NIYMWL2090-PCordless Laser Mouse

Wireless 7-buttons Rechargeable Mouse USER’S MANUAL (Model #: DL-2090C/ MWL2090-P) Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: y Take frequent breaks, get up and walk around several times every hour. y Vary your tasks throughout the day. y Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. y Adjust your chair and keyboard so your upper arms and wrists are straight. y Avoid resting your wrists on sharp edges. SYSTEM REQUIREMENT y Mouse is compatible with standard Microsoft mode. y 3 rd button and wheel function require Win98/2000/ME/NT/XP. y 4 th & 5 th button require Win2000/XP to function, or will require to install additional driver as attached with this product. y 6 th & 7 th button require installing additional driver as attached with this product. y If your computer’s operating system is Windows 98/ 98SE, please prepare the Windows98 or 98SE compact disk for system’s request during the installation of mouse. y *USB HUB is compatible with standard USB 1.1. Note: 2 USB ports cradle only for MWL2090-P, and the cradle without 2 USB ports is DL-2090C. Otherwise, they are the same. Getting Started Congratulations on your purchase DL-2090/ MWL2090-P, a 7 buttons wireless re-chargeable LASER mouse. There are several important features in this mouse: LASER Mouse LASER mouse, the last technology of mouse industry. The traditional red led mouse can not work on some surface, especially smooth surface such as glass and mirror. But, LASER mouse has overcome the “glass barrier”. High Resolution Normal resolution of a red LED mouse is 400 dpi or 800 dpi, but the hard ware resolution of a LASER can be increased to 1,600 easily. The accuracy is also much better than LED mouse. The DL-2090/ MWL2090-P is a 800/ 1,600 dpi mouse. A dpi swap button on the middle-top of the mouse. One click can swap the dpi from 800 to 1,600. Build-in Li-polymer battery By well power management makes the long standby time. Charging in short time can provide the power for all day using. 27MHz PR technique with 10 Channels with 256 ID codes for each channel to avoid the interruption. So, Multi-channel the DL-2090/ MWL2090-P can work much stable than other wireless mice. Charging cradle with build-in receiver and 2 ports 1.1 USB HUB The USB receiver is a multi-functional product. It can be a mouse receiver, mouse charger, and a 2 port USB 1.1 HUB. All these are PNP function. The USB HUB is compatible with standard USB 1.1. Package Contains Your Radius Mouse package includes the following: 1. Wireless Mouse 2. Charging cradle with build-in receiver. 3. CD-ROM 4. User’s manual Note ： If any part is missing, please contact your dealer for a replacement immediately. BEFORE YOU BEGIN y Keep this installation guide for future reference! It contains Important Troubleshooting Information. y Keep your old PS/2 mouse as a back-up device. PRODUCT INSTALLATION Step 1. Hardware Installation (Connecting the USB cradle receive) 1. Turn off your computer 2. Disconnect the current mouse 3. Plug the adapter into the receiver 4. Plug the USB connector (receiver) into USB port (computer). 5. Turn the computer on a. USB is a PnP device; you can plug the device no matter the computer is on or off. Of course, you can remove USB device in the same way. b. If the device is HD or pen drive or any device which can store files, stop the device than remove is the best way to protect the files. c. The suggestion Is turn off the computer first. Step 2. Waiting for software install 1. If your system is Windows ME/ 2000/ XP, windows will find a new device and install standard driver automatically. 2. The standard software only support standard functions and will not support special functions of the mouse. Step 3. Driver install 1. Insert the driver CD into your CD-ROM player 2. It is a auto-run disk, following the installation guide and finish the process. 3. If you stop the auto-run function, please run the “setup.exe” file in the disk. USING PRODUCT USB HUB 1. Plug USB connector into the socket on the receiver. 2. The HUB is compatible with standard USB 1.1. Just use it as normal USB HUB. Note. These USB port provide the power at 5V, 100mA, if your device need more power of it, please DO NOT plug it into the HUB, or your system will crash. Connect the mouse with the receiver This RF wireless LASER mouse provides multi radio channels and different ID codes to avoid interference with other users of wireless mice. Before using the wireless mouse, you must ensure that the same channel & ID are set for the mouse and its receiver. Please follow the steps as below to set up: 1. Establish communication between the receiver and the mouse (Select identification codes). y Press and release the connect button on the receiver. y Press and release the “connect” button on bottom of the wireless mouse, within 6 seconds. y After above “connect” procedure, the same ID is selected on both of the receiver and the mouse. y Please move the mouse to operate its cursor. If there is problem, please do the connecting setting procedure again or check the trouble shooting guide. MWL2090-P DL-2090C Operation Guide Battery Low Indication When the voltage level of the battery goes down under the preset level, the scrolling wheel will flash at least three times on moving or clicking the mouse. Although the mouse can still work for a while, at this moment, user should put the mouse on the receiver (charger) to re-chargeable batteries as soon as possible. To USB port 1.1 USB port ID code connection DPI Switch button ID code connection DPI Switch button Operations on power saving mode- In order to conserve battery power, the mouse is designed to reduce power consumption …

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

S/N： Model:MWL2090-P Made in ChinaMadeinChina FCC ID:NIYMWL2090-PFCCID:NIYMWL2090-P 78-100-XXX 0560 ! CLASS 1 LASER PRODUCTCLASS1LASERPRODUCT APPAREIL A LASER DE CLASSE 1APPAREILALASERDECLASSE1 LASER KLASSE 1LASERKLASSE1 LUOKAN 1 LASERLAITELUOKAN1LASERLAITE PRODUIT LASERPRODUITLASER CATEGORIE 1CATEGORIE1 Tested to Comply with FCC Standards TestedtoComply with FCCStandards FOR HOME OR OFFICE USEFORHOMEOROFFICEUSE
: :78-100-XXX :78-100-XXX  :   

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7

FCC ID: NIYMWL2090-P Report No.: RF940609L16 Operational Description The transmitter of the EUT (Cordless Laser Mouse) is powered by 3Vdc Batteries. The EUT uses Loop Antenna. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference.

FCC ID: NIYMWL2090-P Report No.: RF940609L161Report Format Version 2.0.3 FCC TEST REPORT REPORT NO.: RF940609L16 MODEL NO.: MWL2090-P RECEIVED: Jun. 09, 2005 TESTED: Aug. 19 ~ Aug. 23, 2005 ISSUED: Aug. 23, 2005 APPLICANT: DEXIN CORPORATION ADDRESS: 14F-8, No 258, Lian Cheng Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS:No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION:No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 16 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA No. 2177-01 FCC ID: NIYMWL2090-P Report No.: RF940609L162Report Format Version 2.0.3 Table of Contents 1CERTIFICATION.......................................................................................................3 2SUMMARY OF TEST RESULTS...............................................................................4 2.1MEASUREMENT UNCERTAINTY.............................................................................4 3GENERAL INFORMATION........................................................................................5 3.1 GENERAL DESCRIPTION OF EUT...........................................................................5 3.1DESCRIPTION OF TEST MODES............................................................................6 3.1.1CONFIGURATION OF SYSTEM UNDER TEST.......................................................6 3.1.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL:............................7 3.2GENERAL DESCRIPTION OF APPLIED STANDARDS............................................8 3.3DESCRIPTION OF SUPPORT UNITS......................................................................8 4TEST PROCEDURE AND RESULT...........................................................................9 4.1CONDUCTED EMISSION MEASUREMENT.............................................................9 4.2RADIATED EMISSION MEASUREMENT..................................................................9 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT................................................9 4.2.2TEST INSTRUMENT...............................................................................................10 4.2.3TEST PROCEDURE...............................................................................................11 4.2.4TEST SETUP..........................................................................................................12 4.2.5EUT OPERATING CONDITION...............................................................................12 4.2.6TEST RESULTS......................................................................................................13 4PHOTOGRAPHS OF THE TEST CONFIGURATION...............................................15 5INFORMATION ON THE TESTING LABORATORIES.............................................16 FCC ID: NIYMWL2090-P Report No.: RF940609L163Report Format Version 2.0.3 1 CERTIFICATION PRODUCT: Cordless Laser Mouse BRAND NAME: DEXIN MODEL NO: MWL2090-P TEST SAMPLE: ENGINEERING SAMPLE TESTED: Aug. 19 ~ Aug. 23, 2005 APPLICANT: DEXIN CORPORATION STANDARDS: FCC Part 15, Subpart C (Section 15.227), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY:, DATE:Aug. 23, 2005 ( Wendy Liao ) TECHNICAL ACCEPTANCE: , DATE:Aug. 23, 2005 Responsible for RF ( Gary Chang ) APPROVED BY:, DATE:Aug. 23, 2005 ( Cody Chang, Deputy Manager ) FCC ID: NIYMWL2090-P Report No.: RF940609L164Report Format Version 2.0.3 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPERESULTREMARK 15.207Conducted Emission TestN/A Power supply is 3Vdc from batteries 15.227 15.209 Radiated Emission TestPASS Minimum passing margin is –1.00dB at 730.32MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: MEASUREMENTFREQUENCYUNCERTAINTY Conducted emissions9kHz~30MHz2.44 dB Radiated emissions30MHz ~ 200MHz3.63 dB 200MHz ~1000MHz3.65 dB 1GHz ~ 18GHz2.20 dB 18GHz ~ 40GHz1.88 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. FCC ID: NIYMWL2090-P Report No.: RF940609L165Report Format Version 2.0.3 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT Cordless Laser Mouse MODEL NO. MWL2090-P POWER SUPPLY 3Vdc from batteries MODULATION TYPE FSK CARRIER FREQUENCY OF EACH CHANNEL 26.985, 27.015, 27.045, 27.075, 27.105, 27.135, 27.165, 27.195, 27.225, 27.255MHZ NUMBER OF CHANNEL 10 ANTENNA TYPE Loop antenna DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1. The EUT is a Cordless Laser Mouse. 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. FCC ID: NIYMWL2090-P Report No.: RF940609L166Report Format Version 2.0.3 3.1 DESCRIPTION OF TEST MODES Ten channels were provided to this EUT. ChannelFrequencyChannelFrequency 126.985627.135 227.015727.165 327.045827.195 427.075927.225 527.1051027.255 3.1.1 CONFIGURATION OF SYSTEM UNDER TEST EUT Test table (Power from b…

Text truncated - open the document above for the full version.

FCC ID: NIYMWL2090-P Report No.: RF940609L1615Report Format Version 2.0.3 4 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST