N7NOEM2CDPD OEM Tranciever

Sierra Wireless SB300 Series OEM Modems User’s Guide 2110059 Rev B Preliminary December 1998 OEM Developer’s Toolkit Proprietary and Confidential User’s Guide 2110059 Rev B Preliminary98.12.10Page i Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless, Inc., accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE TURNED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE TURNED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Patents Portions of this product are covered by some or all of the following US patents: D367062, D372248, D372701, 5515013, 5617106, 5629960, 5682602, 5748449, and other patents pending. Copyright ©1998 Sierra Wireless, Inc. All rights reserved. Printed in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, without the prior permission of the publisher. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless, Inc. Sierra Wireless, Inc. shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use of this manual. The Watcher ™ and WirelessExpert ™ software described in this manual are copyright 1998 Sierra Wireless, Inc. All rights reserved. Trademarks Watcher ™ and WirelessExpert ™ are trademarks of Sierra Wireless, Inc. Windows ® and Microsoft ® are registered trademarks of Microsoft Corporation. Hayes ™ is a trademark of Hayes Microcomputer Products, Inc. All other brand or product names, logos, trademarks, etc. mentioned in this manual are owned by their respective companies. OEM Developer’s Toolkit Proprietary and Confidential User’s Guide Page ii98.12.102110059 Rev B Preliminary Regulatory Information The equipment certifications appropriate to your device are marked on the device and the accompanying product specific information. Where appropriate, the use of the equipment is subject to the following conditions: CAUTION Unauthorized modifications or changes not expressly approved by Sierra Wireless, Inc. could void compliance with regulatory rules, and thereby your authority to use this equipment. !! WARNING (EMI) - United States FCC Information This equipment has been tested and found to comply with the Class B limits pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an appropriate installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help !! WARNING (EMI) – Canada This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference causing equipment standard entitled 'Digital Apparatus', ICES-003 of the Department of Communications. Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la norme sur le matériel brouilleur: 'Appareils Numériques', NHB-003 édictée par le ministre des Communications. RSA Licensee If you have purchased this product under a United States Government contract, it shall be subject to restrictions as set forth in subparagraph (c)(1)(ii) of Defense Federal Acquisitions Regulations (DFARs) Section 252.227-7013 for Department of Defense contracts, and as set forth in Federal Acquisitions Regulations (FARs) Section 52.227-19 for civilian agency contracts or any successor regulations. If further government regulations apply, it is your responsibility to ensure compliance with such regulations. OEM Developer’s Toolkit Proprietary and Conf…

Text truncated - open the document above for the full version.

Sierra Wireless SB300 Series OEM Modems User’s Guide 2110059 Rev 1.1 March 1999 SB300 Series Modems User’s Guide 2110059 Rev 1.1Proprietary and ConfidentialPage i Important Notice Because of the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless, Inc., accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE TURNED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE TURNED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Patents Portions of this product are covered by some or all of the following US patents: D367062, D372248, D372701, 5515013, 5617106, 5629960, 5682602, 5748449, and other patents pending. Copyright ©1999 Sierra Wireless, Inc. All rights reserved. Printed in Canada. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, without the prior permission of the publisher. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless, Inc. Sierra Wireless, Inc. shall not be liable for incidental or consequential damages resulting from the furnishing, performance, or use of this manual. The Watcher ™ and WirelessExpert ™ software described in this manual are copyright 1998 Sierra Wireless, Inc. All rights reserved. Trademarks Watcher ™ and WirelessExpert ™ are trademarks of Sierra Wireless, Inc. Windows ® and Microsoft ® are registered trademarks of Microsoft Corporation. Hayes ™ is a trademark of Hayes Microcomputer Products, Inc. All other brand or product names, logos, trademarks, etc. mentioned in this manual are owned by their respective companies. SB300 Series Modems User’s Guide Page iiProprietary and Confidential2110059 Rev 1.1 Regulatory Information The equipment certifications appropriate to your device are marked on the device and the accompanying product specific information. Where appropriate, the use of the equipment is subject to the following conditions: CAUTION Unauthorized modifications or changes not expressly approved by Sierra Wireless, Inc. could void compliance with regulatory rules, and thereby your authority to use this equipment. !! WARNING (EMI) - United States FCC Information This equipment has been tested and found to comply with the Class B limits pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in an appropriate installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help !! WARNING – FCC RF Exposure Guidelines While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. This transmitter is only approved to operate with an antenna not exceeding 1.5 watts total system ERP (effective radiated power) for operations with the antenna located at more than 20 cm from all persons. The warning label must be displayed at the base of the antenna (if stand-alone) or attached to the final product (if the antenna is integral with the product), clearly visible to all persons exposed to the transmitter. For Final Product Regulatory Approvals in the USA To use the modems in the United States of America without additional FCC certifications you must: 1. Use an antenna providing a total system ERP (effective radiated power) not exceeding 1.5 watts for operations with the antenna located at more than 20 cm from all persons. If the system exceeds 1.5 watts ERP then separate submissions to the FCC are required. 2. Place a warning label on the antenna (if stand-alone) or…

Text truncated - open the document above for the full version.

APPLICATION FOR Type Acceptance BLOCK DIAGRAM Sierra Wireless Inc. FCC ID: N7NOEM2 MODEL: SB300 Prepared by: Sierra Wireless Inc. #150 - 13575 Commerce Parkway Richmond, B.C. V6V 2L1 Dec.7, 1998 SB300 Radio Block Diagram Figure 1. TAZ! Transceiver Block Diagram. RX TX ANT ALC LNA 1 st IF Filter 45 MHz 881- 894 MHz 450kHz IF Filter Splitter 926MHz ± 12.5MHz OSC OSCX3 Exciter 450kHz IF Filter π/4 DISC RSSI +3V Regulator RX3V Switch TX3V Switch RXON PREKEY +5V PLL 14.85 MHz TCXO X3 44.55MHz 824- 849 MHz MOD 50Ω 824MHz ± 12.5MHz 881MHz ± 12.5MHz 90MHz KEY PWRCTL CLK DAT /LE TNET

Dec 2, 1998 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Rd. Columbia, M.D. 21046 Dear sir/madam: Re: FCC ID N7NOEM2 and Request for Confidentiality We hereby request that the documentation listed below, submitted with our application for type acceptance, be withheld from public disclosure. This request is made under the provisions of Section 0.457(d) of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. We cite trade secrets as the reason and purpose of the request. 1. SB300 modem schematics (sb300_schematic.pdf) 2. SB300 detailed circuit description (sb300_dcd.pdf) Sincerely, Trent McKeen RF Engineer

Dec 2, 1998 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Rd. Columbia, M.D. 21046 Gentlemen: Sierra Wireless Incorporated has tested this transmitter in accordance with the requirements contained in the appropriate Commission Regulations. To the best of my knowledge, these tests were performed using measurement procedures consistent with the Industry or Commission standards and demonstrates that the equipment complies with the published standard. We are unable to warrant against unpublished changes in requirements. The applicable rules are listed in the following test report. The Open Area Test Site used for these measurements is located at Fluke Park, Mulkilteo, Washington. Site information required by Public Notice 24541 in accordance with ANSI C634-1992 was filed with the FCC Authorization and Evaluation Division Sampling and Measurements Branch in July 1994. Sincerely Trent McKeen RF Engineer

APPLICATION FOR Type Acceptance EXTERNAL PHOTOS Sierra Wireless Inc. FCC ID: N7NOEM2 MODEL: SB300 Prepared by: Sierra Wireless Inc. #150 - 13575 Commerce Parkway Richmond, B.C. V6V 2L1 Dec.7, 1998 Figure 1: Modem External View – Top Side Figure 2: Modem External View – Bottom Side

2100094Rev.2 SB300BottomLabel Thisdevicecomplieswithpart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference, and(2)thisdevicemustacceptanyinterference received,includinginterferencethatmaycause undesiredoperations. Whilethisdeviceisinoperation,aseparationdistance ofatleast20cmmustbemaintainedbetweenthe radiatingantennaandthebodyofallpersonsexposed bythetransmittertomeetFCCexposureguidelines. DesignedandManufacturedbySierraWirelessInc. ProductofCanada ModelNumber:SB300 Part#:1200032 FCCID:N7NOEM2

While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. While this device is in operation, a separation distance of at least 20cm must be maintained…

Text truncated - open the document above for the full version.

2100094Rev.2.1 SB300BottomLabel Thisdevicecomplieswithpart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: (1)Thisdevicemaynotcauseharmfulinterference, and(2)thisdevicemustacceptanyinterference received,includinginterferencethatmaycause undesiredoperations. WARNING! Whilethisdeviceisinoperation,aseparationdistance ofatleast20cmmustbemaintainedbetweenthe radiatingantennaandthebodyofallpersonsexposed bythetransmittertomeetFCCexposureguidelines. DesignedandManufacturedbySierraWirelessInc. ProductofCanada ModelNumber:SB300 Part#:1200032 FCCID:N7NOEM2

WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation distance of at least 20cm must be maintained between the radiating antenna and the body of all persons exposed by the transmitter to meet FCC exposure guidelines. WARNING! While this device is in operation, a separation dis…

Text truncated - open the document above for the full version.

APPLICATION FOR Type Acceptance INTERNAL PHOTOS Sierra Wireless Inc. FCC ID: N7NOEM2 MODEL: SB300 Prepared by: Sierra Wireless Inc. #150 - 13575 Commerce Parkway Richmond, B.C. V6V 2L1 Dec.7, 1998 Figure 1: Modem Internal View – Top Side of Logic Board Figure 2: Modem Internal View – Bottom Side of Logic Board Figure 3: Modem Internal View – Top Side of Radio Board Figure 3: Modem Internal View – Bottom Side of Radio Board

SB300 RADIO PART TYPEDESCRIPTIONVENDORVENDOR PNTOLREF-DESQTY 2N7002N-CHANNEL T-MOS FETMOTOROLA2N7002LT1Q3-42 85MMCX-50-0-1MMCX RIGHT ANGLE PCB JACKHUBER&SUHNER85 MMCX-50-0-1J11 ADS784112-BIT 4 CHANNEL SERIAL ADCBURR-BROWNADS7841EU171 BAV99DUAL DIODE SOT-23 PKGPHILIPSBAV99D31 C4021500515pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH150J5%C111 C4023300533pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH330J5%C94-952 C4024300543pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH430J5%C831 C603102101nF/50V 0603 SM CERAMIC CAPACITORTAIYO YUDENUMK107CH102KZ10%C31 C2061060Z10uF/10V 1206 SM CERAMIC CAPACITORTAIYO YUDENLMK316F106ZL80/-20%C87-882 C2062260Z22uF/10V 1206 SM CERAMIC CAPACITORTAIYO YUDENLMK316F226ZL80/-20%C26 C452 C40210105-A100pF/25V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH101J5%C24 C35 C41 C43 C46 C96-977 C40210220-A1nF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105B102M20%C1 C4-5 C7-8 C14 C23 C38 C58-61 C63 C68 C72-74 C7918 C40210320-A0.01uF/16V 0402 SM CERAMIC CAPACITORTAIYO YUDENEMK105B103M20%C15-16 C20 C25 C27 C33-34 C44 C48 C54 C67 C70-71 C78 C80-8217 C40212005-A12pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH120J5%C861 C40215A0C1.5pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CK1R5CW 0.25pFC6 C622 C40216105-A160pF/25V 0402 SM CERAMIC CAPACITORTAIYO YUDENTMK105SL161J5%C551 C40218005-A18pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH180J5%C191 C40220A0C-A2pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CK020C 0.25pFC21 C40222110-A220pF/25V 0402 SM CERAMIC CAPACITORTAIYO YUDENTMK105CH221K10%C22 C562 C40227005-A27pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH270J5%C17 C98-1004 C4023330Z-A33nF/16V 0402 SM CERAMIC CAPACITORTAIYO YUDENEMK105F333Z80/-20%C691 C40240A0C-A4pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH040C 0.25pFC52-53 C1023 C40262005-A62pF/50V 0402 SM CERAMIC CAPACITORTAIYO YUDENUMK105CH620J5%C49-513 C6031040Z-B0.1uF/25V 0603 SM CERAMIC CAPACITORTAIYO YUDENTMK107F104…

Text truncated - open the document above for the full version.