NIYMWP51-LWWireless Numeric Keypad W/ Built In Optical Mice

User Manu Page 1 of 8 2 nd Edition RF Wireless Numeric Keypad w/Built in Optical Mice USER’S MANUAL Model #: M071017 Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: F Take frequent breaks, get up and walk around several times every hour. F Vary your tasks throughout the day. F Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. F Adjust your chair and keyboard so your upper arms and wrists are straight. F Avoid resting your wrists on sharp edges. System Requirement F Mouse compatible with Microsoft Windows 2000/ME/XP 3-Button Wheel Mouse F 3 rd button and wheel function require Win98/ME/2000/XP F If your computer’s operating system is Windows 98/ 98SE, please prepare the Windows98 or 98SE compact disk for system’s request during the installation of mouse. F 1 st , 2 nd and wheel are compatible with MAC F Numeric keypad compatible with Microsoft and MAC OS Before you begin F Keep this installation guide for future reference! It contains Important Troubleshooting Information. F Keep your old PS/2 or USB mouse as back-up devices. User Manu Page 2 of 8 2 nd Edition Getting Started Congratulations on your purchase the RF Wireless Numeric Keypad w/Built in Optical Mice. The 800dpi high resolution will bring users the best operation accuracy and efficiency, especially for a display of 1024*768 or higher. It operates at twice the speed and only requires 1/4 of the space in comparison to a 400dpi mouse. By using the advanced RF technology, there is fully 360°operation, no line-of-sight required between receiver and this mouse. A mouse/ numeric keypad mode slide switch in the top down size of the product. By sliding it, the function of this product can be switch between mouse and numeric keypad. Within 433.92MHz wireless design, this product is such match with notebook and laptop, Package Contains Your package includes the following: 1. RF Wireless Numeric Keypad w/Built in Optical Mice (Transmitter) 2. Thumb size mini Receiver 3. User’s manual 4. 2 AAA batteries NoteIf any part is missing, please contact your dealer for a replacement immediately. Precaution ! For optimal performance, place the receiver at least 8 inches or 20 centimeters away from other electrical devices, such as the computer, the computer monitor, speakers or other external storage drives. ! For best transmit distance, avoid to use this device on a metal surface because a large surface of iron, aluminum, copper and other metal will be a shielding or ground to the RF antenna of the mouse and receiver. ! If your notebook computer has a metal (contains Al or Mg) case, the LCD panel’s metal housing will isolate partial power of the RF signal from the mouse. This will result in reducing the distances of transmit when you connect the receiver on the back of LCD panel. However, the RF mouse should work properly while you are operating the mouse just beside your notebook computer. User Manu Page 3 of 8 2 nd Edition Installation Guide Step 1. Connecting the Receiver Before using this RF Mouse, you need to connect the included receiver to your computer first. Please follow the steps below to finish the connecting: 1. Turn off your computer 2. Keep a USB slot free for the receiver 3. Plug the USB receiver connector end into the USB port 4. Prepare your original Microsoft Windows CD 5. Turn the power on and then follow the instructions of Windows message for the new USB device connection Step 2. Installing the Batteries This RF wireless mouse uses 2 AAA batteries. To apply the batteries, please follow the steps as below: 1. Turn the mouse to the bottom side and remove the battery cover by moving the opening tabs and pull the battery cover out. (FIG-1) 2. There are signs to indicate batteries' positive and negative poles. Carefully follow the signs to place the batteries 3. Place the batteries cassette back and make sure it is firmly closed Battery Warning! *. When replace the batteries, use alkaline. *. You may use other type batteries, but do not mix them with alkaline. *. Do not mix used and new batteries together! Step 3 Setting up the same ID code for both of receiver and mouse Fig-1 Connect switch for ID setting (ID switch) Tab to open the battery cover User Manu Page 4 of 8 2 nd Edition This RF wireless mouse provides identification codes to avoid wrong reaction with other same model RF wireless mouse. Before you using the wireless mouse, please set the same ID code for both receiver and mouse. Establish ID connection between the receiver and the mouse. 1. Press and release the “connect “switch on the receiver (refer to Fig-2). 2. Press and release the “connect” switch on bottom of the wireless mouse (refer to Fig-1). 3. The "connect" LED on the top cover of receiver will flash while the same ID is selected on both of the receiver and the mouse. 4. When you change batteries of the mouse, you have to re-establish the connection. Using RF Wireless Numeric Keypad w/Built in Optical Mice Mouse Function 1. Make sure the connection between mouse and receiver has setup. 2. Slide the function to “Mouse” mode. 3. Using as normal mouse Fig-2 ID switch button USB Plug, connect to USB port Fig 3 Function switch Num Lock Low battery indicator Backspace User Manu Page 5 of 8 2 nd Edition Note: a. A low battery indicator in the mouse, if there is the voltage is getting low, the wheel will become red. b. In mouse mode, the LED on the button will light. Numeric keypad function 1. Make sure the connection between mouse and receiver has setup. 2. Start word/ excel or calculator 3. Slide the function to “Keypad” mode. 4. Using as normal numeric keypad. Note: a. If the “Num Lock” indicator on the keyboard in lighting, the keypad works as n…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT Page 2

JAMES JAMES
: :78-100-715 :78-100-715  :    M071017 FCC ID:NIYMWP51-LWFCCID:NIYMWP51-LW FOR HOME OR OFFICE USEFORHOMEOROFFICEUSE Made in ChinaMadeinChina S/N: 78-100-71578-100-715 Tested to Comply with FCC Standards TestedtoComply with FCCStandards WIRELESS NUMERIC KEYPAD W/ BUILT IN OPTICAL MICE WIRELESSNUMERICKEYPADW/ BUILT INOPTICALMICE

Page 3 Page 4 Page 5 Page 6

FCC ID: NIYMWP51-LW Report No.RF940513L04 Operational Description The transmitter of the EUT (WIRELESS NUMERIC KEYPAD W/ BUILT IN OPTICAL MICE) is powered by a 3Vdc battery. The transmitter uses Internal copper trace antenna and designed to operate on a fixed frequency at 433.92MHz. The output power of this device is very low. Under normal use condition, the transmitter and the receiver are quite close, so high EIRP power is neither necessary nor allowed because of interference. The other instruction, please have a look at the users manual.

FCC ID: NIYMWP51-LW Report No.: RF940513L041Report Format Version 2.0.2 FCC TEST REPORT REPORT NO.: RF940513L04 MODEL NO.: M071017 RECEIVED: May 12, 2005 TESTED: May 13 ~ May 24, 2005 ISSUED: May 25, 2005 APPLICANT: DEXIN Corporation ADDRESS: 14F-8, No 258, Lian Cheng Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C ISSUED BY: Advance Data Technology Corporation LAB ADDRESS:No. 47, 14 th Ling, Chia Pau Tsuen, Lin Kou Hsiang 244, Taipei Hsien, Taiwan, R.O.C. TEST LOCATION:No. 19, Hwa Ya 2 nd Rd., Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 15 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CNLA, A2LA or any government agencies. The test results in the report only apply to the tested sample. 0528 ILAC MRA No. 2177-01 FCC ID: NIYMWP51-LW Report No.: RF940513L042Report Format Version 2.0.2 Table of Contents 1CERTIFICATION ......................................................................................................... 3 2SUMMARY OF TEST RESULTS................................................................................. 4 2.1MEASUREMENT UNCERTAINTY .............................................................................. 4 3GENERAL INFORMATION ......................................................................................... 5 3.1 GENERAL DESCRIPTION OF EUT............................................................................ 5 3.2DESCRIPTION OF TEST MODES.............................................................................. 6 3.2.1CONFIGURATION OF SYSTEM UNDER TEST......................................................... 6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL.............................. 7 3.2GENERAL DESCRIPTION OF APPLIED STANDARDS ............................................. 7 3.3DESCRIPTION OF SUPPORT UNITS........................................................................ 7 4TEST PROCEDURE AND RESULT ............................................................................ 8 4.1CONDUCTED EMISSION MEASUREMENT .............................................................. 8 4.2RADIATED EMISSION MEASUREMENT ................................................................... 8 4.2.1LIMITS OF RADIATED EMISSION MEASUREMENT ................................................ 8 4.2.2TEST INSTRUMENT................................................................................................... 9 4.2.3TEST PROCEDURE ................................................................................................. 10 4.2.4TEST SETUP ............................................................................................................ 11 4.2.5EUT OPERATING CONDITION ................................................................................ 11 4.2.6TEST RESULTS ........................................................................................................ 12 4PHOTOGRAPHS OF THE TEST CONFIGURATION ............................................... 14 5INFORMATION ON THE TESTING LABORATORIES .............................................. 15 FCC ID: NIYMWP51-LW Report No.: RF940513L043Report Format Version 2.0.2 1 CERTIFICATION PRODUCT: WIRELESS NUMERIC KEYPAD W/ BUILT IN OPTICAL MICE BRAND NAME: iConcepts MODEL NO: M071017 TEST SAMPLE: ENGINEERING SAMPLE TESTED: May 13 ~ May 24, 2005 APPLICANT: DEXIN Corporation STANDARDS: FCC Part 15, Subpart C (Section 15.209), ANSI C63.4-2003 The above equipment has been tested by Advance Data Technology Corporation, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY:, DATE:May 25, 2005 ( Windy Chou) TECHNICAL ACCEPTANCE:, DATE:May 25, 2005 Responsible for RF ( Gary Chang ) APPROVED BY :, DATE:May 25, 2005 ( Cody Chang, Deputy Manager ) FCC ID: NIYMWP51-LW Report No.: RF940513L044Report Format Version 2.0.2 2 SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C STANDARD PARAGRAPH TEST TYPERESULTREMARK 15.207Conducted Emission TestN/A Power supply is 3Vdc from batteries 15.209Radiated Emission TestPASS Minimum passing margin is –2.23dB at 434.33MHz 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4: MEASUREMENTFREQUENCYUNCERTAINTY Conducted emissions9kHz~30MHz2.44 dB Radiated emissions30MHz ~ 200MHz3.63 dB 200MHz ~1000MHz3.65 dB 1GHz ~ 18GHz2.20 dB 18GHz ~ 40GHz1.88 dB FCC ID: NIYMWP51-LW Report No.: RF940513L045Report Format Version 2.0.2 3 GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT PRODUCT WIRELESS NUMERIC KEYPAD W/ BUILT IN OPTICAL MICE MODEL NO. M071017 POWER SUPPLY 3Vdc from batteries MODULATION TYPE ASK CARRIER FREQUENCY OF EACH CHANNEL 433.92MHz NUMBER OF CHANNEL 1 ANTENNA TYPE Internal copper trace antenna DATA CABLE NA I/O PORTS NA ASSOCIATED DEVICES NA NOTE: 1. This EUT is a Wireless Mouse with Keyboard function. 2. The above EUT information was declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. FCC ID: NIYMWP51-LW Report No.: RF940513L046Report Format Version 2.0.2 3.2 DESCRIPTION OF TEST MODES One channel was provided to this EUT. ChannelFrequency 1433.92MHz Note: There are two test modes. The test mode 1 is for the Keyboard function and test mode 2 is for the Mouse function. 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST EUT Test table (Power from battery) FCC ID: NIYMWP51-LW Report No.: RF94…

Text truncated - open the document above for the full version.

FCC ID: NIYMWP51-LW Report No.: RF940513L0414Report Format Version 2.0.2 4 PHOTOGRAPHS OF THE TEST CONFIGURATION RADIATED EMISSION TEST