N7NU598USB Wireless Modem

****** ****** ****** USB Modem by Sierra Wireless 598U © 2008 ******. ****** and the logo are trademarks of ******. Other marks are the property of their respective owners. © 2008 Sierra Wireless. All rights reserved. Sierra Wireless, the Sierra Wireless logo, and the red wave design are trademarks of Sierra Wireless. Table of Contents Your ****** ****** ****** USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii Section 1: Introducing the ****** ****** ****** USB Modem . . . . . . . . . . . . . . . 1 1A. Introducing the ****** ****** ****** USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your ****** ****** ****** USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 TRU-Install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Section 2: Installing and Using the USB Modem . . . . . . . . . . . . . . . . . . . . . . . 5 2A. Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the Software on a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the Software on a Mac Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2B. Using Your USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Starting the Windows Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Starting the Mac Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Activating Your USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the USB Extension Cable and Laptop Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Viewing the User Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Removing the USB Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contacting ****** Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 2C. Using a Memory Card (microSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Inserting the Memory Card (microSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Removing the Memory Card (microSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Section 3: Technical Specifications, Regulatory and Safety Information, and Warranty . . . . . . . . . . . . . . . . . . . . . 21 3A. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 LED Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Radio Frequency and Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Software Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Environmental Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Mechanical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3B. Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Patents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Limitation of Liability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 Additional Information and Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 3C. Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Important Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Safety and Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 3D. One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 i Your ****** ****** ****** USB Modem Thank you for purchasing a ****** ****** ****** USB modem. This USB mod…

Text truncated - open the document above for the full version.

Sierra Wireless America, Inc 2290 Cosmos Ct. Carlsbad CA, 92011 Tel. 760-476-8700 Fax 760-476-8701 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 DATE: 22 July , 2008 Subject: Request for Confidentiality FCC ID: N7NU598 To Whom It May Concern: Pursuant to the provisions of Sections 0.457 and 0.459 of the Commission’s rules (47 CFR §§ 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Schematic Diagram Block Diagram Theory of Operation Tune-Up Procedure Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission’s policy, in order to comply with the marketing regulations in 47 CFR §2.803 and the importation rules in 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments until October 31, 2008: External Photos Internal Photos Test Setup Photos User Manual It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Todd Van Cleave Manager Engineering Services Carlsbad Research & Development Sierra Wireless America, Inc.

January 8, 2008 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 RE: Authorization Letter for Grantee Code N7N Dear Sir/Madam: I hereby authorize Mr. Todd Van Cleave of Sierra Wireless to act on my behalf in all manners relating to the application for equipment authorization including signing of all documents relating to these matters. Any and all acts carried out by Mr. Todd Van Cleave of Sierra Wireless on my behalf shall have the same effect as acts of my own. Sincerely, Ying Wang Staff Regulatory Specialist

1 Sierra Wireless America, Inc 2290 Cosmos Ct. Carlsbad CA, 92011 Tel. 760-476-8700 Fax 760-476-8701 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 DATE: 22 July , 2008 Subject: External Photos N7NU598 Side Views 2 Top View Bottom View

Sierra Wireless America, Inc 2290 Cosmos Ct. Carlsbad CA, 92011 Tel. 760-476-8700 Fax 760-476-8701 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 DATE: 30 July , 2008 Subject: Label for USB 598

Sierra Wireless America, Inc 2290 Cosmos Ct. Carlsbad CA, 92011 Tel. 760-476-8700 Fax 760-476-8701 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 DATE: 30 August , 2008 Subject: Label for USB 598

FCC OET BULLETIN 65 SUPPLEMENT C SAR EVALUATION REPORT FOR USB WIRELESS MODEM MODEL: USB598 FCC ID: N7NU598 IC: 2417C-U598 REPORT NUMBER: 08U11927-5A ISSUE DATE: AUGUST 20, 2008 Prepared for SIERRA WIRELESS INC. 2290 COSMOS CT. CARLSBAD, CA 92011 Prepared by COMPLIANCE CERTIFICATION SERVICES 47173 BENICIA STREET FREMONT, CA 94538, USA REPORT NO: 08U11927-5A DATE: August 20, 2008FCC ID: N7NU598 COMPLIANCE CERTIFICATION SERVICES Page: 2 of 38 This report shall not be reproduced except in full, without the written approval of CCS. Revision History Rev. Issued date Revisions Revised By -- JULY 29, 2008 Initial issue Sunny Shih A August 20, 2008 Additional tests on Horizontal-down and Vertical-right position Sunny Shih REPORT NO: 08U11927-5A DATE: August 20, 2008FCC ID: N7NU598 COMPLIANCE CERTIFICATION SERVICES Page: 3 of 38 This report shall not be reproduced except in full, without the written approval of CCS. TABLE OF CONTENTS 1 ATTESTATION OF TEST RESULTS ................................................................................................... 4 2 TEST METHODOLOGY ....................................................................................................................... 5 3 FACILITIES AND ACCREDITATION ................................................................................................... 5 4 CALIBRATION AND UNCERTAINTY .................................................................................................. 5 4.1 MEASURING INSTRUMENT CALIBRATION ............................................................................. 5 5 MEASUREMENT UNCERTAINTY ....................................................................................................... 5 6 DEVICE UNDER TEST (DUT) DESCRIPTION ................................................................................... 6 7 SYSTEM DESCRIPTION ..................................................................................................................... 7 7.1 COMPOSITION OF INGREDIENTS FOR TISSUE SIMULATING LIQUIDS .............................. 8 8 SIMULATING LIQUID CHECK ............................................................................................................. 9 8.1 SIMULATING LIQUID PARAMETER CHECK RESULT............................................................ 10 9 SYSTEM PERFORMANCE CHECK .................................................................................................. 16 9.1 SYSTEM PERFORMANCE CHECK RESULTS ........................................................................ 17 10 OUTPUT POWER VERIFICATION .................................................................................................... 18 11 SAR MEASURMENT RESULTS ........................................................................................................ 22 11.1 USB HORIZONTAL- DOWN ...................................................................................................... 22 11.2 USB HORIZONTAL-UP ............................................................................................................. 25 11.3 USB VERTICAL - LEFT ............................................................................................................. 28 11.4 USB VERTICAL - RIGHT ........................................................................................................... 31 12 EQUIPMENT LIST AND CALIBRATION ............................................................................................ 34 13 ATTACHMENTS ................................................................................................................................. 35 14 PHOTOS ............................................................................................................................................ 36 REPORT NO: 08U11927-5A DATE: August 20, 2008FCC ID: N7NU598 COMPLIANCE CERTIFICATION SERVICES Page: 4 of 38 This report shall not be reproduced except in full, without the written approval of CCS. ATTESTATION OF TEST RESULTS COMPANY NAME: SIERRA WIRELESS INC. 2290 COSMOS CT. CARLSBAD, CA 92011 EUT DESCRIPTION: USB Wireless Modem MODEL: USB598 DEVICE CATEGORY: Portable EXPOSURE CATEGORY: General Population/Uncontrolled Exposure DATE TESTED: July 24 – August 13, 2008 THE HIGHEST SAR VALUES: FCC / IC Rule Parts Frequency Range [MHz] The Highest SAR(1 g) Values 22H / RSS-102 824 - 849 0.99 mW/g / Horizontal-Up @ 12 mm 24E / RSS-102 1850 - 1910 1.27 mW/g / Horizontal-Up @ 12 mm REFERENCE STANDARD/TEST PROCEDURE FCC OET BULLETIN 65 SUPPLEMENT C and KDB447498 Mobile and Portable Device RF Exposure Procedures and Equipment Authorization Policies, Published on July 28, 2008 Compliance Certification Services, Inc. (CCS) tested the above equipment in accordance with the requirements set forth in the above standards. All indications of Pass/Fail in this report are opinions expressed by CCS based on interpretations and/or observations of test results. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Note: The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein. This document may not be altered or revised in any way unless done so by CCS and all revisions are duly noted in the revisions section. Any alteration of this document not carried out by CCS will constitute fraud and shall nullify the document. No part of this report may be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any government agency. Approved & Released For CCS By: Tested By: SUNNY SHIH EMC SUPERVISOR COMPLIANCE CERTIFICATION SERVICES CAROL BAUMANN EMC ENGINEER COMPLIANCE CERTIFICATION SERVICES REPORT NO: 08U11927-5A DATE: August 20, 2008FCC ID: N7NU598 COMPLIANCE CERTIFICATION SERVICES Page: 5 of 38 This report shall not be reproduced except in full, without the written approval of CCS. 1 TEST M…

Text truncated - open the document above for the full version.

Date/Time: 8/12/2008 5:14:56 PM Test Laboratory: Compliance Certification Services USB Horizontal-down DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.45 mho/m; ε r = 51.5; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - L ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.953 mW/g EV-DO Rel 0 @12 mm - L ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.62 V/m; Power Drift = 0.092 dB Peak SAR (extrapolated) = 1.40 W/kg SAR(1 g) = 0.906 mW/g; SAR(10 g) = 0.532 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.08 mW/g Date/Time: 8/12/2008 4:47:25 PM Test Laboratory: Compliance Certification Services USB Horizontal-down DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; ε r = 51.4; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - M ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 1.28 mW/g EV-DO Rel 0 @12 mm - M ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 11.8 V/m; Power Drift = -1.23 dB Peak SAR (extrapolated) = 1.53 W/kg SAR(1 g) = 0.994 mW/g; SAR(10 g) = 0.589 mW/g Maximum value of SAR (measured) = 1.18 mW/g Date/Time: 8/12/2008 6:45:27 PM Test Laboratory: Compliance Certification Services USB Horizontal-down DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA PCS band; Frequency: 1908.75 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1908.75 MHz; σ = 1.52 mho/m; ε r = 51.3; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2 (Twin); Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - H ch 2/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.36 mW/g EV-DO Rel 0 @12 mm - H ch 2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 13.0 V/m; Power Drift = -0.913 dB Peak SAR (extrapolated) = 1.74 W/kg SAR(1 g) = 1.12 mW/g; SAR(10 g) = 0.648 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.33 mW/g Date/Time: 7/29/2008 4:05:07 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA PCS band; Frequency: 1851.25 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 1851.25 MHz; σ = 1.44 mho/m; ε r = 52.3; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - L ch 2/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.19 mW/g EV-DO Rel 0 @12 mm - L ch 2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 14.6 V/m; Power Drift = -0.121 dB Peak SAR (extrapolated) = 1.88 W/kg SAR(1 g) = 1.18 mW/g; SAR(10 g) = 0.675 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.42 mW/g Date/Time: 7/29/2008 3:11:28 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA PCS band; Frequency: 1880 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1880 MHz; σ = 1.48 mho/m; ε r = 52.1; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Sur…

Text truncated - open the document above for the full version.

Date/Time: 8/13/2008 12:15:41 PM Test Laboratory: Compliance Certification Services USB Horizontal-down DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 0.995 mho/m; ε r = 54.7; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.0 deg. C; Liquid Temperature: 24.0 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - M ch 2/Area Scan (7x9x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.650 mW/g EV-DO Rel 0 @12 mm - M ch 2/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 6.74 V/m; Power Drift = -0.471 dB Peak SAR (extrapolated) = 0.828 W/kg SAR(1 g) = 0.571 mW/g; SAR(10 g) = 0.382 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 0.659 mW/g Date/Time: 7/25/2008 3:13:19 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 824.7 MHz;Duty Cycle: 1:1 Medium parameters used: f = 825 MHz; σ = 0.995 mho/m; ε r = 55.6; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - L-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.825 mW/g EV-DO Rel 0 @12 mm - L-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 9.82 V/m; Power Drift = 0.204 dB Peak SAR (extrapolated) = 1.20 W/kg SAR(1 g) = 0.799 mW/g; SAR(10 g) = 0.517 mW/g Maximum value of SAR (measured) = 0.946 mW/g Date/Time: 7/25/2008 2:47:05 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 1.01 mho/m; ε r = 55.4; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - M-ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.02 mW/g EV-DO Rel 0 @12 mm - M-ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.9 V/m; Power Drift = -0.082 dB Peak SAR (extrapolated) = 1.50 W/kg SAR(1 g) = 0.990 mW/g; SAR(10 g) = 0.636 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.17 mW/g Date/Time: 7/25/2008 3:48:40 PM Test Laboratory: Compliance Certification Services USB Horizontal-up DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 848.31 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 848.31 MHz; σ = 1.02 mho/m; ε r = 55.3; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(10.22, 10.22, 10.22); Calibrated: 4/23/2008 - Sensor-Surface: 3mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: Flat Phantom ELI4.0; Type: QDOVA001BA; Serial: SN:1003 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 EV-DO Rel 0 @12 mm - H ch/Area Scan (7x8x1): Measurement grid: dx=15mm, dy=15mm Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.04 mW/g EV-DO Rel 0 @12 mm - H ch/Zoom Scan (7x7x9)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=3mm Reference Value = 10.7 V/m; Power Drift = 0.010 dB Peak SAR (extrapolated) = 1.56 W/kg SAR(1 g) = 0.976 mW/g; SAR(10 g) = 0.627 mW/g Info: Interpolated medium parameters used for SAR evaluation. Maximum value of SAR (measured) = 1.15 mW/g Date/Time: 7/25/2008 4:33:14 PM Test Laboratory: Compliance Certification Services USB Vertical-left DUT: USB598; Type: USB Modem; Serial: FCC2-F2B Communication System: CDMA; Frequency: 836.52 MHz;Duty Cycle: 1:1 Medium parameters used (interpolated): f = 836.52 MHz; σ = 1.01 mho/m; ε r = 55.4; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN35…

Text truncated - open the document above for the full version.

Date/Time: 7/24/2008 9:16:25 AM Test Laboratory: Compliance Certification Services 5_System Performance Check - D1900 DUT: D1900V2 SN 5d043; Type: D1900V2; Serial: D1900V2 - SN: 5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.52 mho/m; ε r = 51; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 7.55 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 80.0 V/m; Power Drift = 0.319 dB Peak SAR (extrapolated) = 66.7 W/kg SAR(1 g) = 37.2 mW/g; SAR(10 g) = 19.7 mW/g Normalized to target power = 1 W and actual power = 0.25 W Maximum value of SAR (measured) = 41.8 mW/g Date/Time: 7/24/2008 9:33:02 AM Test Laboratory: Compliance Certification Services 5_System Performance Check - D1900 DUT: D1900V2 SN 5d043; Type: D1900V2; Serial: D1900V2 - SN: 5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 d=10mm, Pin=250mW/Z Scan (1x1x41): Measurement grid: dx=20mm, dy=20mm, dz=2.5mm Maximum value of SAR (measured) = 12.8 mW/g Date/Time: 7/29/2008 5:04:23 PM Test Laboratory: Compliance Certification Services System Performance Check - D1900 DUT: D1900V2 SN 5d043; Type: D1900V2; Serial: D1900V2 - SN: 5d043 Communication System: CW; Frequency: 1900 MHz;Duty Cycle: 1:1 Medium parameters used: f = 1900 MHz; σ = 1.51 mho/m; ε r = 52; ρ = 1000 kg/m 3 Phantom section: Flat Section Room Ambient Temperature: 25.5 deg. C; Liquid Temperature: 23.5 deg. C DASY4 Configuration: - Area Scan setting - Find Secondary Maximum Within: 2.0 dB and with a peak SAR value greater than 0.0012W/kg - Probe: EX3DV3 - SN3531; ConvF(8.7, 8.7, 8.7); Calibrated: 4/23/2008 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn500; Calibrated: 11/16/2007 - Phantom: SAM 2; Type: SAM 2; Serial: 1050 - Measurement SW: DASY4, V4.7 Build 71; Postprocessing SW: SEMCAD, V1.8 Build 184 d=10mm, Pin=250mW/Area Scan (7x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 7.34 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 81.1 V/m; Power Drift = 0.258 dB Peak SAR (extrapolated) = 68.4 W/kg SAR(1 g) = 37.5 mW/g; SAR(10 g) = 19.6 mW/g Normalized to target power = 1 W and actual…

Text truncated - open the document above for the full version.