NCG-MC12.4GHz PIR Activated Lighting Camera System

TXMC01 RxRMC1 2.4GHz PIR ACTIVATED LIGHTING CAMERA SYSTEM PIR LIGHTING CAMERA c Floodlight d Tempered Glass e Wiring Box f Adjusting Screw g Lens h PIR Motion Sensor i Antenna j Channel Selection Switch k Lux Adjustment l Time Adjustment  Backplate (valid for European version) INTRODUCTION Your EVERSPRING 2.4GHz PIR ACTIVATED LIGHTING CAMERA SYSTEM is a unique surveillance system for your home or business operating at 2.4GHz. The system includes a PIR LIGHTING CAMERA and a Wireless Receiver. Using the Wireless Receiver as a bridge to connect to TV will see and hear real-time video images at all times. At night, the built-in passive infrared (PIR) motion sensor turns on the floodlight when it detects motion in its coverage area, so that camera images can be clearly seen on the TV for improved night time vision. During the day, the built-in photocell sensor saves electricity by deactivating the floodlight. A 4-position time adjustment switch lets you select how long the floodlight will stay on after activation. Adjustable 4-channel avoids interference. Two operation options let you choose: Automatic Operation or Manual Override. Note: Read this entire manual before you start to install the system. SAFETY PRECAUTIONS z Do not install the PIR LIGHTING CAMERA when it is raining. z Be sure to switch off power source before installing. z Make sure that the power wiring comes from circuit with an external 16A miniature circuit breaker for the short circuit protection or a suitable fuse. z Keep minimum 0.8m away from the lighted objects. z The adjusting screw shall not be removed. Tighten the connection of the floodlight head assembly and motion sensor to the base so as to avoid any rotation. z The unit is wall and ceiling mountable.(FIGURE 1) FIGURE 1 z When mounting on the wall, it can be installed only vertically (FIGURE 2a), not horizontally (FIGURE 2b). VERTICAL HORIZONTAL FIGURE 2a & 2b z The distance between floodlight and PIR Camera cannot be too close to avoid the heat from the floodlight being hindered the normal operation of PIR Camera. (FIGURE 3) FIGURE 3 1 z The adjustable angle for the floodlight and PIR Camera can be 45° leftward and rightward. (FIGURE 4) FIGURE 4 z The suggested swiveling angle of floodlight and PIR Camera are outlined hereunder: (FIGURE 5) Wall mount Ceiling mount FIGURE 5 IMPORTANT Installation must be performed by skilled technicians who are informed about the standards and technical requirements of the appliance and its proper installation. Maintenance or repairing work such as replacing current fuse shall be done by a qualified electrician or technician. Before proceeding with the installation, TURN OFF THE POWER TO THE LIGHTING CIRCUIT AT THE CIRCUIT BREAKER OR FUSE BOX TO AVOID ELECTRICAL SHOCK. CHOOSING A MOUNTING LOCATION z For the best results, fix your PIR LIGHTING CAMERA on a solid surface, 2M above the ground. z For outdoor installation, a location under eaves is preferable. z Avoid aiming the motion sensor at pools, heating vents, air conditioners or objects that may change temperature rapidly. z Do not allow sunlight to fall directly on the front of unit. z Try to avoid pointing the unit at trees or shrubs or where the motion of pets may be detected. z The transmission range to the Wireless Receiver is up to 100m in clear line of sight. z Prior to mounting, keep in mind that the motion sensor is more sensitive to the motion, which is across the detection field and less sensitive to the motion, which moves directly towards the detector (FIGURE 6). 2 SENSOR SENSOR LESS SENSITIVE MORE SENSITIVE SENSITIVITY TO MOTION FIGURE 6 BULB INSTALLATION CAUTION: Always handle halogen bulbs with a soft cloth. Do not touch the bulb with your bare hand as it will shorten the life of the bulb. (1) Do not touch the floodlight while it is in use or still hot. Allow it to cool off (about 5 minutes) before touching it. (2) Do not use halogen bulb rated higher than 150 watts. (3) Disconnect the power cord or wall switch. (4) Unscrew the screw at the bottom of floodlight (FIGURE 7). FIGURE 7 (5) Install bulb by inserting one end first and depressing until enough clearance is gained to seat the other end of the socket. Rotate halogen bulb to assure proper seating. (6) Carefully replace the front surround and make sure that the seal is correctly positioned and then screw up tightly. INSTALLATION To facilitate installation, it is essential to get a drill and a screwdriver ready. Select a location for the unit based on the coverage angles shown in FIGURE 8. FIGURE 8 90¢X 90¢X 3 Install a wall switch adjacent to the power source. (FIGURE 9). This will help you operate this PIR LIGHTING CAMERA with ease. See OPERATION for further information. European Version American Version FIGURE 9 WIRING INSTRUCTION European Version (1) Switch off the power source or wall switch (2) Detach the wiring box from the backplate. (3) Use a flat blade screwdriver to break a hole on the rubber gasket. Route the power cord through the rubber gasket and strain relief by fastening the power cord with two screws provided.(FIGURE 10) R FIGURE 10 4 (4) Using the backplate as a template to mark the position of two fixing holes on the wall. Drill these two holes by inserting the plastic wall plugs supplied. Fix the backplate using the two screws provided. (FIGURE 11) FIGURE 11 (4) Connect the BROWN wire (Live wire) to the terminal block “L” mark. Connect the BLUE wire (Neutral wire) to the terminal block “N” mark. Connect the YELLOW/GREEN (Ground wire) to the terminal block “ “mark. (FIGURE 12). FIGURE 12 (5) Place the wiring box to the backplate using screws provided. (FIGURE 13) FIGURE 13 5 American Version (1) Switch off the power source or wall switch. (2) Line up the holes on the mounting bracket with the holes on your junction box. Using fitting screws (depending on size of the holes in your junction box), attach the mounting bracket to your junction box. (FIGURE 14). FIGURE 14 (3) Place the gasket…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: FNCG-MC1 Date of Issue: Dec. 6, 2006 PHOTOGRAPHS OF EUT Page 1 Total Page: 13 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 2 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 3 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 4 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 5 Rev. 00

Label Location Cooper Lighting Model: MC1 FCC ID: NCG-MC1 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 20mm 40mm

Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 6 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 7 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 8 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 9 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 10 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 11 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 TX IC U2 S7503A-TXIC Page 12 Rev. 00 Compliance Certification Services Inc. Refer No: 60904202-RP1 Report No: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 2006 Page 13 Rev. 00

Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 FCC 47 CFR PART 15 Subpart C TEST REPORT For 2.4GHz PIR ACTIVATED LIGHTING CAMERA SYSTEM Model Number: MC1 Trade Name: Cooper Lighting Issued to Cooper Lighting 1121 Highway 74 South Peachtree City, GA 30269 Issued by Compliance Certification Services Inc. No. 81-1, Lane 210, Pa-Da 2nd Road,, Luchu Hsiang, Taoyuan Shien, (338) Taiwan, R.O.C. http://www.ccsemc.com.tw [email protected] Note: This report shall not be reproduced except in full, without the written approval of Compliance Certification Services Inc. This document may be altered or revised by Compliance Certification Services Inc. personnel only, and shall be noted in the revision section of the document. Page 1 Total Page: 29 Rev. 00 Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 TABLE OF CONTENTS 1. TEST RESULT CERTIFICATION.................................................................................................3 2. EUT DESCRIPTION.......................................................................................................................4 3. TEST METHODOLOGY................................................................................................................5 3.1 EUT CONFIGURATION.................................................................................................................5 3.2 EUT EXERCISE.............................................................................................................................5 3.3 GENERAL TEST PROCEDURES......................................................................................................5 3.4 FCC PART 15.205 RESTRICTED BANDS OF OPERATIONS.................................................6 3.5 DESCRIPTION OF TEST MODES....................................................................................................6 4. INSTRUMENT CALIBRATION....................................................................................................7 4.1 MEASURING INSTRUMENT CALIBRATION...............................................................................7 4.2 MEASUREMENT EQUIPMENT USED..................................................................................7 5. FACILITIES AND ACCREDITATIONS.......................................................................................9 5.1 FACILITIES ..................................................................................................................................9 5.2 EQUIPMENT................................................................................................................................. 9 5.3 TABLE OF ACCREDITATIONS AND LISTINGS..............................................................................10 6. SETUP OF EQUIPMENT UNDER TEST....................................................................................11 6.1 SETUP CONFIGURATION OF EUT................................................................................................11 6.2 SUPPORT EQUIPMENT ........................................................................................................11 7. FCC PART 15.249 REQUIREMENTS.........................................................................................12 7.1 BAND EDGES MEASUREMENT.........................................................................................12 7.2 SPURIOUS EMISSION..........................................................................................................18 7.3 POWERLINE CONDUCTED EMISSIONS...........................................................................25 8. APPENDIX 1 -- PHOTOGRAPHS OF TEST SETUP .................................................................28 Page 2 Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 Page 3 1. TEST RESULT CERTIFICATION Applicant: Cooper Lighting 1121 Highway 74 South Peachtree City, GA 30269 Equipment Under Test: 2.4GHz PIR ACTIVATED LIGHTING CAMERA SYSTEM Trade Name: Cooper Lighting Model Number: MC1 Date of Test: Sep. 6 ~ 9, 2006 APPLICABLE STANDARDS STANDARD TEST RESULT FCC 47 CFR Part 15 Subpart C No non-compliance noted We hereby certify that: The above equipment was tested by Compliance Certification Services Inc. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in ANSI C63.4: 2003 and the energy emitted by the sample EUT tested as described in this report is in compliance with the requirements emission limits of FCC Rules Part 15.107, 15.109,15.207, 15.209 and 15.249. The test results of this report relate only to the tested sample identified in this report. Approved by: Reviewed by: Jim Chang Susan Su Section Manager Section Manager Compliance Certification Services Inc. Compliance Certification Services Inc. Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 2. EUT DESCRIPTION Product 2.4GHz PIR ACTIVATED LIGHTING CAMERA SYSTEM Trade Name Cooper Lighting Model Number MC1 Model Discrepancy N/A Power Adapter Manufacturer N/A Model MW35-0900300 Power Adapter Power Rating I/P: 120VAC, 60Hz O/P: DC 9V, 0.3A DC Power Cable Unshielded, 1.8m (Non-detachable) at Power Adapter Frequency Range 2413MHz, 2432MHz, 2451MHz, 2470MHz Modulation Technique FSK Antenna Gain 2.1dBi Antenna Designation Dipole Antenna Remark: 1. The sample selected for test was production product and was provided by manufacturer. 2. This submittal(s) (test report) is intended for FCC ID: NCG-MC1 filing to comply with Section 15.107 & 15.109 (FCC Part 15, Subpart B) and Section 15.207, 15.209, 15.249 (FCC Part 15, Subpart C Rules.) Page 4 Compliance Certificat…

Text truncated - open the document above for the full version.

Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 8. APPENDIX 1 -- PHOTOGRAPHS OF TEST SETUP Radiated Emission Set up Photos Page 28 Compliance Certification Services Inc. Refer No.: 60904202-RP1 Report No.: 61130203-RP1-1 FCC ID: NCG-MC1 Date of Issue: Dec. 6, 0006 Power line Conducted Emissions Setup Photos Page 29