NL3EL0001Electric Meter

REV.ECO No.APPROVEDNAMESIGNATURE AFirst release NAMESIGNATUREDATEDESCRIPTION: Product Manager R&D Manager FINAL ASSEMBLY Testing AMR UNIT Manufacturing Eng.Shay Aharon ELEC METER CENTRON QA EngineeringShay Aharon SH 1 OFDRAW No. DC00017-001 REV. A DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _2_ OF_10_ DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _3_ OF_10_ Table of Contents Mechanical Assembly Description......................................4 Pcb............................................................................................4 Display......................................................................................5 Main Board With Display..........................................................7 Labels Assemble & Rev / Ver Label......................................7 Main Board With The Meter.....................................................8 Power Supply Connector.........................................................8 First Cover................................................................................9 ID Labels & Rev / Ver Label...................................................9 Last cover...............................................................................10 DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _4_ OF_10_ Mechanical Assembly Description FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. Pcb Solder the capacitors and transformer to the main-board at 10 soldering pads. DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _5_ OF_10_ Display Build the display and use with the holder plastic, lcd and zebra strip. DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _6_ OF_10_ DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _7_ OF_10_ Main Board With Display Assemble the display on the main board. Labels Assemble & Rev / Ver Label Place Assembly, Rev / Ver and serial number labels on the main board. DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _8_ OF_10_ Main Board With The Meter Assemble the main board on the meter hold it with the 4 clips. Power Supply Connector Assemble the connector from the meter to main board. DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _9_ OF_10_ First Cover Place the cover on the top of meter. ID Labels & Rev / Ver Label Place ID label on the plastic cover marked positions & Rev / Ver label. DRAW NO.: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _10_ OF_10_ Last cover Place the last cover on the top of meter.

REV.ECO No.APPROVEDNAMESIGNATURE AFirst release NAMESIGNATUREDATEDESCRIPTION: Product Manager R&D Manager FINAL ASSEMBLY Testing AMR UNIT Manufacturing Eng.Shay Aharon ELEC METER CENTRON QA EngineeringShay Aharon SHOFDRAW No.REV. DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _2_ OF_ 9 _ 1 DC00017-001 A DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _3_ OF_ 9 _ Table of Contents Mechanical Assembly Description......................................1 Pcb.......................................................................................1 Display..................................................................................1 Main Board With Display.......................................................1 Labels Assemble & Rev / Ver Label ......................................1 Main Board With The Meter ..................................................1 Power Supply Connector.......................................................1 First Cover ............................................................................1 ID Labels & Rev / Ver Label ..................................................1 Last cover .............................................................................1 DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _4_ OF_ 9 _ Mechanical Assembly Description FCC Warning Modifications not expressly approved by the manufacturer could void the user authority to operate the equipment under FCC Rules. In order to comply with FCC RF Exposure requirements, the AMR unit must be installed in such a way that there is a 20 c”m separation distance between it and all persons during normal operation. DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _5_ OF_ 9 _ Pcb Solder the capacitors and transformer to the main-board at 10 soldering pads. DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _6_ OF_ 9 _ Display Build the display and use with the holder plastic , lcd and zebra strip . DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _7_ OF_ 9 _ DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _8_ OF_ 9 _ Main Board With Display Assemble the display on the main board . Labels Assemble & Rev / Ver Label Place Assembly, Rev / Ver and serial number labels on the main board. DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _9_ OF_ 9 _ Main Board With The Meter Assemble the main board on the meter hold it with the 4 clips. Power Supply Connector Assemble the connector from the meter to main board. DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _10_ OF_ 9 _ First Cover Place the cover on the top of meter. ID Labels & Rev / Ver Label Place ID label on the plastic cover marked positions & Rev / Ver label . DRAW NO .: DC00017-001 DESCRIPTION: FINAL ASSEMBLY AMR UNIT ELEC METER CENTRON REV B SH. _11_ OF_ 9 _ Last cover Place the last cover on the top of meter .

40mm 15mm Figure 1. FCC Label Figure 2. Location of Label on EUT FCC ID: NL3EL0001 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE. (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

R.F Exposure/Safety The E.U.T. is installed in fixed locations for application of transmitting data of electricity consumption to central data collection offices. The distance between the E.U.T. and the general population is at least several meters. Calculation of Maximum Permissible Exposure (MPE) Based on Section 1.1307(b)(1) Requirements (a) FCC limits at 915 MHz Using table 1 of Section 1.1310 limit for general population/uncontrolled exposures, the above level is an average over 30 minutes. (b) The power density produced by the E.U.T. is P t - Transmitted Power 1000mw (Peak) G T - Antenna Gain, 1(0dB) R- Distance from Transmitter using 100cm worst case (c) The peak power density is : (d) The duty cycle of transmission in actual worst case is 150 msec pulses per 60 sec intervals. The average power over 30 minutes is: (e) The averaged power density of the E.U.T. is: (f) This is significantly below the FCC, MPE limit (0.61 mW/cm 2) . 2 61.0 1500 915 cm mW S== 2 4R GP S tt π = 22 3 96.7 )100(4 110 cm mWx S p == π mWP AV 5.2 60 15.01000 = × = 2 5 2 102 )100(4 15.2 cm mW X x X S AV − == π

Electrical (EMC) Test Report E42640.01Nexus Data (1993) Ltd. Page 1 of 108 FCC ACC M Ver 1.1 05Mayl 2000 DATE: 01 January 2002 I.T.L. (PRODUCT TESTING) LTD. EMC Test for Nexus Data (1993) Ltd. Equipment under test: Electric Meter Schlumberger Approved by:_____________________________ I. Raz, EMC Laboratory Manager This report must not be reproduced, except in full, without the written permission of I.T.L. (Product Testing) Ltd. This report relates only to items tested. Electrical (EMC) Test Report E42640.01Nexus Data (1993) Ltd. Page 2 of 108 FCC ACC M Ver 1.1 05Mayl 2000 Measurement/Technical Report for Nexus Data (1993) Ltd. Electric Meter: Schlumberger FCC ID:NL3EL0001 01 January 2002 This report concerns:Original Grant x Class II change Class B verification Class A verification Class I change Equipment type: Radio Telemetry Transmitter Request Issue of Grant: x Immediately upon completion of review Limits used: CISPR 22 Part 15 x Measurement procedure used is ANSI C63.4-1992. Application for Certification Applicant for this device: prepared by:(different from "prepared by") Ishaishou RazShimon Zigdon ITL (Product Testing) Ltd.Nexus Data (1993) Ltd. Kfar Bin Nun16 Hamelacha St. D.N. Shimshon 99780Rosh Haayin 48091 IsraelIsrael e-mail [email protected]:+972-903-2288 Fax:+972-903-32299 e-mail: [email protected] Test Report E42640.00Nexus Data (1993) Ltd. Page 3 of 108 FCC ACC M Ver 1.1 05Mayl 2000 TABLE OF CONTENTS 1.GENERAL INFORMATION------------------------------------------------------------------------------------------5 1.1Administrative Information...........................................................................5 1.2Product Description....................................................................................6 1.3Test Methodology.......................................................................................7 1.4Test Facility...............................................................................................7 1.5Measurement Uncertainty...........................................................................7 2.PRODUCT LABELING------------------------------------------------------------------------------------------------8 3.SYSTEM TEST CONFIGURATION-------------------------------------------------------------------------------9 3.1Justification...............................................................................................9 3.2EUT Exercise Software..............................................................................13 3.3Special Accessories..................................................................................13 3.4Equipment Modifications............................................................................13 3.5Configuration of Tested System..................................................................14 4.BLOCK DIAGRAM-----------------------------------------------------------------------------------------------------15 4.1Schematic Block/Connection Diagram........................................................15 4.2Theory of Operation...................................................................................16 5.CONDUCTED AND RADIATED MEASUREMENT PHOTOS------------------------------------------17 6.CONDUCTED EMISSION-------------------------------------------------------------------------------------------19 6.1Test Specification......................................................................................19 6.2Test Procedure.........................................................................................19 6.3Measured Data.........................................................................................20 6.4Test Instrumentation Used, Conducted Measurement...................................33 7.RADIATED EMISSION, BELOW 1 GHZ-----------------------------------------------------------------------34 7.1Test Specification......................................................................................34 7.2Test Procedure.........................................................................................34 7.3Measured Data.........................................................................................35 7.4Test Instrumentation Used, Radiated Measurements....................................48 7.5Field Strength Calculation..........................................................................49 8.RADIATED EMISSION ABOVE 1 GHZ-------------------------------------------------------------------------50 1.1Radiated Emission Above 1 GHz................................................................50 8.2Test Data.................................................................................................50 8.3Test Instrumentation Used, Radiated Measurements Above 1 GHz................83 9.MAXIMUM TRANSMITTED PEAK POWER OUTPUT---------------------------------------------------84 9.1Test procedure..........................................................................................84 9.2Results table............................................................................................86 9.3Test Equipment Used................................................................................87 10.PEAK POWER OUTPUT OUT OF 902-928 MHZ BAND-------------------------------------------------88 10.1Test procedure..........................................................................................88 10.2Results table............................................................................................90 10.3Test Equipment Used................................................................................91 11.6 DB MINIMUM BANDWIDTH-------------------------------------------------------------------------------------92 11.1Test procedure..........................................................................................92 11.2Results table............................................................................................…

Text truncated - open the document above for the full version.