NMTPE961Activity Tracker

Trio® is a trademark of Fortify Technologies, LLC. Page 1 Trio® Activity Tracker PE961 model User Manual Trio® is a trademark of Fortify Technologies, LLC. Page 2 Package contents The product contains the following items: • Trio ® Activity Tracker • Strap • Clip • USB Key • USB Charger Trio® is a trademark of Fortify Technologies, LLC. Page 3 Trio ® Tracker layout Charging the Trio® 1. Snap in the Trio ® Tracker to the USB charger. Please follow (a) and (b) procedures. (a) Trio® is a trademark of Fortify Technologies, LLC. 2. After being snapped is a trademark of Fortify Technologies, LLC. (b) being snapped in, plug the end of the USB cable into the USB port of your PC. Page 4 , plug the end of the USB cable into the USB port of your PC. Trio® is a trademark of Fortify Technologies, LLC. Page 5 Attaching Trio® to the clip In attaching the Trio® to the clip, locate the “arrow” sign of the clip and the Trio® Tracker as this is your guide so that it will fit accordingly. See example images. (a) Top View (b) Rear View Attaching Trio® to the strap In attaching the Trio® to the strap, locate the “arrow” sign of the strap and the Trio® Tracker as this is your guide so that it will fit accordingly. See example image. Trio® is a trademark of Fortify Technologies, LLC. Detaching Trio® from To remove the Trio® Activity then push both edge of the Tracker. To remove the Trio® Activity then on the left side facing inwards, Setting up Trio® If you haven’t activated your Trio 1. Tap your Trio® Activity 2. Plug the wireless USB key into your computer. 3. Download and install the Trio sync To download the Trio® application to your Android/iOS smartphone or tablets, visit first the Compatible Devices page. is a trademark of Fortify Technologies, LLC. from the Clip or Strap Activity Tracker from the Strap, locate the Trio® logo facing inwards, and then push both edge of the Tracker. Activity Tracker from the clip, locate the letter “ T “ of the Trio then on the left side facing inwards, push both edge of the Tracker. ® Tracker your Trio® yet, or you need to replace it: ctivity Tracker to wake it up for the first time. Plug the wireless USB key into your computer. Download and install the Trio syncing software. application to your Android/iOS smartphone or tablets, visit first the Page 6 logo facing inwards, and Tracker from the clip, locate the letter “ T “ of the Trio® logo and application to your Android/iOS smartphone or tablets, visit first the Trio® is a trademark of Fortify Technologies, LLC. Wearing To calculate your movement accurately, • Using the Clip • Using the Strap Syncing To sync the Trio® with your computer, you website and then you need to plug in the USB key. login first before downloading the app The Trio® will sync automatically throughout the day if your computer is on, the USB key is plugged in, and the Trio is within 20 feet is a trademark of Fortify Technologies, LLC. To calculate your movement accurately, wear the Trio® Tracker close to your body. with your computer, you have to download and install the sync app from our website and then you need to plug in the USB key. Please refer to this link login first before downloading the application.) sync automatically throughout the day if your computer is on, the USB key is plugged in, and the Trio is within 20 feet range from the computer. Page 7 close to your body. the sync app from our link. (Note: You need to sync automatically throughout the day if your computer is on, the USB key is Trio® is a trademark of Fortify Technologies, LLC. Page 8 To sync your Trio ® manually: 1. Launch the application. 2. Wait for the message “Insert a USB key to sync your Trio”. 3. Once displayed, insert/plug-in the USB key. 4. Wait for the message “Ready to sync”. 5. Using your Trio ® tracker, go to “SYNC” screen then press and hold any of the touch sensors for at least 3 seconds. ( Note: There’s a syncing animation after pressing any of the touch sensors. ) 6. Wait until the syncing is completed. You can also sync with our mobile sync app using Android/iOS smartphones and tablets that have the Bluetooth 4.0 or Bluetooth Low Energy (BLE) capability. Specifications Type Description General Type Wearable / clip-on Tracking metrics Motion / Steps, Calories, Distance Processor nRF-51822 Memory 2Mb Water Resistance 3 ATM Power Rechargeable battery Yes Battery life Approx. 7-10 days Battery charging time Approx. 30 – 60 minutes Syncing and connectivity Syncing type Wireless (Bluetooth Low Energy) Display Screen resolution 128 x 36 mm Screen type OLED Trio® is a trademark of Fortify Technologies, LLC. Page 9 FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet …

Text truncated - open the document above for the full version.

1 Photographs - EUT Constructional Details Test model No.:PE961 SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 2 of 4 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 3 of 4 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 4 of 4 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

-LASER LOGO Mark 2014-10-6 Laser 4 INKFILLED COLOR: WHITE (IN THE SLEEVE) -LASER LOGO (on silicone sleeve) -LASER LOGO -LASER LOGO 961-0002000001 Add CE&BIN LOGO

1 Photographs - EUT Constructional Details Test model No.:PE961 SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 2 of 3 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 3 of 3 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.”

SGS-CSTC Standards Technical Services Co., Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM1141000579302 Page: 1 of 6 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page SAR Evaluation Report Application No.: SZEM1410005793RF Applicant: IDT Technology Limited Manufacturer: IDT Technology Limited Factory: IDT Technology Limited Product Name: Activity Tracker Model No.(EUT): PE961 Trade Mark: Trio™, Trio®, Oregon scientific FCC ID: NMTPE961 Standards: 47 CFR Part 1.1307(2013) 47 CFR Part 2.1093 (2013) KDB447498D01 General RF Exposure Guidance v05 Date of Receipt: 2014-10-24 Date of Test: 2014-10-30 to 2014-11-04 Date of Issue: 2014-11-07 Test Result : PASS* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000579302 Page: 2 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-11-07 Original Authorized for issue by: Tested By 2014-11-04 (Apple Sun) /Project Engineer Date Prepared By 2014-11-07 (Sade Luo) /Clerk Date Checked By 2014-11-10 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Co., Ltd. Report No.: SZEM141000579302 Page: 3 of 6 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm . Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Contents Page 1 COVER PAGE ......................................................…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Ltd. No. 1 W orkshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 Telephone: +86 (0) 755 2601 2053 Fax: +86 (0) 755 2671 0594 Email: [email protected] Report No.: SZEM141000579301 Page: 1 of 48 Authorized Signature: Jack Zhang EMC Laboratory Manager The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical Approvals in writing. The report must not be used by the client to claim product certification, approval, or endorsement by NVLAP, NIST, or any agency of the federal government. All test results in this report can be traceable to National or International Standards. “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 1 Cover page FCC REPORT Application No: SZEM1410005793RF Applicant: IDT Technology Limited Manufacturer: IDT Technology Limited Factory: IDT Technology Limited Product Name: Activity Tracker Model No.(EUT): PE961 Trade Mark: Trio™, Trio®, Oregon scientific FCC ID: NMTPE961 Standards: 47 CFR Part 15, Subpart C (2013) Date of Receipt: 2014-10-24 Date of Test: 2014-10-30 to 2014-11-04 Date of Issue: 2014-11-07 Test Result: PASS * * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 2 of 48 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 2 Version Revision Record Version Chapter Date Modifier Remark 00 2014-11-07 Original Authorized for issue by: Tested By 2014-11-04 (Apple Sun) /Project Engineer Date Prepared By 2014-11-07 (Sade Luo) /Clerk Date Checked By 2014-11-10 (Emen Li) /Reviewer Date SGS-CSTC Standards Technical Services Ltd. Report No.: SZEM141000579301 Page: 3 of 48 “This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” 3 Test Summary Test Item Test Requirement Test method Result Antenna Requirement 47 CFR Part 15, Subpart C Section 15.203/15.247 (c) ANSI C63.10 2009 PASS Conducted Peak Outpu…

Text truncated - open the document above for the full version.

1 Photographs - EUT Test Setup Test model No.:PE961 1.1 Radiated Emission 1.2 Radiated Spurious Emission