N7NQ2687GSM/GPRS/EDGE/AMR Module

WA_DEV_Q26RD_PTS_001 002 April 20, 2010 AirPrime Q2687 Refreshed Product Technical Specification and Customer Design Guideline WA_DEV_Q26RD_PTS_001 Rev 002 April 20, 2010 2 Product Technical Specification and Customer Design Guideline Important Notice Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e., have errors) or be totally lost. Although significant delays or losses of data are rare when wireless devices such as the Sierra Wireless modem are used in a normal manner with a well-constructed network, the Sierra Wireless modem should not be used in situations where failure to transmit or receive data could result in damage of any kind to the user or any other party, including but not limited to personal injury, death, or loss of property. Sierra Wireless accepts no responsibility for damages of any kind resulting from delays or errors in data transmitted or received using the Sierra Wireless modem, or for failure of the Sierra Wireless modem to transmit or receive such data. Safety and Hazards Do not operate the Sierra Wireless modem in areas where blasting is in progress, where explosive atmospheres may be present, near medical equipment, near life support equipment, or any equipment which may be susceptible to any form of radio interference. In such areas, the Sierra Wireless modem MUST BE POWERED OFF. The Sierra Wireless modem can transmit signals that could interfere with this equipment. Do not operate the Sierra Wireless modem in any aircraft, whether the aircraft is on the ground or in flight. In aircraft, the Sierra Wireless modem MUST BE POWERED OFF. When operating, the Sierra Wireless modem can transmit signals that could interfere with various onboard systems. Note: Some airlines may permit the use of cellular phones while the aircraft is on the ground and the door is open. Sierra Wireless modems may be used at this time. The driver or operator of any vehicle should not operate the Sierra Wireless modem while in control of a vehicle. Doing so will detract from the driver or operator’s control and operation of that vehicle. In some states and provinces, operating such communications devices while in control of a vehicle is an offence. Limitations of Liability This manual is provided “as is”. Sierra Wireless makes no warranties of any kind, either expressed or implied, including any implied warranties of merchantability, fitness for a particular purpose, or noninfringement. The recipient of the manual shall endorse all risks arising from its use. The information in this manual is subject to change without notice and does not represent a commitment on the part of Sierra Wireless. SIERRA WIRELESS AND ITS AFFILIATES SPECIFICALLY DISCLAIM LIABILITY FOR ANY AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR REVENUE OR ANTICIPATED PROFITS OR REVENUE ARISING OUT OF THE USE OR INABILITY TO USE ANY SIERRA WIRELESS PRODUCT, EVEN IF SIERRA WIRELESS AND/OR ITS AFFILIATES HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES OR THEY ARE FORESEEABLE OR FOR CLAIMS BY ANY THIRD PARTY. Notwithstanding the foregoing, in no event shall Sierra Wireless and/or its affiliates aggregate liability arising under or in connection with the Sierra Wireless product, regardless of the number of events, occurrences, or claims giving rise to liability, be in excess of the price paid by the purchaser for the Sierra Wireless product. WA_DEV_Q26RD_PTS_001 Rev 002 April 20, 2010 3 Product Technical Specification and Customer Design Guideline Patents Portions of this product may be covered by some or all of the following US patents: 5,515,013 5,629,960 5,845,216 5,847,553 5,878,234 5,890,057 5,929,815 6,169,884 6,191,741 6,199,168 6,339,405 6,359,591 6,400,336 6,516,204 6,561,851 6,643,501 6,653,979 6,697,030 6,785,830 6,845,249 6,847,830 6,876,697 6,879,585 6,886,049 6,968,171 6,985,757 7,023,878 7,053,843 7,106,569 7,145,267 7,200,512 7,295,171 7,287,162 D442,170 D459,303 D599,256 D560,911 and other patents pending. This product includes technology licensed from QUALCOMM ® 3G Manufactured or sold by Sierra Wireless or its licensees under one or more patents licensed from InterDigital Group. Copyright © 2010 Sierra Wireless. All rights reserved. Trademarks AirCard ® and Watcher ® are registered trademarks of Sierra Wireless. Sierra Wireless™, AirPrime™, AirLink™, AirVantage™ and the Sierra Wireless logo are trademarks of Sierra Wireless. , , ® , inSIM ® , WAVECOM ® , WISMO ® , Wireless Microprocessor ® , Wireless CPU ® , Open AT ® are filed or registered trademarks of Sierra Wireless S.A. in France and/or in other countries. Windows ® and Windows Vista ® are registered trademarks of Microsoft Corporation. Macintosh and Mac OS are registered trademarks of Apple Inc., registered in the U.S. and other countries. QUALCOMM ® is a registered trademark of QUALCOMM Incorporated. Used under license. Other trademarks are the property of the respective owners. Contact Information Sales Desk: Phone: 1-604-232-1488 Hours: 8:00 AM to 5:00 PM Pacific Time E-mail: [email protected] Post: Sierra Wireless 13811 Wireless Way Richmond, BC Canada V6V 3A4 Fax: 1-604-231-1109 Web: www.sierrawireless.com Consult our website for up-to-date product descriptions, documentation, application notes, firmware upgrades, troubleshooting tips, and press releases: www.sierrawireless.com WA_DEV_Q26RD_PTS_001 Rev 002 April 20, 2010 4 Product Technical Specification and Customer Design Guideline Document History Version Date Updates 001 January 28, 2010 Creation 002 April 20, 2010 Reformatted in the rebranded SWI template. In Section 3 Technical Specifications:  Moved the Power Supply Design Requirements to section 9.1 Power Supply  Updated Figure 5 In section 4 Interfaces:  Updated section 4.7.4 5-wire Serial Interface  Updated section 4.8.1 Pin Descri…

Text truncated - open the document above for the full version.

Sierra Wireless, Inc Date: March 23, 2010 Power of Attorney To whom it may concern, We, Sierra Wireless Inc, authorize CETECOM (Shanghai) Communication Testing Consulting Co., Ltd to act on our behalf for the application of the product FCC ID: N7NQ2687 and IC: 2417C-Q2687 to EMCC DR. RAŠEK GmbH Telecommunication Certification Body. Any and all acts carried out CETECOM (Shanghai) Communication Testing and Consulting Co., Ltd, on the matters of relating to all processes required in the FCC approval and IC approval, any communication needed with the national authority, shall have the same legal authority as acts on our own behalf. This authorization is limited to the product of as following: FCC ID: N7NQ2687 Any acknowledgement and response please send it to CETECOM (Shanghai) Communication Testing Consulting Co., Ltd directly. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely yours, Sierra Wireless Inc. Tel: +1-604-232-1440 Fax: +1-604-231-1109 E-Mail: [email protected]

Sierra Wireless Inc. Date: April 8, 2010 Request for Modular Approval FCC ID: N7NQ2687 / IC: 2417C-Q2687 Dear Sir/ Madam, Sierra Wireless Inc., AirPrime Q2687 GSM/ GPRS/EDGE module, FCC ID: N7N Q2687 and IC ID: 2417C-Q2687 would like to request for a modular approval. The requirements of Public Notice DA00- 1407 are shown on the following statements: Item Requirements EUT 1 The modular transmitter must have its own RF shielding. Yes, the EUT does provide a RF shielding. Refer to EUT picture. 2 The modular transmitter must have buffered modulation/data inputs. Yes, the EUT has buffered data input. Refer to the technical documents. 3 The modular transmitter must have its own power supply regulation. Yes, the EUT has its own power supply regulation. Refer to the technical documents. 4 The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. The EUT was tested in a stand-alone configuration via a test kit. Please see section photographs of test configuration in the test report. 5 The modular transmitter must be labeled with its own FCC ID number, and, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: "Contains Transmitter Module FCC ID: XYZMODEL1" or "Contains FCC ID: XYZMODEL1." Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. Please see label sample for the FCC ID and IC ID of this module. FCC ID: N7NQ2687. IC: 2417C-Q2687. 6 The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instructions along with the module to explain any such requirements. The EUT is compliant with all FCC rules. Details instructions of maintaining compliance are given in the user manual. 7 The modular transmitter must comply with any applicable RF exposure requirements. The EUT is compliant with RF exposure requirement MPE evaluation. The MPE report is addressed in the RF exposure exhibition.

Apr.19, 2010 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern: Re: Confidentiality Request for FCC ID: N7NQ2687 We hereby request that the exhibits listed below, submitted with our application for certification, be withheld from public disclosure. This request is made under the provisions of Section 0.457(d) and 0.459 of the Commission’s Rules, and Section 552(b)(4) of the Freedom of Information Act. We cite trade secrets as the reason and purpose of the request.  Schematics  Block Diagram  Operation Description  Tune Up Procedure/BOM Furthermore, pursuant to Public Notice DA 04-1705 in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, we request the following exhibits be withheld from public viewing for a short limited time of 180 days from the date of the Grant of Equipment Authorization, due to the sensitive business information:  User Guide  Product Photos  Test Setup Photos Best Regards Ying Wang Staff Regulatory Specialist

SGS-CSTC Standards Technical Services （ （（ （Shanghai） ）） ） Co., Ltd. APPENDIX 1 PHOTOGRAPHS OF EUT SGS-CSTC Standards Technical Services （ （（ （Shanghai） ）） ） Co., Ltd. Front View of EUT Back View of EUT

[WA_PGM_Q26RD_LBL_001] [Rev 01] [Date 12 March 2010] Q2687 Labeling Specification Sierra Wireless AirPrime [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 2 Q2687 Label Specification Overview Document History Version Date Updates 001 March 12 2010 Creation [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 3 Contents 1. OVERVIEW ............................................................................................................. 4 2. LABEL DIMENSIONS ............................................................................................ 5 2.1. Label Definition ............................................................................................................... 5 2.2. IMEI Label ....................................................................................................................... 6 2.3. Label Layout ................................................................................................................... 6 2.4. Serial Number definition .................................................................................................. 7 2.5. Logo ................................................................................................................................ 7 [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 4 Q2687 Label Specification Overview 1. Overview This document is the Sierra Wireless AirPrime Q2687 Label Specification. [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 5 2. Label Dimensions 2.1. Label Definition • Width W=29mm • Height H=20mm • Tolerances: o lcd, rcd = 1.5 mm ± 0.5mm, left/right clearance distance from the label edge o tcd,bcd = 0.75 mm ± 0.4mm,top/bottom clearance distance from the label edge tcd lcd rcd H W bcd [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 6 Sierra Wireless AirPrime Q2687 Label Specification 2.2. IMEI Label • Width W : 16,5 mm • Height H : 6,35 mm 2.3. Label Layout Serial No, Bar Code SWI P/N PNMKT: Marketing Product Reference FCC ID IC ID CPN IMEI number, 2D Bar code CE Marking Open AT® Logo [WA_PGM_Q26RD_LBL_001] Rev [Rev 01] [Date 12 March 2010] 7 Sierra Wireless AirPrime Q2687 Label Specification 2.4. Serial Number definition Barcode : Barcode type : EAN 128 code B Length : x mm Height : y mm White zone length before and after Barcode : 2 mm minimum Text font below : Arial 6 Digit number 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1516 17 Data t t y w w n n n n n b b h h h r r Part tt y ww nnnnn bb hhh rr Name of part Module Type Yea r Week Module week serial number Site Hard version traceabil ity Definition Specify the type of module Specify date of production Specify the number of modules during the week Specify the factory site Specify the number of the hard version Option Example AZ 0 06 001330 08 511 Module serial number (15 first digits) 2.5. Logo 2mmminimum 2mmminimum ttywwnnnnnbbhhhrr xmm ymmminimum

SGS-CSTC Standards Technical Services（ （（ （Shanghai） ）） ） Co., Ltd. APPENDIX 2 PHOTOGRAPHS OF EUT SGS-CSTC Standards Technical Services（ （（ （Shanghai） ）） ） Co., Ltd. Internal of EUT-1 Internal of EUT-2

Report No.: GSM10166004M02 Issue Date: 04-08,2010 Page 1 of 14 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/terms_and _conditions.htm. and, for electronic format documents to Terms and Conditions for Electronic Documents at www.sgs.com/terms e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained heron reflects the company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligation under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company.Any unauthorised alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 30 days only SHGSM SGS-CSTC Standards Technical Services(Shanghai) Co, Ltd.. 3 rd Building, No. 889, Yishan Road, Shanghai, China 200233 t (86 -21) 61402666*2736 f (86 -21) 54500149 www.cn.sgs.com Testing Center-GSM Laboratory 中国•上海•徐汇区宜山路889号3号楼 邮编: 200233 t (86 -21) 61402666*2736 f (86 -21) 54500149 e [email protected] Member of the SGS Group (Société Générale de Surveillance) Attention: To check the authenticity of testing / i nspection report & certific ate, pls. contact tel: (86 - 755)83071443 email:[email protected] MPE Evaluation Report Applicant Name: Sierra Wireless Inc Applicant Address: 13811 Wireless WayRichmond, British Columbia Canada, V6V 3A4 The following samples were submitted and identified on behalf of the client as: Sample Description Module SGS Ref GSM10166004M02 Model Number Airprime Q2687 FCC ID N7NQ2687 IC ID 2417C-Q2687 Final Hardware Version Tested 520 Final Software Version Tested Firmware 7.43 Date Initial Sample Received 03-15,2010 Testing Start Date 03-15,2010 Testing End Date 03-16,2010 According to: FCC Rules 47 CFR §2.1091,FCC OET Bulletin 65 supplement C FCC Rules 47 CFR §22.913, FCC Rules 47 CFR §24.232 Radio Standards Specification 102 (RSS-102) Comments/ Conclusion: The configuration tested complied to the certification requirements specified in this report. Signed for on behalf of SGS Project Manager Technical Manager Report No.: GSM10166004M02 Issue Date: 04-08,2010 Page 2 of 14 SHGSM SGS-CSTC Standards Technical Services(Shanghai) Co, Ltd.. 3 rd Building, No. 889, Yishan Road, Shanghai, China 200233 t (86 -21) 61402666*2736 f (86 -21) 54500149 www.cn.sgs.com Testing Center-GSM Laboratory 中国•上海•徐汇区宜山路889号3号楼 邮编: 200233 t (86 -21) 61402666*2736 f (86 -21) 54500149 e [email protected] Member of the SGS Group (Société Générale de Surveillance) Table of Contents Change History.............................................................................................................................. 3 1. Report Overview.................................................................................................................... 4 2. Test Lab Declaration or Comments ..................................................................................... 4 3. Applicant Declaration or Comments ................................................................................... 4 4. Measurement Uncertainty..................................................................................................... 4 5. Testing Environment ............................................................................................................. 4 6. Primary Test Laboratory ....................................................................................................... 4 7. Details of Applicant ............................................................................................................... 5 8. Details of Manufacturer ........................................................................................................ 5 9. Other testing Locations ........................................................................................................ 5 10. Referenced Documents ........................................................................................................ 5 11. Primary Laboratory Accreditation Details ........................................................................... 7 12. SGS Shanghai Wireless Telecommunications lab, Personnel .......................................... 7 13. Test Equipment Information ................................................................................................. 8 14. Detailed Results .................................................................................................................... 8 14.1 Summary of Results .................................................................................................... 9 14.2 Measurement of RF conducted Power ...................................................................... 9 14.3 Calculation of time-averaged power .......................................................................... 9 14.4 MPE Evaluation ......................................................................................................... 10 14.5 Measurement Uncertainty......................................................................................... 11 15. Identification of Samples .................................................................................................... 11 16. Photographs of EUT............................................................................................................ 12 Annex The acceptable maximum antenna gain .............…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. 588 West Jindu Road, Songjiang District, Shanghai, China Telephone: +86 (0) 21 6191 5666 Fax: +86 (0) 21 6191 5655 [email protected] Report No.:SHEMO10030019402 Page 1 of 51 Tino Pan San Yuan E&E Section Manager Project Engineer SGS-CSTC (Shanghai)Co., Ltd. SGS-CSTC (Shanghai)Co., Ltd. This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only Member of the SGS Group (Société Générale de Surveillance) TEST REPORT Application No. : SHEMO10030019402 Applicant: Sierra Wireless Inc. FCC ID: N7NQ2687 IC ID: 2417C-Q2687 Equipment Under Test (EUT): Product Name: Airprime Q2687 Brand Name: WAVECOM Model Name: Airprime Q2687 Marketing Name: AirPrime Q2687 Intelligent Embedded Moudule Standards: IC RSS 132 Issue 2,RSS 133 Issue 5/ FCC part 2, 22H & 24E Date of Receipt: February 16,2010 Date of Test: February 20,2010 to March 8,2010 Date of Issue: March 15,2010 Test Result : PASS * * In the configuration tested, the EUT detailed in this report complied with the standards specified above. Please refer to section 2 of this report for further details. SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. ReportNo.: SHEMO10030019402 Page: 2 of 51 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 2 Test Summary Description of Test FCC Rules IC Standards Result RF Power Output 2.1046(a) 22.913(a) 24.232(b) RSS-132,4.4 RSS-133,6.4 Compliant 99% Occupied Bandwidth 2.1049(h) RSS-Gen,4.6 Compliant Out of Band Emissions at antenna Terminals and Band Edge 2.1051 22.917(a) 24.238(a) RSS-132,4.5 RSS-133,6.5 Compliant Field Strength of Spurious Emissions 2.1053 22.917(a) 24.238(a) RSS-132,4.5 RSS-133,6.5 Compliant Frequency Stability vs. Temperature and Voltage 2.1055 RSS-132,4.3 RSS-133,6.3 Compliant SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. ReportNo.: SHEMO10030019402 Page: 3 of 51 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e- document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only 3 Contents Page 1 COVER PAGE .................................................................................................................................... 1 2 TEST SUMMARY............................................................................................................................................. 2 3 CONTENTS....................................................................................................................................................... 3 4 GENERAL INFORMATION......................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. APPENDIX 3 PHOTOGRAPHS OF EUT SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. RADIATED EMISSION TEST SETUP SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. CONDUCTED EMISSION TEST SETUP