NDATE3XUUHF TRANSMITTER

Models : TE-310 16KEY Transmitter VHF UHF Transmitter Product Name : Transmitter Models : TE-310 GOLD APOLLO CO., LTD. Rm 1, 3th F1.,No .77, Secretary. 1 , Hsin Tai Wu .,Rd., Hsi-Chih Hsien, Taiwan, R. O. C. Tel : 886-2-2698-8888 Web site : http\\www.apollo.com Models : TE-310 16KEY Transmitter VHF UHF Transmitter Product Name : Transmitter Models : TE-310 GOLD APOLLO CO., LTD. Rm 1, 3th F1.,No .77, Secretary. 1 , Hsin Tai Wu .,Rd., Hsi-Chih Hsien, Taiwan, R. O. C. Tel : 886-2-2698-8888 Web site : http\\www.apollo.com A t t e n t i o n TE-310 Transmitter is used to page guests or staffs in a limited area, especially suitable for factory, restaurant and hospital. The operation is simple and friendly to keep good communication with your guests and staffs. There are 19 push buttons for your choice. Each button is able to independently page a single person and also available to page more than one person at the same time, as well. In addition, it has the flash light as a reminder and also can repeat paging the guests/staffs automatically when the one you page has not shown up. Transmitter Be aware at following situations ,which will help to extend the life cycle of transmitter. NDon't change transmitter or tamper with its original appearance. NDon't put transmitter close to a heat source or in light direct sun. NDon't put transmitter in dust , moisture or on uneven surface. NDon't soak transmitter into the water. NNever operate the device with out the correct Gold Apollo antenna , or a suitable artificial load , connected. Function \ Location F u n c t i o n \ L o c a t i o n PWRTX F3F2F1 19 102 311 12 4 5 13 614 15 7 816 1. Antenna Connect (BNC 50 ohm) 2. Power Connect (8.4V/1.5A) 3. RS232 D-SUB (FEMALE 9PIN) 1 2 3 Outlook 2.PWR(Orange) Power LED 1.TX (Rad) Transmit LED 12 4 4. RJ-11 Telephone Jack To Cancer parer. A t t e n t i o n TE-310 Transmitter is used to page guests or staffs in a limited area, especially suitable for factory, restaurant and hospital. The operation is simple and friendly to keep good communication with your guests and staffs. There are 19 push buttons for your choice. Each button is able to independently page a single person and also available to page more than one person at the same time, as well. In addition, it has the flash light as a reminder and also can repeat paging the guests/staffs automatically when the one you page has not shown up. Transmitter Be aware at following situations ,which will help to extend the life cycle of transmitter. NDon't change transmitter or tamper with its original appearance. NDon't put transmitter close to a heat source or in light direct sun. NDon't put transmitter in dust , moisture or on uneven surface. NDon't soak transmitter into the water. NNever operate the device with out the correct Gold Apollo antenna , or a suitable artificial load , connected. Function \ Location F u n c t i o n \ L o c a t i o n PWRTX F3F2F1 19 102 311 12 4 5 13 614 15 7 816 1. Antenna Connect (BNC 50 ohm) 2. Power Connect (8.4V/1.5A) 3. RS232 D-SUB (FEMALE 9PIN) 1 2 3 Outlook 2.PWR(Orange) Power LED 1.TX (Rad) Transmit LED 12 4 4. RJ-11 Telephone Jack To Cancer parer. 25 O p e r a t i o n 1. Frequency range : 147~170MHz, 450~470MHz. 2. Modulation Type : F S K 3. Channel spacing : 12.5 / 25MHz 4. Output power (ERP): 1W 5. Maximum deviation: +/-4.5KHz 6. Harmonic Radiation : less - 25dBm 7. Frequency stability : 2.5ppm at -10C~60C 8. Output Connect : BNC (F) 9. Current Consumption : Standby : 100mA ; Transmit : 400mA 7. Dimensions : 23.2 (W)*50 (H)*17(D) 8. Weight : 650g ( No Antenna ) S y s t e m S p e c i f i c a t i o n s Sy ste m Sp ec ific at ion s IN ST RU CT IO N FO R O PE RA TIO N : 1.Activate paging: Press any button among these 50 push buttons, the light will flash and enter active mode, then send the signal out. uTo repeat paging : In the active mode, it can be programmed to send the same message every 30 sec. or 45 sec, or 60 sec, or 2 minutes, or 5 minutes or continuo vTo page more than one person : More than one button can be activated at the same time to page more than one person. wLED Sign Display: It's an option on the software. When the button is pressed, it will activate to send the signal and show the number on the LED Display at the same time. The numbers on the Display will be arranged by sequence, the first number always shows up firstly. , 30 minutes , 25 O p e r a t i o n 1. Frequency range : 147~170MHz, 450~470MHz. 2. Modulation Type : F S K 3. Channel spacing : 12.5 / 25MHz 4. Output power (ERP): 1W 5. Maximum deviation: +/-4.5KHz 6. Harmonic Radiation : less - 25dBm 7. Frequency stability : 2.5ppm at -10C~60C 8. Output Connect : BNC (F) 9. Current Consumption : Standby : 100mA ; Transmit : 400mA 7. Dimensions : 23.2 (W)*50 (H)*17(D) 8. Weight : 650g ( No Antenna ) S y s t e m S p e c i f i c a t i o n s Sy ste m Sp ec ific at ion s IN ST RU CT IO N FO R O PE RA TIO N : 1.Activate paging: Press any button among these 50 push buttons, the light will flash and enter active mode, then send the signal out. uTo repeat paging : In the active mode, it can be programmed to send the same message every 30 sec. or 45 sec, or 60 sec, or 2 minutes, or 5 minutes or continuo vTo page more than one person : More than one button can be activated at the same time to page more than one person. wLED Sign Display: It's an option on the software. When the button is pressed, it will activate to send the signal and show the number on the LED Display at the same time. The numbers on the Display will be arranged by sequence, the first number always shows up firstly. , 30 minutes , C o n t r o l b u t t o n s 2.Stop paging: In the active mode or Time out mode, pressing the same button again to stop paging, at the same time the repeating and the number on the LED sign will be cancelled. 3."Time out" Message display: Once the option of "Time Out " message display is enable, the button will be flash after being pressed for a certain time, and will also sen…

Text truncated - open the document above for the full version.

M16C/60 16-bit signal-chip MicroComputer 19 key matrix & 19 LED matrix External FLASH, SRAM memory Power & Reset IC Buzzer RS-232 interface TE-310 BLOCK DIAGRAM OF DIGITAL BOARD 1.MCU: Mitsubishi 16-bit single-chip microcomputer M16C/ 60 family M30620 is packaged in a 100-pin plastic molded QFP and featured the serial I/O, DMAC, with 1M bytes of address space. The main clock is 4.9152MHz and the sub- clock is 32.768KHz. There have RF control port for generating the control signals and POCSAG encoded data to RF circuit. 2.External memory: There include FLASH and SRAM, the former is for storing main firmware program and pager RF control port

LABEL Format: LABEL Size: 60x 42 mm LABEL Position: LABEL

LABEL Format: LABEL Size: 60x 42 mm LABEL Position: LABEL

金阿波羅股份有限公司 GOLD APOLLO CO; LTD. Rm 1,3rd F1; No. 77 Sec. 1,Hsin Tai Wu Rd; His-Chih,Taipei Hsien, Taiwan,R.O.C. TEL: (886)-2-2698-8888. FAX:(886)-2-2698-1750 Website : www.gapollo.com MODEL: FREQUENCY: RF _PCB VERSION: APPROVED DATE : DIGIT _PCB VERSION: 07/28/2005 GOLD APOLLO Service Manual TE310 450-470Mhz TE100RFV130 VER:6.0 TE-310MAIN DIGIT VER1.1 VER:1.1 Apollo Gold Apollo Co.,Ltd General Trouble shooting Flow chart No Yes No Yes Turn power on Regulator voltage ok? Encoded Data ok? Perform Encoded Data checks Turn power off Repair Repair Start Stop M16C/60 16-bit signal-chip MicroComputer 19 key matrix & 19 LED matrix External FLASH, SRAM memory Power & Reset IC Buzzer RS-232 interface TE-310 BLOCK DIAGRAM OF DIGITAL BOARD 1.MCU: Mitsubishi 16-bit single-chip microcomputer M16C/ 60 family M30620 is packaged in a 100-pin plastic molded QFP and featured the serial I/O, DMAC, with 1M bytes of address space. The main clock is 4.9152MHz and the sub- clock is 32.768KHz. There have RF control port for generating the control signals and POCSAG encoded data to RF circuit. 2.External memory: There include FLASH and SRAM, the former is for storing main firmware program and pager RF control port database, the latter is for saving temporary variable during program is running. 3.Power & Reset IC: There is Regulator 7805 to convert external plug-in DC power into 5-V for whole system. The Reset IC is a voltage detector. When voltage rising above the trigger voltage, it will send out Reset signal to MCU. 4.19 Key Matrix and 19 LED matrix: There have 19 keys at the front panel of the case, marked number from 1 to 16, and F1,F2,F3, each company with one LED to indicate the status of operation. 5.Buzzer: The key tone is generated from buzzer. 6.RS-232 interface: It used for communicating with PC's programming software, we can write some parameter into TE-300 like CAPSCODE, baud rate, function.. te310_V110.sch-1 - Tue Apr 19 10:49:54 2005 te310_V110.sch-2 - Tue Apr 19 10:50:00 2005 TE310 DIGIT PCB V-1.10 DATE : APR,4/2005 Item Part NameDescriptionQty ReferenceMfg. 1LM7805正電壓 1A 穩壓IC, TO-220 1 U1 2M30620M8-3M30620M8A-2N1GP1U2 3 UT62L2568256K X 8 SRAM1U3 4 HIN232ACBRS232 DRIVER/RECEIVER S1U4 5 XC6201P332P Voltage Regulator, SOT-89 1 U5 6 74HC1383-8 LINE DECODER2 U6,U12 7 A29L004UL 512K X 8 BIT FLASH1 U7 8 RN5VD24AA Voltage Detector1 U9 8A ISL8485ECB-TRS-485 TRANSCEIVERS1U10 9 XC221A1100M CMOS OP AMP SOT-252 U13,U14 10 2SA1362GR PNP Transistor12 Q1~Q3,Q9~ Q16,Q18 11 DTA114YUA Switch Transistor(PNP)1 Q5 12 BUZZERBUZZER,AS-1201E-RPB,12m m1B1 13 E/C-6.36.3mm E-CAP, 47u/25V1 C1 14 CAP0603470p2 C2,C3 15 CAP06031u1C4 16 CAP06030.1u13 C5~C7,C9, C14,C16, C17,C23, C24,C26~ C29 17 CAP060356p2 C10,C11 18 CAP060312p2 C12,C13 19C/C10u/16V (A)7 C15,C18~ C22,C38 20 CAP0603220p2 C25,C35 21 CAP060382p1 C36 22 CAP0603180p1 C37 23 CON/DBRA-9PIN-F 9 PIN D-Sub connector1 J1 24 CON-SIP-100MIL-4PRJ-11 TELEPHONE JACK1J2 25 CON-SIP-2.0MM-8P connector patch 2.0mm1 J4 26 CON-SIP-2.00MM-6 Pconnector patch 2.0mm1 J5 27 JACK-DJ0702 DC POWER JACK1 J8 28 LED(YELLOW) LT5K33-AA-UC9T-T0120 D1~D19, D103 TE-310 TRANSMITTER B.O.M. 29 TVS SMBJ18A TRANSIENT VOLTAGE SUPPRESSOR1 D102 30 LED(RED)LT5K13-AA-UC9T-T011 D104 31 1N4148Switch Diode2 D105,D106 32 RES060310K10 R2~R4,R25, R26,R35, R37,R41, R49,R8 33 RES0603120R3R1,R5,R6 34 RES06033K33 R11~R13 35 RES06030R8 R18~R24, R36 36 R060362K1 R27 37 R0603160K1 R28 38 R0603100K1 R29 39 R060351K1 R30 40 R0603*R31 41 R0603*R32 42 R06031K4 R33,R42~ R44 43 R060315K1 R34 44 RES0603330R2 R39,R40 45 RES060322K1 R50 46 XTAL-HC-49/U CRYSTAL 4.9152mHz1 Y1 47 XTAL-2X6MM CRYSTAL 32.768KHz1 Y2 48PCBTE-310MAIN DIGIT VER1. 11 49PLCC 32 SMD SOCKET 1for U7 1 打件時U7位置使用PLCC 32 SMD SOCKET, FLASH IC待燒碼後再插入此SOCKET中 TE100RF Alignment procedure First programming frequency to “460.000MHz”. A. VCO SECTION 1.VCO voltage. I. Let transmitter in TEST mode. II. Check “VCO” point adjust C20 for 1.5V +/- 0.05V B. FREQUENCY SYNTHESIZER & MODULATOR 1.TX frequency I.Let transmitter in TEST mode. II. Adjust C4 for TX CF=460.000MHz +/- 200Hz. 2. TX FM deviation I.Let transmitter in TEST mode. II. Adjust R22 for TX FM deviation 2.0kHz. III. Adjust R23 to make modulation waveform like square wave. IV.Adjust C4 for TX CF=460.000MHz +/- 200Hz. ร1଄ ٥4଄ MODEL:TE100RF UHF 1WDATE:ֲ8ִ5ڣ3005 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote C1470pCAP 0603 C1068pCAP 0603 C110.01uCAP 0603 C1210u4VTANCAP "A" C13100pCAP 0603 C14100pCAP 0603 C15100pCAP 0603 C160.1uCAP 0603 C171.5pCAP 0603 C18220pCAP 0603 C191uCAP 0603 C210pCAP 0603 C202-6pTrimmer Cap Size 3mm C21*CAP 0603 C225.6pCAP 0603 C23100pCAP 0603 C246.8pCAP 0603 C252.2pCAP 0603 C26470pNPOCAP 0603 C270.5pCAP 0603 C28*CAP 0603 C29470pNPOCAP 0603 C310pCAP 0603 C3010u4VTANCAP "A" C310.01uCAP 0603 C321000pCAP 0603 C3322pN750PHILIPS 負溫度係數電容 C341.5pCAP 0603 C35*CAP 0603 C364.7pCAP 0603 C37470pNPOCAP 0603 C38470pNPOCAP 0603 C39470pNPOCAP 0603 C43-10pTrimmer Cap Size 3mm C4039pCAP 0603 C41*CAP 0603 C4222kRES 0603 C43470pNPOCAP 0603 C43A0.01uX7RCAP 0603 C44470pNPOCAP 0603 C45470pNPOCAP 0603 C46*CAP 0603 C46A*CAP 0603 C472.7pCAP 0603 C47A5.6pCAP 0603 C483.9pCAP 0603 C4947u10VTANCAP "B" C50.47uCAP 0603 C504.7pCAP 0603 C5110pCAP 0603 C5210pCAP 0603 C534.7pCAP 0603 C541uCAP 0603 C551uCAP 0603 C5610u4VTANCAP "A" ร2଄ ٥4଄ MODEL:TE100RF UHF 1WDATE:ֲ8ִ5ڣ3005 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote C5710u4VTANCAP "A" C5810u4VTANCAP "A" C59470pCAP 0603 C622u4VTANCAP "A" C60*CAP 0603 C61*CAP 0603 C62*CAP 0603 C63470pNPOCAP 0603 C64*CAP 0603 C65470pNPOCAP 0603 C66*CAP 0603 C67*CAP 0603 C681000pCAP 0603 C69*Trimmer Cap Size 3mm C70.047uCAP 0603 C70*CAP 0603 C710.01uCAP 0603 C7247pCAP 0603 C73470pNPOCAP 0603 C7418pCAP 0603 C75*CAP 0603 C81uCAP 0603 C91uCAP 0603 D11SV270TOSHIBA Variable capacitance diode D21SV270TOSHIBA Variable capacitance diode D31SV270TOSHIBA Variable capacitance diode D4*TOSHIBA Variable capacitance dio…

Text truncated - open the document above for the full version.

第1頁 共4頁 MODEL:TE100RF UHF 1WDATE:2004年4月7日 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote C1470pCAP 0603 C1068pCAP 0603 C110.01uCAP 0603 C1210u4VTANCAP "A" C13100pCAP 0603 C14100pCAP 0603 C15100pCAP 0603 C160.1uCAP 0603 C171.5pCAP 0603 C18220pCAP 0603 C191uCAP 0603 C210pCAP 0603 C202-6pTrimmer Cap Size 3mm C21*CAP 0603 C225.6pCAP 0603 C23100pCAP 0603 C246.8pCAP 0603 C252.2pCAP 0603 C26470pNPOCAP 0603 C270.5pCAP 0603 C28*CAP 0603 C29470pNPOCAP 0603 C310pCAP 0603 C3010u4VTANCAP "A" C310.01uCAP 0603 C321000pCAP 0603 C3322pN750PHILIPS 負溫度係數電容 C341.5pCAP 0603 C35*CAP 0603 C364.7pCAP 0603 C37470pNPOCAP 0603 C38470pNPOCAP 0603 C39470pNPOCAP 0603 C43-10pTrimmer Cap Size 3mm C4039pCAP 0603 C41*CAP 0603 C4222kRES 0603 C43470pNPOCAP 0603 C43A0.01uX7RCAP 0603 C44470pNPOCAP 0603 C45470pNPOCAP 0603 C46*CAP 0603 C46A*CAP 0603 C472.7pCAP 0603 C47A5.6pCAP 0603 C483.9pCAP 0603 C4947u10VTANCAP "B" C50.47uCAP 0603 C504.7pCAP 0603 C5110pCAP 0603 C5210pCAP 0603 C534.7pCAP 0603 C541uCAP 0603 C551uCAP 0603 C5610u4VTANCAP "A" 第2頁 共4頁 MODEL:TE100RF UHF 1WDATE:2004年4月7日 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote C5710u4VTANCAP "A" C5810u4VTANCAP "A" C59470pCAP 0603 C622u4VTANCAP "A" C60*CAP 0603 C61*CAP 0603 C62*CAP 0603 C63470pNPOCAP 0603 C64*CAP 0603 C65470pNPOCAP 0603 C66*CAP 0603 C67*CAP 0603 C681000pCAP 0603 C69*Trimmer Cap Size 3mm C70.047uCAP 0603 C70*CAP 0603 C710.01uCAP 0603 C7247pCAP 0603 C73470pNPOCAP 0603 C7418pCAP 0603 C75*CAP 0603 C81uCAP 0603 C91uCAP 0603 D11SV270TOSHIBA Variable capacitance diode D21SV270TOSHIBA Variable capacitance diode D31SV270TOSHIBA Variable capacitance diode D4*TOSHIBA Variable capacitance diode D5*TOSHIBA Switch Diode J2PTFY-08S-B-024PLASTRON connector patch 2.0mm J3PTFY-06S-B-024PLASTRON connector patch 2.0mm L1CREM1008R02222nHCLIDER Air Coil 1008 L10CREM1008R02727nHCLIDER Air Coil 1008 L11CREM1008R05656nHCLIDER Air Coil 1008 L12CREM1008R8N28.2nHCLIDER Air Coil 1008 L13CREM1008R02222nHCLIDER Air Coil 1008 L14CREM1008R02222nHCLIDER Air Coil 1008 L15CREM1008R02222nHCLIDER Air Coil 1008 L1615nHSPI IND 0603 L2100nHSPI IND 0603 L31uHSWI IND 1008 L415nHSPI IND 0603 L515nHSPI IND 0603 L68.2nHSWI IND 0805 L7100nHSWI IND 0805 L80.47RES 0603 L90RES 0603 PCB1TE100RFV130 4 Layer thicknes=1.2mm SHIN PUU Printing Circuit Board Q12SC4226R25NEC RF Transistor Q10DTC114YUAROHM Switch Transistor (NPN) with resistor Q11*ROHM Switch Transistor (PNP) with resistor Q12*ROHM Switch Transistor (NPN) with resistor Q14DTC114YUAROHM Switch Transistor (NPN) with resistor Q152SC4226R25NEC RF Transistor Q22SC4226R25NEC RF Transistor Q32SC4226R25NEC RF Transistor 第3頁 共4頁 MODEL:TE100RF UHF 1WDATE:2004年4月7日 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote Q42SC3356R25NEC RF Transistor Q5NE5500179ANEC RF POWER MOS FET Q6BC847BWPHILIPS NPN AF TRANSISTOR Q7DTA114YUAROHM Switch Transistor (PNP) with resistor Q8*PHILIPS NPN AF TRANSISTOR Q9*PHILIPS NPN medium power transistor R147RES 0603 R103.3kRES 0603 R113.3kRES 0603 R12100RES 0603 R13150kRES 0603 R1447RES 0603 R1515kRES 0603 R1622kRES 0603 R1747RES 0603 R1847kRES 0603 R19*RES 0603 R2120RES 0603 R20330RES 0603 R21100RES 0603 R2220kSMD SVR R2320kSMD SVR R2447kRES 0603 R25*RES 0603 R26100RES 0603 R2710RES 0603 R284.7kRES 0603 R291kRES 0603 R35.6kRES 0603 R3010kRES 0603 R312.2kRES 0603 R320RES 0603 R33*RES 0603 R340RES 0603 R350RES 0805 R36*RES 0805 R37*RES 0603 R380RES 0805 R393.3kRES 0603 R447RES 0603 R40*SMD SVR R41*RES 0603 R421kRES 0603 R4333RES 0603 R4433RES 0603 R451kRES 0603 R461kRES 0603 R470RES 0603 R48150RES 0603 R49680RES 0805 R5100kRES 0603 R502.2kRES 0603 R511kRES 0603 R5210kRES 0603 R5347kRES 0603 第4頁 共4頁 MODEL:TE100RF UHF 1WDATE:2004年4月7日 FREQ:450~460MHz ,460~470MHzVER: V6.00 E/C PO: RD-930048 RefValueTYPEManufacturerDescriptionNote R54*RES 0603 R5539RES 0603 R56150RES 0603 R5747kRES 0603 R58*RES 0603 R59220RES 0603 R61kRES 0603 R73.3kRES 0603 R83.3kRES 0603 R93.3kRES 0603 U1MB15E07SLFUJITSU 2.5GHz PLL IC U2XC6204B302TOREX Voltage Regulator X112.8MHzCL=20p 3ppmX'TAL SIZE UM5 1.'VALUE'欄位標示為 "*" 號者為不使用之零件. 2.調測步驟參考 "TE100RF調測步驟 Ver 2.1". TE310 DIGIT PCB V-1.10 DATE : APR,4/2005 Item Part NameDescriptionQty ReferenceMfg. 1LM7805正電壓 1A 穩壓IC, TO-220 1 U1 2M30620M8-3M30620M8A-2N1GP1U2 3 UT62L2568256K X 8 SRAM1U3 4 HIN232ACBRS232 DRIVER/RECEIVER S1U4 5 XC6201P332P Voltage Regulator, SOT-89 1 U5 6 74HC1383-8 LINE DECODER2 U6,U12 7 A29L004UL 512K X 8 BIT FLASH1 U7 8 RN5VD24AA Voltage Detector1 U9 8A ISL8485ECB-TRS-485 TRANSCEIVERS1U10 9 XC221A1100M CMOS OP AMP SOT-252 U13,U14 10 2SA1362GR PNP Transistor12 Q1~Q3,Q9~ Q16,Q18 11 DTA114YUA Switch Transistor(PNP)1 Q5 12 BUZZERBUZZER,AS-1201E-RPB,12m m1B1 13 E/C-6.36.3mm E-CAP, 47u/25V1 C1 14 CAP0603470p2 C2,C3 15 CAP06031u1C4 16 CAP06030.1u13 C5~C7,C9, C14,C16, C17,C23, C24,C26~ C29 17 CAP060356p2 C10,C11 18 CAP060312p2 C12,C13 19C/C10u/16V (A)7 C15,C18~ C22,C38 20 CAP0603220p2 C25,C35 21 CAP060382p1 C36 22 CAP0603180p1 C37 23 CON/DBRA-9PIN-F 9 PIN D-Sub connector1 J1 24 CON-SIP-100MIL-4PRJ-11 TELEPHONE JACK1J2 25 CON-SIP-2.0MM-8P connector patch 2.0mm1 J4 26 CON-SIP-2.00MM-6 Pconnector patch 2.0mm1 J5 27 JACK-DJ0702 DC POWER JACK1 J8 28 LED(YELLOW) LT5K33-AA-UC9T-T0120 D1~D19, D103 !!!!!!!UF.420!!USBOTNJUUFS!C/P/N/ 29 TVS SMBJ18A TRANSIENT VOLTAGE SUPPRESSOR1 D102 30 LED(RED)LT5K13-AA-UC9T-T011 D104 31 1N4148Switch Diode2 D105,D106 32 RES060310K10 R2~R4,R25, R26,R35, R37,R41, R49,R8 33 RES0603120R3R1,R5,R6 34 RES06033K33 R11~R13 35 RES06030R8 R18~R24, R36 36 R060362K1 R27 37 R0603160K1 R28 38 R0603100K1 R29 39 R060351K1 R30 40 R0603*R31 41 R0603*R32 42 R06031K4 R33,R42~ R44 43 R060315K1 R34 44 RES0603330R2 R39,R40 45 RES060322K1 R50 46 XTAL-HC-49/U CRYSTAL 4.9152mHz1 Y1 47 XTAL-2X6MM CRYSTAL 32.768KHz1 Y2 48PCBTE-310MAIN DIGIT VER1. 11 49PLCC 32 SMD SOCKET 1for U7 1 打件時U7位置使用PLCC 32 SMD SOCKET, FLASH IC待燒碼後再插入此SOCKET中

te310_V110.sch-1 - Tue Apr 19 10:49:54 2005 te310_V110.sch-2 - Tue Apr 19 10:50:00 2005

Test Report ---------------------------------------------------------------------------- 1/35 Report No.: G1590050590 FCC Certification Test Report of VHF Transmitter Applicant : Gold Apollo Co., Ltd. Rm 1, 3rd F1., No. 77, Sec. 1, Hsin Tai Wu Rd., His-Chih, Taipei Hsien, Taiwan, R.O.C. EUT : VHF Transmitter Model : TE-310, TE-300 FCC ID : MDATE3XU Report No. : G1590050590 Tested by : Training Research Co., Ltd. TEL : 886-2-26461146 FAX : 886-2-26461778 No. 15, Lane 530, Pa-Lian RD., Sec. 1, Hsichih City, Taipei Hsien, Taiwan, R.O.C. Test Report ---------------------------------------------------------------------------- 2/35 Report No.: G1590050590 CERTIFICATION We here by verify that: The test data, data evaluation, test procedures and equipment configurations shown in this report were made mainly in accordance with the procedures given in ANSI C63.4 (2003) as a reference and ANSI/TIA/EIA-603. All test were conducted by Training Research Co., Ltd., No. 15, Lane 530, Pa-Lian RD., Sec. 1, Hsichih City, Taipei Hsien, Taiwan, R.O.C.. Also, we attest to the accuracy of each. We further submit that the energy emitted by the sample EUT tested as described in the report is in compliance with the technical requirements set forth in the FCC Rules Part 90. Prepared by: Project Engineer (Jason Yeh) Authorized by: General Manager (Frank Tsai) Test date : December 14, 2005 Issue date : December 23, 2005 Test Report ---------------------------------------------------------------------------- 3/35 Report No.: G1590050590 Tables of Contents I. GENERAL ........................................................................................................................ 5 1.1 Introduction ................................................................................................................. 5 1.2 Description of EUT ..................................................................................................... 5 1.3 Specification of EUT .................................................................................................. 6 1.4 Configuration of System Under Test .......................................................................... 7 1.5 Location of the Test Site ............................................................................................. 7 1.6 General Test Condition ............................................................................................... 7 II. Emissions Designator: (Part 2.201).................................................................................. 8 III. RF Power Output (Part 2.1046, 90.205) ......................................................................... 9 3.1 Test Procedure ............................................................................................................ 9 3.2 Test Result .................................................................................................................. 9 3.3 Test Equipment ........................................................................................................... 9 IV. Occupied Bandwidth: (Part 2.1049, 90.209)..................................................................... 11 4.1 Test Procedure ........................................................................................................... 11 4.2 Test Equipment .......................................................................................................... 11 4.3 Test Result ................................................................................................................. 11 V. Spurious Emissions at Antenna Terminals (Part 2.1051, 90.210) .................................. 15 5.1 Test Procedure ........................................................................................................... 15 5.2 Test Result ................................................................................................................. 15 5.3 Test Equipment .......................................................................................................... 15 VI. Filed Strength of Spurious Radiation (Part 90.210) ...................................................... 22 6.1 Test Procedure ........................................................................................................... 22 6.2 Test Equipment .......................................................................................................... 22 6.3 Test Result ................................................................................................................. 23 Test Report ---------------------------------------------------------------------------- 4/35 Report No.: G1590050590 VII. Frequency Stability (Part 2.1055, 90.213) ..................................................................... 25 7.1 Test procedure (Temperature) .................................................................................... 25 7.2 Test Result ................................................................................................................. 25 7.3 Test Equipment .......................................................................................................... 25 7.4 Test procedure (Voltage) ........................................................................................... 26 7.5 Test Result ................................................................................................................. 26 VIII. Conducted Emission Test (ANSI C63.4 2003)............................................................... 27 8.1 Test Condition and Setup ........................................................................................... 27 8.2 Test Result ................................................................................................................. 28 IX. Transient Frequency Behavior (Part 90.214) ................................................................. 31 9.1 Test Procedure .................................…

Text truncated - open the document above for the full version.

Conducted Test Placement: (Photographs) Radiated Test Placement: (Photographs)