NM82PR7100Vive Controller

Safety and regulatory guide The health and safety warnings in this guide are periodically updated for accuracy and completeness. Check www.htcvive.com for the latest version. 2 Important ImportantImportant Important Safety Informat Safety InformatSafety Informat Safety Information ion ion ion – –– – Read Before Use Read Before UseRead Before Use Read Before Use Read the following warnings and information before use of the Read the following warnings and information before use of the Read the following warnings and information before use of the Read the following warnings and information before use of the product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. product and follow all product safety and operating instructions. Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and Failure to do so may cause bodily injury, electric shock, fire, and other damag other damagother damag other damage. e.e. e. Ensure You Are Able to Ensure You Are Able to Ensure You Are Able to Ensure You Are Able to Safely Use the Prodcut Safely Use the ProdcutSafely Use the Prodcut Safely Use the Prodcut Consult your doctor before using the product if you have pre-existing serious medical conditions (such as a heart ailment), conditions that affect your ability to safely perform physical activities, psychiatric conditions (such as anxiety disorders or post-traumatic stress disorder), or if you are pregnant or elderly. Do not use the product if you are sick, fatigued, under the influence of intoxicants/drugs, or are not feeling generally well, as it may exacerbate your condition. En EnEn Ensure the Area Around You is Safe for Use of the Product sure the Area Around You is Safe for Use of the Productsure the Area Around You is Safe for Use of the Product sure the Area Around You is Safe for Use of the Product While wearing the product’s headset you are blind to the world around you. The image displayed in the headset will not match the real world. Always use the product in a clear and safe area. Do not rely on the product’s chaperone system for protection. Do not use near stairways, large windows, heat sources, or outdoors. Clear the play area of people, furniture, and other things that may be obstacles or block you from freely moving around. For example, if a pet comes into the room while you are using the product, you likely will not be aware of the pet’s presence and you could trip over your pet while moving in the virtual reality environment. It is recommended that the product be used only while under the supervision of another person who is ready to warn of hazards that may arise while the product is being used. Examples of hazards that could arise include, but are not limited to, tangling of a cable in a manner that presents a tripping hazard, pets entering the area where the product is being used, and the user walking too close to a wall or another hazard). 3 Be Aware of the Cable and Connections Be Aware of the Cable and ConnectionsBe Aware of the Cable and Connections Be Aware of the Cable and Connections Keep in mind the location of the cable and connections running from the headset so that you are not likely to trip over or pull on them while moving around or walking around the play area. Move your feet slowly and carefully to avoid tripping, including on the cable. Make sure to maintain good footing. Tripping over the cable or contacting obstacles could cause injury or damage. Take Care of the Controllers Take Care of the ControllersTake Care of the Controllers Take Care of the Controllers While using the hand controllers, always check that you have sufficient overhead and surrounding clearance to allow you to fully extend your arms outward and upwards. Hitting persons or objects may cause injury or damage. Hold the controllers firmly and always use the wrist straps. If released while using, the controller may cause injury or damage. Photosensitive Seizures Photosensitive SeizuresPhotosensitive Seizures Photosensitive Seizures Like other products that produce visual effects (including light flashes), the product may trigger epileptic seizures, seizures, fainting, or severe dizziness even in people who have no history of these conditions. If you have a previous history of epilepsy or seizures, loss of awareness, or other symptoms linked to an epileptic condition, consult your doctor before using the product. To reduce the likelihood of a seizure do not use the product if you are tired or need sleep. Repetitive Stress Injuries Repetitive Stress InjuriesRepetitive Stress Injuries Repetitive Stress Injuries Operate the product in a comfortable posture. Do not grip the product too tightly. Press the buttons lightly. If you have tingling, numbness, stiffness, throbbing, or other discomfort, immediately stop using the product and consult your doctor. Physical PhysicalPhysical Physical and P and Pand P and Psychological sychological sychological sychological E EE Effects ffectsffects ffects Content viewed using the product can be intense, immersive, and appear very life-like and may cause your brain and body to react 4 accordingly. Certain types of content (e.g. violent, scary, emotional, or adrenaline-based content) could trigger increased heart rate, spikes in blood pressure, panic attacks, anxiety, PTSD, fainting, and other adverse effects. If you have a history of negative physical or psychological reactions to certain real life circumstances, avoid using the product to view similar content. Similarly, it is important to remember that simulated objects, such as furniture, that may be encountered while using the product do not exist in the real world, and injuries may result when interacting with those simulated objects a…

Text truncated - open the document above for the full version.

HTC Vive PRE (Developer Edition) Confidential For review only Contents Unboxing About Vive4 Vive headset4 Link box10 Vive controllers11 Vive base stations13 Getting started Setting up Vive for the first time16 What is the play area?16 Choosing the play area16 Setting up the play area17 Exploring Vive19 Troubleshooting and FAQs General21 Tracking22 Setup22 Trademarks and copyrights 2Contents Confidential For review only About this guide In this user guide, we use the following symbols to indicate useful and important information: This is a note. A note often gives additional information, such as what happens when you choose to do or not to do a certain action. A note also provides information that may only be applicable to some situations. This is a tip. A tip gives you an alternative way to do a particular step or procedure, or lets you know of an option that you may find helpful. This indicates important information that you need in order to accomplish a certain task or to get a feature to work properly. This provides safety precaution information, that is, information that you need to be careful about to prevent potential problems. 3About this guide Confidential For review only Unboxing About Vive With Vive ™ , you can look and move around a room-scale virtual environment. Because your physical location is tracked, you can explore and interact within immersive fantasy worlds. About Vive PRE (Developer Edition) Vive PRE includes the headset, controllers, and base stations that you need to start creating interactive VR experiences. In-box items may vary from the consumer version. Do not disassemble any of the hardware as it could injure you or damage the product. Vive headset The headset is your window to the VR environment. Do not cover the sensors on the headset as these are tracked by the base stations. 1Camera lens 2Tracking sensor 3Camera button 4Status light 5Lens distance knob 4Unboxing Confidential For review only 1Strap 2Audio cable 33-in-1 headset cable 4IPD (interpupillary distance) knob 5Face cushion 6Lenses 7P-sensor 8Lens distance knobs §Only use the cleaning cloth provided in the box to wipe the lenses. §Do not cover the P-sensor. Putting the headset on 1.Pull the headset down over your eyes. 2.Slide the straps around the back of your head, and adjust them so that the headset fits snugly and comfortably. 5Unboxing Confidential For review only Adjusting the lens distance on the headset The closer the lenses are to your eyes, the better the field of view. If you need to wear prescription glasses while using Vive, adjust the lens distance for space to fit your glasses in. 1.Pull out each lens distance knob to unlock it. 2.Rotate both lens distance knobs to adjust the lens further or closer to your face. 3.After you're done adjusting, push each knob to lock it back in. 6Unboxing Confidential For review only Using the IPD knob on the headset Interpupillary distance (IPD) is the distance between the center of the pupils in your eyes. A quick way to get an estimate is by facing a mirror and holding a millimeter ruler against your brow. Use this measurement as a guide to adjust the distance between the lenses of the headset so that you'll have a better viewing experience. To change the distance between the lenses, rotate the IPD knob. As you adjust the IPD, you'll see information about the current distance between the lenses. 7Unboxing Confidential For review only Connecting a USB device to the headset Plug in the USB 3.0 cable to the headset for using a compatible third-party device with Vive. 1.Push open the compartment cover to access the connector slots on the headset. 2.Plug in the USB cable to its corresponding slot. 3.Connect the third-party device to the USB cable end. 8Unboxing Confidential For review only Cleaning or replacing the face cushion Remove the face cushion to clean sweat or makeup stains from the foam or to replace it with the spare face cushion that comes in the box. 1.To remove the face cushion, peel off the foam starting from both ends of the face cushion until it detaches from the headset. 2.When cleaning the face cushion, hand wash with water or use toning lotion to remove makeup stains. Do not scrub, bleach, iron, or tumble dry. 3.To replace the face cushion, attach the adhesive strip to the frame on the headset. 9Unboxing Confidential For review only Headset status light The status light shows: §White when the headset is active §Flashing white when the headset is not tracked §Flickering white when the headset is on standby §Red when an error is encountered (with cables, display, or the like) Link box Use the link box to connect the headset to your computer. 13-in-1 cable 2Power port 3USB port 4Mini DisplayPort ™ Note: Cable is not provided. Use if your computer doesn’t support HDMI. 5HDMI port Connecting the headset to your computer 1.Connect the power adapter cable on its corresponding port on the link box, and then plug the opposite end into an electrical outlet to turn the link box on. 2.Insert the HDMI cable on the HDMI port on the link box, and then insert the opposite end on the HDMI port on your computer's graphic card. 10Unboxing Confidential For review only 3.Insert the USB cable on the USB port on the link box, and then insert the opposite end on your computer's USB port. 4.Connect the 3-in-1 headset (HDMI, USB, and power) cables on the side with matching orange trims on the link box. Vive controllers Use the controllers to interact with objects in the VR world. Do not cover the sensors on the controllers as these are tracked by the base stations. 11Unboxing Confidential For review only 1Menu button 2Trackpad 3System button 4Status light 5USB charging adapter 6Tracking sensor 7Trigger 8Grip button Charging the controllers Charge each controller using the USB cable provided. The status light shows a solid white when the controller is fully charged. Turning the controllers on or off §To turn the controller on, press the System button until you h…

Text truncated - open the document above for the full version.

Issue Date: Dec. 14, 2015 Page: 1 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group INTERNAL PHOTOGRAPHS OF EUT All View of EUT Front View of EUT Issue Date: Dec. 14, 2015 Page: 2 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Back View of EUT Side View of EUT – 1 Issue Date: Dec. 14, 2015 Page: 3 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/新北市五股區新北產業園區五工路134號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Side View of EUT – 2 Side View of EUT – 3 Issue Date: Dec. 14, 2015 Page: 4 of 6 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this docume…

Text truncated - open the document above for the full version.

Label & Location Back Side Location

Report No.: ER/2015/A0030 Page: 1 of 46 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-327 9f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT INTENTIONAL RADIATOR CERTIFICATION TO FCC PART 15 SUBPART C REQUIREMENT AND INDUSTRIAL CANADA RSS-210 REQUIREMENT OF Product Name: Vive controller Brand Name: HTC Model No.: 2PR7100 Model Difference: N/A FCC ID: NM82PR7100 IC: 4115A-2PR7100 Report No.: ER/2015/A0030 Issue Date: Nov. 13, 2015 FCC Rule Part: §15.249 IC Rule Part: RSS-210 Issue 8 , Dec. 2010 FCC Prepared for: HTC Corporation 1F, 6-3 Baoqiang Road, Xindian District, New Taipei City 231, Taiwan IC Prepared for: HTC Corporation 1F, No. 6-3, Baoqiang Rd Xindian City Taipei Taiwan Prepared by: SGS Taiwan Ltd. Electronics & Communication Laboratory No.134, Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803 Note: This report shall not be reproduced except in full, without the written approval of SGS Taiwan Ltd. This document may be altered or revised by SGS Taiwan Ltd. personnel only, and shall be noted in the revision section of the document. Report No.: ER/2015/A0030 Page: 2 of 46 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group VERIFICATION OF COMPLIANCE FCC Applicant: HTC Corporation 1F, 6-3 Baoqiang Road, Xindian District, New Taipei City 231, Taiwan IC Applicant: HTC Corporation 1F, No. 6-3, Baoqiang Rd Xindian City Taipei Taiwan Product Name: Vive controller Brand Name: HTC Model No.: 2PR7100 Model Difference: N/A FCC ID: NM82PR7100 IC: 4115A-2PR7100 File Number: ER/2015/A0030 Date of test: Oct. 07, 2015 ~ Nov. 13, 2015 Date of EUT Received: Oct. 07, 2015 We hereby certify that: The above equipment was tested by SGS Taiwan Ltd. Electronics & Communication Laboratory The test data, data evaluation, test procedures, and equipment configurations shown in this re- port were made in accordance with the procedures given in ANSI C63.10:2013 and the energy emitted by the sample EUT tested as described in this report is in compliance with conducted and radiated emission limits. The test results of this report relate only to the tested sample identified in this report. Test By: Date Nov. 13, 2015 JJ Chen / Engineer Prepared By: Date Nov. 13, 2015 Karen Huang / Clerk Approved By: Date Nov. 13, 2015 Jim Chang / Asst. Manager Report No.: ER/2015/A0030 Page: 3 of 46 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations unde…

Text truncated - open the document above for the full version.

Report No.: ER/2015/A0030 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group PHOTOGRAPHS OF SET UP Radiated Emission Set up Photos (Below 1GHz) Report No.: ER/2015/A0030 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Radiated Emission Set up Photos (Above 1GHz) Report No.: ER/2015/A0030 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group AC Power-line Conducted Emission Set up Photo Report No.: ER/2015/A0030 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 說留不 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for elec- tronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or ap- pearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,WuKungRoad,NewTaipeiIndustrialPark,WukuDistrict,NewTaipeiCity,Taiwan24803/北北路134 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group Conducted Setup Photo (…

Text truncated - open the document above for the full version.