N9Z358F11Wireless Temperature Sensor

Date: 2000-02-28 TEST REPORT Page 1 of 4 No.: HM102184 Law Man KitKitty ChoyPatrick Wong Testing EngineerVerify byPatrick Wong for Managing Director APPLICANT: (CODE : EWI001) EWIG INDUSTRIES CO. LTD. 13/F.,Houtex Ind’l Bldg., 16 Hung To Road, Kwun Tong, Kowloon, HONG KONG. DATE OF SAMPLES RECEIVED: 2000-02-03 TEST DURATION 2000-02-25 DESCRIPTION OF SAMPLE(S): A sample of product said to be: Product:Wireless IN/OUT Temperature Manufacturer:EWIG MFG. CO., LTD Model Number:358F11 Brand Name:N/A Rating:3Vd.c., 0.005A, 0.015W Origin:China INVESTIGATIONS REQUESTED: Measurement to the relevant clauses of F.C.C. Rules and Regulations Part 15 Subpart B - Unintentional Radiator. RESULT/ REMARK: Please see attached sheet(s). CONCLUSION: From the measurement data obtained, the tested sample was considered to have COMPLIED with the clause 15.109(a) for the Receiver Section of Federal Communication Rules and Regulation Part 15 and ANSI C63.4-1992 Section 12.1.1.1-2. TEST EQUIPMENT AUDIT: Please see Appendix A Date: 2000-02-28 TEST REPORT Page 2 of 4 No.: HM102184 T E S T S U M M A R Y (A)Measurement of Radiated Emissions ..............................................Satisfactory (B)Line Conducted Voltage Test. ........................................................Not applicable T E S T D A T A Please refer to the attached result sheets. Date: 2000-02-28 TEST REPORT Page 3 of 4 No.: HM102184 *** RECEIVER SECTION *** (A) Measurement of Radiated Interference TEST REFERENCE: FCC Rules Part 15 Subpart B section 15.109(a) TEST CONDITION : Normal TEST DATE : 2000.02.25 Emission Frequency Meter Reading PolarizationAntenna Factor Field Strength (at 3m) FCC Limit MHz dB(μV) H-VdB dB(μV/m)μV/mμV/m 433.619.5H+19.539.089.1200.0 867.2<1.0+28.5<29.5<29.9200.0 1300.8<1.0+25.8<26.8<21.8500.0 1734.4<1.0+26.2<27.2<22.9500.0 2168.0<1.0+28.0<29.0<28.2500.0 2601.5<1.0+28.5<29.5<29.9500.0 3035.1<1.0+30.6<31.6<38.0500.0 3468.7<1.0+32.0<33.0<44.7500.0 3902.3<1.0+33.2<34.0<51.2500.0 4335.9<1.0+33.3<34.3<51.9500.0 ============SUMMARY=========== All data is within limits ============================================================== Broad-band Antennas were used and both polarizations of emissions were measured Polarizations at highest reading indicated as: H -- HorizontalV -- Vertical ============================================================== Date: 2000-02-28 TEST REPORT Page 4 of 4 No.: HM102184 NOTES FOR THE RADIATION MEASUREMENT (1) Test site facility: Open field test site located at Taipo (Hong Kong) with a metal ground plane on filed with the FCC pursuant to section 2.948 of the FCC Rules. (2) Distance between the ET and measuring antenna: 3 meters. (3) Measuring instrumentations: CISPR Quasi-peak type field strength meter (25 MHz - 1000 MHz and 1GHz-18GHz ).6dB bandwidth set at 120KHz. Also, peak level of the fundamental emissions was measured in order to determine compliance with the 20dB peak to average limit specified in Section 15.231 of the FCC new Rules. (4) Measuring antenna: Broad band antenna for the frequency range 25-1000 MHz, connected with 10 meters coaxial cable.Horn antenna for the frequency range 1-18 GHz, connected with high frequency coaxial cable.Cable loss of the coaxial cable. Cable included in the Antenna Factor for measurement data. The antenna are capable of measuring both horizontal and vertical polarizations. (5) Frequency range scanned: The frequency range from 25 MHz to 1000 MHz had been searched. Readings of the highest emissions relating to the limit were reported as above. (6) Arrangement of EUT: During the test, the sample was operated at rated supply voltage and arranged for maximum emissions. (7) Measuring Procedure: In accordance with the relevant clauses of the FCC Rules Part 15 section 15.109(a) and ANSI C63.4:1992 section 12.1.1.1-2. For superregenerative receivers, an independent signal generator had been used to radiated an unmodulated were (cw) signal to the receiver at its operating frequency in order to “cohere” or resolve the individual components of the characteristic broadband emission from such a receiver. The level of such signal may need to be adjusted in order to accomplish this. (8) Measuring Uncertainty: The calculated uncertainty for measurement performed at 3M test distance are:- 30MHz to 300MHz = ± 3.7dB, 300MHz to 1000MHz = + 3.0dB/-2.7dB. 1GHz to 18GHz = +3.3dB/-3.4dB. Remark: Purpose of this test is to provide the Applicant with the necessary test data of their device for the submission to FCC with application for Equipment Authorization under FCC’s Equipment Authorization Program. This test itself is not an Approval Test. *** End of Document ***

Date: 2000-02-28 TEST REPORT Page A1 of A1 No.: HM102184 APPENDIX A TEST EQUIPMENT AUDIT Radiated Emission EQP NO.DESCRIPTIONMANUFACTURERMODEL NO.SERIAL NO.LAST CAL. EM007SPECTRUM ANALYZERHEWLETT PACKARDHP85660B3144A2119211/06/99 EM008SPECTRUM ANALYZER DISPLAYHEWLETT PACKARDHP85662A3144A2051411/06/99 EM009QUASI PEAK ADAPTORHEWLETT PACKARDHP85650A3303A0170211/06/99 EM010RF PRESELECTORHEWLETT PACKARDHP85685A3221A0141011/06/99 EM011ATTENNUATOR/SWITCHHEWLETT PACKARDHP11713A2508A1059511/06/99 EM012PRE-AMPLIFIERHEWLETT PACKARDHP8449B3008A0026211/06/99 EM013CONTROLLER (COMPUTER), COLOR MONITOR, KEYBOARD & MOUSE FLOPPY DRIVE HEWLETT PACKARD HEWLETT PACKARD HEWLETT PACKARD HP9000 HP A1097C HP9133L 6226A60314 3151J39517 2623A02468 CM EM017ANTENNAARA INC.LPB-2513/A106917/02/00 EM072SIGNAL GENERATORHEWLETT PACKARD8640B1948A1189230/03/98 EM083HKSTC OPEN AREA TEST SITEHKSTCN/AN/A25/02/99 EM145EMI TEST RECEIVERR & SESCS 30830245/02110/05/99 Remarks:- CMCorrective Maintenance N/ANot Applicable or Not Available TBDTo Be Determined