N7ZRT-900WWireless AP

Contents Introduction......................................................................................3 Specifications..................................................................................3 Product Overview...........................................................................4 1. Before Using, Settings..............................................................6 2. Cable Settings.............................................................................7 2.1 WAN Connection...........................................................................................7 2.2 LAN Connection............................................................................................7 2.2.1 Wired LAN Connection.........................................................................................7 2.2.2 Wireless LAN Connection......................................................................................7 3. Computer Settings.....................................................................8 3.1 Windows 98/SE/ME.......................................................................................8 3.2 Windows 2000..............................................................................................12 3.3 Windows XP.................................................................................................15 4. Router Settings.........................................................................18 Before Settings...................................................................................................18 4.1 Basic Setup...................................................................................................19 4.1.1 LAN Setup............................................................................................................19 4.1.2 WAN Setup (Internet)..........................................................................................21 4.2 Wireless Setup..............................................................................................26 4.2.1 Basis Setup...........................................................................................................26 4.2.2 Wireless Security Setup........................................................................................28 4.2.3 ACL......................................................................................................................31 4.2.4 WDS.....................................................................................................................32 4.3 Advanced Setup...........................................................................................33 4.3.1 NAT Setup............................................................................................................33 4.3.2 Security Setup.......................................................................................................38 1 4.3.3 Routing Setup........................................................................................................41 4.3.4 Other Setup...........................................................................................................42 4.4 System Setup................................................................................................48 4.4.1 Upgrade.................................................................................................................48 4.4.2 Change Password..................................................................................................49 4.4.3 System Management.............................................................................................50 4.5 Status.............................................................................................................51 4.5.1 Status Info.............................................................................................................51 4.5.2 Internal Port Status................................................................................................52 4.5.3 DHCP Assigned....................................................................................................53 4.5.4 System Log...........................................................................................................54 Technical Support........................................................................55 2 Introduction The Wireless Broadband Router has 10/100 Mbps LAN(x4) and WAN(x1), and also supports Wireless connecting. Especially, The Router provides Wireless 140Mbps Nitro XM(Xtrem Multimedia) technology with direct link feature allowing to communicate directly among each Wireless Adapters. ¾ 10/100Mbps WAN(x1) and 10/100Mbps Switch LAN(x4) ¾ WAN & LAN with Auto MDI/MDIX Crossover ¾ Nitro XM – 140Mbps, IEEE 802.11g – 54Mbps, IEEE 802.11b – 11Mbps ¾ WDS (Wireless Distribution System) ¾ WEP & WPA for (Wireless Security ¾ ACL (Wireless LAN MAC Filtering) ¾ Port Forwarding or DMZ for Virtual Server ¾ Super DMZ & Real IP Forwarding for Real Server ¾ UPNP(Universal Plug and Play) ¾ Firewall based on IP, Mac Address, Port ¾ Dynamic DNS (dydns.org) ¾ Firmware Upgrade. Specifications Product Name AnyGate RG-3000A Power DC 12V / 1A Dimension 200 x 130 x 40 mm WAN Interface 1 Port 10.100 Mbps UTP(CAT-5) / RJ-45 LAN Interface 4 Port 10/100 Mbps UTP(CAT-5) / Switch / RJ-45 Wireless Interface IEEE 802.11g/b, Prisgm Nitro XM 2.4GHz Working Temperature 0 ̊C ~ 60 ̊C Working Humidity 10% ~ 50% 3 Product Overview FRONT VIEW ② ③ ④ ⑤ ① ① PWR Power LED. LED is on when turn on the Router. ② WAN WAN LED, LED is on when linking to DSL/Cable Modem. ③ INT Internet connection LED. LED is on when the router connect to internet. WAN settings of the Router is needed. Blinking means data communication between the Router and internet. ④ W-LAN Wireless LAN LED. LED is on when turning on the Router. ⑤ LAN 1/2/3/4 LAN LED, LED is on when the Router connect to NIC of LAN side PC with LAN cable. Blinking means data communic…

Text truncated - open the document above for the full version.

U3 CX86202 CPU U5/U6 SDRAM U12 ISL3686 U10 ISL3886 U13 CX3505 Power 12V U9_ EEP ROM Y1 X'TAL 25MHz U2 Reset 3.3 V U15 LAN 1*4 J1 3pin U16 WAN U1 U4 Flash U19 Transformer U18 Transformer CPU_ RST# JP1_Console Y3 OSC 40MHz PCI U14_ VCO U11 Reset J3 RT-900W Block Diagram

NEUTRON EMC LAB. Project No.：0602004 2/11 0602004 NEUTRON EMC LAB. Project No.：0602004 3/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 4/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 5/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 9/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 10/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 11/11 0602004

NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 47/71 -- FCC ID label -- The remained portion of label statement required by FCC is attached in the user’s manual. -- Location of Label on EUT -- 0.5 cm 4cm

NEUTRON EMC LAB. Project No.：0602004 6/11 0602004 NEUTRON EMC LAB. Project No.：0602004 7/11 0602004 0602004 NEUTRON EMC LAB. Project No.：0602004 8/11 0602004

Specification For Approval 2005 / 04 / 13 Date STA - 0823 File No. Customer Manufacturer 2.4GHz SMA 196mm Part Number Description Turbocomm P/N : MZ0050000300 INVAX P/N : AN2400-1901RS Approved By Invax 8154 Web Site:www.invax.com.tw Tel: (02)2788-5218 Fax: (02)2783-1658 E-maill:[email protected] CVX / FG-15a 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 1 1. Feature and Application . dipole antenna design . small size / high gain / omni-directional radiation pattern . IEEE 802.11 b / g WLAN AP (Access Point) application . Bluetooth / HomeRF / ISM Band and other 2.4 GHz wireless communication application 2. Specification 1. Frequency Range 2400 ~ 2500 MHz 2. V.S.W.R. < 2.0 3. Antenna Gain 5.0 dBi 0.5dBi 4. Antenna Radiation Pattern Omni-directional 5. Impedance 50 ohm 6. Color of Outer Cover Black 7. Material of Outer Cover TPE 8. Material of Hinge PC 9. Operation Temperature -40°C ~ + 90 C 10. Storage Temperature -30°C ~ + 75 C 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 2 3. S11 Return Loss Testing Data 4. V.S.W.R Testing Data 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 3 5. Smith Chart and Impedance Testing Data 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 4 6. Antenna Radiation Pattern 3D Radiation Pattern 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 5 7. Mechanical Dimension Drawing 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 6 8. Plastic Parts Material Specification Property Unit ASTM Test Method TPE Specific Gravity --- D792 0.88 Shrinkage % D955 0.8-2.5 Tensile Strength Kg/ cm³ D638 3.1 Flexural Strength Kg/ cm³ D790 --- 23°C Impact Strength Kg om/om D256 --- Hardness A Shore --- 13 0.45 MPa Heat Deflection Temp. °C D648 80 Melt Flow Index G/ min² D1238 10 Flammability --- UL94 HB Testing Data from Tel:86-0769-2774772 Tel:886-02-27775232 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 7 TEIJIN POLYCARBONATE SINGAPORE PTE LTD #01-01 111 SAKRA AVE. SINGAPORE 627881 SINGAPORE Material Designation: L-1250#(f2), L-1250U#, L-1250V#, L-1250Z# Product Description: Polycarbonate (PC) Color Min. thick. (mm) Flame Class HWI HAI RTI. Elec. RTI. Imp. RTI. Str. 0.40 V-2 4 3 80 80 80 0.84 V-2 4 3 80 80 80 1.5 HB 4 0 125 115 125 3.0 HB 1 0 125 115 125 ALL 6.0 HB 1 0 125 115 125 CXT:2, HVTR:2, D495:5 # Material designation may be suffixed with any one or two letters. Subjected to one or more of the following tests; Ultraviolet Light, Water Exposure in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL Inc. Report Date: 1999-07-29 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 8 9. Coaxial Cable RG-178 Data Sheet RG-178 Coaxial Cable Specification 1. Cable Type MIL – C – 17 / RG-178 2. Impedance 50 3 ohm Material silver-coated cooper Conductor Numbers 7 Conductor Size 0.102 mm 3. Inner Conductor Outer Diameter 0.3 mm Material FEP Color Clear Average Thickness 0.28 mm 4. Dielectric Layer Diameter 0.86 mm Material silver-coated cooper Construction 16-3-0.1 mm 5. Braid (Shielding) Coverage 95 % Material FEP Color Brown Average Thickness 0.25 mm 6. Outer Cover Diameter 1.80 0.05 mm 7. V.S.W.R Testing (DC ~ 6GHz) < 1.3 100 MHz 46 900 MHz 155 1800 MHz 295 2400 MHz 340 5200 MHz 505 8. Attenuation (dB / 100 meter ) 6000 MHz 550 9. Capacitance 97 3 ( pF / meter) 10. Maximum Power 30 dBm 11. Spark Test 2.0 KV 12. Rating Temp. and Voltage 200C / 30V 13. Conductor Resistance 335 ohm / KM / 20C max. 14. Dielectric Resistance 3 G ohm / KM / 20C min. 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-1901RS Page 9 10. Reliability Testing on Antenna Body Test Item Procedure Requirement 1. Visual inspection and dimension check Applicable methods using x5 magnification follow Specification 2. Rapid changing of temperature -40C (30minutes) to 90C (30minutes); 120 cycles After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5% 3. Damp Heat 500 hours at 60C; 90 ~ 95% RH After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5% 4. Endurance 500 hours at 90C After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5%

Specification For Approval 2005 / 03 / 23 Date STA - 0804 File No. Customer Manufacturer 2.4GHz RF Antenna with SMA Connector Part Number Description INVAX P/N : AN2400-0301RS Approved By Invax 8154 Web Site:www.invax.com.tw Tel: (02)2788-5218 Fax: (02)2783-1658 E-maill:[email protected] CVX / FG-15a 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 1 1. Feature and Application . dipole antenna design . small size / high gain / omni-directional radiation pattern . IEEE 802.11 b / g WLAN AP (Access Point) application . Bluetooth / HomeRF / ISM Band and other 2.4 GHz wireless communication application 2. Specification 1. Frequency Range 2400 ~ 2500 MHz 2. V.S.W.R. < 2.0 3. Antenna Gain 2.0 dBi 0.5dBi 4. Antenna Radiation Pattern Omni-directional 5. Impedance 50 ohm 6. Color of Outer Cover Black 7. Material of Outer Cover TPE (Black) 8. Material of Hinge PC (Black) 9. Connector SMA Male Reverse 10. Operation Temperature -40°C ~ + 90 C 11. Storage Temperature -30°C ~ + 75 C 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 2 3. S11 Return Loss Testing Data 4. V.S.W.R Testing Data 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 3 5. Smith Chart and Impedance Testing Data 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 4 6. Antenna Radiation Pattern Horizontal Plane 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 5 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 6 Vertical Plane 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 7 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 8 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 9 7. Mechanical Dimension Drawing 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 10 8. Plastic Parts Material Specification Property Unit ASTM Test Method TPE Specific Gravity --- D792 0.88 Shrinkage % D955 0.8-2.5 Tensile Strength Kg/ cm³ D638 3.1 Flexural Strength Kg/ cm³ D790 --- 23°C Impact Strength Kg om/om D256 --- Hardness A Shore --- 13 0.45 MPa Heat Deflection Temp. °C D648 80 Melt Flow Index G/ min² D1238 10 Flammability --- UL94 HB Testing Data from Tel:86-0769-2774772 Tel:886-02-27775232 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 11 TEIJIN POLYCARBONATE SINGAPORE PTE LTD #01-01 111 SAKRA AVE. SINGAPORE 627881 SINGAPORE Material Designation: L-1250#(f2), L-1250U#, L-1250V#, L-1250Z# Product Description: Polycarbonate (PC) Color Min. thick. (mm) Flame Class HWI HAI RTI. Elec. RTI. Imp. RTI. Str. 0.40 V-2 4 3 80 80 80 0.84 V-2 4 3 80 80 80 1.5 HB 4 0 125 115 125 3.0 HB 1 0 125 115 125 ALL 6.0 HB 1 0 125 115 125 CXT:2, HVTR:2, D495:5 # Material designation may be suffixed with any one or two letters. Subjected to one or more of the following tests; Ultraviolet Light, Water Exposure in accordance with UL 746C, where the acceptability for outdoor use is to be determined by UL Inc. Report Date: 1999-07-29 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 12 9. Coaxial Cable RG-178 Data Sheet RG-178 Coaxial Cable Specification 1. Cable Type MIL – C – 17 / RG-178 2. Impedance 50 ohm Material silver-coated cooper Conductor Numbers 7 Conductor Size 0.102 mm 3. Inner Conductor Outer Diameter 0.3 mm Material FEP Color Clear Average Thickness 0.28 mm 4. Dielectric Layer Diameter 0.86 mm Material silver-coated cooper Construction 16-3-0.1 mm 5. Braid (Shielding) Coverage 95 % Material FEP Color Brown Average Thickness 0.25 mm 6. Outer Cover Diameter 1.80 0.05 mm 7. V.S.W.R Testing (DC ~ 6GHz) < 1.3 100 MHz 46 900 MHz 155 1800 MHz 295 2400 MHz 340 5200 MHz 505 8. Attenuation (dB / 100 meter ) 6000 MHz 550 9. Capacitance 97 3 ( pF / meter) 10. Maximum Power 30 dBm 11. Spark Test 2.0 KV 12. Rating Temp. and Voltage 200C / 30V 13. Conductor Resistance 335 ohm / KM / 20C max. 14. Dielectric Resistance 3 G ohm / KM / 20C min. 2.4 GHz RF Antenna with SMA Connector Product Number: AN2400-0301RS Page 13 10. Reliability Testing on Antenna Body Test Item Procedure Requirement 1. Visual inspection and dimension check Applicable methods using x5 magnification follow Specification 2. Rapid changing of temperature -40C (30minutes) to 90C (30minutes); 120 cycles After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5% 3. Damp Heat 500 hours at 60C; 90 ~ 95% RH After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5% 4. Endurance 500 hours at 90C After 2 hours recovery: 1. no visible damage 2. bandwidth tolerance < 5% 11. Ordering Information Part Number: AN 2400 – 03 01 RS Product Type AN= Antenna Frequency Code 2400= 2400 ~ 2500 MHz Dimension Code 03= see the mechanical drawing page Cable Code 01= RG-178 Connector Code RT= TNC male reverse RS= SMA male reverse

Specification For Approval 2005 / 03 / 04 Date STA – 0789 File No. Customer Manufacturer SMA 90Type() Part Number Description INVAX P/N : CR-RSPRF5A2727B Approved By Invax 8154 Web Site:www.invax.com.tw Tel: (02)2788-5218 Fax: (02)2783-1658 E-maill:[email protected] CVX / FG-15a

Product Descriptions The EUT is a Wireless AP. A major technical descriptions of EUT is described as following: Operation Frequency 2400~2483.5 MHz Modulation Type DSSS Bit Rate of Transmitter 11Mbps(CCK)/802.11b & 54Mbps(OFDM)/802.11g Number Of Channel 11 Channel Antenna Gain(Peak) 2dBi Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual .

55 44 33 22 11 D D C C B B A A RESET to Facto ry Default TurboComm TECH. INC. Layout 裸空 POWER X0 RT-900W B 18 Sunday, January 08, 2006 TitleSize Document Number Rev Date: Sheet of RESET_2 SRESET# CPU_RST# RESET_2 3.3V 3.3V 3.3V 3.3V 3.3V_SDRAM R1750 SW1SW_MAG-SPD 2 13 FB6 5335R33-005 1 2 12 C3 0.1uF + C1 220uF/25V H7 HOLE-NTH4 1 . + C2 10uF/25V U1 AP1501-3.3V 1 2 3 4 5 6 V_IN V_OUT GND FB SD TAB D3 SSD34 C170.1uF L2 100uH/3A L3 150ohm/100MHz + C5 47uF U2 G688 3 1 2 VCC RET GND L8 BLM18TG102TN1 L1 150ohm/100MHz C8 0.1uF SW2 SW2PIN + C6 47uF R110K R21K R1760 (NC) H5 HOLE-NTH4 1 . H6 HOLE-NTH4 1 . C7 0.1uF GAP1 SURGE 21 L11 DLW21SN900SQ2 23 41 H1 HOLE-NTH5 1 . H2 HOLE-NTH5 1 . J1DC-JACK 123 ... + C4 1000uF/10V C601 104pF H3 HOLE-NTH5 1 . L9 BLM18TG102TN1 H4 HOLE-NTH5 1 . 55 44 33 22 11 D D C C B B A A U3A-A TurboComm TECH. INC. CPU-A X0 RT-900W B 28 Wednesday, January 25, 2006 TitleSize Document Number Rev Date: Sheet of MM1MM0 MD18MD9MD5MD8MD17MD13MD11MD29MD25MD19MD14MD21MD16MD20MD10MD24MD26MD31MD28MD27MD30MD23MD22MD12MD15MD0MD1MD7MD6MD4MD3MD2 MM2 MA4MA5MA9MA8MA1MA6MA3 MM3 MA2 MA7 MA11MA10MA0 PCI_CLKPCI_GNT0# PCI_REQ0#PCI_FRAME#PCI_TRDY#PCI_STOP#A19_CBE3#A17_CBE1#D1_AD1D3_AD3D5_AD5D7_AD7D9_AD9D11_AD11D13_AD13D15_AD15A22_AD17A3_AD19A5_AD21A7_AD23A9_AD25A11_AD27A13_AD29A15_AD31 PPI_A1 FLASH_RD#FLASH_WR# MM0MM1MM2MM3 MB0MB1MCLKMCAS#MWE#MCS0# MD0MD1MD3MD4MD5MD6MD7MD8MD9MD10MD11MD12MD13MD14MD15 MD16MD17MD18MD19MD20MD21MD22MD23MD24MD25MD26MD27MD28MD29MD30MD31MRAS# MD2 MA4 D10_AD10A16_CBE0# PCI_RST# MA2 D4_AD4D12_AD12D14_AD14PCI_DEVSEL#A14_AD30 MA1 A6_AD22D0_AD0 MA11 D8_AD8PCI_INTA#D6_AD6PCI_IRDY#D2_AD2 MA8 A10_AD26A4_AD20A18_CBE2# MA0MA9 A20_PAR MA7 A21_AD16A2_AD18A12_AD28 MA3MA10 A8_AD24 MA6MA5 FLASH_CS# C50810pF C50910pF R3 62 AC7 15pF 10% 1 2 3 45 6 7 8 R11 0 R12 0 R6 51 AC9 15pF 10% 1 2 3 45 6 7 8 R7 51 AC8 15pF 10% 1 2 3 45 6 7 8 R8 51 R9 51 R10 51 R4 51 R5 51 AR7 51 1234 5678 AR6 51 1234 5678 AR5 51 1234 5678 U3A CX86202 G20G19 J18 H19H20R18H18 G18 R19 T20T19T18 R20U20 M20 U19 Y19 U18 V20V19V18 W20 Y20 W19W18 Y18 V17 W17 Y17 V16 W16 Y16 U15 J19J20 K18K19K20 L20L19L18 M19M18 N20N19N18 P20P19P18 W15 V15 Y15 V14 W14 Y13 W13 Y14 V13 P1N2M3M1L2K3K1J2J1J3K2L1L3M2N1N3U9W8W7U8U7W6Y5V5Y4W5V6Y6V7Y7V8Y8R1R2V2R3U4V1R4T1T2T3T4U2U3P2P3Y3W4V3V4W1W2W3Y1Y2U1 PCI_CLKPCI_RET#PCI_GNT[0]#PCI_GNT[1]#PCI_REQ[0]#PCI_IRDY#PCI_REQ[1]#PCI_INTA#PCI_FRAME#PCI_TRDY#PCI_DEVSEL#PCI_STOP#PPI_A[18]/CBE2PPI_A[20]/PARPPI_A[19]/CBE3PPI_A[17]/CBE1PPI_A[16]/CBE0PPI_D[15]/AD15PPI_D[14]/AD14PPI_D[13]/AD13PPI_D[12]/AD12PPI_D[11]/AD11PPI_D[8]/AD[8]PPI_D[10]/AD10PPI_D[9]/AD[9]PPI_D[7]/AD[7]PPI_D[6]/AD[6]PPI_D[5]/AD5]PPI_D[4]/AD[4]PPI_D[3]/AD[3]PPI_D[2]/AD[2]PPI_D[1]/AD[1]PPI_D[0]/AD[0]PPI_A[15]/AD31PPI_A[14]/AD30PPI_A[13]/AD29PPI_A[12]/AD28PPI_A[11]/AD27PPI_A[10]/AD26PPI_A[9]/AD[25PPI_A[8]/AD[24PPI_A[7]/AD[23PPI_A[6]/AD[22PPI_A[5]/AD[21PPI_A[4]/AD[20PPI_A[3]/AD[19PPI_A[2]/AD[18PPI_A[22]/AD17PPI_A[21]/AD16PPI_A[23]PPI_A[1]PPI_CS[2]#PPI_CS[1]#PPI_CS[0]_FLASPPI_STRB_APPI_STRB_BPPI_REQ_RPPI_REQ_W MD[31]MD[30]MD[29]MD[28]MD[27]MD[26]MD[25]MD[24]MD[23]MD[22]MD[21]MD[20]MD[19]MD[18]MD[17]MD[16]MD[15]MD[14]MD[12]MD[13]MD[11]MD[10] MD[9]MD[8]MD[7]MD[6]MD[5]MD[4]MD[3]MD[2]MD[1]MD[0] MA[12]MA[11]MA[10] MA[9]MA[1]MA[0]MA[8]MA[7]MA[6]MA[5]MA[4]MA[3]MA[2] MM[3]MM[2]MM[1]MM[0] MB[1]MB[0] MCS[1]#MCS[0]# MWE# MRAS#MCAS# MCLK AR4 51 1234 5678 AR3 51 1234 5678 AR2 51 1234 5678 AR1 51 1234 5678 AC5 15pF 10% 1 2 3 45 6 7 8 AR8 51 1234 5678 AC6 15pF 10% 1 2 3 45 6 7 8 TV1 1 . TV2 1 . C50210pF AR9 51 1234 5678 C50110pF C50310pF C197 33pF C50410pF C198 33pF C50510pF C50610pF C50710pF 55 44 33 22 11 D D C C B B A A U3A-B TurboComm TECH. INC. 2005-08-12 SWAP PIN CPU-B X0 RT-900W C 38 Sunday, January 08, 2006 TitleSize Document Number Rev Date: Sheet of VBG XTL0XTL1 REFRES BOOTOPT TRST# PLL_VDDA REG_CTL19REG_CTL18AREG_CTL18D UART_TXUART_RX TXP4RXP4 CPU_RST# RXN0RXN4RXP0TXN2PHY_LED7TXP2PHY_LED0#TXP1 RUN_LED UART_RX TXN1RXP2TXP3TXN3RXN1RXN2PHY_LED1#TXN4PHY_LED2#PHY_LED5 UART_TX TXP0RXN3RXP1 INT_LED TXN0 WLAN_LED PHY_LED4PHY_LED6 SRESET# RXP3PHY_LED3# VREGEN VREGEN 3.3V 3.3V VCORE +3.3VA +1.8VA 3.3V 3.3V 3.3V +3.3VA +1.8VA +1.9VA VCORE VCORE VCORE+1.9VA +1.8VA 3.3V 3.3V +1.9VA 3.3V +1.8VA 3.3V VCORE + C45 10uF FB1 5335R33-005 1 2 12 C63 0.1uF C53 0.1uF/NO STUFF + C35 47uF C64 100pF R24 1K/NO STUFF + C34 47uF + C59 10uF FB3 5335R33-005 12 12 R25 1K/NO STUFF U3B CX86202 A18 B18 C11 C12 C13 C14 C15 C16 C17 C18 D16 D17 D18 G3 G17 H2 H3 H8 H9 H10 H11 H12 H13 J8 J9 J10 J11 J12 J13 J17 K8 K9 K10 K11 K12 K13 L8 L9 L10 L11 L12 L13 M8 M9 M10 M11 M12 M13 N8 N9 N10 N11 N12 N13 F19F20 C19C20U13D19U12 V12 W12 Y12Y11 W11 D20 E19E20 F18 B5 C5D1C1 B1A1 D2C2D3C3 B2A2B3 F3F2F1 H1 E2 G1G2 E1 R17 D6 A5 C6 A6B6 F4 F17 H17 J4 K17 L4 M4 M17 P4 P17 T17 U5 U11 U16 K4 L17 N4 N17 U6 U14 U17 D10 D15 D11 D12 D13 D14 A8B8A9B9A10B10A11B11A12B12A13B13A14B14A15B15A16B16A17B17C9A7B7C10D9C8D7C7D8D5V11Y10W10V10U10Y9W9V9B20B19A19A20E18E17C4B4A4A3E4D4E3H4G4 VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS VSS TDMFSYNCTDMCLKV_DPRST#[0]V_DPIRQ#[0]V_INUSELED[0]#V_RFREQSPI_DIN_DIOSPI_DOUTSPI_DCLKSPI_CS[0]#SPI_INT[0]#SPI_RST[0]#GPIO_SPARE[0]GPIO_SPARE[1]GPIO_SPARE[2]FACTORY_DFLT#UART_RXDUART_TXDLPC_D[0]LPC_D[1]LPC_D[2]LPC_D[3]LPC_D[4]LPC_D[5]LPC_D[6]LPC_D[7]LPC_CLKLPC_ENDLPC_DIRLPC_NEXTLPC_RESETUSB_USER_WAKELPC_CLKUOTUSB_PWR_#USB_NUSB_PUSB_OC#BOOTOPTTESTTESTENRESET#XTL1XTL0 VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDO VDDC VDDC VDDC VDDC VDDC VDDC VDDC VDDAH VDDAH VDDAL VDDAL VDDAL VDDAL TXP0 TXN0 RXP0 RXN0 TXP1 TXN1 RXP1 RXN1 TXP2 TXN2 RXP2 RXN2 TXP3 TXN3 RXP3 RXN3 TXP4 TXN4 RXP4 RXN4 REF_RES ANALOG_TESTAANALOG_TESTB REG_CTL19 VSENSE19 REG_CTL1BA VSENSE1BD REG_TL1BD VBG VREGEN PHY_LED[0]PHY_LED[1]PHY_LED[2]PHY_LED[3]PHY_LED[4]PHY_LED[5]PHY_LED[6]PHY_LED[7] TDO TCK TMS TDI TRST0#TRST1# BYP_PCICLK BYP_CPUCLK0BYP_CPUCLK1 B…

Text truncated - open the document above for the full version.

NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 2/71 Declaration Neutron represents to the client that testing is done in accordance with standard procedures as applicable and that test instruments used has been calibrated with the standards traceable to National Measurement Laboratory (NML) of R.O.C., or National Institute of Standards and Technology (NIST) of U.S.A. Neutron's reports apply only to the specific samples tested under conditions. It is manufacture’s responsibility to ensure that additional production units of this model are manufactured with the identical electrical and mechanical components. Neutronshall have no liability for any declarations, inferences or generalizations drawn by the client or others from Neutron issued reports. Neutron’s reports must not be used by the client to claim product endorsement by the authorities or any agency of the Government. This report is the confidential property of the client. As a mutual protection to the clients, the public and Neutron-self, extracts from the test report shall not be reproduced except in full with Neutron’s authorized written approval. Neutron’s laboratory quality assurance procedures are in compliance with the ISO Guide 17025 requirements, and accredited by the conformity assessment authorities listed in this test report. Limitation For the use of the authority's logo is limited unless the Test Standard(s)/Scope(s)/Item(s) mentioned in this test report is (are) included in the conformity assessment authorities acceptance respective. Assessment Authorities Test Standard/Scope/Item Acceptance FCC Part 15 Subpart B IEC/CISPR22 AS/NZS CISPR 22 CNS 13438 FCC Part 15 Subpart B CISPR 22/EN 55022 AS/NZS CISPR 22 VCCI -Technical Requirement CNS 13438 SS IEC/CISPR 22 IEC/EN 61000-3-2 IEC/EN 61000-4-5 IEC/EN 61000-3-3 IEC/EN 61000-4-6 IEC/EN 61000-4-2 IEC/EN 61000-4-8 IEC/EN 61000-4-3 IEC/EN 61000-4-11 IEC/EN 61000-4-4 NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 3/71 Table of Contents Page 1 . General Information 5 1.1 Applicant 5 1.2 Manufacturer 5 1.3 Equipment Under Tested 5 1.4 OEM Brand/Model 5 1.5 Model Difference 5 1.6 Product Descriptions 6 1.7 Connecting I/O Port(s) 6 1.8 Power Supplied 6 1.9 Products Covered (if applicable) 6 1.10 Description of Test Mode(s) 6 2 . RFI Emissions Measurement 7 2.1 Test Facility 7 2.2 Standard Compliance 7 2.4 Test Methodolog 7 2.5 Deviations from Standard Test Method 8 2.6 Sample(s) Tested 8 2.7 Measurement Instruments 8 2.8 Measurement Uncertainty 8 2.9 Tested System Set-Up/Configuration Details 8 2.10 EUT Operating Conditions 12 3 . Justification 13 3.1 Limitations 13 3.1.1 Power Line Conducted Emission 13 3.1.2 Radiated Emission Limits 13 3.2 Measurement Justification 14 3.2.1 Conducted Emission 14 3.2.2 Radiated Emission 14 3.2.3 Field Strength Calculation 15 3.3 Measurement Data 15 Table 4 Conducted Emission Data 17 Table 5 Radiated Emission Data 23 NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 4/71 Table of Contents Page 4 . Bandwidth 37 4.1 Applied procedures / limit 37 4.2 Test Setup 37 4.3 Test Result 37 5 . Peak Output Power 38 5.1 Applied procedures / limit 38 5.2 Test Setup 38 5.3 Test Result 38 6 . Antenna conducted Spurious Emission 39 6.1 Applied procedures / limit 39 6.2 Test Setup 39 6.3 Test Result 39 7 . Power Spectral Density 40 7.1 Applied procedures / limit 40 7.2 Test Setup 40 7.3 Test Result 40 8 . RF Exposure 41 8.1 Applied procedures / limit 41 8.2 Test Result 41 Attachment 42 Attachment - A 43 Attachment - B 46 Attachment - C 48 Attachment - D 52 Attachment - E 56 Attachment - F 63 Attachment - G 67 NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 5/71 1. General Information 1.1 Applicant Name : TURBOCOMM TECH. INC Address : 2F, No. 19-8, San Chong Road, Nan-Kang, Taipei 115, Taiwan, R.O.C. 1.2 Manufacturer Name : N/A Address : N/A 1.3 Equipment Under Tested Name : Wireless AP Model No. : RT-900W; RG3500A 1.4 OEM Brand/Model (if applicable) OEM Brand(s)/Model(s) except the basic model in sub-clause 1.3 is (are) the follows: OEM Brand : N/A Model No. : N/A 1.5 Model Difference (Series, Versions, if any) Except the basic model no. (model designation of the sample tested in this test report), additional model no. covered is(are) : Model RG3500A is identical to model RT-900W except the model designation. NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 6/71 1.6 Product Descriptions (Application/Features/Specification) The EUT is a Wireless AP. A major technical descriptions of EUT is described as following: Operation Frequency 2400~2483.5 MHz Modulation Type DSSS Bit Rate of Transmitter 11Mbps(CCK)/802.11b & 54Mbps(OFDM)/802.11g Number Of Channel 11 Channel Antenna Gain(Peak) 5dBi(INVAX/AN2400-1901RS), 2dBi(INVAX/AN2400-0301RS) Antenna Type 1) Dipole Antenna 2) The antenna isn’t standard connector that is reversed polarity and if you want to use the standard connector is not allowed. Based on the application, features, or specification exhibited in User's Manual, the EUT is considered as an ITE/Computing Device. More details of EUT technical specification, please refer to the User's Manual. Channel List Channel Frequency (MHz) Channel Frequency (MHz) Channel Frequency (MHz) 01 2412 05 2432 09 2452 02 2417 06 2437 10 2457 03 2422 07 2442 11 2462 04 2427 08 2447 1.7 Connecting I/O Port(s) Please refer to the User's Manual. 1.8 Power Supplied Power Source : DC Voltage supplied from AC/DC adapter. Power Cord : Detachable, non-shielded type. Power Rating : AC I/P 100-240V, 50-60Hz, 0.5A / DC O/P 12V, 1.0A 1.9 Products Covered (if applicable) The sample tested including the following sub-system/module/accessory : Sub-system/ Module/ Accessory Model/Type No. Int. Inst./ Ext. Cont. ADAPTOR ADS10-W 120100 Ext. Cont. 1.10 Description of Test Mode(s) To investigate the maximum EMI emission characteristics generates from EUT, the test system was pre-scanning tested base on the consideration of following EUT operation mode or test configuration mode which possible have ef…

Text truncated - open the document above for the full version.

NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 44/71 Conducted Measurement Photos NEUTRON EMC LAB. Report No.：NEI- FCCP-1-0602004 45/71 Radiated Measurement Photos