NIYRX366M2.4GHz Wireless receiver

DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 1 of 9 1.0 Edition 2.4GHz Wireless Touch Optical Mouse MWP190_P6M & RX36_6M USER’S MANUAL Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, seek advice from a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: ƒ Take frequent breaks, get up and walk around several times every hour. ƒ Vary your tasks throughout the day. ƒ Keep your shoulders relaxed with your elbows at your side. Position your keyboard and mouse so you do not have to reach. ƒ Adjust your chair and keyboard so your upper arms and wrists are straight. ƒ Avoid resting your wrists on sharp edges. System Requirements ƒ Mouse compatible with standard Microsoft OS. ƒ If your computer’s operating system is Windows 98/ 98SE, please prepare the Windows98 or 98SE compact disk for system’s request during the installation. Before you begin ƒ Keep this manual for future reference! It contains Important Troubleshooting Information. ƒ Keep your old PS/2 or USB mouse as back-up devices. Getting Started Thank you for choosing the Wireless Optical Mouse. By using the advanced RF technology a 360° operation is possible and no line-of-sight is required between the receiver and the mouse. The mouse featured with 1,200dpi high resolution will bring users the best operation accuracy and efficiency, For travel, loss prevention and more power saving, the MWP190_P6M is designed to store receiver in the cavity underneath the mouse. You can use the power on/off switch to save the power. The low power indicator on top of the mouse will blink to indicate battery low power. With numerous user-friendly functions and the compact and ergonomic design, the RF mouse may offer users the best experience of utilization and convenience in traveling. DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 2 of 9 1.0 Edition Package Contains Your MWP190_P6M Mouse package includes the following: 1. The wireless Touch optical mouse 2. USB storable nano receiver 3. User’s manual 4. 2 AA alkaline batteries Note：If any part is missing, please contact your dealer for a replacement immediately. Precaution The optical mouse can not work on a glass or mirror surface. Avoid operating this mouse on a glossy surface; otherwise, this mouse may not operate normally. For conservation of battery power, it is strongly recommended to operate an optical mouse on a bright surface with fine texture to obtain lower power consumption of the high illumination LED. A very dark surface will cause higher power consumption. For optimal performance, mouse should be no more than 5M away from receiver. For a better transmission distance, avoid using this device on a metal plate or desktop because a large surface of iron, aluminum, copper and other metal will act as a shield or ground to the RF antenna of the mouse and receiver. Operating on a metal surface may shorten the transmission distance. If your notebook computer has a metal (contains Al or Mg) case, the metal housing of the LCD panel will isolate partial radiation of the RF signal from the mouse. This could possibly result in reducing the distance of transmission when you operate the mouse right in front of the notebook and when the receiver is connected on the back of the notebook. However, the RF mouse should work properly while you are operating the mouse just beside your desktop computer. DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 3 of 9 1.0 Edition Overview Using one finger to slide from front and back.---Scrolling wheel: Low Power Indicator Button #2 – Right Click Button Button #1 – Left Click Button Scrolling wheel DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 4 of 9 1.0 Edition Using one finger to slide from left and right. ---Tilt wheel: Using two fingers together slide front. --- Internet Backwards: Button #4 – Internet Backwards Tilt wheel DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 5 of 9 1.0 Edition Using two fingers together slide back. --- Internet Forwards: Hardware Installation Guide (Mouse) Battery installation: 1. Remove the battery compartment cover. 2. Install batteries with the positive (+) & negative (-) in the correct direction indicated by the battery compartment label. 3. Clip the battery cover back into place and make sure it is firmly closed. (Caution: Do not look directly in to the optical emitter. Keep away from young children) Button #5 – Internet Forwards DC190_P6M 2.4GHz Wireless Touch Optical Mouse Page 6 of 9 1.0 Edition Connect the RX36-6M receiver with computer. Plug in the USB receiver to any available USB port or hub connected to your computer. (Windows will now detect the mouse and install the required drivers automatically). CLICK ANY BUTTON, YOUR MOUSE IS NOW READY TO BE USED Note: * During normal use, please make sure that the mouse is no more than 5M away from the receiver in order to have reliable connection. Operation Guide LOW BATTERY POWER INDICATION When battery power becomes low, battery indicator LED on the top of the mouse will blink. The mouse will continue to operate for a period of time depending on usage, but batteries should be replaced immediately. OPERATIONS ON POWER SAVING MODE In order to conserve battery power, the mouse is is also designed with the consideration of the trade-off between friendly usage and power consumption. Stages of power consumption include normal operation and idle. The idle mode is entered immediately upon stopping moving mouse. The optical sensor of the mouse will reduce current consumption gradually. In idle mode, moving the mouse can bore the mouse back to work. POWER ON/OFF: For the consideration of traveling purpose, this mouse designed a slide switch at the bottom of the mouse, which provides a power ON/ OFF function to avoid inadvertently waking up the mouse, thus saving more battery life. BAT…

Text truncated - open the document above for the full version.

Page 1 CONSTRUCTION PHOTOS OF EUT

Page 2 Page 3

FCC ID: NIYRX366M Report No.: RF991014C20 Operational Description The transmitter of the EUT (2.4GHz Wireless receiver) is powered from host equipment. The antenna is copper trace antenna without antenna connector. For more detailed instruction, please take a look at the user’s manual.

Report No.: RF991014C20 1 Report Format Version 3.0.1 FCC TEST REPORT REPORT NO. :RF991014C20 MODEL NO. :RX36_6M FCC ID:NIYRX366M RECEIVED :Oct. 14, 2010 TESTED :Oct. 25 ~ Oct. 26, 2010 ISSUED :Oct. 29, 2010 APPLICANT : DEXIN Corporation ADDRESS : 14F-8, No 258, Lian Cheng Rd., Chung Ho City, Taipei Hsien, Taiwan, R.O.C ISSUED BY : Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS : No. 47, 14th Ling, Chia Pau Tsuen, Lin Kou Hsiang, Taipei Hsien 244, Taiwan, R.O.C. TEST LOCATION : No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This test report consists of 30 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product, certification, approval or endorsement by TAF or any government agency. The test results in the report only apply to the tested sample. The test results in this report are traceable to the national or international standards. Report No.: RF991014C20 2 Report Format Version 3.0.1 Table of Contents 1. CERTIFICATION ..................................................................................................... 3 2. SUMMARY OF TEST RESULTS ............................................................................. 4 2.1 MEASUREMENT UNCERTAINTY .......................................................................... 4 3. GENERAL INFORMATION...................................................................................... 5 3.1 GENERAL DESCRIPTION OF EUT........................................................................ 5 3.2 DESCRIPTION OF TEST MODES.......................................................................... 6 3.2.1 CONFIGURATION OF SYSTEM UNDER TEST ..................................................... 6 3.2.2 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .......................... 7 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ......................................... 9 3.4 DESCRIPTION OF SUPPORT UNITS .................................................................... 9 4. TEST TYPES AND RESULTS ............................................................................... 10 4.1 RADIATED EMISSION MEASUREMENT ............................................................. 10 4.1.1 LIMITS OF RADIATED EMISSION MEASUREMENT........................................... 10 4.1.2 TEST INSTRUMENTS .......................................................................................... 11 4.1.3 TEST PROCEDURES ........................................................................................... 12 4.1.4 DEVIATION FROM TEST STANDARD ................................................................. 12 4.1.5 TEST SETUP ........................................................................................................ 13 4.1.6 EUT OPERATING CONDITIONS .......................................................................... 13 4.1.7 TEST RESULTS .................................................................................................... 14 4.2 CONDUCTED EMISSION MEASUREMENT ........................................................ 20 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT...................................... 20 4.2.2 TEST INSTRUMENTS .......................................................................................... 20 4.2.3 TEST PROCEDURES ........................................................................................... 21 4.2.4 DEVIATION FROM TEST STANDARD ................................................................. 21 4.2.5 TEST SETUP ........................................................................................................ 22 4.2.6 EUT OPERATING CONDITIONS .......................................................................... 22 4.2.7 TEST RESULTS .................................................................................................... 23 4.3 BAND EDGES MEASUREMENT .......................................................................... 25 4.3.1 LIMITS OF BAND EDGES MEASUREMENT ....................................................... 25 4.3.2 TEST INSTRUMENTS .......................................................................................... 25 4.3.3 TEST PROCEDURE ............................................................................................. 25 4.3.4 DEVIATION FROM TEST STANDARD ................................................................. 25 4.3.5 EUT OPERATING CONDITION ............................................................................ 25 4.3.6 TEST RESULTS .................................................................................................... 26 5. PHOTOGRAPHS OF THE TEST CONFIGURATION............................................ 28 6. INFORMATION ON THE TESTING LABORATORIES .......................................... 29 7. APPENDIX A - MODIFICATIONS RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB................................................................................... 30 Report No.: RF991014C20 3 Report Format Version 3.0.1 1. CERTIFICATION PRODUCT: 2.4GHz Wireless receiver MODEL NO.: RX36_6M BRAND: Dexin APPLICANT: DEXIN Corporation TESTED: Oct. 25 ~ Oct. 26, 2010 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.4-2003 The above equipment (model: RX36_6M) have been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE :Oct. 29, 2010 Polly Chien / Specialist TECHNICAL ACCEPT…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 3 RADIATED EMISSION TEST 4