: ∑푀푃퐸 푅푎푡푖표 = Max (WP7610 MPE ratio) + Max (WLAN MPE ratio) + BT MPE Ratio + Max (WiGig MPE ratio) = 0.551+0.372+0.011+0.063=0.998 < 1.0 Operating Mode TX Freq Range (MHz) Max Time- Avg Cond Power (dBm) Max Time- Avg Cond Power (W) Max Ant Gain (dBi) Duty Cycle Source- Based Time- Averaged Max EIRP Power Density @20 cm (W/m^2) IC MPE Limit (W/m2) IC PwrDensity MPE Ratio G850-GMSK (2TS) 824 849 33.5 2.24 1 25% 28.48 1.40 2.58 0.544 G1900-GMSK (2TS) 1850 …

Text truncated - open the document above for the full version.

Report No.: 19C0344R-HPUSP28V00 Page: 1 of 65 FCC Part 22H&24E Test Report Product Name : Module Trade Name : AirPrime Model No. : HL7802 FCC ID : N7NHL7802 IC ID : 2417C-HL7802 Applicant : Sierra Wireless, Inc. Address : 13811 Wireless Way, Richmond, BC, Canada V6V 3A4 Canada Date of Receipt : Dec. 20, 2019 Issued Date : Feb. 24, 2020 Report No. : 19C0344R-HPUSP28V00 Report Version : V1.0 The test results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of DEKRA Testing and Certification Co., Ltd.. Report No.: 19C0344R-HPUSP28V00 Page: 2 of 65 Test Report Certification Issued Date : Feb. 24, 2020 Report No. : 19C0344R-HPUSP28V00 Product Name : Module Applicant : Sierra Wireless, Inc. Address : 13811 Wireless Way, Richmond, BC, Canada V6V 3A4 Canada Manufacturer : Sierra Wireless, Inc. Address : 13811 Wireless Way, Richmond, BC, Canada V6V 3A4 Canada Model No. : HL7802 FCC ID : N7NHL7802 IC ID : 2417C-HL7802 EUT Voltage : DC 3.7V Testing Voltage : DC 3.7V Trade name : AirPrime Applicable Standard : FCC CFR Title 47 Part 2, ANSI/TIA-603-D FCC Part 22 Subpart H, FCC Part 24 Subpart E Industry Canada RSS-132, Issue 3 Industry Canada RSS-133, Issue 6 RSS Gen Issue 4 Test Lab : Hsin Chu Laboratory Address : No.372-2, Sec. 4, Zhongxing Rd., Zhudong Township, Hsinchu County 310, Taiwan, R.O.C. TEL: +886-3-582-8001 / FAX: +886-3-582-8958 Test Result : Complied Documented By : ( Fonbo Fang / Engineering Adm. Specialist ) Tested By : ( Clemens Fang / Senior Engineer ) Approved By : ( Louis Hsu / Deputy Manager ) Report No.: 19C0344R-HPUSP28V00 Page: 3 of 65 Revision History Report No. Version Description Issued Date 19C0344R-HPUSP28V00 V1.0 Initial issue of report Feb. 24, 2020 Report No.: 19C0344R-HPUSP28V00 Page: 4 of 65 TABLE OF CONTENTS Description Page 1. General Information ............................................................................................................... 6 1.1. EUT Description ......................................................................................................... 6 1.2. Mode of Operation ..................................................................................................... 7 1.3. Tested System Details ................................................................................................ 8 1.4. Configuration of Tested System ................................................................................. 8 1.5. EUT Exercise Software .............................................................................................. 8 2. Technical Test ........................................................................................................................ 9 2.1. Summary of Test Result ............................................................................................. 9 2.2. Test Environment ....................................................................................................... 10 2.3. List of Test Equipment ................................................................................................ 11 2.4. Uncertainty ................................................................................................................. 14 3. RF Output Power ................................................................................................................... 15 3.1. Test Setup .................................................................................................................. 15 3.2. Test Procedure ........................................................................................................... 15 3.3. Test Method ................................................................................................................ 15 3.4. Test Result ................................................................................................................. 16 4. Occupied Bandwidth .............................................................................................................. 18 4.1. Test Setup .................................................................................................................. 18 4.2. Test Procedure ........................................................................................................... 18 4.3. Test Method ................................................................................................................ 18 4.4. Test Result ................................................................................................................. 19 5. Peak To Average Ratio .......................................................................................................... 25 5.1. Test Setup .................................................................................................................. 25 5.2. Test Procedure ........................................................................................................... 25 5.3. Test Method ................................................................................................................ 25 5.4. Test Result ...........…

Text truncated - open the document above for the full version.