NIYMWL52-PCordless Laser Mouse

MWL52-P Wireless LASER 5+1 Buttons Mouse USER’S MANUAL Model #: MWL52-P System Requirement ) Mouse compatible with standard Microsoft OS ) 4 th & 5 th side buttons require Windows TM , 2000 or XP, or driver installation ) Tilt wheel and the extra hot-key require driver installation to be functioned. ) 1 st , 2 nd and wheel are compatible with MAC ) 6 th button, the dpi switch button, on the top case compatible with standard Microsoft OS and MAC. No driver request. Before you begin ) Keep this installation guide for future reference! It contains Important Troubleshooting Information. ) Keep your old USB mouse as a back-up device. Getting Started Congratulations on your purchase of LASER 5+1 button mouse. LASER mouse is the last technique of mouse industry. The most important feature for LASER mouse is that can work on most of shining surface and glass. In additional, its high resolution, 1,600 hardware dpi, provides users a great experience to operate. Package Contains Your MWL52-P Mouse package includes the following: 1. MWL52-P LASER mouse 2. Receiver 3. Charging USB cable 4. User’s manual 5. CD-ROM Driver for Windows OS NoteIf any part is missing, please contact your dealer for a replacement immediately Hardware Installation Guide Step 1. Plug the USB receiver to Computer 1. USB is designed as a PnP device; you can plug the device no matter the computer is on or off. Of course, you can remove USB device in the same way. 2. If the device is HD or pen drive or any device which can store files, stop the device than remove is the best way to protect the files. 3. The suggestion is turn on the computer, than plug it. MWL52-P User Manu- Page 1 of 8 1.1 Edition MWL52-P User Manu- Page 2 of 8 1.1 Edition Step 2. Waiting for new device detection 1. If your system is Windows ME/ 2000/ XP, windows will find a new device and install standard driver automatically. 2. The standard software only support standard functions and will not support special one of the mouse. Step 3. Insert the AAA battery 1. Turn the mouse up side down. 2. Remove the battery room door. 3. Put 2 AAA batteries in the correct direction. 4. Put the battery room door back. Step 4. Synchronize the RF Mouse If the mouse is in sleep mode click the mouse button once to wake it up. 1. Bring the mouse within 1 ft range from the receiver, Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the “CONNECT” button once. Do Not depress the CONNECT button longer then 1.5 seconds. (The red sensor light will go off when the “CONNECT” button is pressed down.) Note: Please poke the Mouse Connect button first, and then click the receiver’s button 2. Click the receiver’s connect button once (located on the back of the receiver) within 5 seconds of clicking the connect button on the mouse. The LED will start blinking, when the connection is established. 3. Move the mouse around to test if it was successful. 4. If the synchronization is not successful for some reason please (1) Remove the batteries and unplug the receivers (2) Wait for 20 sec then to try the step 1 to 4 again. Note: * During normal use, please make sure that the mouse is no more than 3 ft away from the receiver in order to have reliable connection. ** The LED on the receiver will light up or blink while the mouse is being used. Step 5. Charging Batteries by Mouse 1. Put 2 AAA rechargeable batteries in the battery room. 2. Plug the UBS charging cable into USB port & mouse Software Installation & Operation Guide Note: Before installing this driver, existing mouse driver has to be removed. To install the software, please follow the steps below to finish: 1. Insert the Auto-Run CD-ROM onto CD-ROM driver, the installation menu will be executed automatically. (If the auto-run does not function itself, double-click the “setup” icon in the CD files.) 2. The setup program will guide you to finish the installation step by step. MWL52-P User Manu- Page 3 of 8 1.1 Edition MWL52-P User Manu- Page 4 of 8 1.1 Edition 3. After you finish the installation, select "Restart" to reboot your system and activate multimedia hot keys and wheel scrolling functions. Programmable Buttons … After installed the driver, a symbol will show in the right hand side of working bar. … The Office-Wheel Function is attached on the mouse software. Users can change the default function of wheel and extra hot-keys. … The hot-key can be defined by clicking “Control panel”->”Mouse”->”special buttons”. MWL52-P User Manu- Page 5 of 8 1.1 Edition … Mouse setting window Software/ Driver remove Please using “Program add/ remove” icon in control panel to remove the driver. GENERAL SPECIFICATIONS … High-tech 650nm LASER mouse … Tilt Wheel … Multi-channels with 256 ID code/ channel … 27MHz RF technology … 800/ 1,600 dpi hardware resolution … 5+1 buttons design … USB charging cable, to charge mouse during operation … Low power consumption … Right hand Ergonomic design for comfortable grip. … Software added-value smart-functions … Programmable buttons … Compatible with USB 2.0 low-speed protocol Troubleshooting MOUSE NOT DETECTED z Please note that USB port needs driver to active in Windows 95/ 98/ NT, or the USB mice will not working . z Make sure the mouse cable is plugged into the correct port-USB. An USB mouse connects only to a USB port. z Make sure your USB port has the proper configuration. Refer to your computer MWL52-P User Manu- Page 6 of 8 1.1 Edition documentation for the correct port configuration. z You may have other system devices (e.g. a modem card) that conflict with the mouse. Check the IRQ/address settings of these devices for conflicts, and change the setting as required. Refer to your computer documentation to make these changes. Determine whether the problem is mouse or system related, try the mouse on a second system or a different mouse on your current system. Note: If mouse is not be detected and you installed driver already, a symbol will be showed in the right hand side of worki…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT (Model No.: MWL52-P) Page 2 (Model No.: MWL45-P)

FCC ID : NIYMWL52-P Label Location Model no: MWL52-P Model no: MWL45-P Label Location

Page 3 (Model No.: MWL52-P) Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 (Model No.: MWL45-P) Page 10 Page 11 Page 12 Page 13 Page 14

FCC ID: NIYMWL52-P Report No.: RF940609L15 Operational Description The transmitter of the EUT (Cordless Laser Mouse) is powered from 3Vdc Batteries or 5Vdc from host equipment. The EUT uses Loop Antenna. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference.

FCC ID: NIYMWL52-P Report No.: RF940609L151Report Format Version 2.0.4 FCC TEST REPORT REPORT NO.: RF940609L15 MODEL NO.: MWL52-P OEM MODEL NO.: MWL45-P RECEIVED: Jun. 09, 2005 TESTED: Sep. 16 ~ 19, 2005 ISSUED: Sep. 26, 2005 APPLICANT: DEXIN Corporation ADDRESS: 14F-8, No 258, Lian Cheng Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C. ISSUED BY: Advance Data Technology Corporation LAB ADDRESS: No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION: No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 25 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA No. 2177-01 FCC ID: NIYMWL52-P Report No.: RF940609L152Report Format Version 2.0.4 Table of Contents 1CERTIFICATION......................................................................................................3 2SUMMARY OF TEST RESULTS..............................................................................4 2.1MEASUREMENT UNCERTAINTY............................................................................4 3GENERAL INFORMATION.......................................................................................5 3.1GENERAL DESCRIPTION OF EUT.........................................................................5 3.1DESCRIPTION OF TEST MODES...........................................................................6 3.1.1CONFIGURATION OF SYSTEM UNDER TEST.......................................................6 3.1.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL............................7 3.2GENERAL DESCRIPTION OF APPLIED STANDARDS...........................................8 3.3DESCRIPTION OF SUPPORT UNITS......................................................................8 4TEST PROCEDURE AND RESULT..........................................................................9 4.1CONDUCTED EMISSION MEASUREMENT............................................................9 4.1.1LIMITS OF CONDUCTED EMISSION MEASUREMENT..........................................9 4.1.2TEST INSTRUMENTS..............................................................................................9 4.1.3TEST INSTRUMENTS............................................................................................10 4.1.4DEVIATION FROM TEST STANDARD..................................................................10 4.1.5TEST SETUP.........................................................................................................11 4.1.6EUT OPERATING CONDITIONS...........................................................................11 4.1.7TEST RESULTS.....................................................................................................12 4.2RADIATED EMISSION MEASUREMENT...............................................................14 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT............................................14 4.2.2TEST INSTRUMENT..............................................................................................15 4.2.3TEST PROCEDURE..............................................................................................16 4.2.4TEST SETUP.........................................................................................................17 4.2.5EUT OPERATING CONDITION.............................................................................17 4.2.6TEST RESULTS.....................................................................................................18 4PHOTOGRAPHS OF THE TEST CONFIGURATION..............................................21 5INFORMATION ON THE TESTING LABORATORIES............................................24 APPENDIX-A....................................................................................................................A-1 FCC ID: NIYMWL52-P Report No.: RF940609L153Report Format Version 2.0.4 1 CERTIFICATION PRODUCT: Cordless Laser Mouse MODEL: MWL52-P OEM MODEL: MWL45-P BRAND: DEXIN APPLICANT: DEXIN CORPORATION TESTED: Sep. 16 ~ 19, 2005 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.227), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY :, DATE:Sep. 26, 2005 Wendy Liao TECHNICAL ACCEPTANCE:, DATE:Sep. 26, 2005 Responsible for RF Gary Chang APPROVED BY:, DATE:Sep. 26, 2005 Cody Chang / Deputy Manager FCC ID: NIYMWL52-P Report No.: RF940609L154Report Format Version 2.0.4 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPERESULTREMARK 15.207Conducted Emission TestPASS Minimum passing margin is –10.97dB at 0.548MHz 15.227 15.209 Radiated Emission TestPASS Minimum passing margin is –1.79dB at 919.65MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: MEASUREMENTFREQUENCYUNCERTAINTY Conducted emissions9kHz~30MHz2.44 dB 30MHz ~ 200MHz3.55 dB 200MHz ~1000MHz3.58 dB 1GHz ~ 18GHz1.10 dB Radiated emissions 18GHz ~ 40GHz0.91 dB This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. FCC ID: NIYMWL52-P Report No.: RF940609L155Report Format Version 2.0.4 3 GENERA…

Text truncated - open the document above for the full version.

FCC ID: NIYMWL52-P Report No.: RF940609L1521Report Format Version 2.0.4 4 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST (MODE B) FCC ID: NIYMWL52-P Report No.: RF940609L1522Report Format Version 2.0.4 RADIATED EMISSION TEST (MODE A) FCC ID: NIYMWL52-P Report No.: RF940609L1523Report Format Version 2.0.4 RADIATED EMISSION TEST (MODE B)