NGVAWW902TXwireless camera

Wireless Camera/Baby Monitor AWW902/AWWS916 Features: 1. Crisp picture and voice quality. 2. Handset size monitor, suitable for hand-held, pocket, or stationary display. 3. Power save mode by turning video off when only voice monitoring is needed. 4. Use 2.4GHz ISM band for RF transmission. 5. Battery for 3 hours audio & video operation, or 5 hours voice only operation. 6. Receiver can output to TV or VCR. 7. Other applications include security surveillance, activity monitoring, etc. How to use: 1. Identify the following parts: a) Wireless Camera unit b) Wireless Receiver unit c) Two power adapters (Input: either AC120V/60Hz for US or AC230V/50Hz for Europe) d) Ear Phone - RCA cable e) This Instruction pages 2. To activate wireless camera: a) Plug the power adapter into the power jack. b) Turn on the power with the power on/off switch. c) Select any one of the channels with Channel selector. 3. To activate wireless receiver: a) Plug power adapter in to power jack or install 3 AA batteries. b) Push power on/off button to turn on the power. c) Set the channel same as the one on the camera. d) Adjust the volume control. e) Now the receiver shall start to function 4. Silent mode / Video mode a) You can enter the power saving mode when baby is silent by simply pressing the “Display on/off” button once b) When some voice heard, the receiver will automatically go back to video mode This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment. Power On/Off Display On/Off Brightness Volume Control Channel Selector Display Status Indicator Power Jack Line Out Ear Phone Receiver Antenna Power Indicator Lens IR LED Microphone Power Jack Power On/Off Channel selector Camera PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com Notice: 1.) The Baby Monitor can transmit and receive audio and video signals on four distinct frequencies, or channels. This allows you to monitor up to four different cameras using a single receiver, to monitor a single camera with two receivers, or to use any other combination of transmitters and receivers. 2.) If baby monitor reception is not clear, select a different channel for both the camera and receiver. 3.) Do not place camera in direct sunlight or high light, or expose to excessive dust or humidity. Never aim camera directly into the sun. 4.) There is a Power indicator on the top-front of camera to show the power-on status. 5.) For the receiver, under normal operations, the green power-on signal flash slowly, but when the power is low, the green signal will flash fast and the system will automatically shut down. There is no audible or video warning prior to shutdown. 6.) The receiver is designed for portability and convenience. It can be held in your hand and carried around, stored in a packet, or placed at a comfortable viewing angle on a flat surface. Specifications: 1. Frequency range: 2400-2483MHz 2. Channel: 4 Channels 3. Video format support: NTSC or PAL-S Transmitter (Camera) 4. V/A modulation type: FM/FM 5. Lens: F1.8, f6.0mm 6. View angle: 120∘ 7. Image sensor: 1/3” CMOS image sensor 8. Effect pixels: NTSC－510(H) X 492(V) PAL － 628(H) X 582(V) 9. Resolution: More than 230 TV lines 10. Minimum illumination: 3 Lux (F1.2) 11. Auto white balance: Auto 12. Auto electronic exposure: 1/60-1/15000 second 13. Video signal format: Composite video sync. Positive 14. Power consumption: DC12V/300~350mA Receiver 15. Receive sensitivity: -85dBm 16. Display screen & type: 1.8” (4.6cm) diagonal TFT LCD 17. Display resolution: 558(H)*234(V) dot 18. View angle: Up:17∘Down:35∘ Left & Right: 45∘ 19. Headphone output power: 15mW into 32 Ohms headphone 20. A/V output: 3.5 mm Phone jack 21. Battery type: “AA” battery X 3 (option) 22. Adaptor: DC6V/600~700mA regulated 23. Standby current : 10mA DOC0000-0202 PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

Report No.: 044H054FI Page : 1 of 14 Version:1.0 Attachment 2 : EUT Detailed Photographs (1) EUT Photo (2) EUT Photo

AIRWAVE TECHNOLOGIES INC. 3F NO.9 INDUSTRY E. 9TH RD SCIENCE-BASED INDUSTRIAL PARK HISNCHU, TAIWAN R.O.C. TEL: 886-3-5778099 FAX: 886-3-5778199 FCC ID.: NGVAWW902TX 3F, NO.9, INDUSTRY E. RD. IX, SCIENCE-BASED INDUSTRIAL PARK, HSINCHU, TAIWAN, R.O.C FCC ID The FCC ID will be placed on the equipment as shown in the photograph below. Wireless Camera Model No.: AWW902 F F C C C C I I D D : : N N G G V V A A W W W W 9 9 0 0 2 2 T T X X This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

AIRWAVE TECHNOLOGIES INC. 3F NO.9 INDUSTRY E. 9TH RD SCIENCE-BASED INDUSTRIAL PARK HISNCHU, TAIWAN R.O.C. TEL: 886-3-5778099 FAX: 886-3-5778199 FCC ID.: NGVAWW902TX 3F, NO.9, INDUSTRY E. RD. IX, SCIENCE-BASED INDUSTRIAL PARK, HSINCHU, TAIWAN, R.O.C FCC ID The FCC ID will be placed on the equipment as shown in the photograph below. Wireless Camera Model No.: AWW902 F F C C C C I I D D : : N N G G V V A A W W W W 9 9 0 0 2 2 T T X X This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. S/N: Made in Taiwan

Report No.: 044H054FI Page : 2 of 14 Version:1.0 (3) EUT Photo (4) EUT Photo Report No.: 044H054FI Page : 3 of 14 Version:1.0 (5) EUT Photo (6) EUT Photo Report No.: 044H054FI Page : 4 of 14 Version:1.0 (7) EUT Photo (8) EUT Photo Report No.: 044H054FI Page : 5 of 14 Version:1.0 (9) EUT Photo (10) EUT Photo Report No.: 044H054FI Page : 6 of 14 Version:1.0 (11) EUT Photo (12) EUT Photo Report No.: 044H054FI Page : 7 of 14 Version:1.0 (13) EUT Photo (14) EUT Photo Report No.: 044H054FI Page : 8 of 14 Version:1.0 (15) EUT Photo (16) EUT Photo Report No.: 044H054FI Page : 9 of 14 Version:1.0 (17) EUT Photo (18) EUT Photo Report No.: 044H054FI Page : 10 of 14 Version:1.0 (19) EUT Photo (20) EUT Photo Report No.: 044H054FI Page : 11 of 14 Version:1.0 (21) EUT Photo (22) EUT Photo Report No.: 044H054FI Page : 12 of 14 Version:1.0 (23) EUT Photo Report No.: 044H054FI Page : 13 of 14 Version:1.0 (24) EUT Photo Report No.: 044H054FI Page : 14 of 14 Version:1.0 (25) EUT Photo (26) EUT Photo

Report No. 044H054FI Page : 5 of 35 Version:1.0 1.2. Operation Description The EUT is Wireless Camera. The operation frequency is from 2.414GHz to 2.468GHz with FM modulation. Four manually selectable channels were built in the EUT. the signal will be transmitted through 2.4 GHz FM RF signal from the soldered on PCB antenna from EUT to receiver. DC 9V shall be provided for EUT operation.

1234 1234 D C B A B C D A PAGE REV.DWG TITLE DWG NO. SIZE DRAW BY ENG. BY ISSUED BY 大紘科技股份有限公司 AIRWAVE TECHNOLOGIES INC. ENGINEERDATEDESCRIPTIONECN NO. REV. REVISIONS of Error : Awlogo.bmp file not found. D 32 ( USE TDA9820 ) AWM620RX-WITHOUT-INV-VC_IF Circuit ( IF 479.5MHz Demodulator ) R61 56K R57 10K C26 4.7P +5V C27 6.8P L5 22nH C28 3.9pF R15 47K Q3 BF904R R28 10K R17 0R L6 27nH C69 1.5PF L9 33nH C32 0.1uF C31 180P C68 10PF R67 68K R66 150R Q7 BFG425 C30 180PF C29 2.2PF L4 22nH 12345678 910111213141516 IC2 SL1461SA C74 4.7nF R70 6.8K L8 10nH C35 10PF C34 10PF L7 10nH C67 1nF R65 0R R60 1KR R59 1KR C66 120PF C65 120PC64 0.1uF C63 100P R64 3.9K +5V G1 G2 A/V output R16 27K +5V C71 1nF SAW1 SAW4816AD +5V D S RSSI 5V To AGC (479.5MHz) R27 4.7K B 2 C 6 E 1 Q6A PUMZ1 e 4 c 3 b 5 Q6B PUMZ1 R58 680R R63 30K R62 39K Vagc Vagc HS Chou Xin Xin I N V + G N D N C + C O M N O - Q8 N/A VC1 2.5PF C33 2PF +5V R71 N/A R88 N/A C70 0.1uF +5V Video Control VD3 BB145 VD2 BB145 0603 chip IND 0603 chip IND R69 0R 93 03 12 PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

12345678 A B C D 87654321 D C B A PAGE REV.DWG TITLE DWG NO. SIZE DRAW BY ENG. BY ISSUED BYA3 大紘科技股份有限公司 AIRWAVE TECHNOLOGIES INC. ENGINEERDATEDESCRIPTIONECN NO. REV. REVISIONS Error : Awlogo.bmp file not found. of 13 2 FIL1 6.5MHz R77 18K R85 180K R84 150K R86 2.2K R81 820R R79 560R R83 56R R75 100R R68 1K C75 33P L11 18uH C79 18P R76 1.2K R80 180R +5V C81 0.1u +5V R90 10K R89 27K R91 27K R92 150R R87 22R +5V R72 270R +5V R37 68K C44 1u R29 300K R21 100K +5V R22 100K +5V R33 560R 13 2 FIL2 6.0MHz R26 82K C42 1u R27 300K R20 100K +5V R19 100K R31 560R 1 + 3 - 2 4 8 IC5A G1401 7 + 5 - 6 IC5B G1401 +5V C78 1u(0805) C82 1u(0805) R78 560R R82 560R C84 120P C80 0.1u R74 68K C76 0.1u C72 27P C77 33P L10 18uH C73 1.5P C85 0.1u R73 270R Audio-R Audio-L Video CH4 CH3 CH2 CH1 Video Audio-L Audio-R A/V output B 2 C 6 E 1 Q10A PUMX1 b 5 c 3 e 4 Q10B PUMX1 B 2 C 6 E 1 Q11A PUMZ1 e 4 c 3 b 5 Q11B PUMZ1 12345678 9 1 0 1 1 1 2 1 3 1 4 1 5 1 6 IC6 TDA9820 +5V R36 2.2K R30 2.2K C43 0.022u C41 0.022u C38 2.2u R24 27K R23 2K C37 2.2u R28 1K C40 2.2u C39 0.01u +5V D 33 Xin Xin ( USE TDA9820 ) AWM620RX-WITHOUT-INV-VC_Baseband Circuit ( Audio Demodulator & A/V Amp ) PIN1 GPD14-122-1-3.0/2.3 B 2 C 6 E 1 Q9A PUMZ1 e 4 c 3 b 5 Q9B PUMZ1 R35 0R R32 8.2K R34 8.2K +5V Remote Vin 1 G N D 2 Vout 3 IC4 78L03 R54 0R +3V RSSI +5V C62 6.8P C61 1.5P HS Chou R50 39R +4.3V Video Control C83 0.1uF R25 20KR R18 30KR Remote 93 03 12 PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

1234 1234 D C B A B C D A PAGE REV.DWG TITLE DWG NO. SIZE DRAW BY ENG. BY ISSUED BY 大紘科技股份有限公司 AIRWAVE TECHNOLOGIES INC. ENGINEERDATEDESCRIPTIONECN NO. REV. REVISIONS of Error : Awlogo.bmp file not found. ANTENNA C51 10pF T R L C45 2.2P C46 10pF Q4 BFG425 R38 82K R41 680R TRL C47 8pF C48 4.7pF TRL C52 1.5pF T R L C50 3pF C2 4.7pF L2 100nH R3 390R C23 100pF R8 12R R4 200R C5 1.5pF T R L Q2 BFS520 C16 2.2pF C11 1pF C12 0.5pF R55 120KR C22 1nF C57 0.047uF R46 12K C17 0.5pF R13 68R C59 220pF C13 1nF R10 20KR R6 39KR C7 10pF T R L Q1 BFG425 L1 12nH C19 1pF C14 6pF L3 27nH C20 1.5pF C18 1pF C25 0.5pF TRLTo AGC (479.5MHz) T R L 12345678 91 0 1 1 1 2 1 3 1 4 1 5 1 6 IC1 MB15E07 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 1 7 1 8 IC5 PIC16C54 C3 0.1uF R4410KR R45 10KR R53 10KR R5210KR 3V C54 0.1uF CTL1 8MHz C55 33pF C53 33pF +3V R1 1KR +3V R9 390R C15 0.1uF +3V VD1 BB145 +5V C56 1.2pF CH1 CH2 CH3 CH4 D 31 ( USE TDA9820 ) AWM620RX-WITHOUT-INV-VC_RF Circuit ( LNA & Lo. & Mixer ) +4.3V +3V R51 1KR C60 0.1uF +3V C9 0.1uF Remote +3V +5V C21 1nF +3V C58 2.2nF R11 33KR C10 2.2pF R5 12K C6 6.8pF R7 10K C8 10pF R12 270R C24 1.5pF OSC DO Fin CLK Data LE PS +5V Xin Xin HS Chou +4.3V C1 4.7pF R42 5.1K C49 100pF R40 68R L12 22nH C4 100pF G1 G2 VD4 BB833 R43 5.6K R2 10KR RSSI Q5 CF739 D S 93 03 12 PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

12345678 A B C D 87654321 D C B A PAGE REV. DWG NO. DWG TITLE SIZE ENG. BY ISSUED BY DRAW BY A3 ENGINEERDATEDESCRIPTION 大紘科技股份有限公司 ECN NO. AIRWAVE TECHNOLOGIES INC. REV. REVISIONS Error : Awlogo.bmp file not found. 1 of 1 H.M.W. U.M.D. AWM610 TX-LVD Circuit A H.M.W. ANTENNA 2 N/A R4 0R 1 N/A R1 390R C5 4.7P C15 10P Q1 BFG425 L2 22NH R12 12K R6 39R C13 100P C14 4.7P R3 1.8K R9 22K R8 10K R2 910R C8 0.022uF C6 10UF C3 1UF C34 1uF R23 1KR R24 2KR R38 56R VR1 200R C36 30P R39 18R L4 18uH Video C37 68P C12 1P L6 18uH C32 33pF C41 0.1uF R36 51KR R21 150R C4439PF R33 2KR C23 0.1uF R29 15K R25 91KR R27 82KR C39 120PF C38 1NF L5 12uH C40 330pF R26 910KR VD2 BB153 C43 470PF R35 3.9KR C33 0.1uF RTH1 47KR R37 220KR 3V R30 51K R28 5.1K R22 10K R C35 1NF VC1 10PF R34 1.2K 1 2 3 Q3 PUMX1 1 2 3 Q3 PUMX1 R32 0R C31 0.1uF +3V C42 15P R31 200R R40 330R AWM610 2.4GHz TX RF Module Circuit Dirgram C2 1P C1 1P L1 3.3NH C30 1.8pF C27 1P C21 5.6P VD1 BB142 C26 4.7P Q2 BFS520 L3 100NH R14 8.2K R16 12K R17 150R R 1 6 P 1 5 L o 1 4 Z c 1 3 V p 3 o s c i n 1 o s c o u t 2 V c c 4 D o 5 G N D 6 X f i n 7 F i n 8 C L K 9 D a t e 1 0 L E 1 1 P S 1 2 IC1 15E07 C9 0.1uF C101nF C4 1nF C7 0.1uF C16 0.1uF C11 1.5P R10 1KR R13 0R R A 2 K i n 2 1 R A 1 1 8 K i n 1 R A 0 1 7 K i n 0 O S C 1 1 6 C L K i n O S C 2 1 5 N / A V d d 1 4 V c c / M C L R R e s e t 4 R A 3 K i n 3 2 R T C C N / A 3 V s s G N D 5 R B 0 K o u t 0 6 R B 1 K o u t 1 7 R B 2 K o u t 2 8 R B 3 K o u t 3 9 R B 4 1 0 K o u t 4 R B 5 1 1 I . R . o u t R B 6 1 2 L E D . o u t R B 7 1 3 M o d e IC3 ICT0600-0010 R19 10K R2010K R1510K R1810K CH1CH4 R7 100R R11 10K C17 0.1uF R5 10kR CTL1 8MHz +3V C29 0.1uF +3V C24 1uF C25 0.1uF +5V +5V +3V +5V 78L03 IC2 ELM9830BA C18 2P C19 N/A C28 33P C22 33P +3V PDF created with FinePrint pdfFactory Pro trial version http://www.pdffactory.com

Report No. 044H054FI Page : 1 of 35 Version:1.0 Test Report Product Name : Wireless Camera Model No. : AWW902 FCC ID.: NGVAWW902TX Applicant : AIRWAVE TECHNOLOGIES INC. Address : 3F, NO.9, INDUSTRY E. RD. IX, SCIENCE-BASED INDUSTRIAL PARK, HSINCHU, TAIWAN, R.O.C Date of Receipt : Apr. 22, 2004 Date of Test : Apr. 30, 2004 Report No. : 044H054FI The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Report No. 044H054FI Page : 2 of 35 Version:1.0 Test Report Certification Test Date : Apr. 30, 2004 Report No. : 044H054FI Product Name : Wireless Camera Applicant : AIRWAVE TECHNOLOGIES INC. Address : 3F, NO.9, INDUSTRY E. RD. IX, SCIENCE-BASED INDUSTRIAL PARK, HSINCHU, TAIWAN, R.O.C Manufacturer : AIRWAVE TECHNOLOGIES INC. Model No. : AWW902 FCC ID. : NGVAWW902TX Rated Voltage : AC 120V/60Hz Trade Name : AIRWAVE Measurement Standard : FCC CFR Title 47 Part 15 Subpart C Paragraph 15.249: 2003 Measurement Procedure : ANSI C63.4: 2001 Test Result : Complied The Test Results relate only to the samples tested. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation. This report must not be used to claim product endorsement by NVLAP any agency of the U.S. Government Documented By : ( Carol Tsai ) Tested By : ( Louis Hsu ) Approved By : ( Kevin Wang ) Accredited by NIST (NVLAP) NVLAP Lab Code: 200347-0 Report No. 044H054FI Page : 3 of 35 Version:1.0 TABLE OF CONTENTS Description Page 1. GENERAL INFORMATION ...............................................................................................................4 1.1. EUT Description .....................................................................................................................................4 1.2. Operation Description .............................................................................................................................5 1.3. Tested System Details .............................................................................................................................6 1.4. Configuration of Tested System ..............................................................................................................6 1.5. EUT Exercise Software ...........................................................................................................................6 1.6. Test Facility .............................................................................................................................................7 2. Conducted Emission ..............................................................................................................................8 2.1. Test Equipment........................................................................................................................................8 2.2. Test Setup ................................................................................................................................................8 2.3. Limits ......................................................................................................................................................8 2.4. Test Procedure .........................................................................................................................................9 2.5. Test Result of Conducted Emission ......................................................................................................10 3. Radiated Emission ...............................................................................................................................10 3.1. Test Equipment......................................................................................................................................16 3.2. Test Setup ..............................................................................................................................................16 3.3. Limits ....................................................................................................................................................17 3.4. Test Procedure .......................................................................................................................................18 3.5. Test Result of Radiated Emission..........................................................................................................19 4. Band Edge ............................................................................................................................................26 4.1. Test Equipment......................................................................................................................................26 4.2. Test Setup ..............................................................................................................................................26 4.3. Limit ......................................................................................................................................................28 4.4. Test Procedure .......................................................................................................................................28 4.5. Test Result of Band Edge ......................................................................................................................29 5. EMI Reduction Method During Compliance Testing.......................................................................33 Attachment 1: EUT Test Photographs Attachment 2: EUT Detailed Photographs Report No. 044H054FI Page : 4 of 35 Version:1.0 1. GENERAL INFORMATION 1.1. EUT Description Product Name : Wireless Camera Trade Name : AIRWAVE FCC ID. : NGVAWW902TX Model No. : AWW902 Frequency Range : 2414MHz ~ 2468MHz Type of Modulation : FM Antenna Type : Soldered on…

Text truncated - open the document above for the full version.

Report No.: 044H054FI Page : 1 of 3 Version:1.0 Attachment 1: EUT Test Setup Photographs Front View of Conducted Test Back View of Conducted Test Report No.: 044H054FI Page : 2 of 3 Version:1.0 Front View of Radiated Test Back View of Radiated Test Report No.: 044H054FI Page : 3 of 3 Version:1.0 Front View of Radiated Test (Horn)