N89-ISB7105Internet Protocal Set Top Box Basic SD/HD with WiFi

Installation Manual Cisco IPTV Receivers Model ISB7105 3 Contents Notice for Installers ..........................................................................................................4 IMPORTANT SAFETY INSTRUCTIONS.............................................................................. 4 Change the Way You Watch TV ....................................................................................... 7 What’s In the Carton? ...................................................................................................... 7 Safety First ....................................................................................................................... 7 Identify Your Receiver with the Serial Number ................................................................. 7 In This Manual .................................................................................................................. 7 Protecting You and the Environment ................................................................................ 7 Front Panel ....................................................................................................................... 8 Back Panel ....................................................................................................................... 9 Connecting the Receiver ................................................................................................10 ISB7105 Wireless Network Connection .........................................................................11 Connecting the Wireless Access Point to the Wireless Gateway ........................................ 12 Pairing the Wireless Access Point and Receiver ............................................................12 Connections for a High-Defi nition TV (HDTV) ................................................................13 Connections for a Standard-Defi nition TV (SDTV) .........................................................14 Connections for a VCR or DVD Recorder .......................................................................15 Connecting an Over-the-Air Converter Box ...................................................................15 Connecting to an HDTV with an HDMI Connector ..........................................................16 Connecting to an HDTV with a DVI Connector ...............................................................17 Connecting to an HDTV with Component (YPbPr) Connectors ......................................18 Connecting to an SDTV with Component (YPbPr) Connectors ......................................19 Connecting to an SDTV with an RCA-Type Connector ..................................................20 Connecting to a Home Theater System with Component (YPbPr) Connectors .............21 Connecting to a Stereo VCR or DVD Recorder (optional) ..............................................22 Troubleshooting .............................................................................................................23 Avoid Screen Burn-In .....................................................................................................23 Frequently Asked Questions ..........................................................................................24 Picture Formats ..............................................................................................................25 Index ..............................................................................................................................26 Compliance Information .................................................................................................28 4 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fi t into your outlet, consult an electrician for replacement of the obsolete outlet. 10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11) Only use attachments/accessories specifi ed by the manufacturer. 12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualifi ed service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. Power Source Warning A label on this product indicates the correct power source for this product. Operate this product only from an electrical outlet with the voltage and frequency indicated on the product label. If you are uncertain of the type of power supply to your home or business, consult your service provider or your local power company. The AC inlet on the unit must remain accessible and operable at all times. IMPORTANT SAFETY INSTRUCTIONS Notice for Installers The servicing instructions in this notice are for use by qualifi ed service personnel only. To reduce the risk of electric shock, do not perform any servici…

Text truncated - open the document above for the full version.

CyberTAN Technology, Inc. 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Tel: 886-3-5777777 / Fax: 886-3-5777788 Date: 2012/10/25 Confidential Letter Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Confidentiality Request for FCC ID：N89-ISB7105 Gentlemen: The form 731 and application have been electronically submitted and any attachments will be up loaded to your web site to be used in obtaining a grant of certification. Short-term Pursuant to DA 04-1705 of the Commission’s pubic notice, we request short-term confidential treatment for the following information until 180 days after the Grant Date of Equipment Authorization in order to ensure sensitive business information remains confidential until the actual marketing of the device: 1. External Photos 2. Internal Photos 3. Test Setup photos 4. User’s Manual Permanent CyberTAN Technology, Inc. requests that the material in the following files be withheld from public disclosure in accordance with Section 0.459 of the Commission’s Rules, 47 C.F.R. 0.459, following grant of the application. 1. Block Diagram 2. Circuit Diagram 3. Operational Description Should you require any further information, please contact the undersigned. Thank you for your consideration in this matter. Sincerely, Applicant’s company name : CyberTAN Technology, Inc. Applicant’s company address : 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Signature : _____________________________ Job Title and Dept. : Amy Wu. / Manager E-Mail : [email protected] Tel. : 886-3-5777777

CyberTAN Technology, Inc. 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Tel: 886-3-5777777 / Fax: 886-3-5777788 Ad Hoc Mode Function Declaration Date: 2012/10/25 FCC ID：N89-ISB7105 To whom it may concern: We, CyberTAN Technology, Inc., declare that the EUT (Model Name: ISB7105) doesn’t have Ad Hoc function on “non-US frequencies” and/or “on DFS frequencies”. In non-associated mode, that software and associated drivers will not initiate any transmission on DFS frequencies. This includes transmissions for beacon ad-hoc peer-to-peer modes. Sincerely, FCC Grantee contact person information. Applicant’s company name : CyberTAN Technology, Inc. Applicant’s company address : 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Signature : _____________________________ Job Title and Dept. : Amy Wu. / Manager E-Mail : [email protected] Tel. : 886-3-5777777

CyberTAN Technology, Inc. 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Tel: 886-3-5777777 / Fax: 886-3-5777788 Power of Attorney Date: 2012/10/25 Dear Sir, I hereby have entrusted the following person to be a proxy regarding application for Type Certification. Sporton International Inc. Address : No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. Name : Leo Huang Job Title : Manager e-mail : [email protected] I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment: Cisco / ISB7105 FCC ID: N89-ISB7105 Product name: Internet Protocal Set Top Box Basic SD/HD with WiFi FCC Grantee contact person information. Applicant’s company name : CyberTAN Technology, Inc. Applicant’s company address : 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Signature : _____________________________ Job Title and Dept. : Amy Wu. / Manager E-Mail : [email protected] Tel. : 886-3-5777777

Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 1 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Photographs of EUT Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 2 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 3 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 4 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Adapter 1 Brand name: AcBel Model No.: ADB022 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 5 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 6 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Adapter 2 Brand name: LITEON Model No.: PB-1240-6SA1 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 7 OF 7 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255

Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 1 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Photographs of EUT Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 2 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 3 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 4 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 5 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 6 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 7 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 8 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255 Report No.:2O0812 SPORTON International Inc. PAGE NUMBER : 9 OF 9 TEL : 886-2-2696-2468 ISSUED DATE : Nov. 12, 2012 FAX : 886-2-2696-2255

Report No.: FR2O0812 FCC ID: N89-ISB7105 Page No. : B1 of B3 Appendix B. Maximum Permissible Exposure Report No.: FR2O0812 FCC ID: N89-ISB7105 Page No. : B2 of B3 1. Maximum Permissible Exposure 1.1. Applicable Standard Systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy levels in excess limit for maximum permissible exposure. In accordance with 47 CFR FCC Part 2 Subpart J, section 2.1091 this device has been defined as a mobile device whereby a distance of 0.2 m normally can be maintained between the user and the device. (A) Limits for Occupational / Controlled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-3.0 614 1.63 (100)* 6 3.0-30 1842 / f 4.89 / f (900 / f)* 6 30-300 61.4 0.163 1.0 6 300-1500 F/300 6 1500-100,000 5 6 (B) Limits for General Population / Uncontrolled Exposure Frequency Range (MHz) Electric Field Strength (E) (V/m) Magnetic Field Strength (H) (A/m) Power Density (S) (mW/ cm²) Averaging Time |E|²,|H|² or S (minutes) 0.3-1.34 614 1.63 (100)* 30 1.34-30 824/f 2.19/f (180/f)* 30 30-300 27.5 0.073 0.2 30 300-1500 F/1500 30 1500-100,000 1.0 30 Note: f = frequency in MHz ; *Plane-wave equivalent power density 1.2. MPE Calculation Method E (V/m) ＝ d GP30 Power Density: Pd (W/m²) ＝ 377 2 E E ＝ Electric field (V/m) P ＝ Average RF output power (W) G ＝ EUT Antenna numeric gain (numeric) d ＝ Separation distance between radiator and human body (m) The formula can be changed to Pd ＝ 2 377 30 d GP   From the EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Report No.: FR2O0812 FCC ID: N89-ISB7105 Page No. : B3 of B3 1.3. Calculated Result and Limit For 5GHz UNII Band: (15.407) Metal antenna : Metal Antenna Max Conducted Power for IEEE 802.11n: 23.70 dBm Directional Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 6.01 3.9905 23.7032 234.5982 0.186340 1 Complies Note: Directional Gain = G Ant ＋ 10log (N Ant /N ss ) For 5GHz ISM Band: (15.247) Metal antenna : Metal Antenna Max Conducted Power for IEEE 802.11n : 24.77 dBm Directional Antenna Gain (dBi) Antenna Gain (numeric) Average Output Power (dBm) Average Output Power (mW) Power Density (S) (mW/cm²) Limit of Power Density (S) (mW/cm²) Test Result 6.01 3.9905 24.7654 299.5970 0.237968 1 Complies Note: Directional Gain = G Ant ＋ 10log (N Ant /N ss )

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company CyberTAN Technology, Inc. Applicant Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. FCC ID N89-ISB7105 Manufacturer’s company CyberTAN Technology, Inc. Manufacturer Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Product Name Internet Protocal Set Top Box Basic SD/HD with WiFi Brand Name Cisco Model Name ISB7105 Test Rule Part(s) 47 CFR FCC Part 15 Subpart C § 15.247 Test Freq. Range 5725 ~ 5850MHz Received Date Aug. 01, 2012 Final Test Date Nov. 02, 2012 Submission Type Original Equipment Statement Test result included is only for the IEEE 802.11n (5725 ~ 5850MHz) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009 and 47 CFR FCC Part 15 Subpart C and KDB 558074 – 20120118 & KDB662911 D01- 20121004. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR2O0812AA Report Format Version: 01 Page No. : i of ii FCC ID: N89-ISB7105 Issued Date :Nov. 12, 2012 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION ..................................................................................................................................... 3 3.1. Product Details ........................................................................................................................................................................................... 3 3.2. Accessories ................................................................................................................................................................................................. 4 3.3. Table for Filed Antenna ............................................................................................................................................................................. 5 3.4. Table for Carrier Frequencies ................................................................................................................................................................... 6 3.5. Table for Test Modes .................................................................................................................................................................................. 7 3.6. Table for Testing Locations........................................................................................................................................................................ 8 3.7. Table for Supporting Units ......................................................................................................................................................................... 8 3.8. Table for Parameters of Test Software Setting ....................................................................................................................................... 9 3.9. Test Configurations ................................................................................................................................................................................... 10 4. TEST RESULT ......................................................................................................................................................... 12 4.1. AC Power Line Conducted Emissions Measurement ......................................................................................................................... 12 4.2. Maximum Conducted Output Power Measurement ......................................................................................................................... 16 4.3. Power Spectral Density Measurement .................................................................................................................................................. 18 4.4. 6dB Spectrum Bandwidth Measurement ............................................................................................................................................. 22 4.5. Radiated Emissions Measurement ......................................................................................................................................................... 25 4.6. Band Edge Emissions Measurement ...................................................................................................................................................... 36 4.7. Antenna Requirements ........................................................................................................................................................................... 41 5. LIST OF MEASURING EQUIPMENTS .................................................................................................................... 42 6. TEST LOCATION .................................................................................................................................................. 44 7. TAF CERTIFICATE OF ACCREDITATION .............................................................................................................. 45 APPENDIX A. TEST PHOTOS ........................................................................................................................... A1 ~ A5 APPENDIX B. MAXIMUM PERMISSIBLE EXPOSURE ..........…

Text truncated - open the document above for the full version.

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC RADIO TEST REPORT Applicant’s company CyberTAN Technology, Inc. Applicant Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. FCC ID N89-ISB7105 Manufacturer’s company CyberTAN Technology, Inc. Manufacturer Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Product Name Internet Protocal Set Top Box Basic SD/HD with WiFi Brand Name Cisco Model Name ISB7105 Test Rule Part(s) 47 CFR FCC Part 15 Subpart E § 15.407 Test Freq. Range 5150 ~ 5350MHz / 5470 ~ 5725MHz Received Date Aug. 01, 2012 Final Test Date Nov. 02, 2012 Submission Type Original Equipment Operating Mode Slave Statement Test result included is for the IEEE 802.11n (5150 ~ 5350MHz / 5470 ~ 5725MHz) of the product. The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in ANSI C63.10-2009 and 47 CFR FCC Part 15 Subpart E and KDB 789033 –20120926. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FR2O0812AB Report Format Version: 01 Page No. : i of ii FCC ID: N89-ISB7105 Issued Date :Nov. 12, 2012 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION ..................................................................................................................................... 3 3.1. Product Details ........................................................................................................................................................................................... 3 3.2. Accessories ................................................................................................................................................................................................. 5 3.3. Table for Filed Antenna ............................................................................................................................................................................. 5 3.4. Table for Carrier Frequencies ................................................................................................................................................................... 6 3.5. Table for Test Modes .................................................................................................................................................................................. 7 3.6. Table for Testing Locations........................................................................................................................................................................ 8 3.7. Table for Supporting Units ......................................................................................................................................................................... 8 3.8. Table for Parameters of Test Software Setting ....................................................................................................................................... 9 3.9. Test Configurations ................................................................................................................................................................................... 10 4. TEST RESULT ......................................................................................................................................................... 12 4.1. AC Power Line Conducted Emissions Measurement ......................................................................................................................... 12 4.2. 99% Occupied Bandwidth Measurement ............................................................................................................................................ 16 4.3. Maximum Conducted Output Power Measurement ......................................................................................................................... 26 4.4. Power Spectral Density Measurement .................................................................................................................................................. 31 4.5. Peak Excursion Measurement ................................................................................................................................................................ 37 4.6. Radiated Emissions Measurement ......................................................................................................................................................... 42 4.7. Band Edge Emissions Measurement ...................................................................................................................................................... 64 4.8. Frequency Stability Measurement ......................................................................................................................................................... 72 4.9. Antenna Requirements ........................................................................................................................................................................... 74 5. LIST OF MEASURING EQUIPMENTS .................................................................................................................... 75 6. TEST LOCATION ...............................................................................................…

Text truncated - open the document above for the full version.

SPORTON International Inc. No. 52, Hwa Ya 1st Rd., Kwei-Shan Hsiang, TaoYuan Hsien, Taiwan, R.O.C. Ph: 886-3-327-3456 / FAX: 886-3-327-0973 / www.sporton.com.tw Report Format Version: 01 FCC Dynamic Frequency Selection Test Report Applicant’s company CyberTAN Technology, Inc. Applicant Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. FCC ID N89-ISB7105 Manufacturer’s company CyberTAN Technology, Inc. Manufacturer Address 99 Park Avenue III, Science Park, Hsinchu 308 Taiwan, R.O.C. Product Name Internet Protocal Set Top Box Basic SD/HD with WiFi Brand Name Cisco Model Name ISB7105 Test Standard(s) 47 CFR FCC Part 15 Subpart E § 15.407 Test Freq. Range 5250~5350 / 5470~5725MHz Received Date Aug. 01, 2012 Final Test Date Aug. 14, 2012 Submission Type Original Equipment Operating Mode Client (without radar detection function) Statement The test result in this report refers exclusively to the presented test model / sample. Without written approval of SPORTON International Inc., the test report shall not be reproduced except in full. The measurements and test results shown in this test report were made in accordance with the procedures and found in compliance with the limit given in FCC OET Order 06-96A (2006) and 47 CFR FCC Part 15 Subpart E § 15.407. The test equipment used to perform the test is calibrated and traceable to NML/ROC. Report No.: FZ2O0812 Report Format Version: 01 Page No. : i of ii FCC ID: N89-ISB7105 Issued Date :Nov. 12, 2012 Table of Contents 1. CERTIFICATE OF COMPLIANCE ........................................................................................................................... 1 2. SUMMARY OF THE TEST RESULT ............................................................................................................................ 2 3. GENERAL INFORMATION ..................................................................................................................................... 3 3.1. Standard Requirement .............................................................................................................................................................................. 3 3.2. Product Specification Table ..................................................................................................................................................................... 3 3.3. Accessories ................................................................................................................................................................................................. 5 3.4. Table for DFS Band Carrier Frequencies ................................................................................................................................................. 5 3.5. Antenna Information on DFS Band .......................................................................................................................................................... 6 4. DFS DETECTION THRESHOLDS AND RADAR TEST WAVEFORMS .......................................................................... 7 4.1. Interference Threshold values, Master or Client incorporating In-Service Monitoring .................................................................... 7 4.2. DFS Response requirement values ...............................................................................................................…

Text truncated - open the document above for the full version.